Sirius Satellite Radio INV2 User Manual

InV2

User Guide

InV2

Satellite Radio

Congratulations on the Purchase of your new SIRIUS InV2 Satellite Radio

Your new SIRIUS InV2 Satellite Radio lets you enjoy SIRIUS® Satellite Radio’s digital entertainment in any vehicle.

Use this manual to familiarize yourself with all of your InV2’s features and capabilities. For the latest information about this and other SIRIUS products and accessories, visit http://www.sirius.com.

Table of Contents

TABLE OF CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 –

WARNING AND SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . 6

FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Canadian Compliance . . . . . . . . . . . . . . . . . . . . . . . . . . 7

General Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

Warnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

COPYRIGHTS & TRADEMARKS . . . . . . . . . . . . . . . . . . . . . 10

PACKAGE CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . 11

INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Attaching the Adhesive Dash Mount . . . . . . . . . . . . . . . . . . . . . 15

Installing the Magnetic Antenna . . . . . . . . . . . . . . . . . . . . . . 16

Docking Your SIRIUS InV2 . . . . . . . . . . . . . . . . . . . . . . . . 32

Connecting the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . 33

Connecting the Cigarette Lighter Adapter . . . . . . . . . . . . . . . . . . 33

Cable Separation and Routing . . . . . . . . . . . . . . . . . . . . . . . 34

Connecting the SIRIUS InV2 to Your Vehicle’s Audio System . . . . . . . . . . 36

Direct Wired Audio Connection . . . . . . . . . . . . . . . . . . . . . 36

Direct FM Audio Connection . . . . . . . . . . . . . . . . . . . . . . 37

Cassette Adapter . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Wireless Audio Connection . . . . . . . . . . . . . . . . . . . . . . . 39

Wireless Audio Connection Using the FM Extender Antenna . . . . . . . . . . 41

Subscribing to the SIRIUS Service . . . . . . . . . . . . . . . . . . . . . 59

CONTROLS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

SIRIUS InV2 Front Panel and Connections . . . . . . . . . . . . . . . . . . 60

OPERATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62

Display Screen Information . . . . . . . . . . . . . . . . . . . . . . . . 62

[ Table of Contents ]

Changing Channels . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

Channel Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63

FM Presets Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64

MENU OPTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65

SIRIUS ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

FM Presets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67

FM Transmit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68

Brightness and Contrast . . . . . . . . . . . . . . . . . . . . . . . . . 69

Audio Level . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69

Tones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70

Channel Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Edit Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72

Signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Factory Set . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . 76

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77

SIRIUS ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

[ Table of Contents ]

Warning and Safety Information

FCC Information

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

This device may not cause harmful interference, and

1. This device must accept any interference received, including interference that may

2. cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

1. Increase the separation between the equipment and the receiver.

2. Connect the equipment into an outlet on a circuit different from that to

3. which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

[ Warning and Safety Information ]

WARNING

Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

Canadian Compliance

This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

General Precautions

Liquid Crystal Precautions

If the LCD screen on the radio is damaged, do not to touch the liquid crystal fluid. If any of the following situations happen, take the action indicated:

If the liquid crystal fluid comes in contact with your skin, wipe the skin area with a cloth and then wash the skin thoroughly with soap and running water.

If the liquid crystal fluid gets into your eye, flush the eye with clean water for at least 15 minutes. Seek medical care.

If the liquid crystal fluid is ingested, flush your mouth thoroughly with water. Drink large quantities of water and induce vomiting. Seek medical care.

Safety Precautions

Be sure to observe the following warnings. Failure to follow these safety instructions and warnings may result in a serious accident.

•

Do not operate your InV2 in a way that might divert your attention from driving safely. As a driver, you alone are responsible for safely operating your vehicle in accordance with traffic safety laws at all times.

[ Warning and Safety Information ]

•

Do not install the unit where it may obstruct your view through the windshield, or of your vehicle’s indicator displays.

•

Do not install the unit where it may hinder the function of safety devices such as an airbag. Doing so may prevent the airbag from functioning properly in the event of an accident.

•

Be sure the unit is installed as described in the installation instructions which accompany each accessory kit. SIRIUS Satellite Radio is not responsible for issues arising from installations which were not installed according to the instructions.

•

To avoid short circuits, do not open the unit, and never put or leave any metallic objects (coins, tools, etc.) inside the unit.

•

If the unit emits smoke or unusual odors, turn the power off immediately, and disconnect the unit from any power source.

•

Do not drop the unit or subject it to strong shocks.

•

If the unit doesn’t seem to be working properly, turn the unit off, wait 10 seconds and then turn it on again.

•

The installation and use suggestions contained in this manual are subject to any restrictions or limitations that may be imposed by applicable law. The purchaser should check applicable law for any restrictions or limitations before installing and/or operating this unit.

