Singer 6038 User Manual

Download

Specifications and Main Features

Model: this sewing machine is known as SINGER 6038.
Type of: this machine is a 'Domestic' one.
Functions include -

-left straight stitching

-Straight center stitching

-right straight stitching

-zigzag stitching of 1.5, 3, 4.5 and 6 mm

-pattern stitching of applique, monogram and satin stitch

button attachment and sew-on

-single step button hole sewing machine

-darning and patch working

-appliques, blocks and ornamental

-duct tape sewing

-inserting zips

-double sew straight stitch and zigzag stitch sewing

-decorator style manual stitching

-numerous other stitches

Safety Verifications: The machine complies with European Union requirements for constructional electric safety as well as electromagnetic compatibility CE mark certificate.

Frequently Asked Questions

Q: What type of power requirement does the SINGER 6038 take.

A: This sewing machine SINGER 6038 utilizes electric power with a rate of between 110V-120V and or 220V-240V.

Q: Which method am I suppose to use to replace the presser foot of the SINGER 6038?

A: You begin by first switching the machine off, then lifting the presser foot before pushing the lever which allows you to snap out the presser foot. You try and place the new presser foot secretively under the shank while pushing the presser down to fasten the foot.

Q: What advice do you give me if my stitches are different?

A: Start by assessing whether the thread tension settings were set too high or low during sewing and make a few test stitches on a piece of fabric to make sure the tension is not too tight. From there make the adjustments as per the manual guidelines.

Q: Does it mean i can use any sort of thread with SINGER 6038?

A: It is advisable to use Original SINGER needles and compatible threads. Do not use waterproof or metallized materials as these will deteriorate the quality of sewing.

Q: What should I do while cleaning and maintaining of SINGER 6038?

A: For regular maintenance procedures, you need to take removed needle plate, remove the dust out of the machine and lubricate it as stated in the manual. Always turn off the electricity when doing maintenance activity.