
CIP37363 | INDOOR IP-CAMERA
EN
| Instruction manual
FR | Mode d’emploi
DE | Bedienungsanleitung
NL | Gebruiksaanwijzing
PL | Instrukcja obsługi

PARTS DESCRIPTION / ONDERDELENBESCHRIJVING / DESCRIPTION DES PIÈCES /
TEILEBESCHREIBUNG / DESCRIPCIÓN DE LAS PIEZAS / DESCRIÇÃO DOS
COMPONENTES / DESCRIZIONE DELLE PARTI / BESKRIVNING AV DELAR /
OPIS CZĘŚCI / POPIS SOUČÁSTÍ / POPIS SÚČASTÍ / PARÇALARIN AÇIKLAMASI
6
3
2
4
1 7 5

Instruction manual
PARTS DESCRIPTION
1. LED
2. Microphone
3. Lens
4. Speaker
5. USB port
6. Reset button
7. MicroSD card slot
INSTALLATION
• If you wish to mount the camera on a wall, attach the mount to
the wall with the supplied screws and plugs. Make sure they are
suitable for your type of wall.
BEFORE THE FIRST USE
Follow the instructions below to quickly get started with your camera.
For a more instructions and info please visit our website,
www.smartwares.eu. Please search for "CIP-37363".
Inserting a MicroSD card
• First make sure your camera is not connected to the power
adapter. Insert your Micro-SD card all the way in the MicroSD
card slot on the camera. Only use a class 10 MicroSD card (max
128 GB).
• A MicroSD card is required for recording footage.
Download the app
• iOS: Search for "SW360" in the Apple app store.
• Android: Search for "SW360" in the Google play store.
• Download and install the app on your mobile device.
Creating an account
If you're using this app for the first time, you will need to create an
account.
• Open the app.
• Tap on "Register Account"
• Fill in your email address.
• Enter a new password, and confirm it.
Note: It's not possible to paste the code, you need to type it.
• A verification email will be sent to you. Please click on the link in
the mail to confirm your account. If you don't confirm, you won't
be able to continue using your account.
• Now open the app again and login to the account you just
created.
• If you already have created an account, fill in your login and
password information, and tap on "Sign in".
• If you have forgotten your password, tap on "Forgot password",
and follow the directions in the app.
CONNECTING A CAMERA
Make sure your mobile device is connnected to the Wi-Fi network you
ultimately want to connect your camera to.
1. On the "my devices" tab, tap on the "plus" (+) sign in the top right
corner. Tap "Add a new device".
2.Tap on the picture that corresponds to your camera.
3. Plug in the camera with the USB adapter to power it up. Please
wait for 30 seconds until the LED on the camera starts flashing. Make
sure that your camera is in close range (1m) of your mobile device.
EN
3

Instruction manual
4.Check if the notification LED is flashing, and confirm in the app. If
the LED is not flashing, please refer to the chapter "Resetting the
camera".
iOS Android
5a. Exit the app, and go to the Wi-
Fi settings on your mobile device.
The camera transmits it's own
private wireless network.
5b. Connect to the Wi-Fi network
SSID that corresponds to your
Camera-ID. You can find the
camera-ID on the sticker on the
back of the camera. The
password is “11111111”. Wait for
your mobile device to connect to
the camera's Wi-Fi network.
5c. When you have connected
successfully to the camera, return
to the SW360 app.
6. In the SW360 app, choose the SSID of the wireless network you
ultimately want to connect the camera to. Enter the corresponding
password. Note: A 5Ghz WiFi network is not supported.
7. When the connection is successful, the LED will turn green and the
camera will say "Connection is successful".
8. Please give your camera a name (for instance "living room"). Now
you will be able to access your camera. You can watch the live view
from anywhere in the world through the app on your mobile device.
5. Select your camera-ID from the
list. You can find the camera-ID
on the sticker on the back of the
camera.
APP FUNCTIONS
• On the "My devices" tab, you can see and manage all the
camera's that are linked to your account. If you tap the three dots
next to your camera name, you have the following options:
Setup
• From the setup screen you can change:
– The name of your camera.
– Video quality.
– Motion detection notifications.
– Recording options.
– Formatting your MicroSD card.
– Access the "Help" function.
• You can share your cameras with other accounts by tapping on
the share icon.
• You can remove a camera from your account by tapping "delete".
Live view
• On the "my devices" tab, press the play button to open the live
view of your camera.
• Rotate your mobile device to view the video full-screen in
landscape.
• Tap or pinch to zoom in and out.
• Rotate the view by scrolling with your finger.
• From this screen, you can use the buttons on the bottom to:
– Turn the sound on or off.
– Take a snapshot.
– Talk through the camera by tapping and holding the
microphone icon.
– Record footage directly to your mobile device.
4

