SINGER 147-51 User Manual

Form 18G95

October, 1933

PRINTSD IN U. S. A.

LIST

OF

PARTS

MACHINES

Nos. 147-50 and 147-51

THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR OILING

These machines are equipped with an oiling
system which automatically delivers the proper
amount of oil to the principal bearings of the
machine.

Oil in a reservoir in the arm is picked up by
a scoop on the connecting rod, and lubricates
the various bearings inside the arm by splash.
A cup within the arm catches some of this oil,
and connecting pipes and wicks distribute it to
the principal bearings outside the arm.

In order that this svstem may operate, it is

absolutely necessary that the instructions be

observed to the letter.

Caution: Use only a good grade of medium
oil (Singer Cloth and Leather Oil). Do not use
a light oil such as Stainless Oil.

A machine new from the factory, or one that
has not been operated for some time, must be
serviced as specified in Form 18558. (Instructions
for Using and Adjusting Singer Sewing Machines
Nos. 147-50 and 147-51).

INDEX

I'ACE

AcrKHSOiiiKH

]!ki.t (iiiAni).................................................................................................... 30

Bench Stam)................................................................................................... 30

KooT BiKTEH Bahth...................................................................................... 31

Knee I.hter Bahtm........................................................................................ 31

Machine Base................................................................................................. 32

“ “ (111. Drain Jar

“ No. 1 !7-o0................................................................................... 7

“ “ 147-31....................................................................................... 1!)

Numerical Bisr of Barts.................................................................................. 3.3

Ohsoleti; Barts................................................................................................................. 31

ThRE.U) r.NWINHER..................................................................................... 33

................................................................................................

..............................................................

30

32

Genuine Singer Needles should be used

Company’s Trade Mark “SIMANCO.” I

in Singer Machines.

These Needles and their Containers

are marked with the

Needles in Containers marked

**For Singer Machines”

are not Singer made needles.

INSTRUCTIONS FOR ORDERING

In ordering fi'om tliis list, use ONLY the part NUMBER

in the FlllS'r column.

Tlie nuinher slam])eil on a Sewing Machine Part is in every

case the nuinher of the single part only.

Every combination of parts sent out a.s such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.

Each number always indicates the SAME PART in whatever

list it appears, or for whatever machine.

The letters after some of the numbers indicate the stylo of

finish only, as follows:

A—Hardened, Polished, Nickel Plated mid Buffed
B—Polished, Nickel Plated and Buffed
C—Hardened Only
D—Polished Only

E—Soft, Not Pohsheil
E—Hardened and Polished

H-^BIued

J—Nickel Plated Only

K—Hardened and Nickel Plated

L—Brass Plateil

M—Oxidizial

N—.Japanned, Dull

P—.Japanned, Bright

R—Merlized

T—Copper Plated

'r. A.—Hardened, I’olished, Copper and Nickel Plated

T. J.—Co|iper and Nickel Plated Only

T. Iv.—Hardened, Copper and Nickel Plated

T. M.— Copper Idatcd and Oxidized

T, L—Copper and Brass Plated

Z. B.—Polished, Nickel Plated, Buffed and Chromium Plated

Z. J.—Nickel and Chromium Plated

These letters MUST BE USED when they appear in the list;

and AFTER the number as in the list.

In this series;

The figures in the second column refer only to the plates,

illustrating the jiarts, and are NOT TO BE USED in ordering.

Parts marked with an asterisk (*) are furnished only when

repairs are made .at factor}'.

and Buffed

B.—Cop|)ci' and Nickel I’lafed and I’olished

U —Zinc Plated
V—Silver Plated

VV—I’olisheil and Nickel I'lated

V-.-Black Nickel I'lated Only

Z—Chromium Plated

1 to l.aOO and .50001 to .51500 are Screw Numbers
1501 to 1800 and 51,501 to 51800 are Nut Numbers
1801 to 2t)00 and 51801 to 52000 are Roller Numbers
2001 to 50000 ami 52001 and upward are nvmdjers of

Machine Parts

LIST OF PARTS COMPLETE

FOR

E9!i20,

MACHINE No. 147-50

FOR GENERAL WORK IN LIGHT WEIGHT FABRICS. ONE

NEEDLE, ONE LOOPER. SHORT NEEDLE BAR AND
LDOPER STROKE. THE LOOPER IS ARRANGED $0 THAT IT
MAY BE THROWN OUT OF POSITION FOR CONVENIENCE
IN THREADING. AN IMPROVED OILING SYSTEM AUTO

MATICALLY OILS ALL OF THE PRINCIPAL BEARINGS OF
THE MACHINE. BALANCE WHEEL N0.64259. DIAMETER
OF BELT GROOVE 2 INCHES. SPEED UP TO 4300.

Vl.ATK N.\MK

No.

*58127

t)S12,S
tlS 129 9917

20,50:i

111.5710

t)S;!,50

tiSlIiO 9922

.51548
1,‘i 129:1 “ Rock Shaft
i:ii29i

,\rm, upper and lower (solid) with 948n,

154(14, 5848:i, two 1540.5 and four

111 1022......................................................

9!I17

.\rni Bottom Cover...........................................

“ “ “ Gasket (cork)

!)i)22

9922

—

“ “ “ Screw....................................................

“ Oil Cup, for oiling .\rin Rock Shaft

Front Bearing

.Arm Oil Cup, for filling oil reservoir. . .

“ “ “ i:il29;i with I2:15k and

131295.........................................................

........................................

..............................................

“ “ Oil Pad (braided cotton)

.................................................

TAHTS FOR MA(;iHNE No, 117-51)

,NO.

I'l.ATD

1309c

20501

1310.56

681.33
68431

6813,5

13109.5

20.501
0916

9916
9916

“ “ “ Bii.sliing (back)

wilh .52015

.................................................

-Ann Rock iShafl Busliing (back) Ca|)

...................

“ 118133

Washer (filire).............................................

.52015 9922

•Ann Rock Shaft, Bushing (back; Oil Bail

(wick)..........................................................

4-ltic

20503

Ann Rock Shaft. Bushing (back) Set,

.Screw..........................................................

68136

9916

-Alin Rock Shaft Bushing (internieilialc)

68137

11813(1 with .520-15..................................

.52015 9922

Ann Rock Shaft Basiling (intcrniediatc)

Oil Bad (wick).............................................

123c 20.503

131072

9916

-Ann Rock Shaft Bushing (intcrinediate)

.Set Screw

...................................................

