Sloan 110, 111, 115, 136, 180 Installation Instructions Manual

Code No. 0816178

Rev. 2 (04/07)

INSTALLATION INSTRUCTIONS FOR EXPOSED GEM•2

®

PISTON TYPE WATER CLOSET AND URINAL FLUSHOMETERS

LIMITED WARRANTY

Sloan Valve Company warrants its Gem•2®Flushometers to be made of first class materials, free from defects of material or workmanship under normal use and to
perform the service for which they are intended in a thoroughly reliable and efficient manner when properly installed and serviced, for a period of three years (1 year
for special finishes) from date of purchase. During this period, Sloan Valve Company will, at its option, repair or replace any part or parts which prove to be thus
defective if returned to Sloan Valve Company, at customer’s cost, and this shall be the sole remedy available under this warranty. No claims will be allowed for labor,
transportation or other incidental costs. This warranty extends only to persons or organizations who purchase Sloan Valve Company’s products directly from Sloan Valve
Company for purpose of resale.

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT IS SLOAN VALVE COMPANY
RESPONSIBLE FOR ANY CONSEQUENTIAL DAMAGES OF ANY MEASURE WHATSOEVER.

Closet Flushometer for

1½” Back Spud

MODELS 120, 121, 122 & 137

Urinal Flushometer for

1¼” Top Spud

MODEL 180

Urinal Flushometer for

¾” Top Spud

MODEL 186

Closet Flushometer for

1½” Top Spud

MODELS 110/111, 115 & 136

Made in the U.S.A.

2

VALVE ROUGH-IN

MODELS 110/111, 115

MODELS 120, 121, 122

MODEL 136

MODEL 137

MODEL 180

MODEL 186

NOTE: Requires 1” I.P.S.

(DN 25 mm) Supply.

NOTES:

• WHEN MOUNTED ON AN ADA ACCESSIBLE
BOWL, THE ROUGH-IN TO THE SUPPLY
INLET SHOULD BE NO HIGHER THAN 37½”
(953 mm) OR THE HANDLE WILL EXCEED
MAXIMUM HEIGHT ALLOWANCES UNDER
ADA GUIDELINES.

• NEW ADAAG GUIDELINES ALLOW FOR SPLIT
OR OFFSET GRAB BARS, CHECK WITH
LOCAL AUTHORITIES OR REFERENCE
SECTION 604.5.2 OF ADAAG.

† 1” CONTROL STOP IS AVAILABLE WITH

WHITWORTH THREAD.