Travis 3003 User’s Manual
(Note: The User Manual is for Both Receiver and Transmitter)
(Receiver Model No:
3003TR / 3003TR RX)
This remote control SYSTEM offers the user a
battery-operated remote control that operates most
millivolt gas valves used in some heater rated gas
logs, gas fireplaces and other gas heating
appliances.
The transmitter operates on (2) 1.5V AAA batteries.
It is recommended that ALKALINE batteries
always be used for longer battery life and maximum
operational performance.
Before using the transmitter， install the (2) AAA
transmitter batteries into the battery compartment.
(Use caution that batteries are installed in the proper
direction)
Receiver
(Receiver Model No: 3003TR / 3003TR RX)
TO WORK WITH TRANSMITTER
Put the receiver’s plug in the socket. Connect the Fan / Light / Gas valves to the jack of Receiver
Use the transmitter to control the power on/off of Fan / Light / Gas valves.
KEY SETINGS
MODE – Changes unit to ON / Thermo / OFF
mode position.
UP / DOWN – Changes temperature, time(r) and
other functions’ value.
TIMER / FAN / FLAME / LIGHT - Changes
each function to enable or disable.
OK - Sets temperature, time(r) and other
functions.
Loading...