-Ann Rock Shaft ('rank, back (ball

bearing, solid) v\'ith two ,50083r

.500,83c

131295

127S38

511115
.521)15

20503

99111
9922

.Screw

“ “ “ “ “ ihn

“ “ “ I' langed Bushing (front)

Oil Bad (wick)

-\nn Rock .Shaft ('rank (back) Sei

.........................................................

-Ann Rock Sliafl Crank (front) wilhS5 ic

......................

............................................

1.53c 20.503 -Ann Rock .Shaft Flanged Bushing
(front) .Set Screw

I235F 20.503 Ann Rock Shaft Oil Bing .Screw

.......................................

........................

123(1.5 9922 “ “ “ Bad (braided cot

ton) for oiling Back Bearing

.......................

519(19 9922 .Ann Rock Shaft Oil Bad (braided cot

ton) foi' oiling Inlcrincdiate Hearing

*(liSI 10 20508 ,\nn Rolarj' .Shaft

-\iitk; When No. (18-110 is rc(|uircd for repaiis,

...................................................

the l-oojicr Di'iving Shaft and l'’eed Lifting

J-’ccen(l ie must, be l et nrned to ( he factory

to be adjusted to t lu“ new part.

(1,8111

------

-\rin Rotary Shaft (1.8110 with (llOi;,
.511.50, (181.59, (18170, (184,82 and

13101(1.......................................................

(18112

20.)2tl -Ann Rotary .Shaft Biishiiig (front)

7(1 Id

20,503 " “ ' " - •' Set

.Screw..........................................................

W'a.slK'r

................

...........

B.ARTS FOR MACHINE No. 147-50 9

NO. I'l-VrD N.\MK

68113 9917 Arm Rotary Shaft Bushing (inter

mediate)

(PSlll

------------

Arm Rotary Shaft Bushing (inter

mediate) 68443 with 41128

.........................

-11128 9922 -Arm Rotary Shaft Bushing (inter
mediate) Oil Bad (braided cotton). . .

422c 20503 Arm Rotary Shaft Bushing........(inter

mediate) Set Screw (long)

...........................

50081c 20,503 Arm Rotary Shaft Bushing (inter

mediate) Set Screw (short)

..........................

51-150 20,520 Arm Rotary Shaft Collar with two

12,58c..........................................................

12,58c 20,524 Ann Rotary Shaft Collar Set Screw

----------------

(18445 9017 “ “ “ Flanged Bushing... .

(1.8146

----------

“ “ “ “ “ 98445

with 42367

...................................................

42367 9922 -Arm Rotary Shaft Flanged Bushing Oil

Fad (braided cotton)

....................................

1.59n 20,503 Arm Rotary Shaft Flanged Bushing
.Screw

..........................................................

-12307 0922 Arm Rotary Shaft Front Bearing Oil
Pad, lower (braided cotton)

.........................

54218 9922 Arm Rotary Shaft Front Bearing Oil

Fad, u|)per (braided cotton)

.........................

57971 9922 .Arm Rotary Shaft Oil Pad (braided

cotton) for oiling Back Bearing

...................

50006 0022 Arm Rotary Shaft Oil Pad (braided

cotton) for oiling Intermediate Bear

ing................................................................

1-141) 20503 Ann Rotary Shaft Screw......................................

131270 2052(1 “ Side Cover (oil vent)
131278

------

.Ann Side Cover (oil vent) complete,

..................................

Nos. 2,86.1, 13B276, 131277 and 13B280

131277 20526 Arm Side Cover Cap

..................................

131280 20,520 “ “ “ “ Steady Bin

2,86.1 20503 “ “ “ “ Thumbscrew....

08118 0017 “ “ “ Casket (cork)

..........................

10,57.1 20503 “ “ “ Screw......................................

01250 20508 Balanee Wheel, 2 in. pulley, with two

51283c..........................................................

51283c 20503 Balance Wheel Set Screw.......................................

(18110 20.508 (loth Plate for 131081..........................................

1312.50 - - “ “ for 131262

6.8368 0918 “ “ .Slide (left)

131050 001.8 “ “ “ “ Sjiring

.......................................

......................................

...................

725.) 20503 “ “ “ “ “ Screw...

....

to

twin's кон MACHINE No. t-17-50

PARTS POR MACHINE No. 147-50

It

NO.

t:iio.-)i

.51011

Hi 1200

:ì811!)

72.5.1

20527
20527
20,501
20505

,5-101.5

151201

1510.41

151202

101 Ik

20.505
20505

50500k

151150

*08-1.55

*,540 IS

*08-1,5 1

*08-1.5,5

084,58 0010

08450

08400 0018
08401 0018

08402 0018
20254 20,504

20.508

1255k

20.505

1005k

20.521

08-152

0,8450 0010

0.8457 0010

10.55k 20,504

0010

800k

20.505

1057k

20.505

------

1722i; 20505
1725k 20.505

------

55(li) 20505

N M К

Cliith Plate Sli<le (1(!Г|| eoiiipl(0e, No.s.

0850,8, 151050 and hvi) 72,5,i...................

Cloth Plate Slide (right) for .5401,5

...............

“ “ “ “ “ 151201....

“ “ “ “ S|)riiig

................

“ “ “ “ “ Serew..

Cloth Plate .Slide (rigid) complettt for

HilO.81, Xo.4. 58410, ,5401 1 and two

725.1 ................................................ .

Cloth Plate Slide (ri.ght ) complete for

HÌ1202, Xos. 58110, 151200 and Iwo

725.1 .............................................................................................................

Cloth Plate completi' for )iS480, Xos,

51015, 0.8440 and 1510,51

........................

Clotli Pl.ite complete, for binding, for

151255, Xo.s. 1510,51, 151250 and

151201........................................................

< 'lot h Plate Serew (left )

“ “ 'Phread (liiard

.............................

“ (right)

................................

............................

“ “ “ “ .Screw (lower)
" “ “ “ “ (upper)

Crank Connectiug Rod (rod only)...................

“ “ “ ( 'ap (lower).. . .

“ “ “ “ iSeri'w

" “ “ “ (upper)....

“ “ “ “ " .Si'rew
" “ “ land Hearing

(lower)........................................................

Crank (onneeting Hod End Hearing

(upper)

...............................................

('rank Connei'ting Hod Head (lower)

Xos. ()8I55, 08454 and two 800k

Crank Connecling Hod Head (upper),

Xos. ,54018, 08-1.5,5 and two 1057k. .

Crank Connecling Hod Nut (lower)..

■' “ “ “ (upper)..

