Smart Technologies 600i6 User Manual
SMARTBoard® 600i6
Interactive whiteboard system
Configuration and user’s guide
FCC warning
This equipment has been tested and foundto comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designedto provide
reasonable protection against harm ful interference when the equipment is operated i n a commercial environment. This equipment generates, uses and can radiate radio
frequency energy and, if not installed andused in accordance w ith the m anufactur er’s instructions, may cause harmful i nter ference tor adio communications. Operation of
this equipm ent in ar esidential area is li kely to cause harmful interferencei n w hich case the user will be requir ed to corr ect the interference at his own expense.
Trademark notice
SMARTBoard, SMARTNotebook, sm arttech, the SMART logo andall SMART taglines are trademarks or registered trademarks of SMARTTechnologiesULC in the U.S.
and/or other countries. TexasInstruments, BrilliantColor, DLP and DLPLink are trademarks of TexasInstruments. M icrosoft, Windows andInternetExplorer are either
registered trademarks or trademarks of Mi crosoft Corporation in the U.S. and/or other countries. Blu-ray is atr ademark of the Blu-ray Disc Association. All other third-party
product and company names may be trademarks of their respective owners.
Copyright notice
© 2013SMARTTechnologiesULC. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system or translated
into any language in any form by any means w ithout the pri or writtenconsent of SMARTTechnologiesULC. Information in this manual is subject to change without notice
and does not r epresent a commitment on the part of SM ART.
Oneor more of the following patents: US6320597; US6326954; US6540366; US6741267; US7151533; US7687736; US7757001; USD612396; U SD616462; USD617332; and
USD636784. Other patents pending.
09/2013
smarttech.com/kb/170585
Important information
Before you install and use your SMARTBoard®600i6 interactive whiteboard system, read and
understand the safety warnings and precautions in this user’s guide and the included warnings
document. These safety warnings and precautions describe the safe and correct operation of your
interactive whiteboard system and its accessories, helping you to prevent injuries and equipment
damage. Ensure that your interactive whiteboard system is always being used correctly.
In this document, “interactive whiteboard system” refers to the following:
l SMARTBoard 600 series interactive whiteboard
l SMARTUF70 or SMARTUF70w projector
l Accessories and optional equipment
The projector included with your system is designed to work only with certain SMARTBoard
interactive whiteboard models. Contact your authorized SMART reseller (smarttech.com/where) for
more information.
Safety warnings, cautions and important information
Installation
W A R N I N G
l Failure to follow the installation instructions shipped with your SMART product could result in
personal injury and damage to the product.
l To reduce the risk of fire or electric shock, do not expose the SMART product to rain or
moisture.
i smarttech.com/kb/170585
I M P O R T A N T I N F O R M A T I O N
l Two people are required to mount your SMART product because it may be too heavy for one
person to safely maneuver.
When you lift your interactive whiteboard, you and your assistant should stand on either side
of the screen, supporting its weight at the bottom while balancing the top with your other
hands.
l When mounting the projector boom on a framed or hollow wall, attach the mounting bracket to
a stud to safely support the projector’s weight. If you use only drywall anchors, the drywall can
fail, resulting in possible personal injury, and damage to the product which may not be covered
by your warranty.
l Do not leave cables on the floor where they can be a tripping hazard. If you must run a cable
over the floor, lay it in a flat, straight line and secure it to the floor with tape or a cable
management strip of a contrasting color. Handle cables carefully and avoid excessive
bending.
C A U T I O N
l Do not operate this unit immediately after moving it from a cold location to a warm location.
When the unit is exposed to such a change in temperature, moisture can condense on the lens
and crucial internal parts. Allow the system to stabilize to room temperature before operation
to prevent possible damage to the unit.
l Do not place the unit in hot locations, such as near heating equipment. Doing so could cause a
malfunction and shorten the life of the projector.
l Avoid setting up and using the SMART product in an area with excessive levels of dust,
humidity and smoke.
l Do not place your SMART product in direct sunlight or near any appliance that generates a
strong magnetic field.
l If you need to lean the interactive whiteboard against a wall before you mount it, make sure it
remains in an upright position, resting on the pen tray brackets, which can sustain the weight
of the interactive whiteboard.
