
Operating Instructions
Tel: 724-941-9701 Fax: 724-941-1369 e-mail: skctech@skcinc.com
Cyclone Calibration Chamber
863 Valley View Road, Eighty Four, PA 15330
Catalog No. 225-01-03
The calibration chamber is for monitoring the fl ow through a
fi lter/cyclone. It is designed to fi t cyclones Cat. No. 225-01-01 and
225-01-02.
Assemble the fi lter/cyclone assembly in the normal way and connect
to the sample pump.
Moisten the O-ring inside the large end of the chamber and push onto
the enlarged section of the cyclone extension. Connect the small end
to a fl owmeter or other calibration instrument such as the Defender
717 Series. Use 1/4 in ID tubing to make the connection and maintain
as short as possible. (See illustration on reverse side.)
Turn on pump and read fl ow from the calibrator.
SKC Limited Warranty and Return Policy
SKC products are subject to the SKC Limited Warranty and Return Policy,
which provides SKC’s sole liability and the buyer’s exclusive remedy. To view
the complete SKC Limited Warranty and Return Policy, go to h p://www.
skcinc.com/warranty.asp.
Form #37370 Rev 1102
AIRCHEK
SAMPLER
SAMPLE PERIOD Ñ MINUTES
START
HOLD
SET-UP MODE
DIGIT
SELECT
TOTAL
ELAPSED
TIME
FLOW
ADJ
U
LISTED 124U
L
¨
FLOW
AND
BATTERY
CHECK
AIRCHEK SAMPLER
MODEL 224-PCXR8
DIGIT
SET
PUMP
RUN
TIME
ON
5
4
3
2
1