Crank Connecting Hod complete, .Xos.

1722k, 1725k, 084.52, 0,8450 and 08457

Crank Connecting Hod 0,845,8 with

151072........................................................

Pace Plate (lower half)....................................

“ “ “ “ ( laskel (cork). .
“ “ “ “ .Screw
“ “ (upper half)

.................

............................

" “ “ “ Position Plate

.Screw.

........................................................

NO. l'b.\TK

2S0i) 20,505
08405 0918
08404 9918

151197 9918

59543 20,520

75,5c 20525

.54048 9922

1342.58 9918

1542.59 9918

08495 9922

134200 9922

08407 9918

207k 20,503

08408 9918

*08409

08470

------

------

890e 20503

1057k 20503

08471 9918

170.) 20.503

131090 9922

134200 9922

.54177 20,525

,54249 20,525

157.1 20505

,50429c 20,503
*08473
*.54455

------

------

51001c 20.503

7071 20,520

217.1 20.503

08474 9918

1105c 20.503

131240 20,502

151190

------

.57234 20502

.57235 20.520

4.55c 20503

NAME

Pace Plate (upper half) Thunil) Screw.

Peed Bar..........................................................

Peed Bar com])lele, Nos. 50429c, 54048,

08403, 08407 and two 207e

........................

Peed Bar Hinge Pin (eccentric).......................

“ “ “ “ Collar with 735c . .
“ “ “ “ “ Set Screw..
“ “ Oil Pad (braided cotton)
“ “ Slide Block

.......................................

...................

“ “ “ “ 134258 with 08495

and 134200..................................................

Peed Bar Slide Block Oil Pad (wick).. .

“ “ “ “ “ “ Retainer

“ “ Wearing Plate

“ “ “ “ Screw

...................................

.....................

“ Connecting Rod with 1057e, 08409,

131090, 134200 and two 890e....................

Feed Connecting Rod Cap

..............................

“ “ “ 08408 with 08474
“ “ “ Cap Screw
“ “ “ Clatn|)ing Screw.
“ “ “ Cover

......................

“ “ “ “ Serew.........

“ “ “ Oil ]*ad (wick).. .
“ “ “ “ “ Retainer
“ Dog, 10 teeth (10 teeth to the inch)

for 38480.....................................................

I'eed Uog, 20 teeth (10 teeth to the inch)

for binding, for 131255

Peed Uog Screw

...............................................

“ “ .Stop Screw

“ Eccentric,

...............................

......................................

..............................................

“ “ Body......................................

“ “ “ Set Screw........................

“ “ ('laini)ing Washer

........................

“ “ “ Screw

Peed Eccentric, (adjustable) coinjilete,

.Xos. 217.1, 1103c, 7071, .54455, 08473

and two ,51()01c

Peed Regvdating Screw

.........................................

..................................

“ Hocking Praine with two 453c.. . .

“ “ “ 131240with59343,

08404 and 131197

Peed Hocking Prame Hinge Pin

“ “ “ “ “ Bushing

U U

.......................................

......................

it t( ti it

.Set ¡Screw...................................................

..

12

PAin'S L'OR MACHINE No. 147-50

PARTS FOR MACHINE No. 147-50

13

NO.

453c

К1.ЛГК

20,503

Feed Rocking Frame Hinge Pin Set

Na.MK

•Screw.........................................................

2,51 its

20503

2Sf)i)

20,521

131079

20.521

54027

20,521

175k

5 1227 20521

20.521

5422S
118178 20521

“ 4'luimh Screw

lHK>j)cr (closed eye)

“ (’anier witli t wo 175k

..........................................

.....................................

............................

“ “ Ailju.sting Screw..................................

“ “ Couneidion...........................................

“ “ “ Shaft

..................................................

“ “ “ “ Sleeve

(¡iiidc...............................................................

20522

(eccentric)...................................................

5121)31) 20.521

128419

Looper (aurii'i* Coiuicctiou Shaft Sleeve

(.'ap Sen'W

Looper Can ier Connect ion Shaft Oil Pad

9922

..................................................

(hiaided eottonl...........................................

1)8479

20.521

Looper Carrier Driver with (18480 and

four 175e.....................................................

*118180

175k

*118481

N ( )TE

Looper Cai rier Driver Cap

20521

20502

“ “ “ “ Screw..............................................

Loo|)er Driving Shaft and Feed Lifting

Eccentric with two (11.315

No. hShSl is re(|uired for repairs, the

; When

.............................

........................

—

.Arm Rotary Shaft U)ust he I'clurued to the

to he adjusted to the new part.

factory

*(18182

Loo|)cr Dri\'i)ig .Shaft and Feial Lifting

Fccenti'ic (1,8481 with 51027, 54227,

*11,8183

948n

(18181

—

20503

20.502

131028 20524

.54228 and (18479

Looper Driving Sliafi and I'ced Lifting

Kccentric Bracket witli 701k

l-ooper Diivinji Shaft and Feed Lifting

iLccentric Bracki't Screw

Looper Driving Shaft and Feed Lifting

Eccentric Bualiing

Looper Driving Shaft and Feed Lifting

......................................

.....................

...........................

......................................

Fccenti'ic Blushing Oil Plug.......................

20,503 Loo|ier Driving Shaft and Feed Lifting

7(1 1e

Eceenlrie Bushing Position Screw.. . .

(18197

9922 Looper Drir iiig Shaft and Feed Lifting

Eccentric Front Bearing Oil Pad

(wick)..........................................................

20,524 Looper Driving Shaft and I'eed Lifting

(11315

Eceeiitrie Oil Hole Plug

.............................

tllOE 20503 Loo{)er Diiviti^ Shaft and Feed Lifting

FlceentI'ic Screw.........................................

,51035 20,521

,511 19.1

20503

I-ooper llo!d(‘r with 1 Ld)c

“ “ Screw....................................................

............................

NO. }»LATK

1120c 20,521

(1848.5 20,502

(),848l) 20502

■13503 20.504
443c 20503

5103(1 20,523

131291 —

1133E 20,523
(14320 20523
1133E 20.523

68488 20523

68489 20,523

68490

----------

1.520.1 20523

131270 20523

8(llc 20523

853c 20523

(18491 20,523

I87f. 20523

54037 20.522

540.38 20522
17()j 20503

217c 20.503

857c 20.523

68192 9921

6,8493 9921

176e 20,503

(18494 9921

*19189

----------

I9,8e 20,524

NAME

Cooper Set Screw

............................................

