SINGER 147-5 User Manual

Form I8A26, Revised (241 )

Printed in U. S. A.

LIST

PARTS

MACHINES

Nos. 147-5, 147-6

and 147-37

THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR OILING

To Insure easy running and prevent unnecessary wear, the machine requires oiling and, when In continuous use. It should be oiled at least twice each day.

Apply "singer Oil for High Speed Sewing Machines" (Cloth and Leather) Tor general use, or "Singer Stainless Oil ior High Speed Machines" where a stainless oil la de sired, to all oil holes, oil tubes and other places In mov

able contact.

INDEX

Page

Accessories.................................................................................................. 34

Attachment for Binding and Fringing Edges of Rugs for

147-37 Machines...................................................................................... 34

Attachment for Fringing and Taping Edges of Rugs for

147-37 Machine......................................................................................... 35

Belt Guard..................................................................................................... 35

Bench Stand................................................................................................... 35

Fittings for 147-6 Machine....................................................................... 33

Fittings for 147-37 Machine.................................................................... 33

Foot Lifter Parts............................................................................................ 36

Guide............................................................................................................... 36

Knee Lifter Parts.......................................................................................... 36

Machine Base................................................................................................. 37

Machine Base Oil Drain Jar................................................................... 37

Machine No, 147-5.

Machine No. 147-6......................................................................................... 13

Machine No. 147-37....................................................................................... 23

Numerical List of Parts................................................................................. 43

Obsolete Parts................................................................................................ 41

Tape Holder

Tape Reel........................................................................................................ 38

Thread Unwinder.......................................................................................... 39

.....

......

.......................

............................................................................. 5

......

.................................................................

1939, 1940 and 1941

by The Singer Manufacturing Co,

AH Rights Reserved for all Countries

INSTRUCTIONS FOR ORDERING

In ordering from tlUa list, use (ЖЬУ the part NUMBER In the

FIRST column.

The number stamped on a Sewing Machine Part Is la every case

the number of the single part only.

ЕЛ-егу combination of parts sent out as such has Its specific

number, which, although not stamped on the parts, must be used

when ordering the combination.

Each number always indicates the ЗАРЕ PART in whatever Hat

it appears, or for whatever machine.

The letters after some of the numbers indicate the style of

finish only, as follows:

A-Hardened, Polished, Nickel Plated and Buffed A.A-Buffed and Chromium Plated A.B-Hardened, Polished, Buffed and Chromium Plated A.C-Brcvfn Baking Enamel Finish A.D-Oray Baking Enamel Finish A.E-Hardened, Bright Rumbled and Nickel Plated A.F-Hardened, Bright Rumbled, Nickel Plalod, Brlglit Rumbled and

Chromium Plated

B-Pollshed, Nickel Plated and Buffed

C-Hardened Only C.R-Hardened and Merllzed

D-Pollshed Only

E-3oft, Not Polished

F-Hardened and Polished F.J-Hardened, Polished and Nickel Plated

0-Brlght RiOTbled and Nickel Plated

H-Blued

J-Nlckel Plated СЫу K-Hardened and Nickel Plated L-Brass Plated M-Qxldleed N-Japanned, Dull P-Japauned, Bright

P.P-Wrlnkle Finish

R-Merllzed S-Gadmlum Plated

T-Copper Plated T.A-Hardened, Polished, Copper and Nickel Plated and Buffed T.B-Copper and Nickel Plated and Polished T.J-Copper and Nickel Plated Only T.K-Hardened, Copper and Nickel Plated T.L-Copper and Brass Plated T.M-Copper Plated and CDcldlzed

U-Zlnc Plated

V-Sllver Plated

W-Polished and Nickel Plated

X-Black Oxide, for Iron and Steel X.C-Hardened and Black Oxide, for Iron or Steel

Y-Black Nickel Plated Only

Z-Chromlum Plated Z.A-Hanlened,Polished,Nickel Plated,Buffed and Chromium Plated Z.B-Pollahed, Nickel Plated, Buffed and Chromium Plated Z.C-Hardened and Cliromium Plated Z.D-Pollahed and Chromium Plated Z.Q-brlght Rumbled, Nickel Plated, Bright Ruiifcled and Chromium Plated Z.J-NIckel and Chromium Plated Z.T-Copper and Chromium Plated

These letters MUST BE USED when they appear in the list; and

AFTER the number as in the list.

In thlj series:

The figures in the second column refer only to the plates,

Illustrating the parts, and are NOT TO BE USED In ordering.

Parts marked with an asterisk (•) are furnished only when

repairs are made at factory..

When ordering parts which differ as to Gauge (the distance between аеапв) the Gauge, as well as the Number must be given on order.

1 to 1500, 50001 to 51500 and 140001 to 142000 are Screw НитЬех-а 1501 to 1000 and Б1501 to 51000 are Nut Numbers 1001 to 2000 and 51001 to 52000 are Roller Numbers 2001 to 50000 and 52001 to 140000 and 142001 to 190000 are Sewing Machine Parts, 190001 and upward are numbers of Electrical Parts.

LIST OF PARTS COMPLETE

FOR

MACHINE No. 147-5

FOR UPHOLSTERY WORK ON AUTOMOBILES. ONE NEEDLE, ONE LOOPER, TWO-THREAD CHAIN STITCH. FOOT LIFTER. CLEARANCE UNDER PRESSER FOOT 1/4 INCH. SPEED

UP TO 3000 R. P. M., ACCORDING TO THE

/MTERIAL BEING STITCHED.

No. Plate Name

*68117

42366 8901 Arm Oil Pad (braided cotton) for oiling

56006 8901 Arm Oil Pad (braided cotton) for oiling

56003 8985 Arm Oil Tube with 52045, for oiling

11119 8901 Arm Oil Tube with 52045, for oiling

,52045 8901 Arm Oil Tube Packing (braided cotton)...

68116 9904 " Rock Shaft............................................................

63119

64386 8901 " " " Bushing (back)

446C 8901 n " " '• 3et Screw..

-------

Arm, upper and lower (solid) with 948J,

15404, 54034 and two 15405

Arm Roolc Shaft Front Bearing

Arm Rock Shaft Intermediate Bearing.

54326

..................................................................

68137

..........

.......................................................

.........

" " " 68118 with 54004 and 64255

............................

......................

...............................

PARTS FOR MACHINE No. 147-5

No.

64368

Plate 8901

Arm

423C 8901

52045 8901

Arm

cotton).

54004

453C

131072

8901

20693

Arm

" " " Set Screw

" " Crank, back (ball bearing,

solid) with two 50083C

50083C 8901

64255 9882

2117

453C

54105

8901 8901 8901

52045 3901

Arm

Pad (braided cotton).................................................

453C

8901 Arm

Set Screw.

*68110

9904 Arm

Note: When No. 68110 is required for repairs, the

Looper Driving Shaft and Feed Lifting Eccentric must be returned to the factory to be adjusted to the new part.

68111

Arm Rotary Shaft 68110 with 640E, 54113,

54383,54450,64351,64355 and 131344..

54367 8985

76 IE

54007

8901 8902

Arm Rotary Shaft Bushing (front)....................................

" " “ '' " Set Screw " " '' " (Intermediate).

54089

54007 with 64500 and 64805

64506 8902

Arm Rotary Shaft Bushing (Intermediate)

Oil Pad, long (braided cotton).................................

64805 8985

Arm Rotary Shaft Bushing (Intermediate)

Oil Pad, short (braided cotton)................................

422C 8901

Arm Rotary Shaft Bushing (Intermediate)

Set Screw (long)

50084C 8901

Arm Rotary Shaft Bushing (Intermediate)

Set Screw (short)

54450

1258C 20693 54009 54090

20693

8902

" " ■' '' Set Screw

Arm Rotary Shaft Collar with two 1258C..

" " “ Flanged Bushing..............................

" '■ " " " 54009 with

58039 and 64805

58039

8902

Arm Rotary Shaft Flanged Bushing Oil Pad,

long (braided cotton)

64805

8965

Arm Rotary Shaft Flahged Bushlhg Oil Pad,

short (braided cotton)

159F

49013

8901 8904

“ " “ Front Bearing Oil Pad

Arm Rotary Shaft Flanged Bushing Screw..

(braided cotton).......................................................

Name

Set

.............................

...........................................

Rock Shaft Crank (back) Set Screw...

" (front) with 453C..

" '' Pin....................

" " Set Screw..

Flanged Bushing (front)..

" " " Oil

..................................

......................................................

.....................................................

.........................

.....................................................

...............................................

..............................................

No.