Do not rest the interactive whiteboard on its side or on the top of the frame.
ii smarttech.com/kb/170585
I M P O R T A N T I N F O R M A T I O N
l You must connect the USB cable that came with your SMARTBoard interactive whiteboard to
a computer that has a USB compliant interface and that bears the USB logo. In addition, the
USB source computer must be compliant with CSA/UL/EN 60950 and bear the CE mark and
CSA and/or UL Mark(s) for CSA/UL 60950. This is for operating safety and to avoid damage to
the SMARTBoard interactive whiteboard.
I M P O R T A N T
l The SMARTBoard 680i6 and 685i6 interactive whiteboard system textless installation guide
is also available online (smarttech.com/kb/170498).
l Make sure an electrical socket is near your SMART product and remains easily accessible
during use.
l Using your SMART product near a TV or radio could cause interference to the images or
sound. If this happens, move the TV or radio away from the projector.
Operation
W A R N I N G
l If you are using an external audio system, use only the power supply included with that
product. Using the wrong power supply might create a safety hazard or damage the
equipment. If in doubt, refer to the specification sheet for your product to verify the power
supply type.
l Do not climb (or allow children to climb) on a wall- or stand-mounted SMARTBoard interactive
whiteboard.
Do not climb on, hang from or suspend objects from the projector boom.
Climbing on the interactive whiteboard or projector boom could result in personal injury
or product damage.
C A U T I O N
l Do not block the projector’s ventilation slots and openings.
l If dust or small items prevent pen tray buttons from being pressed or cause constant button
contact, remove the obstructions carefully.
iii smarttech.com/kb/170585
I M P O R T A N T I N F O R M A T I O N
I M P O R T A N T
l Keep your remote control in a safe place because there is no other way to access menu
options.
l Do not disconnect cables from the ECP to connect peripheral devices because you could
disconnect controls for your interactive whiteboard.
l Disconnect the product from its power source when it’s not used for a long period.
Other precautions
If you own a SMARTproduct other than a SMARTBoard 680i6 and 685i6 series interactive
whiteboard system, refer to the installation manual for your product for relevant warnings and
maintenance instructions.
Environmental requirements
Before you install your SMARTBoard600 interactive whiteboard system, review the following
environmental requirements.
Environmental
requirement
Operating temperature
Storage temperature
Humidity
Water and fluid
resistance
Dust
Electrostatic discharge
(ESD)
Parameter
41°F to 95°F (5°C to 35°C) from 0' to 6000' (0 m to 1800 m)
l
41°F to 86°F (5°C to 30°C) from 6000' to 9800' (1800 m to 3000 m)
l
Humidity above 80% could cause slight wrinkling in the screen
l
surface sheet. The wrinkles disappear when the humidity lowers.
Intended for indoor use only. Doesn’t meet any salt-spray or water
l
ingress requirements.
Don’t pour or spray liquids directly onto your interactive whiteboard,
l
the projector or any of its sub-components.
Intended for use in office and classroom environments. Not for
l
industrial use where heavy dust and pollutants can cause
malfunctions or impaired operation. Periodic cleaning is required in
areas with heavier dust. See Cleaning the projector on page 35 for
information on cleaning the projector.
EN61000-4-2 severity level 4 for direct and indirect ESD
l
No malfunction or damage up to 8kV (both polarities) with a 330ohm,
l
150 pF probe (air discharge)
Unmated connectors meet no malfunction or damage up to 4kV (both
l
polarities) for direct (contact) discharge
iv smar ttech.com/kb/170585
I M P O R T A N T I N F O R M A T I O N
Environmental
requirement
Cables
Conducted and radiated
emissions
Parameter
All SMARTBoard600i6 interactive whiteboard system cables should
l
be shielded to prevent potential accidents and degraded video and
audio quality.