Do not install the FM Extender Antenna where it will hinder or block your view. In

• some states it may be illegal to mount it on the windshield of your vehicle. Check applicable law for any restrictions or limitations before installing the FM Extender Antenna on your windshield.

Do not install the FM Extender Antenna where it may hinder the function of safety

• devices such as an airbag. Doing so may prevent the airbag from functioning properly in the event of an accident.

[ Warning and Safety Information ]

Warnings

Notice To Drivers In California and Minnesota

State law prohibits drivers in California and Minnesota from using suction mounts on their windshields while operating motor vehicles. Other dashboard or friction mounting options should be used. SIRIUS does not take any responsibility for any fines, penalties, or damages that may be incurred as a result of disregarding this notice. (See California Vehicle Code Section 26708(a); Minnesota Statutes 2005, Section 169.71)

Operating Temperature

The InV2 is designed to operate between -20° to +85° C (-4° to +185° F). Avoid leaving the radio in a vehicle or elsewhere where the temperature may fall outside this range. Extreme temperatures or extreme temperature fluctuations can degrade the performance of the LCD display screen, and possibly damage it.

Cleaning and Maintenance

If the radio or accessories become dirty, turn the power off and wipe it clean with a soft cloth. Do not use hard cloths, strong cleaning fluids, paint thinner, alcohol, or other volatile solvents to clean. These may cause damage to the radio.

Cigarette Lighter Adapter

The radio cannot be powered directly from a vehicle’s 12VDC power system. It must be powered from the vehicle’s cigarette lighter or similar power port using the included Cigarette Lighter Adapter or an equivalent DC power adapter (see your local electronics dealer). Connecting the radio directly to the vehicle’s 12VDC power system may result in damage to the SIRIUS radio.

[ Warning and Safety Information ]

Copyrights & Trademarks

tion of eCos requires that the eCos source code be made available to SIRIUS Satellite Radio customers. The eCos License and eCos source code are available to the public at http://www.sirius.com/ecoslicense.

SIRIUS Satellite Radio reserves all rights to all radio software not covered under the eCos license. This includes all portions of radio software that were not distributed to SIRIUS as part of the eCos operating system.

Hardware, subscription and activation fee required. For full Terms & Conditions, visit http://sirius.com. Prices and programming are subject to change. Not available in HI and AK. Equipment and subscription sold separately. Installation required with some equipment.

[ Copyrights & Trademarks ]

Package Contents

The following items are included with your purchase of the SIRIUS InV2 Satellite Radio:

SIRIUS InV2 Radio

Adhesive Dash Mount

Cigarette Lighter

Adapter

[ Package Contents ]

Magnetic

Antenna

Cover/Tail

Alcohol

Swab

FM Extender Antenna Suction

Cups (2)

Self Adhesive

Cable Guides (3)

Unpack your SIRIUS InV2 radio carefully and make sure that everything shown is present. If anything is missing or damaged, or if your the radio fails to operate, notify your dealer immediately. We recommend that you retain the original carton and packing materials in case you need to ship your radio in the future.

[ Package Contents ]

Installation

SIRIUS suggests that you have your InV2 professionally-installed in your vehicle. Professional installation provides an experienced technician to install this product in your vehicle, advice for selecting a suitable mounting location for the Dash Mount, installation of the antenna, and proper routing of all the necessary wires and cables. If the locations of your SIRIUS radio and your vehicle’s FM antenna make the performance the SIRIUS radio’s built-in FM transmitter within your vehicle poor, a professional installer will have the necessary accessories to install an optional FM Direct Adapter or audio cable to connect your InV2’s audio output directly to your vehicle’s audio system. Ask your SIRIUS retailer if they provide professional installation services, or can recommend a professional installation service.

[ Installation ]

Location

When installing the Dash Mount in your vehicle, choose a location in your vehicle where it will not block your vision, interfere with the vehicle controls, or obstruct the air bag. The location should be easily accessible and provide good visibility of the display, and should not be located where it will be in direct sunlight which will affect the visibility of the display screen.

Figure 1 shows two examples of the InV2 mounted on a vehicle’s dashboard. A is left of the steering wheel; B is right of the wheel.

[ Installation ]

Figure 1

Attaching the Adhesive Dash Mount

Select the mounting position carefully before adhering the mount to your vehicle. Once the mount has been adhered to a surface, it will not be possible to remove it and adhere it again.

Once you’ve selected a mounting location, clean the mounting surface area in the vehicle with the provided alcohol swab. Peel the protective material off the adhesive on the foot and press the foot firmly against the vehicle surface (see Figure 2).

1. Clean Mounting Area with Swab

Allow the adhesive to adhere for a minimum of 2-4 hours before using the mount. The best adhesion occurs after 24 hours.