144D

15196

286D

54010

286D 64259 51283C 54011

54012 38419

725J

54013

54057 38419

725J

54058

54060

lOllF 50473F 54104

1235F

54017

131344

896E

1057E 68350 54218

6575

64 269

46111

286D 54488 54020 57225

4530

54111

54113

896E

105 7E 54023 21506

457C

Plate 8901 8902 8904

8904 8904 9902

20693

8903

8902 8904 8904

9689

8904 8904

8904. 8904 9904 8904 8902

8904 8904

20693

0904

9889 9901 8904 9903 8902 8904

8901 8902

8904 8904

9882

0904

8904

Arm Rotary Shaft Screw........................................

Name

“ Side Cover (back)........................................................

" " " ” Thumb Screw...................

........................

(front)

..................................................

" " " " Thumb Screw...................

Balance Wheel with two 51283C......................................

" " Set Screw.................................................

Cloth Plate.........................................................................

" " Slide (left) “ '' " ” Spring

....................................................

............................

" " " " " Screw...

Cloth Plate Slide (left) complete. Nos.

38419, 54012 and two 725J

Cloth Plate Slide (right)

..........................

" Sprlhg.............................................

.....................................

....................................................

" " " " " Screw.,

Cloth Plate Slide (right) complete. Nos.

—

38419, 54057 and two 725J

Cloth Plate complete. Nos. 54011, 54013

and 54058

.................................................................

.....................................

Cloth Plate Screw (left).....................................................

" " " (right) " “ Thread Guard " " " " Screw

.............................................

..........................................

.............................

Crank Connecting Rod with 6575, 54218,

68350 and two each 896E and 1057E...

Crank Connecting Rod 54017 with 131072..

" Cap (lower) Screw.. “ " (upper) Screw.. " Oil Cup

.................................

'' " “ Pad (braid

ed cotton)

Crank Connecting Rod Oil Cup Pad Stop

.....................................

/......................................

Face Plate...........................................................................

" " Pin...................................................................

" " Thumb Screw

Feed Bar with 50429C and two 453C

.................................................

...............................

" " Connection.........................................................

" " Hinge Pin............................................................

" " " " Set Screw ..................................

" Connecting Rod with 1057E and two

896E

.........................................................................

Feed Connecting Rod 54111 with 54025....

'' " " Cap Screw.

.........

" " " Clamping Screw

" '' " Hinge Pin.................................

" '' " " “ Collar

with 457C..................................................................

Feed Connecting Rod Hinge Pin Collar oet

Screw........................................................................

....................

.....................

8 PARTS FOR MACHINE No. IA7-5

PARTS FOR MACHINE No. 147-5

No. Plate Name

68120 9892 Feed Dog,15 teeth (10 teeth to the Inch)

for 68139...........................................................

50073J 9901 Feed Dog Screw........................................................

50429C 8904 “ " Stop Screw..................................

51061C 8958 " Eccentric Body Set Screw

7071 8904 " " Clamping Washer

217D 8904 « « " " Screw

......................

....................

______

54025 8985 Feed Eccentric (adjustable) complete,

Nos. 1103C, two each 217D, 7071 and

1103C 8904 Feed Regulating Screw

three 51061C

54026 9902 " Rocking Frame with two 453C 68022

.........

" “ " 54026 with 21506,54020,

54023, 54488 and 57225

57234 9882 Feed Rocking Frame Hinge Pin

....................................................

............................................

.................

...................................

...............................

57235 8985 « " » « « Bushing

453C 0901 « " , « .1 .Í gg,.

Screw.................................................................

453C 8901 Feed Rooking Frame Hinge Pin Set Screw..

68121 9897 Looper

........................................................................

131296 20693 " (self threading) with 590J and

30393

54027 9803 Looper Carrier with two 175E

175E 20693 “ “ Adjusting Screw 54227 9883 " “ Connection 54228 9083 " " " Shaft

.................................................................

.................................

..............................

.......................................

...................

54229 9883 » « » « Bushing

446C 8901 « « « . .

Set Screw...........................................................

49013 8904 Looper Carrier Connection Shaft Oil Pad

(braided cotton)

...............................................

54230 9083 Looper Carrier Driver with four 175E....

175E 8958 " " " Cap Screw

.........................

•54368 9897 “ Driving Shaft and Feed Lifting Ec centric with 227E and two 64315

...................

Note: When No. 54368 Is required for repairs, the

Ann Rotary Shaft must be returned to the factory to be adjusted to the new part,

54383

-------

Looper Driving Shaft and Feed Lifting

Eccentric 54368 with 54027, 54227,

*54034

-------

Looper Driving Shaft and Feed Lifting

Eccentric Bracket with 761E

54228 and 54230

..........................................

..........................

54080 9897 Looper Driving Shaft and Feed Lifting

Eccentric Bracket Bushing..............................

761E 8901 Looper Driving Shaft and Feed Lifting

Eccentric Bracket Bushing Set Screw.

948J 8958 Looper Driving Shaft and Feed Lifting

Eccentric Bracket Screw

.................................

64315 9870 Looper Driving Shaft and Feed Lifting

Eccentric Oil Hole Plug

...................................

___

No.

227E

40326

640E

54035

704W

1120C

38393

590J 54036 38456

1133E

64320

1133E 54326 54329

54327

1520J

54328

187E

68122 68123

857C 54108 54109 49092 54110

64330 25303 64331

1133E

38456

1133E

54039

640J 8958

11173

447C

1963

453C Б72Б7

Plate

8958

9900

8958

9897 8958

8958 20693 20693

9897

9082

8958

9882

8958

9882

.........

9882

9901

9882

8958

9897

8958

.........

—

9870

9902

9899

9882

8958

9882

8958

8985

8958

8985

8901

9882

Looper Driving Shaft and Feed Lifting

Name

Eccentric Oil Hole Plug Screw

........................

Looper Driving Shaft and Feed Lifting

Eccentric Oil Pad (braided cotton)..

Looper Driving Shaft and Feed Lifting

Eccentric Screw

Looper Holder with 1120C

................................................

......................................

" " Screw...................................................

" Set Screw " Thread Guard for 131296 " " " Screw for 131296

Needle Bar (hollow) with 857C

.........................................................

..............................

________

................................

" “ Bushing (lower)..............................

■ • " " Set Screw " " " (upper)

.............................

_____

" “ " “ Set Screw....

" " Connecting Link...................................

" " " " 54326 with

54327 and 54328

Needle Bar Connecting Link Hinge Stud...

» II n M и M

Nut

.....................................................................

...............................................

Needle Bar Connecting Stud with 211F and

two 187E............................................................

Needle Bar Connecting Stud Clamping

Screw..................................................................

Needle Guard.............................................................

" “ ' Clamp " Set Screw

................................................

...........................................................

Oil Tube.....................................................................

“ * Bracket.........................................................

" " Packing (felt)

...............................................

Oil Tube complete, for oiling Crank Con

necting Rod (upper bdbrlng). Nos.

49092 , 54108 and 54109

Presaer Bar with 25308

" " Ball, size 1/4 In " * Bushing (lower)

..................................

............................................

...................................

..................................

• * “ * Set Screw...

" * * (upper)

...........................

” ” “ " Set Screw...

" " Guide Bracket with 453C,640J

and 1963

............................................................

Presaer Bar Guide Bracket Adjusting

Screw

.................................................................

Presser Bar Guide Bracket Guide

...........................

" " " " " Set Screw " " " " Roller and Stud

" " " " Set Screw " " Lifter

....................................................

..............

PARTS FOR MACHINE No. 147-5

No.

67258

Plate 9882

447C 8958 1872 1250C

8985

9901

61047 9898

68208 9903 61075

46 OC

9901

68184 9903

16 ID 8958

602D 8958

38467

9902 38468 9901 26276 9898

68124 46099 68125

9890

190D 8958

574W

8958

1539W 9901

54381

9870

54242 9870

190D

8958 68126 9899 54042 9870

175E 8958

54043 9870 24292 9870

1019C 8958

54044 9870

1253C

8958

50150C 8958

2102 8964

51570C 8964

50326C

8964

59539

59534 59537

8964

Presser Bar Lifter Hinge Pin

............................................

'' " " " " Set Screw..

'' " “ Roller and Stud.............................

Name

” «0 Stop Screw

.........................

" " Lifting Bracket with 460C

and 1872

..................................................................

Presser Bar Lifting Lever

...............................................

“ " " " Connecting

Stud..........................................................................

Presser Bar Lifting lever Connecting

Stud Set Screw.........................................................

Presser Bar Lifting Lever Extension

................................

" " " " " Screw " " " “ Hinge Screw...

“ " Spring (flat)...............................................

.............................Stud

..............................................

" Foot Hinge Pin........................................................

" " Plate..........................................................

" " Shank

.......................................................

Presser Foot (hinged) complete, Nos.

26276, 46099 and 66124

Presser Foot Screw

...........................................................

Pressure Regulating Thumb Screw

.........................................

..................................

'' " " " Lock Nut

Slack Thread Controller....................................................

'' '' " Clamp " " " " Screw

...................................

.................

" " Regulator...................................................

" " " Holder with 175E

and two 50150C.......................................................

