SMC Networks EliteConnect WAP5110 Specifications

www.smc.com
www.smc-asia.com

Connect Your World ...

Switches | Wireless | Broadband | Carrier Ethernet | Network Management

WAP5110

802.11n Dual-Band Wireless Access Point

Product Overview

The WAP5110 is an indoor 802.11a/b/g/n dual-band, dual-radio enterprise AP with a 2x2 MIMO antenna configuration.
Through its Gigabit Ethernet port the 802.11n dual-band wireless AP can connect to the backbone network. The WAP5110
supports 802.3af PoE, which enables the AP to be powered remotely by a PoE switch. An AC power adapter option is also
included for locations where PoE is not available.

Key Features and Benefits

Wireless 802.11n Technology

Using 802.11n MIMO (Multiple Input Multiple Output)
wireless technology, the AP supports two transmitting
and two receiving antennas that extend range and
increase the throughput by up to nine times that of
existing Wi-Fi.

Full Management Capabilities

The WAP5110 supports Simple Network Management
Protocol (SNMP v1/v2c/v3), including MIB II and MIB I.
The IEEE 802.1X authentication protocol supports
Extensible Authentication Protocol (EAP) MD5, Transport
Layer Security (TLS), Protected EAP (PEAP), Tunneled
TLS (TTLS), EAP-SIM, and EAP-AKA.

Application Diagram

Advanced Traffic Management

Support for up to sixteen Virtual Access Point (VAP)
interfaces per radio, which allows traffic to be separated for
different user groups within the same service area. Each radio
can support up to 100 wireless clients, shared between all
VAPs, whereby the clients associate with each VAP in the
same way as they would with physically separate APs. This
means that each VAP can be configured with its own Service
Set Identification (SSID), security settings, VLAN
assignments, and other parameters, allowing the AP to serve
a diverse range of client needs from a single unit.

Dual-Band Access Point

Easy on your budget and simple to install, the AP uses
dynamic rate shifting to automatically match the best
connection speed, keeping users connected to the network
even while roaming.

WDS Links

Between Access Points

VAP 0

WDS STA Mode

VAP 2

AP Mode

VAP 0

WDS STA Mode

VAP 2

AP Mode

VAP 0

WDS AP Mode

VAP 1

AP Mode

VAP 0

WDS STA Mode

VAP 1

WDS AP Mode

VAP 0

WDS STA Mode

VAP 1

WDS AP Mode

VAP 1

AP Mode

Network

Core

www.smc.com
www.smc-asia.com

Connect Your World ...

Switches | Wireless | Broadband | Carrier Ethernet | Network Management

Features

Physical Features

One 10/100/1000BASE-T Gigabit Ethernet (RJ-45) port with

802.3af-compliant Power over Ethernet (PoE) support
One console port with an RJ-45 connector
Two LEDs: Power/Diag, WLAN1/WLAN2/LAN
Four embedded omni antennas
PoE 802.3af compliant

Standards

IEEE 802.11n 2.4 GHz and 5.0 GHz
IEEE 802.11a 5.0 GHz
IEEE 802.11b/g, 2.4 GHz
IEEE 802.3, IEEE 802.3u, IEEE 802.3ab
IEEE 802.3af Power over Ethernet (PoE)
IEEE 802.11h Regulatory Domain Selection
Wi-Fi Multimedia (WMM)
Wireless Distribution System (WDS)

Wireless Frequency

802.11g/n:

2.4 ~ 2.4835 GHz (US, Canada)

2.4 ~ 2.4835 GHz (ETSI, Japan)

802.11b:

2.4 ~ 2.4835 GHz (US, Canada)

2.4 ~ 2.4835 GHz (ETSI)

2.4 ~ 2.497 GHz (Japan)

802.11a/n:

5.15 ~ 5.25 GHz (lower band) US/Canada, Europe, Japan

5.25 ~ 5.35 GHz (middle band) US/Canada, Europe, Japan

5.725 ~ 5.825 GHz (upper band) US/Canada

5.50 ~ 5.70 GHz Europe

Wireless Features

VAP (Virtual Access Point) support with up to 16 SSIDs
Operation modes: AP Mode, Point-to-Point WDS, Point-to-Multiple points
WDS, WDS With AP
Transmit power adjustment
IEEE 802.11h DFS/DFS2 and automatic TPC
Traffic Control for each SSID
Band Preference for same SSID services on dual band
Dynamic Channel Selection for noisy environment
Rate Selection to disable low data rate access
Client connection preemption (n > ag > b) in case service capability is full
Auto-channel selection

Security

WEP 64/128-bits
Wi-Fi Protected Access (WPA/WPA2)
WPA/WPA2 (PSK) over WDS
Secure SSH (Secure Sockets Shell), Telnet
Secure Sockets Layer (SSL) remote management login
HTTPS
Access control list
RADIUS authentication
EAP-MD5, EAP-TLS, EAP-TTLS, PEAP, EAP-SIM, and EAP-AKA
SSID broadcast disable

Network Management

Industrial CLI (Command Line Interface)
Telent, SSH
Web-based Management (HTTP and HTTPS)
SNMP management v1/v2c/v3
Software download and upgrade by TFTP, FTP, or HTTP
Configuration file backup and restore by TFTP or FTP
System Information – AP status, station status, event logs
Dual image
SNTP
Country selection
Scheduling Rebooting
Radius Accounting
IPv4 and IPv6 dual stack support
Link Integrity to disable WiFi service while uplink is not available

Antenna

Type: PCB type
Gain: 2dBi in 2.4GHz, 3dBi in 5GHz

Regulatory Compliance

FCC Part 15 Subpart B
CE

Radio Signal Certification

FCC Part 15C 15.247, 15.207 (2.4GHz)
EN 300 328
EN 301 489-1
EN 301 489-17
NCC (Taiwan)

Mechanical

Dimensions: 14 x 14 x 4.8 cm (5.51 x 5.51 x 1.88 in.)
Weight: 1.12 lbs (0.51 kg)

Power

Input: 100 or 240 VAC, 50-60 Hz
Output:48 V/0.38 A
Power Consumption: 10.56 W maximum

Environmental Specification

Temperature:
Standard Operating: 0°C to 40°C (32°F to 104°F)
Storage: -20°C to 70°C (-4°F to 158°F)
Humidity: 15% to 95% (non-condensing)

Warranty

Please check www.smc.com for the warranty terms in your country/region.

©2013 SMC Networks. EliteConnect

TM

is a trademark of SMC Networks.
Other trademarks or registered trademarks are the property of their
respective owners. Information is subject to change without notice. All rights
reserved.

Contact

Worldwide Corporate and Sales Headquarters

No. 1 Creation Road III,

Hsinchu Science Park,

30077, Taiwan, R.O.C.

Tel: [phone] Fax: [phone]

Edge-Core Networks Corporation

Check www.smc-asia.com or www.smc.com for your local country contact information

SMC-DS-0713-01

Singapore

15 Enggor Street

#10-04, Realty Centre

Singapore 079716

Tel: [phone] Fax: [phone]