Page 1
CAT5 VGA Extenders
User Manual English
32537, 32538, 32539
Introduction
Thank you for purchasing one of the products from our CAT5 VGA Extender range. With a
CA
T5 VGA Extender you can locate your monitor(s) up to 300m away from your
computer.
This manual covers the following products:
CAT5 VGA Extender No. 32537
CAT5 VGA Extender & Splitter , 8 Port No. 32538
CAT5 VGA Extender, Remote Unit No. 32539
The CAT5 VGA Extender system is made up of a transmitter (local) and a receiver (remote)
unit that are connected together by CAT5 twisted pair cable (not included). The remote receiver
unit connects to your distant monitor(s); the local transmitter unit connects to the computer
system’s video port and, optionally, to a secondary local monitor.
The CAT5 VGA Extender (No. 32537) is supplied with both a transmitter and receiver unit; the
CAT5 Extender & Splitter (No. 32538) consists of a transmitter only and requires up to 8
additional remote units (No. 32539) which must be purchased separately according to your
requirements.
Package Contents
CAT5 VGA Extender, No. 32537
CAT5 VGA Extender, Local Transmitter Unit
CAT5 VGA Extender, Remote Receiver Unit
2 x power supplies, 12V DC, 1.25A
1.2m VGA cable (15 Way HD Male to 15 Way HD Male)
This manual
CAT5 8 Port VGA Extender & Splitter, No. 32538
CAT5 VGA Extender & Splitter, 8 Port, Local Transmitter Unit
Power supply, 12V DC, 1.25A
1.2m VGA cable (15 Way HD Male to 15 Way HD Male)
This manual
CAT5 VGA Extender, Remote Receiver Unit, No. 32539
CAT5 VGA Extender, Remote Unit
Power supply, 12V DC, 1.25A
This manual
Page 2
CAT5 VGA Extender
Receiver Unit
CAT5 8 Port VGA Extender
& Splitter Transmitter Unit
CAT5 VGA Extender
Transmitter Unit
Product Information
Distances and Resolutions when using CAT5/5e and CAT6 cable
For best results, we recommend you use CAT5 cable. The table below shows the typical
resolutions and distances you can expect to achieve when using the various types of cable.
Cable Distance Resolution
50m 2048 x 1536
100m 1280 x 1024
150m 1024 x 768
200m 800 x 600
CAT5/5e
300m 640 x 480
30m 1920 x 1440
50m 1280 x 1024
CAT6
100m 800 x 600
Installation Examples
Local monitor
Remote
monitor
Up to 300m using
CAT5 cable
This example shows how a single video
output can be extended by up to 300m using
the CAT5 VGA Extender Transmitter and
Remote units.
Mac or PC
The example below
shows how a single
video output can be extended by up to
300m to multiple displays using the
8
Port VGA Extender
& Splitter. Each
remote monitor is connected via CAT5
cable and a Remote Receiver unit.
Local monitor
Up to 8 remote monitors
Up to 300m using CAT5 cable
Mac or PC
Page 3
Use the supplied VGA cable to
connect the VGA output from
your computer to this INPUT port
Plug a local monitor
into this OUTPUT port
Connect the power
supply to this socket
Connect the CAT5 cable to
this RJ-45 port
The Power LED will illuminate
when the power is connected
Product Connections & Installation
Make the following relevant connections BEFORE powering up your computer and monitor(s)
CAT5 VGA Extender, Local Transmitter Unit
CAT5 VGA 8 Port Extender & Splitter
Connect one CAT5 cable for
each remote monitor, to these
RJ-45 ports
Use the supplied VGA cable to
connect the VGA output from
your computer to this INPUT port
Plug a local monitor
into this OUTPUT port
The Power LED will illuminate
when the power is connected
Connect the power
supply to this socket
Using a Philips screwdriver, adjust the EQ control until any shadowing effect,
as illustrated on the left hand side, i
s reduced to an acceptable level, as on the
right. Adjust the GAIN control until you achieve a satisfactorily bright picture.