Slack Thread Regulator Holder Clamping

Screw

Slack Thread Regulator Holder Shaft

.......................................................................

..............................

" " " » Collar

with 1019C...............................................................

Slack Thread Regulator Holder Shaft

Collar Set Screw......................................................

Slack Thread Regulator Holder Shaft

Crank (forked) with 1253C

.....................................

Slack Thread Regulator Holder Shaft

Crank Set Screw

......................................................

Slack Thread Regulator Set Screw...................................

Tension (under thread) Disc

.............................................

“ '' " Regulating Thumb

Nut............................................................................

Tension (under thread) Screw Stud

„ « » r . 50326C

..................................

with 51570C.............................................................

Tension (under thread) Spring..........................................

" " " " Bushing

(large)......................................................................

No.

59538

17547

54045

376D

2102

12486

44224

68190

51570C

32572 54988 54046 54047

54048

624 C

68261

316F

1547J

50326C

59539

59535 59537

59538

131696

53225

19 OD 38284 64351

465C

38210

38211

46247

176D

68128

465C

Plate 8964

8964

8958 8964 9900

9900

8964

8964 8964

8964

8958

9901

8958

9901

8964

8964 8964

8964

20693

9899 8958 9898 9870 8958 9870 9870

9870

8958

9900 8958

Tension (under thread) Spring Bushing

Name

(small)......................................................................

Tension (under thread) Thread Guide

...............................

" (upper thread) Bracket.............................................

" " " " Screw....

“ " " Disc

.......................................

" " "Oil Cup Packing

(felt)..........................................................................

Tension (upper thread) Oil Cup Thread

Retainer.....................................................................

Tension (upper thread) Oil Cup complete.

Nos. 12486 and 44224..............................................

Tension (upper thread) Regulating Thumb

Nut............................................................................

Tension (upper thread) Releasing Disc...

“ " “ " Pin_____ " " " “ Shaft..

II N II « “

Crank with 624C

......................................................

Tension (upper thread) Releasing Shaft

Crank Link................................................................

Tension (upper thread) Releasing Shaft

Crank Set Screw................................................

Tension (upper thread) Releasing Shaft

Spring

.......................................................................

Tension (upper thread) Releasing Shaft

Stop Screw................................................................

Tension (upper thread) Releasing Shaft

Stop Screw Nut

Tension (upper thread) Screw Stud...................................

" " n t, 50326C

with 51570C

........................................................

.............................................................

Tension (upper thread) Spring...........................................

" " " " Bushing

(large).......................................................................

Tension (upper thread) Spring Bushing

(small)......................................................................

Tension (upper thread) Thread Guide

(double)....................................................................

Thread (under) Eyelet (back)

" " ff « Screw " " " (front)

" " Nipper Cam with 465C

............................................

......................

......................................

.....................

" " " " Set Screw...................

" " " Spring (lower)....

" “ " ” (upper)....

It H n » n

" " " " Screw

................

“ " Take-up with two 465C....

" " " Set Screw

............................

PARTS FOR MACHINE No. 147-5

No. Plate

38478 9899

54049 9902

965D 9901

46041 9899

190D 8958

38481

590D

9899 8958

38482 9899

207D

9901

64355 9899

64356

4600

9899

9901

68129 9898

1149C

68130

9901 9898

68131 9898

68132 9890

1698R

9890

59456 9898

68133 9890 68134 9896 68135

9898

60136

13218 9898

68137

68136

207D

540bl

211F

68139

742F

9898

9901 9899 8958 9892 9901

*15404-

15405

Thread (under) Take-up Staple with two

Name

each 590D and 38481

.......................................

Thread (under) Take-up Staple Bracket

with 460C..........................................................

Thread (under) Take-up Staple Bracket

Screw.................................................................

Thread (under) Take-up Staple Spring....

" ' » . » sgrew * ■ . . Thread Guard

n N N M N H

Screw.................................................................

Thread (under) Take-up Stripper

..........................

" " . « Screw... " “ " Thread Guard

(brass)...............................................................

Thread (under) Take-up Thread Guard

Steady Pin.........................................................

Thread (under) Take-up Thread Guard

Steady Pin Set Screw

Thread (upper) Nipper Body

'' " “ " Set Screw

“ " " Disc (Inside)

H II N H H

Washer (fibre)

Thread (upper) Nipper Disc (outside)....

" " nun

NR NR N M

Washer

.............................................................

Thread (upper) Nipper Roller

" * • .

.......................................

..................................

_____

......................

..................................................

................................

* " " Stud...................................

* " ” ’ 68135 with

68133 and 68134...............................................

Thread (upper) Nipper Stud Spring.......................

Thread (upper) Nipper complete. Nos,

1698R,13218,59456,68129 to 68132 and

68136.................................................................

Thread (upper) Nipper Thread Guide

■ ’ « . «

' " Take-up

............................................

“ “ "Set Screw

Throat Plate for 68120

“ " Screw

Trade Mark

..............................................................

.............................................

..................................................

...................

...............

" " Rivet........................................................

LIST OF PARTS COMPLETE

FOR

MACHINE No. 147-6

FOR AUTOMOBILE UPHOLSTERY. ONE NEEDLE,

ONE LOOPER. ALTERNATING PRESSER. INDEPEN

DENT UPPER AND UNDER FEED. CLEARANCE UNDER PRESSER FOOT 1/2 INCH. SPEED UP TO 2600 R.P.M., ACCORDING TO THE MATERIAL BEING STITCHED.

No. Plate Name

•68168

-------

Arm, upper and lower (solid) with 948J,

15404, 54034 and two 15405

42366 8901 Arm Oil Pad (braided cotton) for oiling

Arm Rook Shaft Front Bearing

56006 8901 Arm Oil Pad (braided cotton) for oiling

Arm Rock Shaft Intermediate Bearing.

56003 8985 Arm Oil Tube with 52045, for oiling

54326..................................................................

40217 9900 Arm Oil Tube with 52045, for oiling

54147..................................................................

11119 8901 Arm Oil Tube with 52045, for oiling

68137..................................................................

52045 8901 Arm Oil Tube Packing (braided cotton)...

68213 9904 " Rock Shaft............................................................

68214

.......... ................................. 68213 with 54004 and 54132

............................

......................

14 PARTS FOR MACHINE No. 147-6

No. Plate Name

64386 8901 Arm Rock Shaft Bushing (back)...............................................

446C 8901 " " '' " " Set Screw.

64388 8901 " " " '' (Intermediate)...

483C 8901 " ” " " " Set

52045 8901 Arm Rock Shaft Bushing Oil Pad (braided

54004 8901 Arm Rock Shaft Collar with two 453C......................

453C 8901 " '' " '' Set Screw

131072 20693 " " " Crank, back (ball bearing,

50083C 8901 Arm Rook Shaft Crank (back) Set Screw... 54132 9900 " " " " (front) With 448C

2117 8901 Arm Rock Shaft Crank (front) Pin

448C 8958 " " '' " '' Set Screw.. 54105 8901 " " " Flanged Bushing (front).. 52045 8901 " " " '' " " Oil

453C 8901 Arm Rock Shaft Flanged Bushing (front)

*68110 9904 Arm Rotary Shaft..............................................................

Note: When No. 68110 is required for repairs, the

Looper Driving Shaft and Feed Lifting Eccentric

must be returned to the factory to be adjusted

68212

54367 8985 Arm Rotary Shaft Bushing (front) ...................................

761E 8901 " ” " '' " Set

54007 8902 Arm Rotary Shaft Bushing (Intermediate). 54089 " " "

64508 8902 Arm Rotary Shaft Bushing (Intennedlate)

64805 8985 Лш Rotary Shaft Bushing (Intermediate)

4220 8901 Arm Rotary Shaft Bushing (Intermediate)

50084C 8901 Arm Rotary Shaft Bushing (Intermediate)

54450 20693 Arm Rotary Shaft Collar with two 1250C..

3258C 20693 " " " " Set Screw 54009 8902 " " '' Flanged Bushing 54090 -------- " ■' " " " 54000

58039 8902 Arm Rotary Shaft Flanged Bushing Oil

to the new part.

--------

Arm Rotary Shaft 68110 with 640E, 54113,

Screw.......................................................................

cotton)

.....................................................................

................................

solid) with two 50083C

and 453C..................................................................

Pad (braided cotton)

Set Screw

54383,54450,64351,64355,68211 and 131344

Screw.......................................................................

54007 with 64506 and 64805..................................

Oil Pad, long (braided cotton).................................

чЗ 1 Pad, shoi't (bi-alded cotton)

Set Screw (long)......................................................

Set Screw (sh'4't)

with 58039 and 64805

Pad, long (braided cotton)

................................................................

....................................................................

...........................................

...................................

................................................

............................

.....................................................

....................

..............................

.............................................

.......................................

No.