EN55022/CISPR 22, Class A
l
v smar ttech.com/kb/170585
Contents
Important information i
Safety warnings, cautions and important information i
Environmental requirements iv
Chapter 1: About your interactive whiteboard system 1
SMARTBoard600i6 interactive whiteboard system features 2
Included accessories 4
Chapter 2: Installing your interactive whiteboard system 7
Choosing a location 8
Choosing a height 8
Securing your interactive whiteboard system 8
Routing the cables 9
Installing SMART software 10
Changing your projector’s aspect ratio for use with your SMARTBoard 690 interactive
whiteboard 10
Chapter 3: Using your interactive whiteboard system 11
Using your projector 11
Using your interactive whiteboard 23
Using the Extended Control Panel (ECP) 23
Appendix 4: Integrating other devices 27
Video format compatibility 27
Connecting peripheral sources and outputs 33
Chapter 5: Maintaining your interactive whiteboard system 35
Maintaining your interactive whiteboard 35
Cleaning the projector 35
Focusing and adjusting the projector image 36
Replacing the projector lamp 37
Chapter 6: Troubleshooting your interactive whiteboard system 43
Before you start 44
Determining your interactive whiteboard system’s status 45
Resolving interactive whiteboard issues 47
Resolving projector issues 48
Resolving ECP issues 53
Accessing the service menu 54
vii smarttech.com/kb/170585
C O N T E N T S
Transporting your interactive whiteboard system 55
Appendix A: Remotely managing your system through a network interface 57
Web page management 57
Simple Network Management Protocol (SNMP) 65
Appendix B: Remotely managing your system through an RS-232 serial interface 67
Connecting your room control system to the SMART UF70 projector 68
Projector programming commands 70
Appendix C: Disabling user USB access 97
Appendix D: Remote control code definitions 101
Appendix E: Hardware environmental compliance 103
Waste Electrical and Electronic Equipment and Battery regulations (WEEE and Battery
Directives) 103
Batteries 103
Mercury 103
More information 103
Index 105
viii smarttech.com/kb/170585
Chapter 1
whiteboard system
SMARTBoard600i6 interactive whiteboard system features 2
SMARTBoard 600 series interactive whiteboard 2
SMARTUF70 or SMARTUF70w projector 3
Extended Control Panel (ECP) 4
Included accessories 4
Remote control 4
Pens 4
Eraser 5
VGA connection kit 5
Your SMARTBoard600i6 interactive whiteboard system combines the following components:
l SMARTBoard 600 series interactive whiteboard
l Wall-mounted, short-throw SMARTUF70 or SMARTUF70w projector
l Accessories and optional equipment
This chapter describes the features of your interactive whiteboard and provides information about
product parts and accessories.
1 smarttech.com/kb/170585
C H A P T E R 1
About your interactive whiteboard system
SMARTBoard600i6 interactive whiteboard
system features
Your SMARTBoard600i6 interactive whiteboard
system uses the short-throw, high-offset
SMARTUF70 or SMARTUF70w projector. The throw
distance of the SMARTUF70 or SMARTUF70w
projectors is half that of the SMARTUF65 projector,
resulting in a shorter boom and reduced shadows on
the projected image.
When the projector displays an image from your
computer on the touch-sensitive interactive
whiteboard, you can do everything that you can do at
your computer—open and close applications, scroll
through files, conference with others, create new
documents or edit existing ones, visit websites, play
video clips and more—by touching the screen. This
projector also supports video and audio connections
from a variety of devices, including DVD/Blu-ray™ players, VCRs, document cameras and digital
cameras, and can project media from these sources onto the interactive screen.
When you use SMART software with your SMARTBoard600i6 interactive whiteboard system, you
can write or draw over the projected computer image in digital ink using a pen tray pen or your finger,
and then save these notes to a .notebook file or directly into any Ink Aware application.
SMARTBoard 600 series interactive whiteboard
Your SMARTBoard 600 series interactive whiteboard has many features, including a resistive touch
screen and a pen tray.
Other features of your interactive whiteboard include the following:
l A pen tray that automatically detects when you pick up a pen
tray pen or the eraser
l Pen tray buttons that activate the on-screen keyboard,
right-click, Orientation and Help functions
l A durable tear-resistant surface optimized for projection and
easily cleaned with whiteboard cleaner
l A security cable lock feature that enables you to lock your
interactive whiteboard to help safeguard it from theft
2 smarttech.com/kb/170585
C H A P T E R 1
About your interactive whiteboard system
For more information about your SMARTBoard interactive whiteboard, see the SMARTBoard 600
and D600 series interactive whiteboard installation and user’s guide (smarttech.com/kb/001414).
SMARTUF70 or SMARTUF70w projector
The SMARTUF70 or SMARTUF70w projector system includes a
short-throw projector for use with SMARTBoard interactive
whiteboards and a sturdy support system suitable for many different
environments.