“ Throw-out Handle with two

443c

................

......................................

Looi)cr Throw-out Handle Plunger..

“ “ “ “ Siu'ing
“ “ “ Set Screw. .

Needle Bar (hollow) with 857c

“ “ Bushing (lower)

.....................

........................

“ “ “ “ Set Screw.
“ “ “ (upper)

..................

“ “ “ “ Set Screw
“ “ Connecting LinkandThread

(upper) Controller

.......................................

Needle Bar Connecting Link Hinge Stud

(hollow)

...................

....................................

Needle Bar Connecting Link Hinge Stud

1)8489 with 8Glc and 131270

.....................

Needle Bar Connecting Link Hinge Stud

Nut...............................................................

Needle Bar Connecting Link Hinge Stud

Nut Oil Pad (wick)

......................................

Needle Bar Connecting Link Hinge Stud

Oil Plug Screw

............................................

Needle Bar Connecting Link Hinge Stud

Set Screw.....................................................

Needle Bar Connecting Stud with 21 If

and two 187e

...............................................

Needle Bar Connecting Stud Clamping

Screw...........................................................

Needle Guard...................................................

“ ‘‘ Holder

...................................

“ “ “ Screw............................

“ “ Screw.....................................

“ Set Screw.................................................

Oil Pipe (hack of arm) with 49191 and

1)8497, for oiling Feed Rocking Frame

Hi)ige Pin Front Bearing

Oil Pipe (hack of arm) Clamp

.............................

..........................

“ “ “ “ “ “ Screw.
“ “ “ “ “ Connection

with 49189, 1)8495 and two 198e, for
oiling Feed Rocking Frame Hinge

Pin Back Bearing.........................................

Oil Pipe (hack of arm) Connection Cap

ii U K (i a U H

Si'iew

...........................................................

I I I’AHTS FOR MACIIINK No. 1

RAR'I'S

FOR AIACHINK No. 147-59 15

NO, l‘\,.\TK NAMK

()X4!)r) 99122 Oil Ripe; (hack of ann) ('oiiiiectioii Oil

Rad (wickI..................................................

(iS49() 9921 Oil Ripe (back of anil) Coupling

171« 20524 “ .....................

(hras.s)

......

........................................................

........................

“ Nuf

0S497 9922 Oil Ripe (hack of arm) ()il Rad (vvdek)..

*49191 - - - ■“ “ “ “ “ Sleeve

.......................

0S49.S 9921 “ “ (froiil of arm) with R11089 and

fwo each 1755 and 49191, for oiling
Ijooiier Driving Shaft and Feed Lifting
Fccentric l''ront Bearing (coppia'

tubing).........................................................

I.'flll2 9921 Oil Ri|)e (front of arm) with (18497 and

13100:1, for oiling Feed Bar Slide

Block

..........................................................

1)8500 9921 Oil Ri|)e (front of arm) with 173:1,
49191, i;il084 and 131089, for oiling
.Ann Rotary Shaft Front Bearing
(co|)per tuhing)

...........................................

131001 9921 Oil Ripe (front, of arm) with (18497 and

13100;i, for oiling Feed ( 'onnecting

Rod...........................................................

131257

------

Oil Ri|)e (front of arm) complete. Nos.

t)8498, ()850t), 131001 and 131112

_____

131002 9921 Oil Ripe (front of arm) Coninadion with

131049 and two 198e, for oiling

l.ooper Throw-out Device

..........................

131003 9921 Oil Ripe (front of arm) Connection with

49189 and two 198n, for 131001 an.l

131112........................................................

131081 9921 Oil Ripe (front of arm) Connection with

*49189

131085 and two 198e, for 08500

------

Oil Ripe (front of arm) t'onnection Cap

for 131003

..................................................

...............

*131049 — - Oil Ripe (front of arm) (aitmeetion Cap

for 131002...................................................

*131085

------

Oil Ripe (front of arm) Comu'ction ('ap

for 131084...................................................

198e 20524 Oil Ripe (front of arm) Connection Cap

Screw

..........................................................

131004 9921 Oil Ripe (front of artn) Coupling

(center)........................................................

131001 9921 Oil Ripe (front of arm) Ootijiling

(left)............................................................

*13108()

------

Oil Ripe (froid of arm) Coupling

(right)..........................................................

.N1). 1>I..\TK

131087 9921

*131088 -------

1733 20524

(18197 9922

131089 9922

*49191 -------

04330 20502
25303 20523

131000 20523

1133k 20523

38450 20523

1133k 20523

54039 20522

OlOi 20503

11173 20522

447i' 20522

1903 20522

453c 20503

57257 20504

50592<’ 20504

1250c 20501
131007 20522
131008 20522

01075 20522

402c 20522

1:11009 20502

08hS4 20502

101j 20501

131010 20502

170j 20503

802n 20504

.38407 20502

lS(j>J,5—2

NAME

Oil Ripe (front of arm) Coupling

(right) 131080 with 13108S

........................

Oil Ripe (front of arm) Coupling

(right) Oil Lead

...........................................

Oil Riiie (front of arm) Coupling Nut

(brass)..........................................................

Oil Ri))e (front of arm) Oil Rad (wick)

for 131001 and 131112................................

Oil Ripe (front of arm) Oil Rad (wick)

for 08498 ami 08500
Oil Ripe (front of arm) Sleeve
Rresser Bar with 25303

“ “ Ball, size Lt

...................................

.........................

...................................

.................................

“ “ Bushing (lower)...........................

“ “ “ “ Set Screw.
“ “ “ (upper)

....................

“ “ “ “ Set Screw.
“ “ Guide Bracket with 453c,

040.1 and 19t)3

.........................................

Rresser Bar Guide Bracket .Adjusting

Screw'...........................................................

Rresser Bar Guide Bracket Guide

...................

“ “ “ “ “Set

Screw

...........................................................

Rresser Bar Guide Bracket Roller and

Stud..............................................................

Rresser Bar Guide Bracket Set Screw.. .

“ “ Lifter.........................................

“ “ “ Hinge Screw.......................

“ “ “ Stop Screw

.........................

“ “ Lifting Bracket with 402c..
“ “ “ “ Connection

('onnecting Rin.............................................

Rresser Bar Lifting Bracket Connection

Connecting Rin Set Screw.

Rres.ser Bar l.ifting Lever

..........................

...............................

“ “ “ “ F X t e n s i o n

(back)...........................................................

Rresser Bar Lifting Lever Fxtension

(back) Screw................................................