64805 8985

159F

49013 8904

14 4D 8901

15196

793D 9901

54010 8904

286D 8904

54210 9889

51283C 20693 68169 9904 68030 9900 49092 9870 54012 38419 3904

725J 8904

54013

54057 38419

725J

54058

68170

101 IF 8904

50473F 8904

68216 9904

1235F

54017

131344

896E

1057E 68350 20693 54218 8904

6575 8904

68171

14 2D 9901

54111

54113

896E

105'7E 8904 54023

Plate

8901

8902

9389 8904 8904

8904 8902

8904

8;:)04

•9882

PARTS FOR MACHINE No. 147-6

Arm Rotary Shaft Flanged Bushing Oil

Pad, short (braided cotton).......................................

Arm Rotary Shaft Flanged Bushing Screw..

" '' " Front Bearing Oil Pad

(braided cotton)........................................................

Arm Rotary Shaft Screw

" Side Cover (back) " " " “ Thumb Screw

" " " (front)

" " " " Thumb Screw........................

Balance Wheel, 2 5/8 In. pulley, with

8904

9905

8902

two 51283C

Balance Wheel Set Screw..................................................

Cloth Plate

'' “ Oil Tube with 49092....................................

" " " " Packing (felt) " " Slide (left)

" " " " Spring

Cloth Plate Slide (left) complete. Nos,

38419, 54012 and two 725J

Cloth Plate Slide (right).....................................................

“ " " " Spring

" “ “ " " Screw..

Cloth Plate Slide (right) complete. Nos.

38419, 54057 and two 725J......................................

Cloth Plate complete. Nos. 54013, 54058,

68030 and 68169

Cloth Plate Screw (left)

" " " (right) “ " Thread Guard " " '' " Screw

Crank Connecting Rod with 6575, 54218,

68350 and two each 896E^nd 1057E...

Crank Connecting Rod 54017 with 131072..

'' " " Cap (lower) Screw..

" " " Oil Cup " “ '' " " on Pad

(braided cotton)........................................................

Crank Connecting Rod Oil Cup Oil Pad

Stop Pin

Face Plate...........................................................................

" " Screw..............................................................

Feed Connecting Rod with 1057E and two

896E

Feed Connecting Rod 54111 with 54025....

“ '' " Cap Screw " '' " Clamping Screw " " “ Hinge Pin

..............................................................

.........................................................................

" » « (upper) Screw..

....................................................................

.........................................................................

Name

...................................................

........................................................

.......................

....................................................

...........................

....................................................

...............................

" “ Screw...

.....................................

.............................

......................................................

.....................................................

.............................................

..........................................

........................

................

................................

.....................

.................................

No. Plate

21506

457С

68120 9892

50073J 50429C 51061C

7071 8904

217D 8904

54025 8985

1103C

54488

54020 8902 57225 8904

453C 54026 9902 68022

57234 9882 57235 8985

453C

453C 8901

68172

68215

1239F 9895

68173 9895

50200C

68174

1283c

1708J

68175 9895

1239F

54111

68211

896E 8904

8904

9901 8904 8958

8904 9903

8901

9895

8958

9895 9895

9895

9895 8902

PARTS FOR MACHINE No, 147-6

Name

Feed Connecting Rod Hinge Pin Collar

with 457C

..........................................................

Feed Connecting Rod Hinge Pin Collar Set

Screw.................................................................

Feed Dog,15 teeth (10 teeth to the Inch)

for 68139

Feed Dog Screw

" " Stop Screw " Eccentric Body Set Screw " " Clamping Washer

" " » »

...........................................................

........................................................

................................................

................................

__________________________

..............................

Feed Eccentric (adjustable) with 1103C,

two each 217D, 7071 and three 51061C

Feed Regulating Screw.............................................

" (lower) Bar with 50429C and two

453C...................................................................

Feed (lower) Bar Connection

“ " " Hinge Pin

..................................

.................................

" * « n « Screw....

“ “ Roclclng Frame with Ujo 453C " " . . 54026 with

21506,54020,54023,54488 and 57225...

Feed (lower) Rooking Frame Hinge Pin....

H n II пни

Bushing

.............................................................

Feed (lower) Rocking Frame Hinge Pin

Bushing Set Screw............................................

Feed (lower) Rocking Frame Hinge Pin Set

Screw.................................................................

Feed (upper) Bar

......................................................

" " " 68172 with 11940,17490,

9525,68173 to 68175,68177,68178, two each 1283C, 1708J and three 1239P...

Feed (upper) Bar Cap Screw...................................

" " " Connecting Bracket with

50200C

..............................................................

Feed (upper) Bar Connecting Bracket Set

Screw.................................................................

Feed (upper) Bar Connecting Link

........................

" II I. I. » jjlnge

Screw.................................................................

Feed (upper) Bar connecting Link Hinge

Screw Nut.

Feed (upper) Bell crank

' “ " “ Cap Screw

........................................................

...........................................

...................

" " Connecting Rod with 1057E

and two 896E

....................................................

Feed (upper) Connecting Rod 54111 with

68176

.................................................................

Feed (upper) Connecting Rod Cap Screw...

No.

1057E

54147

54148

453C

24479

50200C

68176

1036C

11Э4С

1749C

9525

131711

68177

1239F

.54152

140123C

5095OC 51584C 14017

68240 68051

129E

68052

23866

1259C 54155 54369

465C

120690

50200C

68178

172E

68179 68225

PARTS FOR MACHINE No. 147-6

Plate 8904

9895 9895 8901 9895 8958

9896 8958 9901 9895

9895

20693

9895

20693

9896 9896 9896

9896

9903 9901 9896

9896

8958 9903 9896

Feed (upper) Connecting Rod Clamping

Screw........................................................................

Feed (upper) Connection...................................................

" “ " Pin " ' «в ggj 3(-j.g(y_ _ _

" " " Slide Bar " " * " " Set

Screw........................................................................

Feed (upper) Eccentric with two 1036C...

" " " Set Screw.................................

" " Lifting Regulating Screw... вин в в

Nut............................................................................

Feed (upper) Lifting Regulating Screw

Nut Washer...............................................................

Feed (upper) Lifting Regulator

" " " " Connecting

Link

Feed (upper) Lifting Regulator Connect

Feed (upper) Lifting Regulator Shaft

Feed (upper) Regulating Screw Stud

Feed (upper) Regulator

6956 9896

8958

9895

9901

9896

..........................................................................

ing Link Cap Screw

Crank with two 140123C.........................................

Crank Set Screw.......................................................

" " " H в _

AN Й H tt n

Washer......................................................................

" " » Bracket " “ " '' Screw " " " Crank with two

1259C.......................................................................

Feed (upper) Regulator frank Hinge Stud

(eccentric)................................................................

Feed (upper) Regulator Crank Set Screw..

" " Rock Shaft......................................................

" " n H Collar with two

465C

Feed (upper) Rock Shaft Collar Set Screw

Feed (upper) Rock Shaft crank (back) Set

Feed (upper) Rook Shaft Crank (front)

Feed (upper) Rock Shaft Pitman.......................................

.........................................................................

” " в П Crank (back)

with two 50200C

Screw

........................................................................

with 172E..................................................................

Feed (upper) Rook Shaft Crank (front)

Clamping Screw.......................................................

" ” в II H 68179 with

41F,1520J,14017,50950c and 51584C...

Name

.........................................

......................

.........................................

.................................................

................................

.....................................................

...........................

________

......................................................

No.

41F 9896

1520J 9901

68180 9891 68228

68230

203D 9901 57255 25303

46338

1133E

38456

1133E

54039

64CkJ

11173

447C

1963

453C

68181

50200C

66182

1872

68351

68183 54197

462C

68184

161C

66185

704C

20693

9903

8958

9903

8958

PARTS FOR MACHINE No. 147-6

Plate

Feed (upper) Rock Shaft Pitman Hinge

Screw

.......................................................................

Feed (upper) Rock Shaft Pitman Hinge

9892

9902 9899 9898 8958

9882 8958

8985

8958

8985

8958

8985

8901

9896

8958

9903 8985

9903

9898

8958

Screw Nut

Feeding Foot, for plain stitching

" " for welting, to feed on the

welt...........................................................................

Feeding Foot, for welting, to feed on

right hand side of the welt Feeding Foot Screw Lifting Presser Bar with 25303

" " " Ball, size 1/4 In...

" II » Bushing (lower)..........

" 11 . » 11

Screw

Lifting Presser Bar Bushing (upper)

11 II « II 11

Screw

Lifting Presser Bar Guide Bracket (low

er) with 453C, 640J and 1963

Lifting Presser Bar Guide Bracket (low

er) Adjusting Screw

Lifting Presser Bar Guide Bracket (low

er) Guide..................................................................

Lifting Presser Bar Guide Bracket (low

er) Guide Set Screw.................................................

Lifting Presser Bar Guide Bracket (low

er) Roller and Stud...................................................