Other features of your projector system include:
l A wall-mounted, high-offset projector engine that uses DLP® technology by
TexasInstruments™, providing BrilliantColor™ performance and Gamma 2.2 correction with
SMART Presentation, Bright Room, Dark Room, sRGB and User modes
l PAL, PAL-N, PAL-M, SECAM, NTSC, and NTSC 4.43 video system compatibility
l HDMI, Composite,and VESA® RGB video inputs (not included).
l WXGA, QVGA, VGA, SVGA, XGA, SXGA, SXGA+ and UXGA video format compatibility
l Native 1024 × 768 resolution (SMARTUF70 projector)
OR
Native 1280 × 720 resolution (SMARTUF70w projector in 16:9 aspect ratio mode)
l Remote management via a serial RS-232 interface, web page or SNMP
l An alert broadcast feature that enables administrators to send notification messages to network-
connected projector systems for immediate on-screen display
l Protected cable routing through a cable cover that limits tampering and clutter
l A secure mounting and installation system that includes the following:
o
An optional projector padlock ring to prevent removal of the projector from the boom
o
Accessory mounting hardware for solid masonry or framed wall installations kit part number
1007416
o
Templates and instructions for positioning the system safely
Projector information
3 smarttech.com/kb/170585
C H A P T E R 1
About your interactive whiteboard system
Extended Control Panel (ECP)
Your projector system’s ECP attaches to the bottom frame
of your interactive whiteboard. The ECP features controls
for power, source selection and volume adjustment, as well
as an integrated USB hub that enables you to switch
seamlessly between two connected computers.
Connection receptacles for your source inputs include:
l One USB A receptacle on the front of the ECP for USB drives
l Two USB A receptacles behind the interactive whiteboard
l Two RCA jacks on the front of the ECP for dual-channel audio input
l One RCA jack on the front of the ECP for composite video input
l One captive USB B receptacle for your primary computer
l One DB15M receptacle behind the interactive whiteboard for connecting to the projector
l One USB B receptacle behind the interactive whiteboard for connecting a secondary computer
Included accessories
The following accessories are included with your interactive whiteboard system.
Remote control
The remote control enables you to control the system and set up your projector. Use the
remote control to access menu options, system information and input selection options.
Pens
The pens have rubberized grip areas and are colored to match four colors of
digital ink: black, red, green and blue.
You can use dry-erase markers to replace the included pens, as long as
they’re a similar shape, don’t scratch or mark your interactive whiteboard
surface and reflect infrared light. If the substitute doesn’t reflect infrared
light, the pen tray sensors might not detect the presence of the pen.
4 smarttech.com/kb/170585
C H A P T E R 1
About your interactive whiteboard system
N O T E
Some of SMART’s older pens aren’t designed to reflect infrared light and the pen tray sensors might
not detect them reliably.
T I P
Wrap light-colored tape around a substitute pen to improve the reflection of infrared light and help
with tool detection.
Eraser
The eraser resembles a rectangular chalkboard eraser. You can use a
substitute object, as long as it has a similar shape, reflects infrared light and
doesn’t scratch or mark the interactive whiteboard surface.
VGA connection kit
The VGA connection kit allows you to connect a laptop to your interactive
whiteboard system using a VGA cable. The end of the VGA connection kit
can be attached to either side of the interactive whiteboard or to a wall in a
convenient location.
You can add a variety of accessories to your interactive whiteboard to best
meet your specific needs. Purchase these items from your authorized
SMART reseller.
For more information on accessories, go to smarttech.com/accessories.
5 smarttech.com/kb/170585
Chapter 2
whiteboard system
Choosing a location 8
Choosing a height 8
Securing your interactive whiteboard system 8
Locking the pen tray to your interactive whiteboard 8
Securing the projector to the boom 8
Routing the cables 9
Installing SMART software 10
Changing your projector’s aspect ratio for use with your SMARTBoard 690 interactive whiteboard 10
Consult the SMARTBoard600i6 interactive whiteboard system installation document included with
your product for instructions on how to install and secure your system.
I M P O R T A N T
Use the SMARTBoard 660i5,680i5, 685i5 and 690i5 interactive whiteboard system installation
guide (smarttech.com/kb/154547) to install your interactive whiteboard, projector and ECP.
This chapter provides additional considerations and details for installing your interactive whiteboard
system.
7 smarttech.com/kb/170585
C H A P T E R 2
Installing your inter active whiteboard system
Choosing a location
Choose a location for your interactive whiteboard system that’s far from bright light sources, such as
windows and strong overhead lighting. Bright light sources can cause distracting shadows on your
interactive whiteboard and can reduce the contrast of the projected image.
