User Guide
SIRIUS CONNECT™
Veh icl e K it
Congratulations on the Purchase of your new SCVDOC1
SiriusConnect Vehicle Docking Kit
The SCVDOC1 SiriusConnect™ Vehicle Docking Kit will turn your SIRIUS Dock & Play
radio into a dedicated tuner, allowing you to control your SIRIUS radio from the audio
headunit in your vehicle. A direct audio connection from the SIRIUS radio means that
you can enjoy t he rich, clear sound of the SIRIUS digital broadcasts over your vehicle’s
audio system.
The SCVDOC1 is designed to work with any Sirius-Ready or SAT Radio Ready
headunit, however, some headunits may require the use of a SiriusConnect Interface
Adapter (sold separately). Please consult the headunit manufacturer for more details
concerning compatibility and interface availability.
The SCVDOC1 is compatible with the SIRIUS® Stiletto™, Sportster™, Starmate™,
Stratus™ radios that have the Sirius Universal Docking Connector. For the latest
information about this and other SIRIUS products and accessories, visit http://www.
sirius.com.
Compatible with Sirius-Ready or SATRadio Ready Headunits:
May require a SiriusConnect Interface
Adapter (sold separately):
Table of Contents
TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
COPYRIGHTS & TRADEMARKS . . . . . . . . . . . . . . . . . . . . . .4
WARNING AND SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . 5
FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Canadian Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
CONTROLS AND CONNECTORS . . . . . . . . . . . . . . . . . . . . . . 9
INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Installing the Dock . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mounting the Magnetic Antenna . . . . . . . . . . . . . . . . . . . . . . 17
OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
[ Tabl e o f Co nte nts ]
3
Copyrights & Trademarks
© 2007 Sirius Satellite Radio Inc. All Rights Reserved.
® “SIRIUS”, the SIRIUS dog logo, channel names and logos are trademarks of Sirius
Satellite Radio Inc. All Rights Reserved.
™ “SiriusConnect”, “Stiletto”, “Sportster”, “Starmate”, and “Stratus” are trademarks of
Sirius Satellite Radio Inc.
Hardware, subscription, and activation fee required. For full Terms & Conditions, visit
http://sirius.com. Prices and programming are subject to change. Not available in HI
and AK. Equipment and subscription sold separately. Installation required with some
equipment.
[ Copy rig hts & T rade mar ks ]
4
Warning and Safety Information
FCC Information
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
This device may not cause harmful interference, and
1.
This device must accept any interference received, including interference that
2.
may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for
a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference
when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radi o or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
1.
Increase the separation between the equipment and the receiver.
2.
Connect the equipment into an outlet on a circuit different from that to
3.
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
4.
WARN ING
Changes or modifications not expressly approved by the manufacturer could void the
user’s authority to operate the equipment.
[ Warn ing and Sa fety In formati on ]
5
Canadian Compliance
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Safety Precautions
Be sure to observe the following warnings. Failure to follow these safety instructions
and warnings may result in a serious accident and/or personal injury.
Install the cables and wiring so that it is not crimped or pinched by screws or
•
sharp metal edges. Route the cables away from moving parts or sharp pointed
edges. This will prevent crimping and damage to the wiring. If the wiring must pass
through a metal hole, be sure to use a rubber grommet to prevent the wire’s insulation from being cut by the metal edge of the hole.
Use caution if you need to disconnect the vehicle’s battery terminal. Please consult
•
the vehicle’s owner’s manual or a service technician prior to removing the battery
positive or ground connection as it may cause damage to the vehicle’s electrical
system or require reprogramming of the vehicle’s computer-controlled devices.
Do not operate any function that takes your attention away from safely driving your
•
vehicle. Any function that requires your prolonged attention should only be performed after coming to a complete stop. Always stop the vehicle in a safe location
before performing these functions. Failure to do so may result in an accident.