Lifting Presser Bar Guide Bracket (low

er) Set Screw............................................................

Lifting Presser Bar Guide Bracket (up

per) with 50200C.....................................................

Lifting Presser Bar Guide Bracket (up

per) Set Screw..........................................................

Lifting Presser Bar Lifter..................................................

" " " " Roller and Stud " “ " Lifting Bracket with

462C and 1872.........................................................

Lifting Presser Bar Lifting Lever.....................................

necting Stud.............................................................

Lifting Presser Bar Lifting Lever Con

necting Stud Set Screw............................................

Lifting Presser Bar Lifting Lever Exten

sion (back)

Lifting Presser Bar Lifting Lever Exten

sion (back) Screw

Lifting Presser Bar Lifting Lever Exten

sion (front).............................................

Lifting Presser Bar Lifting Lever Exten

sion (front) Screw

................................................................

.......................................................................

............................

...............................................................

Name

......................................

..........................................................

.......................................

........................................

.........

.................................

.................................................

" Con

....................................................

................

....................................................

PARTS FOR MACHINE No. 147-6

No. Plate Name

802D 8958 Lifting Presser Bar Lifting Lever Hinge

Screw..................................................................

38467 9902 Lifting Presser Bar Spring (flat)......................................

38468 9901 " " II»

.................

68186 9891 " “ Foot, for plain stitching 68229 9892 “ " “ for welting

190D 8958 " " " Screw

............................

....................................

68121 9897 Looper........................................................................

131296 20693 Looper (self threading) with 590J and

38393

..................................................................

54027 9883 Looper Carrier with two 175E..........................

175E 20693 " " Adjusting Screw

54227 9863 " “ Connection

.............................

......................................

54228 9883 " " " Shaft.....................

54229 9883 n » • « Bushing.

446C 8901 " " « » .

Screw..................................................................

49013 8904 Looper Carrier Connection Shaft Oil Pad

(braided cotton)................................................

54230 9883 Looper Carrier Driver with four 175E....

175E 8958 " " " Cap Screw

..........................

*54368 9897 " Driving Shaft and Feed Lifting

Eccentric with 227E and two 64315...

Note: When No, 54368 is required for repairs, the

АШ Rotary Shaft must be returned to the factory

to be adjusted to the new part.

54383

-------

Looper Driving Shaft and Feed Lifting

Eccentric 64368 with 54027, 54227,

54228 and 54230................................................

*54034

-------

Looper Driving Shaft and Feed Lifting

Eccentric Bracket with 761E

...........................

54080 9897 Looper Driving Shaft and Peed Lifting

Eccentric Bracket Bushing

..............................

761E 8901 Looper Driving Shaft an<f Feed Lifting

Eccentric Bracket Bushing Set Screw.

948D 8958 Looper Driving Shaft and Feed Lifting

Eccentric Bracket Screw..................................

64315 9870 Looper Driving Shaft and Feed Lifting

Eccentric Oil Hole Plug....................................

227E 8958 Looper Driving Shaft and Feed Lifting

Eccentric Oil Hole Plug Screw.........................

40326 9900 Looper Driving Shaft and Feed Lifting

Eccentric Oil Pad (braided cotton)..

640E 8958 Looper Driving Shaft and Feed Lifting

Eccentric Screw.................................................

54035 9897 Looper Holder with 1120C....................................

704W 8958 " " Screw

.................................................

1120C 8958 " Set Screw..........................................................

38393 20693 “ Thread Guard for 131296

590J 20693 " " “ Screw for 131296

...............................

________

54036

38456

68187

54326 54329

54327

54328

68122

68123

54108

54109 49092 54110

No.

ПЗЗЕ

1133E

1520J

187E

857C

574W 1539W 54381 54242

190D

68126

54042

175E

54043 24292

1019C

54 044

1253C

50150C

2102

51570

50326C

59539

59534

PARTS FOR MACHINE No, 147-6

Plate Name

9897 Needle Bar (hollow) with 8570 9882 " " Bushing (lower)

8958 « n II II serew....

........................................

............................................

9898 " “ ” (upper)....................................

8958 “ " " " Set Screw....

9882 " " Connecting Link

_____

" " " " 54326 with

...........................................

54327 and 54328......................................................

9882 Needle Bar Connecting Link Hinge Stud... 9901 II I. . I, II II

9882 II » • with 211F and

two 187E..................................................................

8958 Needle Bar Connecting Stud Clamping

Screw........................................................................

9897 Needle Guard.............................................................................

9897 " " Clamp

........................................................

8958 " Set Screw...................................................................

-------- Oil Tube

--------

“ " Bracket

9870 " " Packing (felt)

..............................................................................

...............................................................

......................................................

9870 Oil Tube complete, for oiling Crank Con

necting Rod (upper bearing), Nos.

8958 Pressure Regulating Thumb Screw

49092, 54108 and 54109

.........................................

...........................................

9901 '' " II « [jy).

9870 Slack Thread Controller.............................................................

9870 '' " " Clamp

..................................

8958 ' " " "Screw 9899 " " Regulator

.....................................................

9870 " " " Holder with 175E

and two 50150C.......................................................

8958 Slack Thread Regulator Holder Clamping

Screw

9870 Slack Thread Regulator Holder Shaft

.......................................................................

.......................................

9870 ” " " " " Collar

with 1019C......................................■

......................

8958 Slack Thread Regulator Holder Shaft

Collar Set Screw......................................................

9870 Slack Thread Regulator Holder Shaft

Crank (forked) with 1253C

.....................................

8958 Slack Thread Regulator Holder Shaft

Crank Set Screw

8958 Slack Thread Regulator Set Screw

.....................................................

............................................

8964 Tension (under thread) Disc......................................................

8964 " " " Regulating Thumb

Nut............................................................................

8964 Tension (under thread) Screw Stud...........................................

..........

" " " " " 50326C

with 51570C.............................................................

8964 Tension (under thread) Spring...................................................

..........

No. Plate

59537 8964

59538 8964

17547

54045

376D

2102

12486

8964 8964 8958 8964 9900

44224 9900

68190 9900

51570C

32572 54988 54046

54047

54 me

624C

8964

8964 8964 8964 8964

8964

8958

68261 9901

316F

1547J

8958

9901

60326C 8964 59539

59535 59537

59538

131696

8964 8964

8964

20693

68078 9899

190D 38284 64351

4650 38210 38211

46247

176D

8958 9898 9870 8958 9870

9870 9870 8958

PARTS FOR MACHINE No, 147-6

Name

Tension (under thread)

Spring Bushing

(large).............................

Tension (under thread)

(small)

............................

Spring Bushing

Tension (under thread) Thread Guide

" (upper thread) Bracket..........................

II II II

II N II

II N H

" Screw....

Disc

...............................

Oil Cup Packing

(felt)................................

Tension (upper thread)

Oil Cup Thread

Retainer...........................

Tension (upper thread) Oil Cup complete.

Nos. 12486 and 44224..............................................

Tension (upper thread)

Nut

..................................

Tension (upper thread)

11 II II

II II II

n If H

Regulating Thumb

Releasing Disc...

" Pin " Shaft.,

II H

Crank with 6240...

Tension (upper thread)

Crank Link

.....................

Tension (upper thread)

Releasing Shaft

Crank Set Screw...

Tension (upper thread)

Releasing Shaft

Spring..............................

Tension (upper thread)

Stop Screw

......................

Tension (upper thread)

Releasing Shaft

Stop Screw Nut....

Tension (upper thread)

II M H

Screw Stud....................

'* " 50326C

With 51570C...................

Tension (upper thread)

■1 II If

Spring

...........................

“ Bushing

(large).............................

Tension (upper thread)

(small)

............................

Tension (upper thread)

(double)

Thread (under) Eyelet (back)

“ " " (front)

" " Nipper Cam with 465C...........................................

..........................

II II II

...................................................................

и II

II Я

II II It

Spring Bushing

Thread Guide

............................................

" Screw

“ Set Screw

'' " " Spring (lower)....

" (upper)....

" ” Sto-

Thread (under) Nipper Spring Screw................................

................

__________

....................

..................

PARTS FOR MACHINE No. W-6

No.

68128 9900

465C 8958

38478

54049 9902

965D 9901

46041

190D

38481

590D

38482

207D 9901

64355

64356

460C

68129 9898

1149C 9901 68130 9898 68131

68132

1698R 9898 59456 9898

68133 68134 68135 68136

13218 9898 68137

68138

207D

54051

211F

68139

742F

*15404

15405

Plate

9899

9B99

8958

9899

8958

9899

9901

9898

9898 9890 9898

9898 9901 9899 8958 9892 9901

Thread (under) Take-up with two 4650....

Name

'' '' " Set Screw

......................

" '' " Staple with two

each 590D and 38481..............................................

Thread (under) Take-up Staple Bracket

with 460C.................................................................