CAT5 VGA Extender, Remote Unit
Adjusting the Remote Monitor Picture Quality
On the base of the unit, the CAT5 VGA Extender Remote provides controls for adjusting and
improving the picture quality of the connected remote monitor.
EQ: Equalisation adjustment (sharpens the picture)
GAIN: Adjusts picture brightness
A good method to check and adjust the picture quality is to display a high contrast image, with
vertical edges, on the remote screen. Launch a word processor and type a large capital ‘H’ in
the centre of the screen. Use a bold black font, with a size of 72 points or higher, on a white
background.
Plug the remote
monitor into this
VGA IN port
Connect the power
supply to this socket
Connect the CAT5 cable to
this RJ-45 port
The Power LED will illuminate
when the power is connected
Page 4
WEEE (Waste of Electrical and Electronic Equipment),
Recycling of Electronic Products
United Kingdom
In 2006 the European Union introduced regulations (WEEE) for the collection and recycling of all waste electrical
and electronic equipment. It is no longer allowable to simply throw away electrical and electronic equipment.
Instead, these products must enter the recycling process.
Each individual EU member state has implemented the WEEE regulations into national law in slightly different
ways. Please follow your national law when you want to dispose of any electrical or electronic products.
More details can be obtained from your national WEEE recycling agency.
Germany / Deutschland
Die Europäische Union hat mit der WEEE Direktive umfassende Regelungen für die Verschrottung und das
Recycling von Elektro- und Elektronikprodukten geschaffen. Diese wurden von der Bundesregierung im Elektround Elektronikgerätegesetz – ElektroG in deutsches Recht umgesetzt.
Dieses Gesetz verbietet vom 24.März 2006 an das Entsorgen von entsprechenden, auch alten, Elektro- und
Elektronikgeräten über die Hausmülltonne! Diese Geräte müssen den lokalen Sammelsystemen bzw. örtlichen
Sammelstellen zugeführt werden! Dort werden sie kostenlos entgegen genommen. Die Kosten für den weiteren
Recyclingprozess übernimmt die Gesamtheit der Gerätehersteller.
France
En 2006, l'union Européenne a introduit la nouvelle réglementation (WEEE) pour le recyclage de tout équipement
électrique et électronique.
Chaque Etat membre de l’ Union Européenne a mis en application la nouvelle réglementation WEEE de manières
légèrement différentes. Veuillez suivre le décret d’application correspondant à l’élimination des déchets électriques
ou électroniques de votre pays.
Italy
Nel 2006 l’unione europea ha introdotto regolamentazioni (WEEE) per la raccolta e il riciclo di apparecchi elettrici
ed elettronici. Non è più consentito semplicemente gettare queste apparecchiature, devono essere riciclate.
Ogni stato membro dell’ EU ha tramutato le direttive WEEE in leggi statali in varie misure. Fare riferimento alle
leggi del proprio Stato quando si dispone di un apparecchio elettrico o elettronico.
Per ulteriori dettagli fare riferimento alla direttiva WEEE sul riciclaggio del proprio Stato.
32537, 32538, 32539
1
st
Edition June 2006
CE Statement
This device complies with the European Regulations for Electromagnetic Compatibility (EMC) of the European Union and it is equipped with
the CE mark. This unit has to be used with high quality shielded connection cables. Only if these high quality shielded cables are used can
it be sure that the EMC compatibility is not adversely influenced.
FCC Statement
Shielded cables must be used with this equipment to maintain compliance with radio frequency energy emission regulations and ensure a
suitably high level of immunity to electromagnetic disturbances.
FCC Warning
This equipment has been tested and found to comply with the limits for a Class B Digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment and receiver
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
Consult the dealer or an experienced technician for help
You are cautioned that changes or modifications not expressly approved by the party responsible for compliance could void your authority to
operate the equipment.
Loading...