Do not open, disassemble or alter the unit in any way. Doing so may result in fire,
•
electric shock or product damage.
Do not insert any objects into the unit. Doing so may result in fire, electric shock or
•
product damage.
Do not install in locations that might hinder vehicle operation. Doing so may ob-
•
struct vision or hamper movement which can result in a serious accident.
Do not install the unit to high levels of humidity, moisture or dust. Doing so can
•
result in electric shock or product failure.
[ Warn ing and Sa fety In formati on ]
6
Package Contents
The following items are included with your purchase of the SCVDOC1 SiriusConnect
Vehicle Docking Kit. Unpack the kit carefully and make sure that everything shown is
present. If anything is missing or damaged, or if the kit fails to operate properly, notify
your dealer immediately. It is recommended that you retain the original carton and
packing materials in case you need to ship your kit in the future.
Radio Adapter 1
Siriu sConnect DockSiriu sConnect Dock
Radio Adapter 2Radio Adapter 2 Radio Adapter 4Radio Adapter 4
Note that the Ra dio Adapter 1 sho wn abo ve is pre-install ed on the SiriusConnect Dock.
*
Radio Adapter 3Radio Adapter 3
[ Pack age Con ten ts ]
*
7
A
B C D E F
Pedes tal Moun tPedes tal Moun t
Siriu sConnect
Siriu sConnect
Inter face Cab le
Inter face Cab le
Note that Screw D is pre-installed in the SiriusConnect Dock.
*
Note that the Rubber Feet & Grommet are pre-installed on the SiriusConnect Dock.
**
Magne tic Ante nna & Ru bber Cov er/TailMagne tic Ante nna & Ru bber Cov er/Tail Alcoh ol WipeAlcoh ol Wipe
Rubbe r Feet
Screw s*Screw s
*
Rubbe r Feet
& Gro mmet
& Gro mmet
**
**
The following compatibility chart shows which SIRIUS radios are compatible with each
radio adapter:
Radi o Adapter Comp atible with thes e SIRIUS radios
Adapter 1 (preinstalled) Sportster 5, Starmate 3 & 4, Stratus & Strat us 4
Adapter 2 Sportster 3 & 4
Adapter 3
Stiletto 10 & 100 (The Stiletto 10 & 100 require v1.1
software (or higher) to support SiriusConnect mode.)
Adapter 4 Stiletto 2
[ Pack age Con ten ts ]
8
Controls and Connectors
Locking
Screw Hole
Radio Release Button
Radio Adapter
Mounting Hole
Dock
Mounting Hole
Antenna
Connector
Sirius Universal Docking Connector
Radio Adapter
Alignment Holes
SiriusConnect
Interface Connecto
r
Pedestal Mount
Mounting Holes
Bottom
View
Front
View
Back
View
Figur e 1Figur e 1
Figure 1 and the table following identify and describe the controls, connectors, and
various mounting connections of the dock.
[ Conn ect ors & C ontr ols ]
9
Radi o Adapter
7
6
3
1
8
4
5
2
1
2
3
4
5
6
7
8
Battery
Power Enable
Serial Data (RX)
Ground
Audio Right
Serial Data (TX)
Audio Ground
Audio Left
DIN CABLE
PIN CONNECTIONS
Moun ting Hole
Dock
Moun ting Hole
Radi o Release Button
Radi o Adapter
Alig nment Holes
Siri us Universal Doc king
Conn ector
Ante nna Connector
Siri usConnect Interf ace
Conn ector
10
Desc ription of Dock Controls, Connec tors, and Mounti ng Connections
Cont rol/Connector/
Moun ting Connection
Desc ription
The Radio Adapter is secured to the dock by attaching it with a screw (D) to this hole.
The dock can be mounted to a flat surface in the
vehicle by using a screw (B) through this hole.
Pressing this button releases the SIRIUS radio from
the dock.
Tabs on the radio adapter align with these holes for
correct placement in the dock.
