Introduction
Take Up Lever (D)
Thread Spindle (C)
Thread Spool (E)
Bobbin Holder (V)
Bobbin Winder Spindle (T)
Tension Screw (Q)
Needle Clamp Screw (O)
Needle Clamp (P)
Needle (R)
Presser Foot (F)
Bobbin compartment (I)
Bobbin Holder (J)
Bobbin Winder Handler (W)
Bobbin (S)
Reverse Button
Handwheel (K)
Bobbin Spindle (U)
Speed Button (L)
ON/OFF Switch (A)
Light Button
Stitch Length
Adjustment Button
Foot Pedal Jack (M)
AC/DC Jack (DC 6V)
Presser Foot Lever (G)
Battery Compartment (B)
on underside of machine
Bobbin Cover
Release Button (H)
2
Parts & Accessories
AC/DC Adapter (DC 6V)
Accessories
Needle Threader, Tape measure, Seam ripper, Needles, Thimble, Thread, Buttons,
Pins, Scissors, Bobbins, Snaps
Foot Pedal Jack (M)
3
Battery Installation
Battery Installation
1. Caution: Make certain the POWER SWITCH is in the off position before inserting the
batteries.
2. Insert (4)AA batteries in the battery slot compartment in the bottom of the machine. Be
certain the batteries are in the correct polarities as marked on the machine. Then replace
the battery compartment cover.
4