Sirius SDD2 EMTC 1180 WH Specifications Sheet

SDD2 EMTC 1180 WH

118CM DOWNDRAFT HOOD WITH WHITE GLASS PANEL

SDD2 EMTC 1180 WH

Features and Benefits:

DOWNDRAFT DESIGN

HIDDEN ALIMINIUM FILTERS

INDUCTION COUNTDOWN CONTROL

FULL ELECTRONIC TOUCH CONTROL

SAFETY SHUTDOWN

MADE IN ITALY– GERMAN MADE FILTER

Perfect for island installation offering an alternative to bulky island hoods, Modern aes­thetic, retractable for unrestricted vision, installed in bench making it versatile for impeded
installation situations such as multiple storey builds and obstructing window locations

Aesthetically pleasing, Dishwasher safe, Easy to remove, Effective in the removal of odours,
Designed to trap grease, Long lasting

10 minute auto function used at the end of cooking to reduce condensation build up com­mon to induction cooking.

Sleek, easy to clean touch controls in toughened glass

Stops unit being damaged due to miss installed filters from obstructing closing mechanism

Units are designed specifically for the Australian market and manufactured in Italy by dedi­cated boutique specialist manufacturer

WARRANTY

40-44 Mark Anthony Drive, Dandenong South VIC 3175 Ph: 1300 762 219 Fax: [phone] Website: www.arisit.com

3 Years Warranty + 3 Years when Sirius ducting is used. Sirius strongly recommend to use
the correct ducting as to not void warranty and to achieve the ideal result.

Distributed by Arisit Pty Ltd

SDD2 EMTC 1180 WH

118CM DOWNDRAFT HOOD WITH WHITE GLASS PANEL

WARNING!

Do not install below
over-head cupboards as
access if required in the
case of a service call. The
unit must be accessible to
remove

MODEL

CONTROL PANEL

MOTOR

EXTRACTION

DUCTING DIAMETER

LIGHTS

FILTER

ELECTRICAL REQUIREMENT

PRODUCT DIMENSIONS

WARRANTY

Technical Specifications:

SDD2 EMTC 1180 WH

TOUCH CONTROL

SEM 7 SEM 8 SEM 10

2300m/3h 1650m/3h

200mm

N/A

ALIMINIUM MESH

10A

1180 x 116 x 728 + 312

3 YEARS + 3 YEARS WHEN SIRIUS DUCTING IS USED

WARNING: technical specifications and product sizes can be varied by the manufacturer, without notice. Cut outs for appliances should only be by physical product measure-

ments. The above information is indicative only.

Distributed by Arisit Pty Ltd

40-44 Mark Anthony Drive, Dandenong South VIC 3175 Ph: 1300 762 219 Fax: [phone] Website: www.arisit.com