Thread (under) Take-up Staple Bracket

Screw

.......................................................................

Thread (under) Take-up Staple Spring....

li II II II 11

Screw

.......................................................................

Thread (under) Take-up Staple Thread

Guard

.......................................................................

Thread (under) Take-up Staple Thread

Guard Screw

............................................................

Thread (under) Take-up Stripper......................................

" '' " " Screw... " " " Thread Guard

(brass)......................................................................

Thread (under) Take-up Thread Guard

Steady Pin................................................................

Thread (under) Take-up Thread Guard

Steady Pin Set Screw...............................................

Thread (upper) Nipper Body

............................................

" " " " Set Screw....

'' '' " Disc (Inside)....................

'' '' " " " Washer

(fibre)

......................................................................

Thread (upper) Nipper Disc (outside)....

" "

H It M ll II n

..............................

Nut

Washer.....................................................................

Thread (upper) Nipper Roller.............................

" “ " " Hinge Pin.. " " " Stud

........................................

'' " " " 68135 with

68133 and 60134.....................................................

Thread (upper) Nipper Stud Spring

.................................

Thread (upper) Nipper complete, Nos.

1698R,13218,59456,68129 to 68132 and

68136.......................................................................

Thread (upper) Nipper Thread Guide

..............................

" " '' " " Screw

" " Take-up.....................................................

" " '' Set Screw...........................

Throat Plate for 68120......................................................

'' " Screw

........................................................

Trade Mark.......................................................................

" " Rivet

..............................................................

LIST OF PARTS COMPLETE

FOR

MACHINE No. 147-37

FOR AUTOMOBILE UPHOLSTERY. TWO NEEDLES, TWO LOOPERS. GAUGES Vs TO % INCH, IN STEPS OF 1/32 INCH.THE STANDARD GAUGE IS 1/4 INCH FOR REGULAR WORK AND s/e AND % INCH FOR RUG

WORK.ALTERNATING PRESSER.INDEPENDENT UPPER AND UNDER FEED. CLEARANCE UNCIER PRESSER FOOT 1/2 INCH. SPEED UP TO 2600 R. P. M., ACCORD

ING TO THE MATERIAL BEING STITCHED.

No.

■«■6B168

42366

56006

56003 40217

11119

52045 68213

Plate

Arm,

8901 Arm

3985 Arm

9900 8901 0901

9904

, upper and lower (solid) with 948J,

15404 , 54034 and two 15405 Oil Pad (bi-alded cotton) for oiling

Rook Shaft Front Bearing

Arm

Pad (braided cotton) for oiling

Rook Shaft Intermediate Bearing.

Arm

Tube with 52045,for oiling 54326

" " I. 1. " 68137

“ Packing (braided cotton)...

Rock Shaft................................................................

Name

.................................

...............................

u . „ , « 545^47

24 PARTS FOR MACHINE No. 147-37

PARTS FOR MACHINE No. 147-37

No. Plate Name

60214

64386 8901 Arm Rock Shaft Bushing (back)

446C 8901 " “ " “ "Set Screw.

64388 8901 " " " " (Intermediate)...

423C 8901 " “ " " " Set

52045 8901 Arm Rock Shaft Bushing Oil Pad (braided

54004 8901 Arm Rock Shaft Collar with two 453C

453C 8901 " " " " Set Screw

131072 20693 " “ '' Crank, back (ball bearing,

:>0u83(,' 8901 Arm Rock Shaft Crank (back) Set Screw...

54132 9900 " " " « (front) with 448C

2117 8901 Arm Rock Shaft Crank (front) Pin

448C 8958 « « » " " Set Screw.. 54105 8901 “ " " Flanged Bushing (front).. 52045 8901 " " " " " "

4flV 8901 Arm Rock Shaft Flanged Bushing (front)

«68110 9904 Arm Rotary Shaft..............................................................

68212

54367 8985 Arm Rotary Shaft Bushing (front)

761E 8901 « « « « n 3g^

54007 8902 Arm Rotary Shaft Bushing (intermediate). 54089

645C8 8902 Arm Rotary Shaft Bushing (Intermediate)

64805 89a5 Arm Rotary Shaft Bushing (Intermediate)

422C 8901 Arm Rotary Shaft Bushing (Intermediate)

50084C 8901 Arm Rotary Shaft Bushing (Intermediate)

54460 20693 Arm Rotary Shaft Collar with two 1258C..

1258C 20693 « » « « Screw 54009 8902 " “ " Flanged Bushing 54090

--------

Arm Rock Shaft 68213 with 54004 and

Note: When No. 68110 is required for repairs, the

Looper Driving Shaft and Feed Lifting Eccentric

must be returned to the factory to be adjusted

to the new part.

..........

Arm Rotary Shaft 68110 with 640E, 54113,

--------

и n

..........

" " " " " 54009

54132

.......................................................................

...............................................

Screw

.......................................................................

cotton)......................................................................

.solid) with two 50083C

and 453C..................................................................

Oil Pad (braided cotton)

Set Screw

.................................................................

54383,54450,64351,64355,68211 and

131344.....................................................................

Screw.......................................................................

54007 with 64508 and 64805..................................

Oil Pad, long (braided cotton).................................

Oil Pad, short (braided cotton)................................

Set Screw (long)......................................................

Set Screw (short)

with 58039 and 64805

..........................................

.....................................................

.............................................

......................

................................

.............................

......................

................

..............................

15 9F

14 4D

286D

725J

lOllF

896E

142D

Plato

8902

8985

8901 8904

8901 8902 8904

8904 8904 9889

20693

9904 9900 9870 8902 89048904

9902 8904

8904

8904 8904

8904

20693

No.

58039

64805

49013

15196

54010

54210

51283C

68169

68030 49092 54012 38419

54013

68191 38419

68192

68193

50473F

68216 9904

1235F

54017

131344

1057E 68350 54218

6575

68171

54111

54113

Arm Rotary Shaft Flanged Bushing Oil

Pad, long (braided cotton)........................................

Arm Rotary Shaft Flanged Bushing Oil

Pad, short (braided cotton).......................................

Arm Rotary Shaft Flanged Bushing Screw..

" " " Front Bearing Oil Pad

(braided cotton)........................................................

Arm Rotary Shaft Screw....................................................

" Side Cover (back) “ " " '' Thumb Screw

" " " (front)

" " " " Thumb Screw........................

Balance Wheel, 2 5/8 In. pulley, with

two 51283C..............................................................

Balance Wheel Set Screw

Cloth Plate.........................................................................

'' " Oil Tube with 49092

" II It « Packing (felt)...................................................

" " Slide (left)....................................................

" " “ " Spring " II « II II Screw

Cloth Plate Slide (left) complete. Nos.

38419, 54012 and two 725J

Cloth Plate Slide (right).....................................................

" " " " Spring.............................

“ " " " " Screw..

Cloth Plate Slide (right) complete. Nos.

38419, 68191 and two 725J

Cloth Plate complete, for 5/16 In. to

3/8 In. gauges, for 68198, Nos.

54013, 68030, 68169 and 68192..............................

Cloth Plate Screw (left).....................................................

” " " (right)

“ " Thread Guard.д............................................

" " " " Screw

8902

8904 0904

8904

9902 9901 8902

Crank Connecting Rod with 6575, 54218,

68350 and two each 896E and 1057E...

Crank Connecting Rod 54017 with 131072..

" '' " Cap (lower) Screw.. " " " “ (upper) Screw..

” " " Oil Cup “ " " “ " on Pad

(braided cotton)

Crank Connecting Rod Oil Cup Oil Pad

Stop Pin....................................................................

Face Plate

Feed Connecting Rod with 1057E and two

Feed Connecting Rod 54111 with 54025....

..........................................................................

" " Screw..............................................................

896E.........................................................................

Name

........................................................

....................................................

.................................................

.....................................

.............................................

.......................................................

..........................

...................................

............................

_______

.............................

................

No .

896E

1057E 54023 21506

457C

68194

50073J 50429C 51061C

7071

217D

54025

1103C 54488 54020 57225

453C 54026 68022

57234 57235

453C

68172 68215

1239F

66173

50200C

68174

1283C

1708J

68175

1239F

.54111

PARTS FOR MACHINE No. 14707

Plato

0904

8904

9882 0904

Feed Connecting Rod Cap Screw

" " '' Clamping Screw

" '' " Hinge Pin................................

„ II II II II Collar

with 457C.................................................................

8904

9893

9901 8904

8958

8904

8904 8985

Feed Connecting Rod Hinge Pin Collar Set

Screw

.......................................................................

Feed Dog,14 teeth (10 teeth to the Inch)

for 68198

.................................................................

Feed Dog Screw................................................................

" " Stop Screw.......................................................

" Eccentric Body Set Screw.........................................

" " Clamping Washer...........................

" " " '' Screw..,.

Feed Eccentric (adjustable) complete.