Select a wall with a flat, regular surface and sufficient clearance to accommodate your interactive
whiteboard system. Install the projector and your interactive whiteboard on the same flat surface. For
best presentation alignment, mount your interactive whiteboard system in a location that’s central to
your audience’s viewing direction.
For mobile or adjustable installation options, contact your authorized SMART reseller.
Choosing a height
SMART includes a mounting template with each interactive whiteboard system. If you lose this
template, contact your authorized SMART reseller. Using this template ensures that you can do the
following:
l Mount the projector at a safe height for head space clearance, while maintaining enough space
for airflow and installation access above the unit.
l Position the projector at the correct height above your interactive whiteboard to align the
projected image with the touch screen.
Dimensions on the template recommend a distance from the floor suitable for adults of average
height. You should consider the general height of your user community when you choose a location
for your interactive whiteboard.
Securing your interactive whiteboard system
This section explains how to secure the different components of your interactive whiteboard system.
Locking the pen tray to your interactive whiteboard
To learn how to lock the pen tray to your interactive whiteboard, see the SMARTBoard 600 and D600
series interactive whiteboard installation and user’s guide (smarttech.com/kb/001414).
Securing the projector to the boom
To learn how to secure the SMARTUF70 or SMARTUF70w projector to the boom, see the included
SMARTBoard 660i6,680i6, 685i6 or 690i6 interactive whiteboard system installation guide
(smarttech.com/kb/154547).
8 smarttech.com/kb/170585
C H A P T E R 2
Installing your inter active whiteboard system
Routing the cables
When connecting cables from your SMARTUF70 projector to your interactive whiteboard system,
make sure that all cables pass along the top of the interactive whiteboard wall-mounting bracket and
then down the side of the interactive whiteboard.
When connecting cables from a SMARTUF70w projector to the interactive whiteboard, make sure
that all cables pass between the two interactive whiteboard wall-mounting brackets. Space your wall-
mounting brackets 4" (10.2 cm) apart to provide full support for the weight of your interactive
whiteboard.
Cable routing for SMARTBoard 660 and 680
interactive whiteboards
I M P O R T A N T
Do not connect the power cable to a power outlet until you have connected all the cables to the
projector and ECP.
Cable routing for SMARTBoard 685 and 690
interactive whiteboards
9 smarttech.com/kb/170585
C H A P T E R 2
Installing your inter active whiteboard system
Installing SMART software
You must install SMARTsoftware, such as SMARTMeetingPro™ software or SMARTNotebook™
collaborative learning software on the computer connected to your interactive whiteboard system to
access all of its features.
Download SMARTsoftware from smarttech.com/software. These web pages list the minimum
hardware requirements for each software version. If SMART software is already installed on your
computer, take this opportunity to upgrade your software to ensure compatibility.
Changing your projector’s aspect ratio for use
with your SMARTBoard 690 interactive
whiteboard
Before you align the projected image on your SMARTBoard 690 interactive whiteboard, you must
change the native aspect ratio on your SMARTUF70w projector to 16:9. You don’t need to perform
this step with any other model of interactive whiteboard. The procedure you use to change the native
aspect ratio depends on the DDP firmware version of your projector.
To determine the DDP firmware version of your projector
1. Turn on your projector.
2. Press Menu on the remote control, and then press Right five times.
3. Record the DDP firmware version in the Firmware Version row.
To change the aspect ratio of a projector with DDP firmware version 0.0.1.7
1. Using the remote control, press the following buttons quickly to access the service menu:
Down, Up, Up, Left, Up.
2. Scroll to WXGA_720P_MODE, and then press Right to select 16:9.
3. Press Menu on the remote control.
To change the aspect ratio of a projector with DDP firmware version 0.0.2.1 or later
1. Press Menu on the remote control, and then press Right twice.
2. Scroll to Native DLP Resolution, and then press Right to select 16:9.
3. Press Menu on the remote control.
10 smarttech.com/kb/170585
Chapter 3
whiteboard system
Using your projector 11
Using your remote control 11
Replacing the remote control battery 12
Using the remote control buttons 13
Adjusting projector settings 14
Focusing the image 20
Adjusting the image 21
Projector connection diagram 21
Using your interactive whiteboard 23
Using the Extended Control Panel (ECP) 23
This chapter describes the basic operation of your interactive whiteboard system and explains how to
set up your remote control, retrieve system information, access the projector’s image adjustment
options and integrate your interactive whiteboard system with peripheral devices.