Rresser Bar Lifting Lever lixtension

(front)...........................................................

Rresser Bar Lifting Lever Fxtension

(front) Screw................................................

Rre.sser Bar Lifting Lever Hinge Screw.

“ “ Spring (Hat)

..................................

IG rAR'l’S I'OR MACIIINK No. 117-5!l

I’AR'FS

FOR MACHINK No. 147-50 17

NO. I'l.AlT, NAMF,

.'i.SlGS 2().a1!4 Pie.sser li.tr iSpriiijT Stud............................

2(iJ7(i '2(liy2i) “ Foot, Iliiif'tt Fill

■l(i(l,')() “ “ Plate
4()0r)7 “ “ Sliank

............................

..........................................

........................................

-ltit).")S 20r>2.4 PriAs.'icr l'’oot (hiug('d) (‘oin|>lefe, Nos.
2ti'27t), llittuG and 4ti0.57

..........................

litO.i 20”)21 Pre.sser Foot Screw............................................

57 Iw 20.52 1 Pres.sure R(‘eidatinft 'rimnili Screw.................

1.559w 20.524 “ “ “ “ Lock
Nut

..............................................................

15102.5 20524 Slack 'I'hiead Controllia-

....................................

51212 20.524 “ “ “ ('lani|).................

lot),I 20.524 “ “ “ “ Screw..

51011 20.524 “ “ Uefiulator

..............................

51012 20524 “ “ “ Holder with 175io

and two 5t)l,50(:..........................................

175k 20.521 Slack'I'liread Keiinlalor Holder (’lam|)-

iiift .Screw

..................................................

151012 20.524 Slack Tliread Regulator Holder Shaft

24202 20.521

Collar with 1019c

.......................................

1019c 20524 Sla(4r 'riiread Regulator Holder Shaft

('(illar ,S(4 .Screw.......................................

.5404 1 20.521 Slack Threatl Regulator Holiler .Shaft

Crank (forked.) with 12.55c

.......................

12.55c 20522 Slack Thriaid Regulator Holder .Shaft
Crank Std .Screw

501.50c 20.524 Slack'riiread Regulator Set Screw

........................................

......................

151012 20502 'I'eusiou (under thread) Hracket..........................

OOIf 9924 “ “ “ “ .Staew..

2102 9924 “ “ “ lli.se

.....................

51.570c 9t)21 “ “ “ Regulating

'riiuiuli Nut..................................................

50.i2(ic 9924 'I'eicsion (under thread) .Screw Stud

59.559
.5t)52(ic With 51.570c

59.5)!1 9924 'I'eu.siou (under I hread) Siiring

................................

.........................

59.557 9921 " ..............................Rushing

(largi'i..........................................................

59.55.5 9924 'reusiou (under thread) .Spring Rushing
(snialR

........................................................

57070 9924 'Fension (under thread) 'Fhread (inide

(doulile)

......................................................

54015 20.527 'Fension (upper I hread) Ri acket

..........................

57tl,t 9924 " “ “ Screw..

2102 9924 “ “ “ Disc

.....................

51.570c 9924 “ “ “ Regulating
'Fhnndi Nut

.................................................

NO. PI.ATK

52572 9924
5498S 9924
5404(1 20.527
54047 9924

.54048 9924

024c 9924

08201 9924

151011 9924

510c 9924

1547j 9924

50520c 9924
59559

.59.555 9924

------

59557 9924

59558 9924

57070 9924

.55225 9924

190,1 20524

1510,80 20,524

151014 20524

51551c 20,524

58478 20.524

151157 20,527

90.51) 20501

40041 20,520

190j 20524

58481 20524

590i) 20,524

NAMK

'Fension (uiiper thread) Releasing Disc.

“ “ “ “ Pin. .
“ “ “ “ Shaft

U U ((

Crank with 021c...........................................

'Fension (upper thread) Releasing Shalt

Crank Link

...................................................

'Fension (upper thread) Releasing Shaft

('.rank Set Screw

..........................................

'Fension (ipiper thread) Releasing Shaft

Spring...........................................................

'I'ension (upper thread) Releasing Shaft

Sjiring Position Plate

...................................

'Fension (upper thread) Releasing Shaft

Stop Screw...................................................

Tension (upper thread) Releasing .Shaft

.Stop .Screw Nnt..........................................

'Fension (u])per tliread) Sere w Stud

U U a ii H

50520c with 51570c.....................................

'Fension (upper thread) .Spring........................

“ “ “ “ Rushing

(large)

..........................................................

'Fension (upper thread) .Spring Rushing

(small)..........................................................

'Fension (u])per thread) 'Fhread Guide

(double)

'Fliread (under) Kyolct (back;

.......................................................

........................

“ “ “ “ Screw...
“ “ “ (front)

................

“ “ 'Fake-np wit h I wo 51534c
“ “ “ Set .Screw

..................

“ “ “ Staple, with two

each .590n and 58481

..................................

'Fhrearl (under) 'Fake-up Staple Rrackei

with 400c

.....................................................

'Fhread (under) 'Fakc-up Staple Hracket

Screw

...........................................................

Tliread (under) 'Fake-up Staple .Spring

.Screw

..........................................................

'Fhread (under) 'Fake-up Stajile Thread

Guard

...........................................................

'Fhread (under) 'Fake-uj) Staple Thread

(luard .Screw................................................

19

18

F.\RTS

FOR MACIIINB No. 147-50

1‘LATE

NO.

141090 20520

20524

100.1

04450

400c

20,520

20520

20.520

RilOlti

(under) d'akc-up »Stripper

“ “ “ “ Screw
“ “ “ Thread Cuiaril

(brass)

.........................................................

d'liread (under) Take-u]) Thread Guard

»Steady Ihn

4'hread (under) Take-u]> Thread (iuard

NAME

...............

.................................................

.Steady I’in Set Screw.................................

48484 20.520 'I’liread (u))per) Fyelet....................................

20524

100.1
20,520 “ “ 'I'ake-u])

54194
54194 20520

20.520

08104

20.520

1449.1

.54195

“ “ “ Screw

“ “ “ Flate

“ “ “ “ Siiring....

“ “ “ “ “ Screw

—

'I'hrcad (u])per) 'l’ake-u]i complete, Nos.

1449.1, .54194, .54194 and 08104

211k 20.524

481,80 20525

141255

20.525

742k 20504 ‘‘ “ »Serew..................................................

•1.5404
15405

d'lii’ead (upp(‘i ) 'bake-u]) S(‘( »Serew

4'hroal Flale i'oi- 54177....................................

