SmartRG SE80AC User Manual

SE80

Quick Start Guide

Details

To minimize unwanted AC line noise that may degrade the performance of your SE80, take
advantage of the filtered outlet on the unit for powering your AC devices - especially USB
and other cell phone chargers, dimmer-capable lamps, plasma TVs and other devices
employing switching power supplies. Plug a power strip into the SE80 for additional filtered
capacity.

The bottom of the unit has a reset button and a gigabit Ethernet port.

Installing your SE80ac

Connect one end of an Ethernet cable into the Ethernet port
of the SE80ac and the other end to a LAN port on a SmartOS
router.

Plug the SE80ac into a nearby electrical outlet.

The LED flashes red. Wait for the LED to flash white. This pro­cess may take about 2 minutes.

Once the LEDstays white, you can unplug the SE80ac and move
it to the location where you want it.

The LEDs repeat the colors and flashing. When the light glows
solid white again, connection is accomplished and you can log
into your network.

3