This connector plugs into the bottom of the SIRIUS
radio.
The SIRIUS magnetic vehicle antenna is connected to
this connector.
The SiriusConnect interface cable connects to this
connector. The other end of the DIN cable connects to
the headunit.
[ Conn ect ors & C ontr ols ]
Desc ription of Dock Controls, Connec tors, and Mounti ng Connections
Cont rol/Connector/
Moun ting Connection
Lock ing Screw Hole
Pede stal Mount
Moun ting Holes
When the lockin g screw (C) is tightened in to this hole,
it secures the SIRIUS radio to the dock by preventing
the release button from being pressed.
The pedestal mount is secured to the dock by
attaching it with screws (A) to these holes.
Desc ription
[ Conn ect ors & C ontr ols ]
11
Installation
It is recommended that prior to starting the installation, you read this installation section completely and then follow the instructions. In addition, consult the manual of the
headunit to which you will be connecting the dock to determine any required installation configuration.
Installing the Dock
Sele cting a Moun ting Locati on
The SCVDOC1 SiriusConnect Dock can be mounted most anywhere in the vehicle:
the glove box, the center console, under the dash, under a seat, in the trunk, etc.
When you have selected a possible mounting location, test fit the dock with your
SIRIUS radio in the dock to be sure it will fit in the selected location. If you will be
taking the SIRIUS radio with you when you leave your vehicle, be sure there is enough
clearance to remove the radio from the dock. If you intend to leave the SIRIUS radio
permanently attached to the dock, you can mount the dock in a more inaccessible
location.
When considering a mounting location, avoid the following locations:
Any location where the SIRIUS radio could be exposed to moisture
•
Any location where the SIRIUS radio could be exposed to extreme heat
•
Sele cting the Mo unting Meth od
There are two mounting options available for the dock. The various screws, rubber
feet, and grommet referenced in the mounting methods are identified on page 8.
Meth od 1: Using the rubber feet E and grommet F (pre-installed on the dock) and
securing the dock to the vehicle with the mounting screw B. (Figure 2) The rubber
[ Inst all atio n ]
12
feet and grommet prevent the dock from sliding when installed on a flat surface.
Rubber Feet (E)
Grommet (F)
Mounting
Screw (B)
Figur e 2Figur e 2
Meth od 2: Removing the rubber feet E and grommet F (pre-installed on the dock,
see Figure 2) and attaching the pedestal mount to the dock using the four mounting screws A, and securing the pedestal mount to the vehicle using the adhesive
on the pedestal foot. (Figure 3) You can also attach the pedestal by using two
screws (not supplied) through the optional mounting holes in the pedestal foot.
[ Inst all atio n ]
13
Mounting
Screws (A)
Pedestal Mount
Optional
Mounting Holes
Adhesive
Figur e 3Figur e 3
Atta ching the Ra dio Adapter
When you have mounted the dock, you should attach the radio adapter for your
SIRIUS radio to the dock. (Figure 4) There are three different radio adapters provided
for the SIRIUS radios. One radio adapter is pre-installed on the dock but may need to
be removed and replaced with the adapter for your particular SIRIUS radio. The different radio adapters are identified on page 7 and you should consult the compatibility
chart on page 8 to identify the adapter for your SIRIUS radio.
Attach the radio adapter for your radio using the radio adapter mounting screw D
(shown on page 8). When the radio adapter is properly fitted, the tabs on the rear of
the adapter will align with the corresponding alignment holes on the dock. (Refer to
Figure 1 on page 9 for the location of the alignment holes).
[ Inst all atio n ]
14
Radio Adapter
Mounting Screw (D)Radio Adapter
When the radio adapter has been attached to the dock, you can place your SIRIUS
Figur e 4Figur e 4
radio into the dock.
