Smc 2862W-G Quick Installation Guide

After unpacking the EZ Connect™ g 2.4GHz 54 Mbps Wireless USB 2.0 Adapter, check
the contents of the box to be sure you have received the following components:

•1 SMC2862W-G EZ Connect™ g 2.4GHz 54 Mbps Wireless USB 2.0 Adapter.

•1 USB extension cable.

•1 EZ Installation Wizard and Documentation CD.

• Quick Installation Guide.

Immediately inform your dealer in the event of any incorrect, missing or damaged
parts. If possible, please retain the carton and original packing materials in case there
is a need to return the product.

Please register this product and upgrade the product warranty at SMC’s Web site:
www.smc.com or www.smc-europe.com.

To install and connect to the SMC2862W, you must have:

•A PC running Windows 98SE/Me/2000/XP.

•A CD-ROM drive.

• An available USB 2.0 port.

•A minimum of 32MB RAM and 300 MHz CPU.

•A minimum of 10MB available hard disk space for utility and driver installation

•Another IEEE 802.11b, or 802.11g compliant device installed on your network such
as the Barricade™ g 2.4GHz 54 Mbps Wireless Broadband Router with Print Server
(SMC2804WBRP-G), or another wireless adapter, such as the EZ Connect™ g 2.4GHz
54 Mbps Wireless PCI Card (SMC2802W).

SMC’s EZ Connect™ g 2.4GHz 54 Mbps Wireless USB 2.0 Adapter (SMC2862W-G) is a high
speed IEEE 802.11g-compliant wireless network adapter that supports up to 54 Mbps data
rate, and seamlessly integrates with existing Ethernet networks to support applications such
as mobile users or temporary conferences. This solution offers a high data rate and reliable
wireless connectivity with considerable cost savings over wired LANs (which include long­term maintenance overhead for cabling). Just install enough wireless access points to cover
your network area, plug wireless cards into your notebooks or computers, and start network­ing.

The EZ Connect™ g 2.4GHz 54 Mbps Wireless USB 2.0 Adapter has two status LED indicators.

EZ Connect™ wireless products offer a fast, reliable, cost-effective networking solution for:

• Remote access to corporate network information
E-mail, file transfer and terminal emulation.

• Difficult-to-wire environments
Historical or old buildings, asbestos installations and open areas where wiring
is difficult to employ.

•Frequently changing environments

Retailers, manufacturers and banks which frequently rearrange the workplace
or change locations.

• Temporary LANs for special projects or peak periods
Trade shows, exhibitions and construction sites that need a temporary setup. Retailers,
airline and shipping companies that need additional workstations for peak periods.
Auditors who require workgroups at customer sites.

•Access to databases for mobile workers

Doctors, nurses, retailers or white-collar workers who need access to databases while
being mobile in a hospital, retail store, in an office or on a campus.

•SOHO users

SOHO (Small Office and Home Office) users who need easy and quick installation of a small
computer network.

Package Contents Hardware Description

System Requirements Applications

LED

Link

Status

On

Flashing

Description

Indicates a valid connection.

Indicates the adapter is scanning for
available networks.

FOR TECHNICAL SUPPORT, CALL:
From U.S.A. and Canada
(24 hours a day, 7 days a week)

(800) SMC-4-YOU;
Phn: [phone];
Fax: [phone]

From Europe: Contact details can be found
on www.smc-europe.com or www.smc.com.

INTERNET
E-mail addresses:

[e-mail]
[e-mail]

World Wide Web:

http://www.smc.com/
http://www.smc-europe.com/

If you are looking for further contact
information, please visit www.smc.com
or www.smc-europe.com.

Model Number: SMC2862W-G

Driver updates:

http://www.smc.com/index.cfm?action=tech_support_drivers_downloads

Hardware Installation

EZ Installation CD

EZ ConnectTMg
Wireless USB 2.0. Adapter

Congratulations on your purchase of the EZ ConnectTMg 54Mbps Wireless USB 2.0 Adapter
(SMC2862W-G). This EZ Quick Installation Guide will guide you through a simple process
to get your new SMC2862W-G installed. For additional information and advanced settings
configurations please refer to the User Guide included on the CD-ROM.

1. Find an available USB slot in your destop or laptop.

2. Remove the cap and place in a save location. Slide the USB adapter
into the slot and make sure there is a firm connection.

Note: The SMC2862W-G Wireless USB 2.0 Adapter allows you to “hot swap”

the adapter any time, even when your notebook is powered on.

Note: Installation processes such as this may require the use of your

original, licensed copy of Windows. Please have your Windows
CD available BEFORE proceeding with the installation.

This Installation method makes the process as
simple and Plug-and-Play as possible. Simply
run the driver/utility program, reboot your
machine and insert your EZ Connect™ g 2.4GHz
54 Mbps Wireless USB 2.0 Adapter. It's as easy
as 1-2-3.

1. Insert the EZ Installation Wizard and
Documentation CD.

2. Click the [Install Driver/Utility] button
to continue.

3. Please wait while the driver/utility
installation wizard begins to load. Then
click the [Next] button to continue.

4. Choose your destination program folder and
click [Next].

(Note: It is recommended to leave this as the

default setting.)

5. Type the name you want to display in the
[Programs Start] Menu.

(Note: It is recommended to leave this at the

default setting.)

6. The installation wizard will now copy the necessary
program files. Please wait.

7. After the installation is complete, please click [Finish].
The PC will now restart.

8. After booting up, the SMC2862W-G driver will begin
to install. Please follow the on-screen directions until
completion. Once installed, you will be able to take full
advantage of the features of your new USB 2.0 Wireless
Adapter.

(Note: In Windows 2000 or Windows XP, you may be

prompted by a Digital Signature pop up window.
Please be sure to click [Yes] or [Continue Anyway]
to continue the driver installation.)

SMC2862W-G

Information furnished by SMC Networks, Inc. (SMC) is believed to be accurate and reliable.
However, no responsibility is assumed by SMC for its use, nor for any infringements of
patents or other rights of third parties, which may result from its use. No license is
granted by implication or otherwise under any patent or patent rights of SMC.
SMC reserves the right to change specifications at any time without notice.

Copyright© SMC Networks, Inc., 2004. All rights reserved.
SMC is a registered trademark; and EZ ConnectTMis a trademark of SMC Networks, Inc.
Other product and company names are trademarks or registered trademarks of their
respective holders.

Quick Installation Guide

WIRELESS
ADAPTER

COMPUTER