—

“ “ Rivet.......................................................

..................................................

................................................

....................................................

.............

..........

“ " biniling, for 54249... .

Genuine Singer Needles should be used

in Singer Machines.

These Needles and their Containers

are marked with the

Company’s Trade Mark “SIMANCO.** 1

Needles in Containers marked

**For Singer Machines’*

are not Singer made needles. 2

LIST OF PARTS COMPLETE

FOR

MACHINE No. 147-51

FOR SEAMING PANTS, KNICKERS, PLAY SUITS, LIGHT AND

MEDIUM OVERALLS, UPHOLSTERY, SEAT COVERS, KNIT

UNDERWEAR, BATHING SUITS, MATTRESS WORK, WORK
SHIRTS, FLANNEL OR HEAVY MATERIAL, FABRIC GLOVES,
ETC. ONE NEEDLE, ONE LOOPER. NEEDLE BAR STROKE

INCHES. THE LOOPER IS ARRANGED SO THAT IT

CAN BE THROWN OUT OF POSITION FOR CONVENIENCE

IN THREADING. AN IMPROVED OILING SYSTEM AUTO
MATICALLY OILS ALL OF THE PRINCIPAL BEARINGS OF
THE MACHINE. BALANCE WHEEL NO. 64259. DIAMETER
OF BELT GROOVE 2 INCHES. SPEED UP TO 4000.

NO. 1T..\TK NA.ME

*()8427

08428 0017 Arm bottom (’over...............................................

08420 0017 “ “ “ Gfsket (eork)....................

08.450 0022 “ Oil Cup, for oiling Ann Hock

08140 0922 Arm Oil Cup, for tilling oil reservoir. . . .

54048 0022 “ “ “ Oil Fad (braided cotton)..

131294
131204

131050 20.504 “ “ “ “ “ Washer

()8433 0910 “ “ “ Bushing (back)
08434 “ “ “ “ “ Ö8433

08435 9010 .Arm Rock Shaft Bushing (back) Cap

131005 9910

.52045 9922 Arm Rock Shaft Bushing (back) Oil Fad

f)8430 9910 .Arm Rock Shaft Bushing (intermediate)

()8447

------

Arm, u))per and lower (.solid) with 04Si),

15404, ()848H, two 15405 and four

i:U022..........................................................

10.57E 2050;i “ “ “ Hcrew

Shaft h’ront Bearing

------

“ Hock Shaft........................................................

-------

“ “ “ 131293 with 123.5k and

..............................

....................................

131295.........................................................

1309o 20.504 .Arm Hock Shaft .Adjusting Screw......................

with 52045...................................................

W^asher (fibre)............................................

(wick)

..........................................................

440c 20.503 .Arm Rock Shaft Bushing (back) Set

Screw

...........................................................

-----­08440 with .52045

.......................................

....

PARTS l-'OR, MA(’lir.\l'] No. 117-51

P.AllT'S FOR M.ACIIINIO No. 1-17-51

21

NO.

.52015 0022

.\rm Rock Shaft Bushing (inlormcdialc)

()il Pa<l twick)............................................

■I2:!c 20.50:5

.\rin Rock Shaft Bushing (iiitcrniediatc)

Set .Screw...................................................

i:U072 0010

.\rm Rock Sliaft Crank, Rack (ball

Rearing, solid) with two 500S:ic

oOOMSc 20.50:S

.\rin Rock Siiaft, Craidc (Rack) .Si't,

Scr(“w.........................................................

P51205

.\rni Rock Shaft Crank (front) wit it

------

85:'c.............................................................

127S:5,S

51105
.52015

.\rni Rock .Shaft Crank (front) Pin

0010

0022

“ “ “ Flanged Bushing (front)

()il Pad (wick)

15:ir 20.50:5

.\rni Rock Shaft Flanged Bushing

(front) Set ¡Screw

12:5.5f 20.50:5

■12:50.5 0022

.\rm Rock Shaft Oil Plug Screw..

“ “ “ “ Pad (braided

cotton) for oiling Back Bttaring

.51060 0022

Arm liock Sliaft, Oil Jkid (braided

cotton) for oiling int(‘rni(‘diate H(‘ar-

131101

20.5f),8 .Aiin Rotary Sliaft...........................................

No. IdlKM is reijuirtul for n'pairs, the

: When

N1 ll'E

l.uojHT Driving sliaft and Feed Lifting Fecini-

t l ie must

he returned to the factory to he

adjusted to tin' new part.

-, —

1:5110.5

Arm Rotaiy Shaft 131101 with 6IO1:,

511,50, 6.81.50, 13110.8, 131111, 131181

6,8112 20.520

20.503

761t;

68113 0017

and 131101

Ai'tii Lofai'v Sliaft Hushing (front)

Screw

.Ann Rotaiy Shaft Bushing (inter-

.................................................

..........................................................

nu'diali'i.......................................................

6,81 11

Ai'in Rotaiy Shaft- Bushing (intia-

mediate) t><S44d wit.li 4112(S

11128 0022

Ann Rotary Shaft Bushing (iiitia-

niediatit) Oil Pad (Rraidcal cotton). . .

-122c 2I)50:5

.Ann Rotary Shaft Bushing (inter-

nicdiate) .Set Screw (long)..........................

500Slc 20.50:5

.\iin liotary .Shaft Bushing (inter

mediate) .Set .Sc.rew (short).......................

5-11.50 20.520

.Arm Rotary .Shaft Collar with two

125NC.........................................................

NAMK

................

.................

.............................................

.......................................

..................

................

“ “ “ “ “ S e t

..................

iN'O. l'l..vru NAME

1258c 20.521 Ann Rotary Shaft Collar .Set Screw.

08115 0017 “ “ “ Flanged Bushing
08110

----------

Li U ii “

08115 with 12:507.......................................

12:507 0022 Ann Rotary Shaft Flanged Bushing

Oil Pad (braided cotton)

..............................

150f. 20.50:5 Ann Rotary Shaft Fhinged Blushing

Screw...........................................................

12:507 0022 Ann Rotary Shaft Front Bearing Oil

Pad, lower (braided cotton).........................

51218 0022 .Ann Rotary Shaft F'ront Bearing Oil

Pad, uitper (braided cotton).........................

57071 0022 Ann Rotary Shaft Oil Pad (braided

cotton) for oiling Back Bearing...................

oOOOt) 0022 .Ann Rotary Shaft Oil Pad (braided

cotton) for oiling Intermediate Bearing

1 111) 2050:5 Ann Rotary Shaft Screw....................................

