CONGRATULATIONS! Your new Streamer GT™ SIR-SL1 portable Plug-n-Play Receiver kit lets you
enjoy SIRIUS® Satellite Radio’s digital entertainment on the road or at home. (Home use requires the
Home Docking Kit sold separately.) Use this manual to familiarize yourself with all of Streamer GT’s
features and capabilities. For the latest information about this and other SIRIUS products, visit
www.sirius.com
Unpack your Streamer GT carefully and make sure that everything shown here is present:
Clip Mount
Streamer GT ReceiverRemote Control
Vehicle Power Adapter
Antenna
If anything is missing or damaged, or if your Streamer GT Receiver fails to operate, notify your dealer
immediately. It is recommended that you retain the original carton and packing materials in case you need
to ship your Receiver in the future.
Streamer GT SIR-SL1 User Guide
Suction Cup Mount
3
Safety Precautions
Warning
Take the following precautions to prevent traffic
accidents and avoid personal injury:
• Installation must be performed according to this
user guide. Sirius Satellite Radio is not
responsible for issues arising from installations
not performed according to the procedures in this
manual.
• Do not install the unit where it may obstruct your
view through the windshield or your vehicle’s
indicator displays.
• Do not install the unit where it may hinder the
function of safety devices such as an airbag.
Doing so may prevent the airbag from functioning
properly in the event of an accident.
• The installation and use suggestions contained in
this user guide are subject to any restrictions or
limitations that may be imposed by applicable
law—the purchaser should check applicable law
for any restrictions or limitations before installing
and/or operating this unit.
• Failure to follow these safety instructions and
warnings may result in a serious accident.
4
Warning
Take the following precautions to prevent fire and
avoid personal injury:
• To avoid short circuits, never put or leave any
metallic objects (coins, tools, etc.) inside the unit.
• If the unit emits smoke or unusual odors, turn the
power off immediately and contact Brix Technical
Support at 866-253-7027.
• Do not drop the unit or subject it to strong
shocks.
• If the LCD display becomes damaged or broken,
do not touch the liquid crystal fluid. The fluid can
be dangerous to your health. If the liquid crystal
fluid contacts your body or clothing, immediately
wash it off with soap and water .
Caution
Take the following precautions to keep the unit in
proper working order:
• Be sure the unit is connected to a 12V DC power
supply with a negative ground connection.
• Do not open the unit.
• Do not install the unit where it will be exposed to
high levels of humidity, moisture, or dust.
Streamer GT SIR-SL1 User Guide
• When replacing a fuse, use only a new one with
the proper rating. Using a fuse with the wrong
rating may cause the unit to malfunction.
• To prevent a short circuit when replacing a fuse,
first disconnect the wiring harness.
Note
If the unit doesn’t seem to be working properly:
• Turn the unit’s power of f, wait 5 – 10 seconds, then
turn the power on again.
• If the unit still malfunctions, turn the unit’s power
off, remove it from the cradle, wait 5 – 10 seconds,
replace it in the cradle and turn the power back on.
If the problem persists, contact Brix Technical
Support at 866-253-7027
FCC Warning
This equipment may generate or use radio frequency
energy. Changes or modifications to this equipment
may cause harmful interference unless the
modifications are expressly approved in this user
guide. The user could lose the authority to operate
this equipment if an unauthorized change or
modification is made.
Streamer GT SIR-SL1 User Guide
Note
This equipment has been tested and found to
comply with Part 15 of the FCC Rules. These rules
are designed to provide reasonable protection
against harmful interference. This equipment may
cause harmful interference to radio
communications if it is not installed and used in
accordance with these instructions. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment
off and on, the user is encouraged to try to correct
the interference by one of more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment
and Streamer GT Receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the Streamer GT
Receiver is connected
• Consult the dealer or an experienced radio/TV
technician for help.
5
Cleaning the Unit
If the unit becomes dirty, turn its power off and wipe
it clean with a soft dry cloth. Do not use hard
cloths, paint thinner, alcohol, or other volatile
solvents to clean the unit. These may cause
damage or remove indicator characters.
Warning
Do not operate the unit in a way that might divert
your attention from driving safely. As a driver, you
alone are responsible for safely operating your
vehicle in accordance with traffic safety laws at all
times.
6
Receiver Controls and Features
1. POWER Button : Turns Receiver On and
Off.
2. Channel Switch (CHAN) & Select Button:
Navigates through channels & display screens
and makes selections of items highlighted on the
display. Pressing up increases or moves up in the
menus. Pressing down decreases or moves down
in the menus. Pressing in duplicates the function
of the Select button.
3. CATEGORY Buttons: Navigates through
Category List Screen which displays SIRIUS
Channel Categories.
4. Display Button: Toggles display between
category/channel name.
5. Menu Button: Used to access menu options to
make setup and feature changes.
6. Select Button: Selects an option on the screen.
7. Preset Number Buttons (0-6): Sets and selects
preset channels.
8. Memory (MEMO) Button (S-Seek Function):
Saves and recalls artist names and song titles.
You can store up to 20 artist/song title
combinations.
Streamer GT SIR-SL1 User Guide
9. Band Button (P.Tune): Pressing and
releasing switches between the five preset
banks (A... E), which hold six presets each.