Using your projector
This section explains how to use your projector and its included remote control.
Using your remote control
The projector remote control enables you to access on-screen projector menus and change projector
settings.
11 smarttech.com/kb/170585
C H A P T E R 3
Using your interactive whiteboard system
Replacing the remote control battery
Follow this procedure to replace the remote control battery.
W A R N I N G
l Reduce the risk associated with a leaking battery in the projector’s remote control by following
these practices:
o
Use only the specified CR2025 coin-cell battery.
o
Remove the battery when the remote control is unused for an extended period.
o
Do not heat, disassemble, short or recharge the battery, or expose it to fire or high
temperatures.
o
Avoid eye and skin contact with the battery if it has a leak.
l Dispose of the exhausted battery and product components in accordance with applicable
regulations.
To replace the remote control battery
1. Hold down the side release on the leftside of the battery holder and pull the battery holder
completely out of the remote control.
2. Remove the old battery from the battery holder and replace it with a CR2025 coin-cell battery.
I M P O R T A N T
Align the battery’s positive (+) and negative (–) terminals with the correct signs on the battery
holder.
3. Insert the battery holder into the remote control.
12 smarttech.com/kb/170585
C H A P T E R 3
Using your interactive whiteboard system
Using the remote control buttons
The projector remote control enables you to access on-screen menus and change projector settings.
Use the Power button on the remote control or ECP to put the projector into Standby mode or to
turn it on. You can also use the Input button on the remote control or ECP to switch sources on the
projector.
Number Function Description
1 Input Select a video and audio input source on the
projector and the associated USB input source on
the ECP.
2 Menu Show or hide the projector menus.
3 (Left), (Right),
Change the menu selections and adjustments.
(Up) and (Down) arrows
4 Hide Freeze, hide or display the image:
Press once to freeze the image.
l
For example, you can display a question on the
screen while you check your e-mail.
Press again to hide the image, that is, to
l
display a black screen.
Press again to return to the live image.
l
5 Mode Select a display mode.
6 Mute Mute audio amplification.
7
(Power)
Turn on the projector or put it into Standby mode.
8 (Enter) Accept the selected mode or option.
9 (Volume Up) Increase audio amplification volume.
10 (Volume Down) Decrease audio amplification volume.
13 smarttech.com/kb/170585
C H A P T E R 3
Using your interactive whiteboard system
N O T E
The Mute, Volume Up and Volume Down buttons work only if there is an audio source connected
to the projector for the currently selected video input source.
Adjusting projector settings
The remote control’s Menu button enables you to access the on-screen display to adjust the projector
settings.
I M P O R T A N T
Keep your remote control in a safe place because there is no other way to access menu options.
Setting Use Notes
Image Adjustment menu
Display Mode Indicates the projector’s display
output (SMARTPresentation,
BrightRoom, DarkRoom,
sRGB and User).
Brightness Adjusts projector brightness
from 0 to 100.
Contrast Adjusts the difference between
the lightest and darkest parts
of the image from 0 to 100.
Frequency Adjusts the display data
frequency of the projected
image from -5 to 5 to match the
frequency of your computer’s
graphics card.
Tracking Synchronizes your projector’s
display timing with your
computer’s graphics card from 0
to 63.
H-Position Moves the horizontal position of
the source video left or right
from 0 to 100 (relative to the
projected image).
The default is SMARTPresentation.
The default is 50.
The default is 50.
The default is 0.
This setting applies to VGA inputs only.
This setting applies to VGA inputs only.
Don’t adjust this setting unless you’re advised
to by SMARTSupport.
Apply this setting only after you make all boom
adjustments.
This setting applies to VGA inputs only and is
useful in situations where the source video is
cut off.
14 smarttech.com/kb/170585
C H A P T E R 3
Using your interactive whiteboard system
Setting Use Notes
V-Position Moves the vertical position of
the source video up or down
from -5 to 5 (relative to the
projected image).
White Peaking Adjusts the image color
brightness from 0 to 10 while
providing more vibrant white
shades.
Degamma Adjusts the color performance
of the display from 1 to 3.
Color Adjusts the Red, Green, Blue,
Cyan, Magenta and Yellow
colors on the projector from 0 to
100 to provide custom color and
luminance output.
Audio menu
Volume
Don’t adjust this setting unless you’re advised
to by SMARTSupport.
Apply this setting only after you make all boom
adjustments.