1:51271) 20.521) “ Side Cover (oil vent)..............................

i:S1278

------

Ann Side Cover (oil vent) coini)lete,

Nos. 28t)j, 131276, 131277 and 131280

1:51277 20521) Ann Side Cover Caj)......................................

1:51280 20.521) “ “ “ “ Steady Pin

...................

281)j 20.503 “ “ “ “ Thumbscrew....

68-118 0017 “ “ “ Gasket (cork)

.........................

1057.1 20.50:5 “ “ “ Screw......................................

61250 20508 Balance AA'heel, 2 in. pulley, with two

5128:)c.........................................................

5128:5c 20.50:5 Balance Wheel Set Screw

.................................

68110 20508 Cloth Plate for 131081.....................................

];i 12.511 -

....

- “ “ 131262

..................................

68:568 0018 “ “ Slide (left).................................

1:51050 0018 “ “ “ “ Spring

..................

72.5j 2050:5 “ “ “ “ “ Screw...

131051

------

Cloth Plate Slide (left) complete. Nos.

6S:568, 13 1 050 and two 725j....................

.51011

1:51260

3S110

725.1

,5-1015

20527 Cloth Plate Slide (right) for 51015

20.527 “ “ “ “ “13121)1....

20.501 “ “ “ “ Spring.................

20.50:5 “ “ “ “ “ Screw..

------

Cloth Plate Slide (right) complete for

......................

131081, Nos. 38119, 54014 and two

725.1

.........................................................

------

131201

Clotli Plate Slide (right) complete for

131262, Nos. 38110, 131260 and two

725.1

........................................................

51015, 68110 and 131051

...........................

131081

------

Clotli Plate comj)lete for 38486, Nos.

I'ARTS FOR MACIIINK No. M7-51

RAirrS

FOR MACHINK No. 147-51 23

NO. [*I..\TK NA M K

131202

----------

(’httli Plate (M>mj)lete, foi’ for

13125.5, Nos. 131051, 131259 and

131'201.....................................................

1011k 20.-)03 Cloth Plate Screw (left)...................................

50390k 20503

131130 2050S “ “ Thread (luanl

389k 20,503

.50173k 20,503

08152 9910 ('rank Connecting Rod (rod only!

*081,53

---------

S90k 20503

*51018

----------

1057e 20.503

*08151

----------

*081,55 -

“ “ “ (I'iglil)..-

.............................................

.......................................

“ “ “ “ Si'rcw (lower)
“ “ “ “ “ (upper)

...................

“ “ “ Cap (lower)... .

“ “ “ “ “ Screw'

“ “ “ “ (upper)....

“ “ “ “ “ Screw
“ “ “ F. nd Bearing
(lower)

........................................................

Crank Connecting Rod Knd Hearing

(U|ipcri........................................................

081.50 9910

Crank ('onnecting Rod Head (lower),

Xos. (>8451 and (wo 8i)(in

081.57 >1910 Crank ('onneeting Rod Head (iipiier),
Nos. .54018, 1)8455 and luii I057e

1722k 20.503

1723e 20503

081.58 9910

Crank Connecting Rod Nut (lower).. . .

“ “ “ " (upper)....

(’rank (’oniu'eting Kod complete, Xos.

1722e, 17'23k, 0,81,52, 08150 ami 084,57

0,8459

---------

(’rank (’oniu'ctin^ Kod (>8458 with

131072........................................................

0,8100 9918

0.S10I i»9l8
330n 20503

I'’ae<‘ Plat(* ilowei' halft

“ “ “ (I'asket {('ork 1. .
“ “ “ “ Screw

................................................

..................

0,8102 9918 “ “ (u|iperhalfl..............................................

29231 '20501

“ “ “ “ I’osition Plate

1053k 20501

Screw..............................................

2,soil 20,503

08103 9918

0.8101 9918

Face Plate (u|iper Indfl 'riiiimli Screw..
Peed Bar

.......................................................

I'ced Ikir eoj)j[)!eIe, Xos. /)012!)r, r)4f)48,

()84i)8, (i84t)7 and two 207k.. . .

131197 991,8

59343 '20520

73,5r 205'23

,51048 t)922

134'2,58 991,8

1312,59 9ÌI18

08495 !>i)22

131'200 9922

Feed Bur Hinge Pin (eccentric)

......................

“ “ “ “ Collar witii 73,5c.. .

“ “ “ ■■ “ Sel Screw..
‘‘ “ Oil Pad (Ki'nided cotton)
“ “ Slide Block

................................

" “ “ “ 134‘2.58 with 0849.5

and 134'200

....................................

I'ecd li.-ii- Slide Block Oil I’ad (wick). . .

“ “ “ “ " “ Rclainer

NO.

08107

207k

131100

*131107

131lOS

890k

1057e

08471

.501,5-2.1

131109

131090

134'iOO

,54177

54249

1.57,1

,50429c

*54021

*23729

51001c

7071

217.1

.5102.5

1103c

131'240

131100

,57231

,5723.5

4.53c

4.53<

2.5018
28C)i) 20.503

131133

131134

,54027

17,5k

54'227

5 I2'2,8

CLATK

9918
20503
20527

------

—

20503

20503

9918
20521
20,520

9922
9922

20,52.5

2052,5

20.503
20503

________

.----

20503

20.5'20

20.503

20527

20.503

20502

—

20502
20520

20.503

20503

20.522

■20,521

20,521
20521

•20.521
20,521

NAMK

Feed Bar Wearing Plate

“ “ “ “ Screw

..................................

.....................

“ (A)nnectingRodwithl057E, 131090,

131107, 134200 and two 890k

.

Feed ('onnectiiig Rod Ca])

...................

..............................

« “ 131100 with

54025...........................................................

Feed Coiineeting Rod C'ap Screw

...................

“ “ “ ('lamping Screw'.

“ “ “ (iover

.....................

“ “ “ “ Screw..........

“ “ “ “ Spacing

Washer.........................................................

Feed Coimecting Rod Oil Pad (wick).. .

“ “ “ “ “ Retainer
“ Dog, 10 teeth (10 teeth to the inch)

for 38480

.....................................................

F'ced Dog, 20 teeth (10 teeth to the inch)

for hinding, for 131255

...............................

Feed Dog Screw...............................................

“ “ Stop Screw.......................................

“ Eccanitric...................................................

“ “ Body
“ “ “ Set Screw
“ “ Clamping W'asher

..................................