• It's possible to view recorded footage by sliding the timebar at the
bottom, or choosing a date.
Troubleshooting
• I can't see my camera-ID in the list during setup.
– Please make sure you camera is within 1m of your mobile
device.
– Try to reset the camera. See paragraph "resetting the
camera".
– Attempt to enable the location service on your mobile device
and try again.
– Go to the Wi-Fi settings of your mobile device, and check if
you see the camera-ID in your list of available networks.
Connect to this network. Now go back to the SW360 app,
and check if you can link the camera to your Wi-Fi network.
Resetting the camera
• When do you need to reset the Camera?
– If you have changed your Wi-Fi name or password.
– If you have changed the Wi-Fi router or access point.
– If you want to link the camera to another account.
– If you want to link the camera to a different Wi-Fi network.
• To reset the camera, poke the reset button on the camera with
the provided tool. Keep the button pressed for at least 10
seconds. Release the button, the camera will tell you the factory
settings are restored. Wait for at least 20 seconds to allow the
camera to reboot.
Instruction manual
EN
5

Manuel d'instructions
DESCRIPTION DES PIÈCES
1. LED
2. Micro
3. Objectif
4. Haut-parleur
5. Port USB
6. Bouton de réinitialisation
7. Logement de carte MicroSD
INSTALLATION
• Si vous voulez monter la caméra au mur, fixez le support au mur
avec les vis et chevilles fournies. Assurez-vous de leur adaptation
au type de mur.
AVANT LA PREMIÈRE UTILISATION
Suivez ces instructions pour prendre rapidement en main votre
caméra. Pour plus d'instructions et d'informations, veuillez visiter
notre site Web, www.smartwares.eu. Recherchez "CIP-37363".
Insertion de carte MicroSD
• Assurez-vous d'abord que votre caméra n'est pas connectée à
l'adaptateur d'alimentation. Insérez votre carte MicroSD à fond
dans le logement de carte MicroSD de la caméra. Utilisez
uniquement une carte MicroSD de classe 10 (maxi. 128 Go).
• Une carte MicroSD est obligatoire pour enregistrer une vidéo.
Téléchargement d'app
• iOS : Recherchez "SW360" sur l'Apple app store.
• Android : Recherchez "SW360" sur Google play store.
• Téléchargez et installez l'app sur votre téléphone portable.
Création de compte
Si vous utilisez cette app pour la première fois, vous devez créer un
compte.
• Ouvrez l'app.
• Touchez "Register Account".
• Renseignez votre adresse e-mail.
• Saisissez un nouveau mot de passe et confirmez-le.
Remarque: Il est impossible de coller le code. Vous devez le saisir.
• Un e-mail de vérification vous est envoyé. Cliquez sur le lien dans
le courrier afin de confirmer votre compte. Si vous ne confirmez
pas, vous ne pouvez pas continuer à utiliser votre compte.
• Ouvrez alors à nouveau l'app et connectez-vous au compte que
vous venez de créer.
• Si vous avez déjà créé un compte, saisissez votre identifiant et
votre mot de passe et touchez "Sign in".
• Si vous avez oublié votre mot de passe, touchez "Forgot
password" et suivez les instructions de l'app.
CONNEXION D'UNE CAMÉRA
Assurez-vous que votre appareil mobile est connecté au réseau Wi-Fi
auquel vous souhaitez connecter votre caméra.
1. Dans l'onglet "mes dispositifs", touchez le signe "plus" (+) en haut à
droite. Touchez "Ajouter nouveau dispositif".
2.Touchez l'image qui correspond à votre caméra.
3. Branchez la caméra avec l'adaptateur USB pour la mettre sous
tension. Attendez 30 secondes pour que la LED de la caméra
commence à clignoter. Assurez-vous que la caméra est à portée (1
m) de votre dispositif mobile.
6