This setting applies to VGA inputs only and is
useful in situations where the source video is
cut off.
A value closer to 0 creates a natural image and
a value closer to 10 enhances brightness. The
default is 10.
The default is 2.
Each color has a default value of 100.
Adjustments to the color settings register
under the User mode.
Mute Mutes the projector’s audio
output.
Disable Volume
Control
Disables the projector’s volume
control and the ECP’s volume
control knob.
Line out
Enables/disables the line out.
Microphone Enables/disables the
microphone
Speaker Enables/disables the speaker
The default is off.
If you mute the projector’s audio output and
then increase or decrease the volume, the
volume is restored automatically. You can
prevent this from happening by disabling the
volume control.
15 smarttech.com/kb/170585
C H A P T E R 3
Using your interactive whiteboard system
Setting Use Notes
Projector Functions menu
Auto Signal
Detect
Enables or disables signal
searching of input connectors.
Lamp Reminder Turns the lamp replacement
reminder on or off.
Lamp Mode Adjusts lamp brightness to
Standard or Economy.
Auto Power Off
(minutes)
Sets the length of the auto
power-off countdown timer
between 1 and 240 minutes.
Zoom Adjusts the zoom to the center
of the image in or out from 0 to
30.
The default is off.
Select On to have the projector continuously
switch inputs until it finds an active video
source.
Select Off to maintain signal detection in one
input.
This reminder appears 100 hours before the
recommended lamp replacement.
Standard displays a high-quality, bright
image.
Economy increases the lamp life by
decreasing the brightness of the image.
The default is 120 minutes.
The timer begins to count down when the
projector no longer receives a video signal.
The timer finishes when the projector enters
Standby mode.
Select 0 to turn off the timer.
The default is 0.
Zooming in cuts off the outer edges of the
source video.
Keystone Adjustment to the size of the
top and bottom edge
USB 1 source Enables touch for the selected
video source VGA out,USB 2
will disabled by associating the
video source with the room
computer USB receptacle
(USB1) on the ECP.
USB 2 source Enables touch for the selected
video source HDMI, USB 1 will
be disabled by associating the
video source with the guest
computer USB receptacle
(USB2) on the ECP.
16 smarttech.com/kb/170585
Ensure that the top and bottom edges of the
image are horizontal before you position the
left and right edges of the image relative to
your interactive whiteboard.
The default is VGA out. When the user
switches to the video source the interactive
whiteboard recognizes touch from the device
connected to the room computer USB
receptacle on the ECP. Selecting Disabled
disables the room computer USB receptacle
on the ECP.
The default is HDMI. When the user switches
to the video source the interactive whiteboard
recognizes touch from the device connected to
the guest computer USB receptacle on the
ECP. Selecting Disabled disables the room
computer USB receptacle on the ECP.
C H A P T E R 3
Using your interactive whiteboard system
Setting Use Notes
Projector ID Displays the projector’s unique
ID number (from 0 to 99) within
your organization’s network.
Aspect Ratio Adjusts the image output to
FillScreen, MatchInput or
16:9.
Startup Screen Selects the type of startup
screen (SMART, Capture
User Startup Screen, Preview
Startup Screen), or Image
Alignment Screen.
You can refer to or change this number when
using the network remote management feature
(see Remotely managing your system through
a network interface on page 57).
The default is FillScreen.
FillScreen produces an image that fills the
entire screen by stretching and scaling the
source video to match the projector’s native
resolution and aspect ratio.
MatchInput displays the source video in its
native resolution and aspect ratio. As a result,
unused space could appear along the top and
bottom edges of the screen (letterbox format)
or along the left and right edges of the screen
(pillarbox format).
See Video format compatibility on page 27 for
descriptions of each mode.
This screen displays when the projector lamp
is starting and a video source signal isn’t
displayed.
SMART displays the default SMART logo on a
blue background.
Capture User Startup Screen closes the onscreen display menu and captures the entire
projected image. The captured image is
displayed the next time the on-screen display
opens. (The capture can take up to one
minute, depending on the complexity of the
background graphic.)
Preview Startup Screen enables you to
preview the default or captured startup screen.
Image Alignment Screen enables you to
adjust the projected image size, shape and
location.
Image Alignment
Screen
Enables you to adjust the
projected image size, shape
and location.
17 smarttech.com/kb/170585
The image alignment screen appears the first
time you start your projector. However, you
can access it from the startup screen menu
any time. Press MENUor ENTER to close it.
