Skullcandy S2SSW-M003 Instruction manual

0 (0)
Skullcandy S2SSW-M003 Instruction manual

INDY USER GUIDE, TROUBLE SHOOTING & FAQ’S

1

TROUBLE SHOOTING

PAIRING ISSUES?

Issue: The biggest challenge with truly wireless earbuds is maintaining a paired status between both independent buds. There are times when (due to the capacitive touch sensor technology) the user will accidentally clear one side without the other, this can create a pairing challenge as each side will now be in different search modes when powered on. Easy fix!

Solution:

1- Turn the Bluetooth on your (mobile or computer) device OFF

2- Power on your Indy buds (they will be in a NON_CONNECTED or non-paired state due to Bluetooth being off on your device)

3- Tap the center of EACH bud 4 times (see below diagram). This will automatically power off the ear bud and reset your ear buds. You must complete this action on BOTH ear buds while in this non-connected state.

4- Next, place the buds back in the case then pull them out to have them power on and start the process of paring to one another.

5- You will hear a voice prompt that will notify you that it is now “Pairing” and one beep indicating the buds have paired together,

6- At this time, turn your device’s Bluetooth back on and re-pair it to Indy. In some cases you will want to forget Indy on your device and scan until Indy is identified again and you can select it.

BUDS NOT CHARGING IN CASE/CASE LID NOT CLOSING PROPERLY?

Issue: Not seeing the RED led indicator on the bud when you’ve placed your Indy back in the case

Solution:

1- Check to see if any debris is blocking the charging pins at the bottom of the case, or on the bud. 2- Check to see if the removable Stability Ear Gel or in-ear gels have been twisted or falling off,

this could be keeping the buds from sitting correctly in the case.

3- This same issue could also be interfering with your case lid when closing, if you’re having a hard time closing the lid correctly, this is an indicator that buds are not set correctly or the gels are interfering.

FAQ’s

BATTERY & CHARGE:

What is the total charging time for Indy?

-1 hour for the Earbuds to charge to 100% inside the Case

oNote: This product has Rapid Charge. This means that you can charge your earbuds in the case for 10 minutes to get 1.2 hours play time

2

Loading...
+ 2 hidden pages