
FSE-400
Model S400-1 SMART Electric Height-Adjustable Mobile Stand
M2.5 M3 M4 M5
A (×16) B (×8) C (×4)
(×4)
D (×2) E (×2)
(×4)
M8 (×4)
M6 (×4)
(×2)
1 2
A (×8)
τ
10 Nm (88 in-lb)
8×
A
X
42 kg – 91 kg
(92.4 lbs – 200 lbs)
A
4×
B
B
1032677 Rev 02

11
2×
A B
A B
D (×2) E (×2)
C
τ
11 – 20 Nm
(97 – 177 in-lb)
4×
12 13
4 1032677 Rev 02

14
15
A
10 mm
(3/8")
5 sec
B
SMART Electric Height-Adjustable
Mobile Stand
Installation and maintenance guide
smarttech.com/kb/171362
Was this document helpful? smarttech.com/docfeedback/171362
FCC
Suppliers Declaration of Conformity 47 CFR § 2.1077 Compliance Information • Unique Identifier: FSE-400
Responsible Party – U.S. Contact Information: SMART Technologies Inc. 1505 Westlake Ave N, Suite 700, Seattle, WA 98109 • compliance@smarttech.com
FCC Compliance statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired operation.
This device complies with ICES-003 of the ISED rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Warning: Operation of this equipment in a residential environment could cause radio interference.
Hardware environmental compliance
SMART Technologies supports global efforts to ensure that electronic equipment is manufactured, sold and disposed of in a safe and
environmentally friendly manner.
Innovation, Science and Economic Development Canada (ISED)
Cet appareil est conforme à la norme ISED NBM-003 pour les appareils radio agréés.
Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de
provoquer un fonctionnement indésirable.
Waste Electrical and Electronic Equipment (WEEE)
Electrical and electronic equipment contain substances that can be harmful to the environment and to human health. The crossed-out
wheeled bin symbol indicates that products should be disposed of in the appropriate recycling stream and not as regular waste.
See smarttech.com/compliance for more information.
support.smarttech.com/support
support.smarttech.com/contact-support
© 2019 SMART Technologies ULC. All rights reserved. SMART Board, smarttech, the SMART logo and all SMART taglines are trademarks or registered
trademarks of SMART Technologies ULC in the U.S. and/or other countries. All third-party products and company names may be trademarks of their
respective owners. Contents are subject to change without notice. This product and/or use thereof covered by one or more of the following U.S. patents;
smarttech.com/patents. Other patents pending. 04/2019.
smarttech.com/kb/171362
1032677 Rev 02
*1032677*