C H A P T E R 3
Using your interactive whiteboard system
Setting Use Notes
Network menu
Network and
VGAOut
Activates the projector’s RJ45
connector and network
features.
Status Displays the current network
status (Connected,
Disconnected or Off).
DHCP Displays the status of the
network’s Dynamic Host
Configuration Protocol (DHCP)
as On or Off.
Password
Reminder
E-mails the network password
to the predefined e-mail
recipient.
IP Address Displays the projector’s current
IP address in values between
0.0.0.0 and 255.255.255.255.
The default is off.
The default is on.
On enables a DHCP server on the network to
automatically assign an IP address to the
projector.
Off enables an administrator to assign an IP
address manually.
See Web page management on page 57 to set
up a destination e-mail address.
To change the projector’s IP address, use the
RS-232 connector (see Command/response
definitions on page 81) or use a DHCP server
to assign a dynamic IP address, and then set a
static IP address using the network remote
management feature (see Remotely managing
your system through a network interface on
page 57).
Subnet Mask Displays the projector’s subnet
mask number in values
between 0.0.0.0 and
255.255.255.255.
Gateway Displays the projector’s default
network gateway in values
between 0.0.0.0 and
255.255.255.255.
DNS Displays the projector’s primary
domain name server (DNS) IP
address in values between
0.0.0.0 and 255.255.255.255.
MAC Address Displays the projector’s MAC
address in xx-xx-xx-xx-xx-xx
format.
18 smarttech.com/kb/170585
C H A P T E R 3
Using your interactive whiteboard system
Setting Use Notes
Group Name Displays the projector’s
workgroup name as set by an
administrator (maximum 12
characters).
Projector Name Displays the projector’s name
as set by an administrator
(maximum 12 characters).
Location Displays the projector’s location
as set by an administrator
(maximum 16 characters).
Contact Displays the contact name or
number for projector support as
set by an administrator
(maximum 16 characters).
You can set the projector’s workgroup name
using the remote management features (see
Remotely managing your system through a
network interface on page 57 and Remotely
managing your system through an RS-232
serial interface on page 67).
You can set the projector’s name using the
remote management features (see Remotely
managing your system through a network
interface on page 57 and Remotely managing
your system through an RS-232 serial
interface on page 67).
You can set the projector’s location using the
remote management features (see Remotely
managing your system through a network
interface on page 57 and Remotely managing
your system through an RS-232 serial
interface on page 67).
You can set the contact name or number using
the remote management features (see
Remotely managing your system through a
network interface on page 57 and Remotely
managing your system through an RS-232
serial interface on page 67).
Language menu
Language Selects language preference. Projector menu support is available in English
(default), Chinese (Simplified), Chinese
(Traditional), Czech, Danish, Dutch, Finnish,
French, German, Greek, Italian, Japanese,
Korean, Norwegian, Polish, Portuguese
(Brazil), Portuguese (Portugal), Russian,
Spanish and Swedish.
Information menu
Lamp Hours Displays the current number of
lamp usage hours from 0 to
4000 hours from when it was
last reset.
Always reset the lamp hours after you replace
a lamp, because lamp service reminders are
based on the current hours of use. See
Resetting the lamp hours on page 40 for
details on the lamp hours reset procedure.
Input Displays the currently displayed
video input source (VGA-1,
VGA-2, HDMI or None).
19 smarttech.com/kb/170585
C H A P T E R 3
Using your interactive whiteboard system
Setting Use Notes
Resolution Displays the projector’s most
recently detected video source
signal resolution and refresh
rate.
Firmware
Version
Displays the projector’s digital
display processor (DDP)
firmware version in x.x.x.x
format.
MPU Version Displays the projector
microprocessor unit (MPU)
firmware version in x.x.x.x
format.
Network Version Displays the projector’s
network communications
processor firmware version in
x.x.x.x format.
Model Number Displays the projector’s model
number.
Serial Number Displays the projector’s serial
number.
If there is no current video input source signal,
this setting displays the last known source
signal image resolution and refresh rate.
If you haven’t enabled the Network and VGA
Out setting, this setting is unable to display
the projector’s network communications
processor firmware version and displays
0.0.0.0 instead.
Focusing the image
Use the focus lever located on the projector lens to focus the projected image.
To focus the image
Rotate the focus ring clockwise or counter clockwise until the image is in focus.
20 smarttech.com/kb/170585
Loading...