Nos. 1103, two each 217D, 7071 and

three 51061C

8904 9903 8902 8904 8901

9902

Feed Regulating Screw.....................................................

" (lower) Bar with 50429C and two 453C

Feed (lower) Bar Connection

" " " Hinge Pin.......................................

II “ " " " Set Screw.. ..

" " Rocking Frame with two 453C

—

" " " " 54 026 with

21506, 54020, 64023, 54488 and 57225

9882 0905

Feed (lower) Rocking Frame Hinge Pin

II II II II II II

Bushing....................................................................

8901

Feed (lower) Rocking Frame Hinge Pin

Bushing Set Screw...................................................

8901

9895

Feed (lower) Rocking Frame Hinge Pin Set

Screw

Feed (upper) Bar

.......................................................................

..............................................................

............................. 68172 with 1194C,1749C,

9525,68173 to 68175,68177,68178, two each 1283C, 1708J and three 1239F...

9895

8958

9895 9895

9895

9895 9695 8902

Feed (upper) Bar Cap Screw............................................

" " " Connecting Bracket with

50200C

....................................................................

Feed (upper) Bar Connecting Bracket Set

Screw

Feed (upper) Bar Connecting Link...................................

.......................................................................

I, II II II II Hinge

Screw

.......................................................................

Feed (upper) Bar Connecting Link Hinge

Screw Nut

................................................................

Feed (upper) Bell Crank

" " " " Cap Screw '' " Connecting Rod will) 1057E

and two 896E...........................................................

Name

....................................

.....................

...........................................................

...........................................

--------------------

...................................................

.......................

No.

Plate

68211

896E 8904

1057E

54147 54148

8904

9895 9895

453C 8901 24479 9895 50200C 8958

68176 9096

1036C

8950 1194C 9901 1749C 9895 9525 9895

131711

20693

68177 9895

1239F

54152

9895

140123C 20693

50950C 9896 51504C 9896 14017

68240

9896

68051 9903

129E

68052

9901 9896

23866 9896

1259C

8958 54155 9903 54369

465C

9896

8958

128690 9896

50200C 8958

68178 9895

172E 9901

PARTS FOR MACHINE No. 147-37 27

Name

Feed (upper) Connecting Rod 54111 with

68176........................................................................

Feed (upper) Connecting Rod Cap Screw...

" " " " Clamping

Screw........................................................................

Feed (upper) Connection...................................................

" “ " Pin

..............................

“ " “ " Set Screw...

" " " Slide Bar.....................

n II II II II

Screw........................................................................

Feed (upper) Eccentric with two 1036C...

" " " Set Screw.................................

'' " Lifting Regulating Screw...

II II II I. II

Feed (upper) Lifting Regulating Screw

Nut Washer...............................................................

Feed (upper) Lifting Regulator

.........................................

" " " " Connecting

Link...........................................................................

Feed (upper) Lifting Regulator Connect

ing Link Cap Screw

.................................................

Feed (upper) Lifting Regulator Shaft

Crank with two 140123C

.........................................

Feed (upper) Lifting Regulator Shaft

Crank Set Screw.......................................................

Feed (upper) Regulating Screw Stud

................................

" '■ “ " " Nut..

Feed (upper) Regulating Screw Stud Nut

Washer......................................................................

Feed (upper) Regulator......................................................

'' " " Bracket

" “ " " Screw

.....................................

________

” " " ^ Crank with two

1259C

......................'...............................................

Feed (upper) Regulator Crank Hinge Stud

(eccentric)

................................................................

Feed (upper) Regulator Crank Set Screw.,

" “ Rock Shaft.............................................

“ " " " Collar with two

465C

.........................................................................

Feed (upper) Rook Shaft Collar Set Screw

" " “ " Crank (back) with

two 50200C

..............................................................

Feed (upper) Rock Shaft Crank (back) Set

Screw........................................................................

Feed (upper) Rock Shaft Crank (front)

with 172E..................................................................

Feed (upper) Rook Shaft Crank (front)

Clamping Screw

.......................................................

PARTS FOR MACHINE No. 147-37

No. Plate 68179 9896 68225

4 IF

1520J 9901

68195

203D 9901

57255

25303 46338 9898

1133E

38456 9882

1133E 8958

54039 8985

64 OJ

11173 8985

447C 8958

1963 8985

453C 8901

68181

50200C 8958

68182

1872 68351 20693

9896

9894

9902 9899

8958

9896

9903

8985

68ia3 9903

54197 9898

462C 8958

68184 9903

161C

68185

704C

8958

9903

8958

Feed (upper) Rock Shaft Pitman

—

" " " " " 68179 with

4-lF, 1520J, 14017, 509Б0С and -81584C

Feed (upper) Rock Shaft Pitman HIn^c

Screw

.......................................................................

Feed (upper) Rock Shaft Pitman Hlnpe

Screw Nut

Feeding Foot, 20 teeth (16 teeth to the

Inch) for 3/16 in. to 3/8 In. gauges Feeding Foot Screw Lifting Presser Bar with 25303

" '' " Ball, size 1/4 In...

” " " Bushing (lower)....................

,, ,, ,, I. ,,

Screw

Lifting Presser Bar Bushing (upper)

Lifting Presser Bar Guide Bracket (low

Lifting Presser Bar Guide Bracket (up

Lifting Presser Bar Lifter..................................................

Lifting Presser Bar Lifting Lever.....................................

Lifting Presser Bar Lifting Lever Con

Lifting Presser Bar Lifting Lever Rxten-

Lifting Presser Bar Lifting Lever Exten

.......................................................................

" " " " " Set

Screw

.......................................................................

er) with 4530, 640J and 1У63

er) Adjusting Screw.................................................

er) Guide..................................................................

er) Guide Set Screw

er) Roller and Stud

er) Set Screw............................................................

per) with 50200C.....................................................

per) Set Screw

'' " " '' Roller and Stud " “ " Lifting Bracket with

462C and 1872

" " " '' " Connect

ing Stud

necting Stud Set Screw

slon (back)

sion (back) Screw....................................................

sion (front)...............................................................

sion (front) Screw....................................................

Name

......................................

................................................................

..........................................................

........................................

................................

.................................

................................................

..................................................

.........................................................

........................................................

...........................................

...............................................................

No. Plate Name

802D 8958 Lifting Presser Bar Lifting Lever Hinge

Screw

38467 9902 Lifting Presser Bar Spring (flat)

.................................................................

.....................................

38468 9901 ” n n II ..................

68196 9893 " “ Foot, for 3/16 In. to 3/8

190D 8958 Lifting Presser Foot Screw

In. gauges

..........................................................

.......................................

131425 20693 Looper (back) closed eye...........................................

Note: When ordering No. 131425, state gauge of

machine for which It Is required.

1147C 9883 Looper (back) Set Screw...................................................

131426 20693 " (front) closed eye

.............................................

Note: When ordering No. 131426, state gauge of

machine for which it Is required.

1120C 8958 Looper (front) Set Screw..................................................

54027 9883 " Carrier with two 175E

17.5E 20693 " " Adjusting Screw 54227 9883 “ " Connection 54228 9883 “ " " Shaft

......................................

.................................

..........................................

............................

54229 9883 n « « Bushing.

446C 8901 « « . » »

Set Screw

...........................................................

49013 8904 Looper Carrier Connection Shaft Oil Pad

(braided cotton)................................................

54230 9883 Looper Carrier Driver with four 175E

-------------

175E 8958 " " " Cap Screw..........................

*54368 9897 " Driving Shaft and Feed Lifting Ec

centric with 227E and two 64315

....................

Note: When No. 54368 Is required for repairs, the

Arm Rotary Shaft must be returned to the factory to be adjusted to the new part.

54383

-------

Looper Driving Shaft and Feed Lifting

Eccentric 54368 with 54027, 54227,

»54034

-------

Looper Driving Shaft and Feed Lifting

Eccentric Bracket with 761E

54228 and 54230/.

.............................................

...........................

54080 9897 Looper Driving Shaft and Feed Lifting

Eccentric Bracket Bushing

..............................

761E 8901 Looper Driving Shaft and Feed Lifting

Eccentric Bracket Bushing Set Screw.

948J 8958 Looper Driving Shaft and Feed Lifting

Eccentric Bracket Screw..................................

64315 9870 Looper Driving Shaft and Feed Lifting

Eccentric Oil Hole Plug....................................

227E 8958 Looper Driving Shaft and Feed Lifting

Eccentric Oil Hole Plug Screw

........................

40326 9900 Looper Driving Shaft and Feed Lifting

Eccentric Oil Pad (braided cotton)..

640D 8958 Looper Driving Shaft and Feed Lifting

Eccentric Screw

................................................

No.