Inst alling the L ocking Scre w
If you will be permanently installing your SIRIUS radio in the dock, you can install the
locking screw to prevent the SIRIUS radio from being removed from the dock. Install
the locking screw C (shown on page 8) into the locking screw hole in the bottom of
the dock. The location of the locking screw hole is shown in Figure 1 on page 9.
Conn ecting the D ock to the Headun it
The SCVDOC1 SiriusConnect Vehicle Docking Kit is designed to work with any
Sirius-Ready or SAT Radio Ready headunit. Some headunits will require the use of a
SiriusConnect Interface Adapter. Please consult your headunit manufacturer for more
details concerning compatibility and interface availability. The SCVDOC1 can also be
integrated into select factory audio systems. Please consult your retailer for interface
[ Inst all atio n ]
15
compatibility options.
Siriu sConnec t 8-pin DIN Cable
Headu nit cab le to SiriusConnect Interface Cabl e
Headu nit
Bus C able
Optio nal
Siriu sConnec t
Inter face
Siriu sConnec t
Cable
Figur e 5Figur e 5
Figur e 6Figur e 6
Figur e 7Figur e 7
Figure 5 shows a Sirius-Ready or SAT Radio Ready headunit using the provided 8-PIN
DIN cable. Note that the headunit must be capable of directly communicating with the
SCVDOC1 SiriusConnect Dock protocol.
Figure 6 shows a Sirius-Ready or SAT Radio Ready headunit with an optional headunit
specific connector/adapter cable (not provided). Note that the headunit must be capable of directly communicating with the SCVDOC1 SiriusConnect Dock protocol.
Figure 7 shows a Sirius-Ready, SAT Radio Ready, or select OEM headunits with optional SiriusConnect Interface translator (not provided). Note that 3rd party SiriusConnect interface adapters are available for select OEM and aftermarket headunits.
16
[ Inst all atio n ]
Mounting the Magnetic Antenna
The installation of the magnetic antenna consists of two installation steps:
Mounting the magnetic antenna and cover/tail on the vehicle
•
Routing the antenna cable through the vehicle to the dock
•
The magnetic mount antenna has a strong magnetic mount designed to hold the
antenna in place during normal driving conditions (highway/city). This also allows for
easy removal for transferring the antenna to other vehicles.
Figure 8 shows the optimal mounting location for the antenna on several types of
vehicles. These mounting positions should be observed when installing the antenna:
Seda n/Coupe/SUV/Mini -Van: Install the antenna at the rear center of the roof,
•
near the rear window.
Pick up Truck: Install the antenna at the front center of the roof, near the wind-
•
shield.
Conv ertible: Install the antenna at the front center of the trunk lid, near the rear
•
window.
The antenna needs to have an unobstr ucted area of 3 inches by 3 inch es around it.
It is important to mount the antenna where no obstructions will block the antenna from
receiving the SIRIUS signal. Objects which can obstruct the antenna could be a roof
rack, a sunroof, a roof mounted cargo container, another antenna, etc. If your vehicle
has a potential obstruction, be sure that the SIRIUS antenna is mounted at least 3
inches away from it (but no closer than 3 inches from the roof edge, or trunk lid in the
case of a convertible).
[ Inst all atio n ]
17
Figur e 8Figur e 8
Sedan /CoupeSedan /Coupe
Picku p TruckPicku p Truck
SUV/M ini-VanSUV/M ini-Van
Conve rtibleConve rtible
Moun ting t he Ant enna on the Vehic le
Follow this procedure to mount the antenna:
Select an appropriate mounting position for your type of vehicle that has an
1.
unobstructed area of 3 inches by 3 inches around the antenna.
Attach the rubber cover/tail to the antenna, as shown in Figure 9, and press the
2.
antenna cable into the rubber cover/tail. The rubber cover/tail will help to position
the antenna the correct distance from the edge of the roof or trunk lid.
Clean the surface area of the vehicle where you will be installing the antenna with
3.
the alcohol prep pad.