2. Peel Cover From Adhesive Foot

Figure 2

3. Press Adhesive Foot Firmly On Mounting Area

[ Installation ]

Installing the Magnetic Antenna

Caution

Because adhesive is used in the installation of the Rubber Antenna Cover/Tail, we recommend that you install the antenna at or above room temperature (68° F). The adhesive on the Rubber Cover/Tail may not adhere properly to the vehicle roof at temperatures lower than this. Warmer temperatures will also make it easier to route of the antenna cable through the rubber molding around the windows and in other areas in the vehicle. Maximum adhesion usually occurs within 72 hours at room temperature, so you should avoid car washes as well as other contact with the antenna and Rubber Cover/Tail during this 72 hour period.

Warning

Be sure not to cut, damage, or puncture the external jacket of the antenna cable during the installation procedure. Damage to the antenna cable can degrade the SIRIUS signal or make it unavailable, and can also cause water to intrude via the cable into the antenna causing the antenna to fail.

Do not lengthen or shorten the antenna cable by cutting it. Doing so will cause the antenna to not function properly.

Installation

Installing the magnetic antenna consists of two steps:

Mounting the magnetic antenna and Rubber Antenna Cover/Tail on the vehicle

• Routing the antenna cable through the vehicle to the Vehicle Dock

•

[ Installation ]

ANTENNA MOUNTING

The SIRIUS Magnetic Mount Vehicle Antenna has a strong magnetic mount designed to hold it in place during normal driving conditions (highway/city). This also makes the antenna easy to remove for transferring it to other vehicles.

Figure 3 shows the optimal mounting location for the antenna on several types of vehicles. These mounting positions should be observed when installing the antenna:

Sedan/Coupe Pickup Truck SUV/Mini-Van

Convertible

Figure 3

Sedan/Coupe/SUV/Mini-Van: Install the antenna at the rear center of the roof,

•

near the rear window.

Pickup Truck: Install the antenna at the front center of the roof, near the wind-

•

shield.

Convertible: Install the antenna at the front center of the trunk lid, near the rear

•

window.

[ Installation ]

The SIRIUS antenna needs to have an unobstructed area of 3 inches by 3 inches around it. It is important to mount the antenna where no obstructions will block the an-

tenna from receiving the SIRIUS signal. Objects which can obstruct the antenna could be a roof rack, a sunroof, a roof-mounted cargo container, another antenna, etc. If your vehicle has a potential obstruction, be sure that the SIRIUS antenna is mounted at least 3 inches away from it (but no closer than 3 inches from the roof edge, or trunk lid in the case of a convertible).

Note: Read the DO and DO NOT installation tips beginning on page 28 for additional antenna installation information.

Follow this procedure to mount the antenna:

Select an appropriate mounting position for your type of vehicle that has an unobstructed area of 3 inches by 3 inches around the antenna.

Attach the Rubber Cover/Tail to the antenna, as shown in Figure 4, and press the antenna cable into the rubber cover/tail. The Rubber Cover/Tail will help to position the antenna the correct distance from the edge of the roof or trunk lid.

Protective

Strips

Cable

Magnetic Antenna

(Upside-Down)

Figure 4

Clean the surface area of the vehicle where you will be installing the antenna with

Strain Relief

Rubber Antenna Cover/Tail

the alcohol prep pad.

[ Installation ]

Peel the protective material from the adhesive strips (see Figure 4, on page 18) and press the rubber Cover/Tail firmly into place on the vehicle.

Double check that the location of the antenna and rubber cover/tail are correct, and continue to press firmly down on the Rubber Cover/Tail for another 30 seconds. At room temperature (68° F), maximum adhesion usually occurs within 72 hours. During this period, avoid car washes and other contact with the antenna and the Rubber Antenna Cover/Tail.

CABLE ROUTING

After you have mounted the antenna you can route the antenna cable to the SIRIUS Vehicle Dock. Separate antenna cable routing procedures are provided for each type of vehicle: Sedan/Coupe, Pickup Truck, SUV/Mini-Van and Convertible.

Note that additional breakout illustrations for each step of the antenna cable routing procedures can be found on the SIRIUS website at http://www.sirius.com. Click on the Install/Activate link and then follow the link for the Car Installation Tips.

[ Installation ]

Sedan /Coupe Antenna Cable Routing Procedure

Figure 5 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in a sedan/coupe.

2. Route Cable Out of Window Molding and Into Weatherstripping Around Trunk Opening

3. Route Cable Along Trunk Wall and Into Cabin

[ Installation ]

1. Feed Cable Under Rubber Molding

Around Window

4. Route Cable from Trunk Under Interior Trim, into Cabin and Towards Front of Vehicle

Figure 5

ANTENNA

6. Bring Cable Out To SIRIUS

Receiver

Location

5. Bring Cable out from Trim and Route Under Carpet to Dashboard or Console.

Follow these detailed cable installation instructions:

Feed the cable from the antenna underneath the rubber molding around the rear window. Use a plastic putty knife or similar object to lift the rubber molding around the rear window and tuck the antenna cable underneath the molding. Route the antenna cable around and down the window to the lowest point. If your rear window does not have rubber molding, SIRIUS recommends consulting with a professional installer.