Pressing and holding enables “Preset Tune
Mode”, which allows for viewing and listening
of stored presets with the Channel Switch.
10.Remote Control Receiver: Receives
signals from the included wireless remote
control.
11.DC 12V: Input jack for cigarette lighter
adapter or 12V DC power supply.
12.FM OUT: FM Output for use with wired FM
switch box accessory (sold separately).
13.ANTENNA: Input jack for SIRIUS antenna.
14.VOL: Volume control for audio out jack.
15.AUDIO OUT: Audio line output or
headphone jack.
5
1
7
9
6
11
12
4
2
8
10
3
13
14
15
Streamer GT SIR-SL1 User Guide
7
Remote Control
1
2
3
9
7
10
8
5
1. POWER Button : Turns Receiver ON and OFF.
2. Channel Buttons: Navigate through channels and display screens.
3. Category Buttons: Navigate through categories and display screens.
4
4. Mute Button: Mutes audio.
5. DIRECT Button: Accesses channels directly by number.
6
6. SELECT (SEL) Button: Selects items highlighted on the display; hold-
down to jump to the previously-received Channel.
7. MENU Button: Enters and exits the Setup Mode.
8. MEMORY (MEMO) Button: Saves & recalls song & artist information;
13
sets Parental Lock code number.
9. DISPLAY Button: Changes text size of artist names and song titles.
10. BAND Button: Switches between preset bands A... E.
11. Number Buttons (0-9): Select channels directly and by preset.
12. Previous Button: Tunes to the last tuned channel.
11
13. VOL+/ VOL- Buttons: Adjust the volume up & down.
12
Installing Batteries in the Remote
1. Remove the battery cover.
2. Install CR2025 battery. (+ side is up)
3. Replace the battery cover.
8
Streamer GT SIR-SL1 User Guide
Activating your SIRIUS Subscription
Before you can listen to the Receiver, you must
subscribe to SIRIUS Satellite Radio’s service.
1. Make sure that the Streamer GT Receiver is
properly connected and that its antenna is
oriented to receive the SIRIUS satellite signal.
2. Press the power button to turn the Receiver ON.
After displaying the SIRIUS logo, the Receiver
will update all the SIRIUS channels. The display
will read “UPDATING CHANNELS” on the top
line and “X% Completed” (0%-20%-40%-60%80%-100%) on the bottom line until the update
completes.
NOTE: Don’t push any buttons or perform any
operations until updating has been
completed. Once updated and the SIRIUS
channels are received, the display will change to
“Call 1-888-539-SIRIUS to Subscribe” and will
place you in SIRIUS Satellite Radio’s Preview
Channel. Channel 184 is the SIRIUS preview
channel. You will not be able to tune to any other
channels until you activate your SIRIUS
subscription.
Streamer GT SIR-SL1 User Guide
4. Press the MENU button to enter the “Menu
Options” mode. The “SIRIUS ID” menu option will
now be highlighted.
5. Push the Select button to select “SIRIUS ID”. This
will display your unit’s unique 12-digit SIRIUS ID
Number (SID). This SID number should also be
available on the Streamer GT Receiver packaging.
Write the number down and have your credit card
handy. A space has been provided at the end of
this manual to write your SID.
6. Contact SIRIUS on the Internet:
https://activate.siriusradio.com/
Follow the prompts to activate your subscription.
You can also call SIRIUS toll-free at 1-888-539SIRIUS (1-888-539-7474).
9
Vehicle Installation: Mounting the Receiver
Power In
(12V DC)
FM OUT
Antenna In
Audio/
Headphone
Out
1. Determine where you want to mount
the SIR-SL1 Receiver with the Mobile
Docking Station:
• Do not install the SIR-SL1 Receiver
where it may obstruct your view
through the windshield or your view
of your vehicle’s indicator displays.
• Do not install the SIR-SL1 Receiver
where it will hinder your access to
the vehicle’s controls.
• Do not install the SIR-SL1 Receiver
where it may hinder the function of
safety devices such as an airbag.
Doing so may prevent the airbag
from functioning properly in the
event of an accident.
• Find a location that provides good
visibility of and access to the SIRSL1 Receiver’s front panel.
• It is strongly recommended that you
mount the SIR-SL1 Receiver using
the provided Suction Cup Mount,
adhered to the windshield.
10
Streamer GT SIR-SL1 User Guide
• Snap the Clip Mount on to the back of the SIRSL1 Receiver.
• Slide the SIR-SL1 Receiver with Clip Mount on
to the Suction Cup Mount so that the Clip
Mount is securely locked in place.
2. Plug the vehicle power adapter into the SIR-SL1
Receiver. Don’t plug the adapter into the
cigarette lighter until the installation is
completed.
Connecting to your Car Stereo
1. If your vehicle stereo has an AUX input, plug a
3.5mm audio cable into the Audio Out connector
on the SIR-SL1. Plug the audio cable’s white (L
ch) and red (R ch) connectors into your car stereo.
2. Alternatively, you can use the integrated FM
transmitter to connect your Streamer GT Receiver.
See the Menu Options section in this manual for
more information on configuring the FM
transmitter. Tune your vehicle’s radio to the
appropriate frequency to listen to the Receiver.
Streamer GT SIR-SL1 User Guide
11
Loading...
+ 25 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.