Peel the protective material from the adhesive strips (Figure 9) and press the
4.
rubber cover/tail firmly into place on the vehicle (Figure 10).
[ Inst all atio n ]
18
Rubber Cover/Tail
Protective Material
Adhesive Strips
Strain Relief
Antenna Cable
Double check that the location of the antenna and rubber cover/tail are correct,
Figur e 9Figur e 9
Figur e 10Figur e 10
5.
and continue to press firmly down on rubber cover/tail for another 30 seconds.
At room temperature (68 degrees), maximum adhesion usually occurs within 72
hours. During this period, avoid car washes and other contact with the antenna
and rubber antenna cable cover/tail.
[ Inst all atio n ]
19
Ante nna Ca ble Ro uting
1. Fe ed Cable Un der
Rubber Molding
A round Windo w
4. Rou te Cable fr om Trunk
Un der Interio r Trim, int o
Ca bin and Tow ards Front
of Vehicle
6. Br ing Cable O ut To
D ocking Stat ion
Locati on and Conn ect
t o the Docki ng Station
5. Bri ng Cabe out from
Tr im and Rout e Under
Ca rpet to Das hboard
or Console
2. Rou te Cable Ou t of
Wi ndow Moldin g and
In to Weathers tripping
Ar ound Trunk Opening
3. Rou te Cable Al ong
Tr unk Wall an d Into
Ca bin
Figur e 11Figur e 11
When you have successfully mounted the antenna on the vehicle, you can begin the
cable routing portion of the installation. Separate antenna cable routing procedures
are provided for each type of vehicle:
Seda n/Coupe on page 23
•
Pick up Truck on page 23
•
SUV/ Mini-Van on page 23
•
Conv ertible on page 23
•
Seda n/Coup e Ante nna Cable R outing Proce dure
Figure 11 shows how the antenna cable can be routed from the antenna to the dock
in a sedan/coupe. The exact routing of the antenna cable may vary depending upon
where you have installed the dock in your vehicle. Avoid side airbag locations on back
pillars and above the doors. (Airbag locations are marked with “SRS” logos.)
20
[ Inst all atio n ]
1. Rou te Cable
Un der Rubber
Mo lding Aroun d
Wi ndshield
2. Con tinue Tucki ng Cable
Un der Molding To
Bo ttom of Win dshield
3. Rou te Cable Ou t of Moldin g
an d Into Weat herstrippin g
Ar ound Door O pening.
Co ntinue to B ottom of
Do or Opening.
4. Bri ng Cable ou t from
We atherstripp ing and
Ro ute Under C arpet.
5. Bri ng Cable Ou t To
Do cking Stati on
Locati on and Conn ect
to the Dockin g Station
Figur e 12Figur e 12
Pick up Tru ck Ant enna Cable Routin g Proc edure
Figure 12 shows how the antenna cable should be routed from the antenna to the
dock in a pickup truck. The exact routing of the antenna cable may vary depending
upon where you have installed the dock in your vehicle. Avoid side airbag locations on
back pillars and above the doors. (Airbag locations are marked with “SRS” logos.)
[ Inst all atio n ]
21
SUV/ Mini-V an Ant enna Cable Routin g Proc edure
1. Fe ed Cable U nder
Rubber Seal Arou nd
Hatch Opening
3. Ro ute Cable
Under Carpet
to Das hboard
4. Br ing Cable Out To
S IRIUS
Radio
Locati on
2. Rou te Cable U nder
In terior Tri m, into
Ca bin and To wards
Fr ont of Veh icle
Figur e 13Figur e 13
Figure 13 shows how the antenna cable should be routed from the antenna to the
dock in an SUV or a Mini-Van. The exact routing of the antenna cable may vary
depending upon where you have installed the dock in your vehicle. Avoid side airbag
locations on back pillars and above the doors. (Airbag locations are marked with
“SRS” logos.)