54061

704W

64319

131045

PARTS FOR MACHINE No, 147-37

Plate

Holder with 1120C and 1147C

9883 8958

9397 Needle Bar

20693

Looper

Needle Bar

Screw

(hollow)...................................................

complete, for 3/16 In. to 3/8

In. gauges, Nos. 64319 and 131044...

Note: When ordering No. 131045, state gauge required.

38456

1133E 8958

68187

1133E 8958

54326

54329

9882

9898

9882

Needle Bar Bushing (lower).............................................

" " " " Set Screw....

" " " (upper)..............................................

" " " " Set Screw

" “ Connecting Link..........................................

" " " " 54326 with

54327 and 54328

54327

9882

1520J 9901

54328

9882

187E 8958

131044 20693

Needle Bar Connecting Link Hinge Stud...

" " “ " '' " Nut

" " " Stud with 211F and

two 187E

.................................................................

Needle Bar Connecting Stud Clamping

Screw

.......................................................................

Needle Clamp with two 1498F, for 3/16 In.

to 3/8 In. gauges

: Whe

Note

68197 9898

68123 9897

1498F 8958 54108 54109 49092

—

9870

54110 9870

ordering No. 131044, state gauge required.

Needle Guard, for 3/16 In. to 3/8 In.

gauges

......................................................................

Needle Guard Clamp

" Set Screw................................................................

Oil Tube............................................................................

" " Bracket...............................................................

“ Packing (felt)

Oil Tube complete, for oiling Crank Con

necting Rod (upper bearing). Nos.

49092, 54108 and 54109.........................................

574W

8958

1539W 9901 54381 9870 54242

190D

9870

8958 68199 9899 54042 9870

Pressure Regulating Thumb Screw..................................

" ” " " Lock Nut

Slack Thread Controller

" " " Clamp....................................

" " " " Screw

" " Regulator.....................................................

" " " Holder with 175E

and two 50150C.......................................................

175E 8958

64043

9870

Slack Thread Regulator Holder Clamping

Screw

.......................................................................

Slack Thread Regulator Holder Shaft

24292 9870

Collar with 1019C

1019C 8958

Slack Thread Regulator Holder Shaft

Collar Set Screw

54044 9870

Slack Thread Regulator Holder Shaft

Crank (forked) with 1253C

1253C

3958

Slack Thread Regulator Holder Shaft

Crank Set Sci’ew

Name

........................

................................................

______

.....................................................

......................................................

........................................................

.....................................................

...................................................

.................

..............................

..........................................

.............................................

............................

............................................

PARTS FOR MACHINE No. 147-37

No. Plate Name

50150C 3958 Slack Thread Regulator Set Screw

2102 3964 Tension (under thread) Disc

.............................................

.......................................................

51570G 8964 " '' '' Regulating Thumb

Nut

50326C 8964 Tension (under thread) Screw Stud ^9539

--------

59534 8964 Tension (under thread) Spring

............................................................................

............................................

............................................... 50326C

with 51570C

.............................................................

............................

59537 8964 " " " ” Bushing

(large).......................................................................

59538 0964 Tension (under thread) Spring Bushing

(small).......................................................................

17547 8964 Tension (under thread) Thread Guide

.............

54070 8996 " (upper thread) Bracket...........................

376D 8958 " n .1 « Screw

2102 8964 ” “ " Disc

.............................

61570C 8964 " “ “ Regulating Thumb

Nut.............................................................................

32572 8964 Tension (upper thread) Releasing Disc... 54988 8964 " " " " Pin

_____ 54071 9889 " “ " " Shaft.. 54047 8964 " “ " " "

Crank with 624C.......................................................

54048 8964 Tension (upper thread) Releasing Shaft

Crank Link................................................................

624C 8956 Tension (upper thread) Releasing Shaft

Crank Set Screw

.......................................................

66261 9901 Tension (upper thread) Releasing Shaft

Spring........................................................................

316F 3958 Tension (upper thread) Releasing Shaft

Stop Screw................................................................

1547J 9901 Tension (upper thread) Releasing Shaft

Stop Screw Nut.........................................................

50326C 8964 Tension (upper thread) Strew Stud 59539

--------

" H « n II 50326C

.....................

with 51570C..............................................................

59535 8964 Tension (upper thread) Spring.............................

59537 8964 " " " " Bushing

(large).......................................................................

59538 8964 Tension (upper thread) Spring Bushing

(small)......................................................................

131696 20693 Tension (upper thread) Thread Guide

(double)....................................................................

53225 9899 Thread (under) Eyelet (back)

lOOD 8958 " '' " " Screw 54072 9898 " " " (front) 64351 9370 " " Nipper Cam with 465C

4G5C 3958 " " " " Set Screw 33210 9370 " '' " Spring (lower) 38211 9070 " " " " (upper)

...................................

....................

....................................

................

......................

____________

_________

PARTS FOR MACHINE No. 147-37

No.

46247

176D

60128

465C

54435

54049

965D

46041

190D

38481

590D

38482

2ü'7D

64355

64356

460C

66129

1149C 68130 68131

68132

1698R

59456

60133 66134 681^^5 G8i:5C

13218

68137

60138

207D

54Ü75

21 IF

68190

74 2F

*15404

15405

f'late 9870

8958 9900 0950 9099

9902

9901

9899

8058

9899

8958

9899 9901 9899

9899

9901

9898 9901 9098 9898

9898 9898 9898

9898 9098 9898

9898

9890 9901 9899 0958 9893

9901

Tliroad (under) Nipper Spring (upper)

Name

Stop..........................................................................

Thread (under) Nipper Spring Screw

...............................

" “ Take-up with two 465C....

“ " '' Set Screw “ “ " Staple with 590D

and 38481

................................................................

Thread (under) Take-up Staple Bracket

with 460C.................................................................

Thread (under) Take-up Staple Bracket

Screw

Thread (under) Take-up Staple Spring----------------------

.......................................................................

tl tl n

Screw

.......................................................................

Thread (under) Take-up Staple Thread

Guard........................................................................

Thread (under) Take-up Staple Thread

Guard Screw

............................................................

Thread (under) Take-up Stripper......................................

" " " " Screw... " " " Thread Guard

(brass)......................................................................

Thread (under) Take-up Thread Guard

Steady Pin................................................................

Thread (under) Take-up Thread Guard

Steady Pin Set Screw...............................................

Thread (upper) Nipper Body

............................................

" “ '' '' Set Screw....

“ '' " Disc (inside) " " " “ " Washer

(fibre)

Thread (upper) Nipper Disc (outside)....

Thread (upper) Nipper Roller.

......................................................................

„ „ I, It II jjyj-

Washer

............................................

It II •! n

" '' ” Stud

................................

" " " ” 68135 with

68133 and 68134.....................................................

Thread (upper) Nipper Stud Spring

.................................

Thread (upper) Nipper complete, Nos.

1690R,13218,59466,68129 to 68132 and

68136.......................................................................

Thread (upper) Nipper Thread Guide...............................

" " " " " Screw

" " Take-up............................................

" " " Set Screw

...........................

Throat Plate, for 5/16 in. to 3/8 In.

gauges, for 68194

....................................................

Throat Plate Screw............................................................

—

Trade Mark

—

.......................................................................

" " Rivet

............................................................

......................

....................

Hlnge Pin..

FITTINGS FOR 147-6 MACHINE

FOR PLAIN STITCHING

No.

68120

68180 68106 68139

Plate 9891

9891

9891 9891

Feed Dog,15 teeth (10 i

for 68139........................

Feeding Foot............................

Lifting Presser Foot..

Throat Plate for 68120

Name

FOR WELTING

68120

68226 68230

68229 68139

9892

9892 9892

Feed Dog,15 teeth (10 teeth to the Inch)

for 68139

Feeding Foot, to feed on the welt

..................................................................

......................................

“ '' to feed on right hand side

of the welt.................................................................

Lifting Presser Foot

...........................................................

Throat Plate for 68120.......................................................

FITTINGS FOR 147-37 /AACHINE

FOR PLAIN STITCHING

No. Plate Name

68194 9893 Feed Dog,14 teeth (10 teeth to the Inch)

68195 9893 Feeding Foot, 20 teeth (16 teeth to the

68196 9893 Lifting Presser Foot, for 3/16 In. to

68198 9893 Throat Plate, for 5/16 In, to 3/8 In.

68241 9894 Feed Dog,16 teeth (12 teeth to the Inch)

68195 9894 Feeding Foot, 20 teeth (16 teeth to the

68242 9894 Lifting Presser Foot, for 1/4 In. to 3/8

68243 9894 Throat Plate, for 1/4 In. to 5/16 In.

for 68198..................................................................

Inch) for 3/16 In. to 3/8 in. gauges

3/8 In. gauges............................................................

gauges, for 68194

.....................................................

FOR STAYING SEAMS

for 68243

Inch) for 3/16 In. to 3/8 In. gauges

In. gauges..................................................................

gauges for 68241.......................................................

..................................................................

+ 39 hidden pages