Route the antenna cable out of the window molding and into the rubber weather stripping around the trunk opening. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. To avoid sharp bends in the cable, run the cable inside of the weather stripping for a few inches, then remove the cable from the weather stripping inside of the trunk. Keep the cable away from hinges, gears, etc., that could damage it.

Route the cable out from the rubber weather stripping and along the trunk wall. Continue routing the cable into the cabin through a conduit or along an existing wiring harness.

Route the cable through the main cabin area under the interior trim, towards the front of the vehicle. Use the plastic putty knife to lift the plastic trim just enough to tuck the cable under underneath. Avoid side airbag locations on back pillars and above the doors. (Airbag locations are marked with “SRS” logos.) Be careful not to crimp or cut the cable. Bring the cable out from the trim near the firewall and route it under the carpet

5. toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties. Bring the end of the cable out at the SIRIUS Vehicle Dock location. Leave yourself

6. enough cable so you can easily connect it to the antenna connector on the Vehicle Dock.

[ Installation ]

Pickup Truck Antenna Cable Routing Procedure

Figure 6 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in a pickup truck.

ANTENNA

1. Route Cable Under Rubber Molding Around Windshield

5. Bring Cable Out to SIRIUS Receiver Location

3. Route Cable Out of Molding and Into Weatherstripping Around Door Opening. Continue to Bottom of Door Opening.

[ Installation ]

2. Continue Tucking Cable Under Molding To Bottom of Windshield

4. Bring Cable out from Weatherstripping and Route Under Carpet

Figure 6

Follow these detailed cable installation instructions:

Use a plastic putty knife or similar tool to lift the rubber molding around the windshield and tuck the antenna cable underneath it.

Continue tucking the cable underneath the windshield molding around the windshield to the lowest corner.

At the lowest corner of the windshield, route the cable out of the windshield molding and into the rubber weather stripping around the door opening. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. Run the cable inside of the weather stripping to the bottom of the door opening.

Pull the cable out of the weather stripping at the bottom of the door opening and route it under the carpet toward the dashboard. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties. Bring the end of the cable out at the SIRIUS Vehicle Dock location. Leave yourself

5. enough cable so you can easily connect it to the antenna connector on the Vehicle Dock.

[ Installation ]

SUV/ Mini-Van Antenna Cable Routing Procedure

Figure 7 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in an SUV or a Mini-Van.

1. Feed Cable Under Rubber Seal Around Hatch Opening

[ Installation ]

ANTENNA

Figure 7

4. Bring Cable Out To SIRIUS

Receiver

Location

3. Route Cable

2. Route Cable Under Interior Trim, into Cabin and Towards Front of Vehicle

Under Carpet to Dashboard

Follow these detailed cable installation instructions:

Feed the antenna cable underneath the rubber weather stripping of the rear tailgate window/door and route the cable along the rear hatch. Lift the weather stripping from the opening and tuck the cable inside it, then replace the weather stripping. Pull the cable out from weather stripping and route it into the cabin under the interior trim. Avoid hinges or gears that could crimp or cut the cable.

Route the cable through the SUV’s main cabin area under the interior trim, towards the front of the vehicle. Use a plastic putty knife to lift the plastic trim just enough to tuck the cable under underneath. Avoid side airbag locations on back pillars and above the doors. (Airbag locations are marked with “SRS” logos.) Be careful not to crimp or cut the cable.

Bring the cable out from the trim near the firewall and route it under the carpet toward the dashboard or console. Coil any excess cable in a hidden location, such as under the carpet, keeping it away from any vehicle pedals or controls. Secure the excess cable with wire ties.

Bring the end of the cable out at the SIRIUS Vehicle Dock location. Leave yourself enough cable so you can easily connect it to the antenna connector on the Vehicle Dock.

[ Installation ]

Convertible Antenna Cable Routing Procedure

Figure 8 shows how the antenna cable should be routed from the antenna to your SIRIUS radio in a convertible.

6. Bring Cable Out To SIRIUS

Receiver

Location

1. Bring Cable from Antenna Into Inside of Trunk Lid

5. Bring Cable out from Trim and Route Under Carpet to Dashboard or Console.

ANTENNA

4. Route Cable from Trunk Under Interior Trim, into Cabin and Towards Front of Vehicle

2. Tape Cable Along

Inside of Lid to

Hinge Strut

[ Installation ]

3. Tie Cable to Hinge Strut, Allowing Slack for Lid to Open and Close. Route Cable Into Cabin Through Existing Wire Channel.

Figure 8

+ 58 hidden pages