Sloan 111-1.1-DFSM-DFB User Manual

►► Code NumberCode Number

3780052

►► DescriptionDescription

Exposed, battery-powered, sensor-activated, water closet flushometer with
a dual- flush side mount unit for top spud floor mounted or wall hung bowls.

►► Flush CycleFlush Cycle

Sloan 111-1.6/1.1 DFSM Full Flush Large Black Button (1.6 gpf/6.0 Lpf)
Reduced Flush Small Green Button (1.1 gpf/4.2 Lpf)

►► SpecificationsSpecifications

Quiet, Exposed, Diaphragm Type, Chrome Plated Closet Flushometer with
the following features:

● ● PERMEX® synthetic rubber diaphragm with linear filtered bypass and
Vortex Cleansing Action™

● ● ADA Compliant Battery Powered Infrared Sensor for automatic “No
Hands” operation

● ● Chrome Plated Infrared Sensor Housing

● ● Can be Mounted on either the Left or Right Side of Valve

● ● Non-Hold-Open True Mechanical Override Full Flush/Dual Flush Buttons

● ● If the user is present for less than one minute and leaves the sensing
zone or chooses the small GREEN override button, a reduced flush
initiates (1.1 gpf/4.2 Lpf) eliminating liquid and paper waste, saving 1/2
gallon of water

● ● If the user is present for greater than one minute and leaves the zone or
chooses the large BLACK override button, the full flush initiates (1.6
gpf/6.0 Lpf) eliminating solid waste and paper

● ● Reduces water volume by up to 30% when a reduced flush occurs

● ● Four (4) Size C alkaline Batteries included: Duracell® with DURALOCK
Power Preserve Technology™-guaranteed for up to 10 years in storage

● ● “Low Battery” Flashing LED

● ● “User in View” Flashing LED

● ● 72-Hour Sentinel Flush

● ● Infrared Sensor Range Adjustment Screw and Reset Button

● ● 1” I.P.S. Screwdriver Bak-Chek® Angle Stop with Vandal Resistant Stop
Cap

● ● Spud Coupling and Flange for 1-1/2” Top Spud

● ● Sweat Solder Adapter w/Cover Tube and Cast Wall Flange with Set
Screw

● ● Flush Accuracy Controlled by CID Technology

● ● No External Volume Adjustment to Ensure Water Conservation

● ● Handle Packing, Main Seat, Stop Seat and Vacuum Breaker Molded
from PERMEX® Rubber Compound for Chloramine resistance

Valve Body, Tailpiece and Control Stop shall be in conformance with ASTM
Alloy Classification for Semi-Red Brass. Valve shall be in compliance with the
applicable sections of ASSE 1037, ASME 112.18, ASME 112.19, ANSI 117.1.
Installation conforms to ADA requirements.

►► VariationsVariations

DFB Dual Bypass Diaphragm

►► AccessoriesAccessories

See Accessories Section and Optima Plus Accessories Section of the Sloan
catalog for details on these and other Optima Plus Flushometer variations.

►► FixturesFixtures

Consult factory for matching Sloan brand fixture options.

►► Control CircuitControl Circuit

Solid State

6 VAC/7.6 VDC Input 8 Second Arming Delay 72 Hour Sentinel Flush

72 Hour Sentinel Flush

2-3 Second Arming Delay

►► Sensor TypeSensor Type

►► Smart Sense Technology™Smart Sense Technology™

Sloan’s DFSM flushometers are equipped with Smart Sense Technology™,
which applies extended range and logic techniques to significantly reduce
water usage. The DFSM flushometer automatically delivers a reduced flush
when users are present less than 60 seconds. Please contact Sloan for
specific details.

►► Automatic OperationAutomatic Operation

Sloan’s DFSM flushometers are activated via multi-lobular infrared sensor. By
detecting user presence and duration, the DFSM unit will determine the
proper flush volume for unequalled water efficiency.

►► Manual OperationManual Operation

Sloan’s electronic Dual-Flush Side Mount (DFSM) flushometers incorporate
intuitive split-button design for easy manual activation. Assuming a 1.6 gpf
diaphragm kit, the small GREEN button controls the reduced flush cycle (1.1
gpf/4.2 Lpf), the large BLACK button controls the full flush cycle (1.6 gpf/6.0
Lpf). Straightforward graphics alert user to proper activation. Reduced flush
for liquid waste, full flush for solid waste.

►► Service ModeService Mode

Features service mode which ignores targets for 10 minutes to enable fixture
to be cleaned or serviced.

►► HygienicHygienic

Touchless, sensor activation eliminates the need for user contact to help
control the spread of infectious diseases. The Sloan DFSM are provided with
Reduced or Full Flush Override Buttons to allow a “courtesy flush” for
individual user comfort. The 72-Hour Sentinel Flush keeps fixture fresh during
periods of non-use.

►► Compliance & CertificationsCompliance & Certifications

This space for Architect/Engineer Approval

Sloan® Flushometers
111-1.6/1.1 DFSM DFB

2016-02-06 Page 1 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com

Infrared Convergence Type Object Lock Detection

►► Sensor RangeSensor Range

Factory Set at 22” - 42” (559 mm-1067 mm)

►► Battery TypeBattery Type

(4) C Alkaline

►► Battery LifeBattery Life

3 Years @ 3,000 Flushes/Month

►► Indicator LightsIndicator Lights

User in View

►► Valve Operating Pressure (Flowing)Valve Operating Pressure (Flowing)

25-80 psi (172-552 kPa)

►► DFSM DIMENSIONSDFSM DIMENSIONS

►► OPERATIONOPERATION

►► ROUGH-INROUGH-IN

Sloan® Flushometers
111-1.6/1.1 DFSM DFB

2016-02-06 Page 2 of 2

SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. SLOAN 10500 SEYMOUR AVE. ● FRANKLIN PARK, ● IL. 60131 60131

Ph: 1-800-9-VALVE-9 or 1-847-671-4300 ● Fax: [phone] or 1-847-671-4380 ● http://www.sloan.com