Sirius Satellite Radio KS-SRA100 User Manual

SIRIUS SATELLITE RADIO INTERFACE

INTERFAZ DE RADIO POR SATÉLITE SIRIUS
INTERFACE RADIO SATELLITE SIRIUS

KS-SRA100

Installation/Connection Manual
Manual de instalación/conexión
Manual d'installation/raccordement

FRANÇAIS ESPAÑOL ENGLISH

For customer Use:

Enter below the Model
No. and Serial No. which
are located on the top or
bottom of the cabinet.
Retain this information
for future reference.

Model No.
Serial No.

49.U TAJ V. 001

C over_N X500 0.indd 4 7/12/06 4: 36: 27 pm

WARNING

This symbol means important
instructions. Failure to heed them can
result in serious injury or death. DO

NOT OPERATE ANY FUNCTION
THAT TAKES YOUR ATTENTION
AWAY FROM SAFELY DRIVING
YOUR VEHICLE.

Any function that requires your
prolonged attention should only be
performed after coming to a complete
stop. Always stop the vehicle in a safe
location before performing these
functions. Failure to do so may result in
an accident.

DO NOT OPEN, DISASSEMBLE OR
ALTER THE UNIT IN ANY WAY.
Doing so may result in fire, electric
shock or product damage.

DO NOT INSERT ANY OBJECTS
INTO THE UNIT. Doing so may result
in fire, electric shock or product
damage.

USE THE CORRECT AMPERE
RATING WHEN REPLACING FUSE.
Failure to do so may result in fire,
electric shock or product damage.

MAKE THE CORRECT
CONNECTIONS. Failure to make
proper connections may result in fire or
product damage.

DO NOT SPLICE INTO A
ELECTRICAL CABLES. Never cut
away cable insulation to supply power
to other equipment. Doing so will
exceed the current carrying capacity of
the wire and result in fire or electric
shock.

DO NOT INSTALL IN LOCATIONS
THAT MIGHT HINDER VEHICLE
OPERATION. Doing so may obstruct
vision or hamper movement which can
result in a serious accident.

DO NOT INSTALL THE UNIT TO HIGH
LEVELS OF HUMIDITY, MOISTURE
OR DUST. Doing so can result in electric
shock or product failure.

FCC Warning: This equipment may
generate or use radio frequency energy.
Changes or modifications to this
equipment may cause harmful
interference unless the modifications
are expressly approved in this User
Guide. The user could lose the
authority to operate this equipment if
an unauthorized change or
modification is made.

Note: This equipment has been tested
and found to comply with Part 15 of the
FCC Rules. These rules are designed to
provide reasonable protection against
harmful interference. This equipment
may cause harmful interference to radio
communications if it is not installed and
used in accordance with these
instructions. However, there is no
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one of more of the
following measures:

• Relocate the receiving antenna.

• Consult the dealer or an experienced
technician for help.

1

CAUTION

This symbol means important

instructions. Failure to heed them

can result in injury or material

property damage.

HALT USE IMMEDIATELY IF A

PROBLEM APPEARS. Failure to do so

may cause personal injury or damage

to the product. Return the unit to your

authorized retailer or nearest service

center for repairing.

INSTALL THE WIRING SO THAT IT IS

NOT CRIMPED OR PINCHED BY

SCREWS OR SHARP METAL EDGES.

Route the cables away from moving

parts or sharp pointed edges. This will

USE THE SPECIFIED ACCESSORY

PARTS AND INSTALL THE PRODUCT

SECURELY. Be sure to use only the

specified accessory parts. Use of

non-specified parts may damage this

unit internally or may not securely

install the unit in place. This may cause

parts to become loose, resulting in

hazards or product failure.

USE CAUTION IF YOU NEED TO

DISCONNECT THE BATTERY

TERMINAL. Please consult the

vehicle’s owner’s manual or a service

technician prior to removing the battery

positive or ground connection, as it

may cause damage to the vehicle’s

prevent crimping and damage to the

wiring. If the wiring must pass through

a metal hole, be sure to use a rubber

grommet to prevent the wire’s

insulation from being cut by the metal

edge of the hole.

Caution:

Changes or modifications not approved
by JVC could void the user’s authority
to operate the equipment.

electrical system or require

reprogramming of the vehicle’s

computer-controlled devices.

2

Table of Contents

Package Contents ............................................3

Wiring and Cable Connections .........................4

System Connection Examples..........................5

Specifications....................................................6

Package Contents

SIRIUS SATELLITE RADIO INTERFACE

2.5-Meter Bus Cable

Power Cord

3

A

Wiring and Cable Connections

From the SIRIUS Tuner

To the Receiver

B

C

D

Tuner Input(SIRIUS)

J-BUS Output Connector(TO RECEIVER)

J-BUS Input Connector(TO CHANGER)

Power Connector(POWER)

4

System Connection Examples

System1: JVC J-BUS Headunit, KS-SRA100 and SIRIUSConnect

Vehicle Tuner

System2: JVC J-BUS Headunit, KS-SRA100 and SIRIUSConnect

Vehicle Dock & Portable Tuner

5