22
[ Inst all atio n ]
6. Br ing Cable O ut To
D ocking Stat ion
Locati on and Conn ect
t o the Docki ng Station
1. Bri ng Cable fr om
An tenna Into Inside
of Trunk Lid
2. Tap e Cable Alo ng
In side of Lid to
Hi nge Strut
4. Rou te Cable fr om Trunk
Un der Interio r Trim, int o
Ca bin and Tow ards Front
of Vehicle
5. Bri ng Cable ou t from
Tr im and Rout e Under
Ca rpet to Das hboard
or Console.
3. Tie Cable to H inge Strut, Allowing
Sl ack for Lid to Open an d Close.
Ro ute Cable I nto Cabin
Th rough Exist ing Wire
Ch annel.
Figur e 14Figur e 14
Conv ertibl e Ante nna Cable R outing Proce dure
Figure 14 shows how the antenna cable should be routed from the antenna to the
dock in a convertible. The exact routing of the antenna cable may vary depending upon
where you have installed the dock in your vehicle. Avoid side airbag locations on back
pillars and above the doors. (Airbag locations are marked with “SRS” logos.)
[ Inst all atio n ]
23
o
p
tio
n
s
display
b
a
c
k
h
o
m
e
+
Figur e 15Figur e 15
Operation
Before you can listen to the SIRIUS service, you need to subscribe to the Sirius
Satellite Radio service if you have not done so already. Please be sure to follow the
activation instructions for your specific Sirius radio as well as your headunit and/or
SiriusConnect interface adapter instructions.
Place your SIRIUS radio into the dock (Figure 15), aligning the tabs at the edges of
the radio adapter with the groves in your SIRIUS radio. Gently push the radio down
until it is fully seated in the dock. (Your radio may differ from the radio shown).
To remove the radio from the dock, press the release button (Figure 15) while pulling
the radio out of the dock.
[ Oper ati on ]
24
For operating instructions consult the owners manual of your headunit. Not all features
Locking Screw Hole
Locking Screw (C)
Bottom View of Dock
Figur e 16Figur e 16
of the Sirius radio (Dock & Play or Portable) may be accessible. The features will be
determined by the controlling headunit capability.
When your SIRIUS radio is connected via the SCVDOC1 SiriusConnect Vehicle
Docking Kit to your headunit, the buttons and controls of the SIRIUS radio will be
disabled, and a SiriusConnect message or logo will be displayed.
If you will not be removing the SIRIUS radio from the dock and want to lock the radio
in the dock so it cannot be removed, insert the locking screw C (shown on page 8) in
the locking screw hole in the bottom of the dock. (Figure 16)
[ Oper ati on ]
25
Specifications
Power Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-16 VDC, 1A
Operation Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . -5° to +40° C (23° to 104° F)
Signal-to-noise (S/N) (with radio connected) . . . . . . . . . . . . . . . . . . . . . . . . . . . . >73d B
Output Level (with radio connected) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.0v RMS
Antenna Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Low Profile Magnetic
Antenna Cable Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21’ (single micro-ca ble)
Antenna Connector Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .SMB
Data Interface . . . . . . . . . . . . . . . . 8-PIN DIN Control Port (audio, power, serial control)
SiriusConnect 8-PIN DIN Cable Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.5m
Dock Dimensions (Height x Width x Depth) . . . . . . . . . . . . . . . . 48mm x 55mm x 49mm
Radio Adapter 1 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 32.5m m x 55mm x 13.5m m
Radio Adapter 2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 33mm x 118mm x 12.5mm
Radio Adapter 3 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . 33.5m m x 55mm x 18.5m m
Radio Adapter 4 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . 33.5mm x 55mm x 24mm
[ Spec ifi cati ons ]
26
siriu s .com
SIRIUS Satellite Radio Inc.
1221 Avenue of the Americas
New York, NY 10020
800.869. 5590
SCVDOC1 (SCVDOC1021208a)
OO.ABCD1.003
Loading...