.............

.......................

“ “ “ “ Screw

Feed Fca'.entric (arljnstable) complete,

Nos. 217j, 1103c, 7071, 23729, 54024

and two 51001c

Feed Regulating Screw

...........................................

...................................

“ Rocking Fran\e with tw'O 453c.. . .

“ “ “ 131240with59343,

08404 and 131197

Feed Ro(-king Frame Hinge Pin

“ “ “ “ “ Bushing

4i U it ((

.......................................

.....................

Set Screw.....................................................

Feed Roctking Frame Hinge Pin Set

Screw...........................................................

(ioide................................................................

“ Ttuiml) Screw...........................................

I.ooper (closed eye)

—

“ 131133 with 229j and 131135...
“ Carrier w'ith two 175e

.........................................

.............................

“ “ Adjusting Screw........................

“ “ Connection
“ “ “ Shaft

................................

........................

21

i’ART.S J’Oli MACItlNr: No. М7-Л1

PAirrS

1

FOR MACHINK No. 147-51

25

NO. i'i..^TK N.\Mv:

(iS)7,S 20.52) i.oopcr Ciiirier (;(jmu!cticm Sliuft

U'cccul m-)..................................................

r)12l).'ii) 20.521 Loopcr ('uiTi(>r ('oniuMOioii Shaft Sl('(!vc

Cap Sci'ow

..................................................

liSlli) i)i)22 hooper (.'airier ('ouneetiiin Sliaft Oil

Pa<l (Imuded cotton)

..................................

(iSlT'.t 20521 hooper Carrier Driver with (iSlKO and

four !7.5k............................................................

*()St.S0

------

I.oo|)er Carrier Driver Caji..................................

1701-; 20.521 “ “ " “ Sei-evv

............

hi) 110 20.527 “ Drivirifi Shaft and FeecI LiffiiiK

Meeentlie, with two (ilill.5..........................

Xotk: When No. V.llllO i.s reiinireil for rejiairs, the

,\riu Rotary Shaft iiiust be returned to t he factory

to be adjn.sted to the mnv part.

12)1111

------

J.ooper Driving Shaft and Feed I.ifting

Keeentrie. RtlllO wilii ;il027, 51227,

51228 anil 08-17!).......................................

*081.85

------

hooper Driving Shaft and l'’eed Lifting

Jiceentrie ilraeket with 7(ilE

.......................

tllSi) 20.505 hoo)ier Driving Shaft, and b'ced hifting

Keeentrie Hraeket Screw'

...........................

(i.SlS-l 20.502 Loo|)er Driving Shaft and Feed I.ifting

Keeentrie Ilii.shing, . ,

...............................

)iill)28 20.521 l.ooper Driving .Sliaff and h’eed Lifting

Keeentrie, Hushing Oil Ring

......................

7(ili; 20.505 homier Driving Shaft and Fe,e,d Lifting

Keeentrie llii.stiing I’o.sition Seroiv., . .

0S107 !)'.)22 hooper Driving Sh.aft and Feed hifting

Keeentrie Id-onl Hearing Oil Had Iwiek)

01515 20521 hoojier Driving Shaft and Feed Lifting

Keeentrie Oil Hole. Plug

............................

(ilOn 20505 T.ooper Driving .Sliaft and Feed Lifting

Kreeiili ie Screw.........................................

5105 5 20.521 hooper Holder w'ith 1120i'

...................................

olllO.i 2tl505 “ “ SiTew..................................

151155 211.521 “ Needle (luard with llilO.5...................

111105 20.521 “ “ “ Pill

220,1 20,521 “ “ “ Screw

..........................

......................

1120c 20,521 “ Set Screw.................................................

08185 20,502 “ 'riirow-ouf Handle with two

LI 5c

...........................................................

O.S lSti 205t)2 Loopei-'Phrow-ont Handle Phniger

.....................

-15.505 20.504 “ “ “ “ Spriiig

■115c 20,505 “ “ “ Set Sereiv. . .

14,.\TE

NO.

20.525

541150

1512!)!

0452(1

1155i.;

08188

08489

OS 100

20525

20,525

20525

20,525

20525

---------

1 1 5,5e

1520,1 20.525

151270 20,525

Stile 20,525

8.55c 20.525

20.525

tiSH.H

20525

1S7e

20.522

.51057

20.522

5105S

20505

170.1
20505

217c

S57c

20525

08102

0021

0810.5 0021
17tii; 20505

ti.SlOl 0021

*l!)LSi)

----------

IOSk 2052-1

08105 !)022

0S400 0021

1755 20521

0SI97 0022

*10101

-----------

N'A.ME

Needle Har (hollow) with 8,57o

—

“ “ Hushing (lower)...........................

......................

“ “ “ “ Set Screw.

“ “ “ (upper)

....................

“ “ “ “ Set. Screw.

“ “ Connecting Link and Thread

(uiiper) Controller........................................

Needle Har Connecting lank Hinge

iStnd (hollow)

..............................................

Needle Har Connecting lank Hinge

Stud 08489 with HOlc and 151270., . ,

Needle Har Conneeting Link Hinge

Stud Nut.......................................................

Needle Har Connecting Link Hinge

Sind Nnt Oil Pad (wick)

..............................

Needle Har Couuectiug Link Hinge

Stud Oil Plug Screw

....................................

Needle Htir Connecting Link Hinge

Sind Set Screw.............................................

Needle Har Connecting Stud with 21 If

and two 187e................................................

Needle Har Connecting Stud Clamping

Si;rew...........................................................

Needle (luard

...................................................

“ “ Holder.....................................

“ “ ‘‘ Screw

...........................

“ “ Screw......................................

“ Set Screw

.................................................

Oil I’ipc (back of arm) with 49101 and

08497, for oiling Feed Rocking Frame

Hinge Pin Front Hearing

.............................

Oil Pipe (back of arm) Clamp..........................

" " “ '■ “ Screw
“ “ “ “ “ (Joniiection

will) 49189, 08495 and two 19Se, for
oiling F'eed Rocking Frame Hinge Pin

Hack Hearing

Oil Pijie (back of arm) Connection Cap

U 4( U U U U i(

Screw

..............................................

...........................................................

Oil Pipe (back of arm) Connection Oil

I’ad (wick)...................................................

Oil Pipe (back of arm) Coupling......................

“ “ “ “ “ “ Nut

(brass)..........................................................

Oil Pipe (back of arm) Oil Pad (wick)..

“ “ “ “ “ Sleeve

......................

...............