SINGER 147-4 User Manual
Form 19416
( 240 )
Printed in U. S. A,
LIST
OF
PARTS
MACHINE No. 147-4
THE SINGER MANUFACTURING COMPANY
INSTRUCTIONS FOR OILING
Before starting the machine, fill all oil reservoirs
and apply oil to the connecting rod and all oil holes. When
the machine Is In continuous use, It should be thoroughly
oiled at least twice a day.
INDEX
Page
Accessories........................................................................................................ 14
Use either Singer "OIL FOR HIGH SPEED SEWING MACHINES
(Cloth and Leather)" for general use, or "STAINLESS OIL FOR
HIGH SPEED SEWING MACHINES" where a stainless oil Is de
sired .
Copyrighl, U. S. A., 1939 and 1940
by The Singer Manufacturing Co.
All Rights Reserved for all Countries
Belt Guard......................................................................................................... 14
Binders (Transverse)........................................................................................ 14
Foot Lifter Parts............................................................................................... 15
Knee Lifter Parts.............................................................................................. 16
Machine Base.................................................................................................... 16
Machine Base Oil Drain Jar............................................................................ 17
Machine No. 147-4.............................................................................................. 5
Numerical List of Parts.................................................................................... 19
Tape Holder...................................................................................................... 17
Thread Unwinder............................................................................................. 18
INSTRUCTIONS FOR ORDERING
In ordering from this list, use CttiLY the part NUMBER In the
FIRST column.
The number stamped on a Sewing Machine Part Is In every case
the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be used
when ordering the combination.
Each number always Indicates the SAME PART In whatever list
It appears, or for whatever machine.
Tho letters after some of the numbers Indicate the style of
finish only, as follows:
A-Hardened, Pollslied, Nickel Plated and Buffed
A.A-Buffed and Chromium Plated
A.B-Hardened, Polished, Buffed and Chromium Plated
A.C-Brown Baking Enaifvjl Finish
A.D-aray Baking Enamel Finish
A.E-Hardened, Bright Rumbled and Nickel Plated
A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated
B-Polishod, Nickel Plated and Buffed
C-Hardened Only
C.R-Hardened and Merllzed
D-Pollshed Only
E-Soft, Not Polished
F-Hardened and Polished
F.J-Hardoned, Polished and Nickel Plated
G-Brlght Rumbled and Nickel Plated
H-Blued
J-NIckel Plated Only
K-Hardened and Nickel Plated
L-Brass Plated
M-Oxldlzed
N-Japanned, Dull
P-Japanned, Bright
P.P-Wrlnkle Finish
R-Merllzed
S-Cadmium Plated
T-Copper Plated
T.A-Hardened, Polished, Copper and Nickel Plated and Buffed
T.B-Copper and Nickel Plated and Polished
T.J-Coppor and Nickel Plated Only
T.K-Hardened, Copper and Nickel Plated
T.L-Copper and Brass Plated
T.M-Copper Plated and CKldlzed
U-21nc Plated
V-Sllver Plated
W-Pollahed and Nickel Plated
X-Black Oxide, for Iron and Steel
X.C-Hardened and Black Oxide, for Iron or Steel
Y-Black Nickel Plated Ckily
Z-Chromlum Plated
Z.A-Hardened,Pollstiod,Nickel Plated,Buffed and Chromium Plated
Z.B-Polished, Nickel Plated, Buffed and Chromium Plated
Z.C-Hardened and Chi’omlum Plated
Z.D-Poilshed and Chromium Plated
Z.Q-Brlght Rumbled, Nickel Plated, Bright Rumbled and Chromium Plated
Z.J-NIckel and Chromium Plated
Z.T-Copper and Chromium Plated
These letters MIX.>T BE USED when they appear in the list; and
AFTER the number as In the Hat.
In this series:
The figures In tlie second column refer only to the plates,
Illustrating the parts, and ai*e NOT TO BE USED In ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
1 to 1500, 50001 to 51500 and 140001 to 142000
are Screw Numbers
1501 to laOO and 51501 to 51800 are Nut Numbers
1601 to 2000 and 51901 to 52000 are Holler Numbers
2001 to 50000 and 52001 to 140000 and 142001 to
190000 are Sewing Machine Parts, 190001 and upward
are numbei’s of Electrical Parts,
LIST OF PARTS COMPLETE
FOR
MACHINE No. 147-4
For Stitching Button Stays on Knit Underwear. One needle,
one looper. Transverse Binder. Gathering feed. Speed up to
3500 R. P. M., according to the material being stitched.
No. Plate
*54304
Arm, upper and lower (solid) with 948J,
15404 , 54034 and two 15405
42366 20622 Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Front Bearing..........................
56006 20622 ArmOil Pad (braided cotton) for oiling
Arm Rock Shaft Intermediate Bearing.
56003 20622 Arm Oil Tube with 52045, for oiling
Needle Bar Connecting Link
52045
54002
20622
20622
54079
64386 20622
4460
64388
423C
20622
20622
20622
Arm
Oil Tube Packing (wick)
<1
Rock Shaft............................................................
N
" " 54002 with 54004 and 64255
u
" " Bushing (back)
*'
" " " " Set Screw..
tl
" ” " (Intermediate)....
“ “ " Set
Screw..............................................................................................................................
Name
..............................
..............................
.....................................
..........................................
PARTS FOR MACHINE No, 147-4
PARTS FOR MACHINE No. 147-4
761E
422C
159F
144D
Plate
20622
20622
20622
20623
20623
20622
20622
20622
20622
20622
20622
20623
Note: Wtien
—
20623
20623
20623
20623
20623
20623
20623
20623
20623
20623
20623
20623
20623
20623
20623
20625
No.
5204-5
54004
453C
131072
50083C
64255
2117
453C
54105
52045
453C
54359
54385
54367
54007
54089
64508
64805
50084C
54450
125 ac
54009
54090
58039
64805
49013
15196
51224W 20625
Arm Rock Shaft Bushing Oil Pad (wick)...
Name
" " " Collar with two 453C............................................
" " * " Set Screw
..............................................................
" ' " Crank (back) (ball bear-
Ing, solid) with two 50083C
Arm Rook Shaft Crank (back) Set Screw...
• “ " " (front) with 453C..
" " • " " Pin
.......................................................................
...............................
" " " “ " Set Screw..
" " " Flanged Bushing (front)...
Pad (wick)............................................................
Arm Rook Shaft Flanged Bushing (front)
Set Screw..............................................................
Arm Rotary Shaft
No. 54359 Is required for repairs, the
Looper Driving Shaft and Feed Lifting Eccentric
1 returned to the factory to be adjusted
must be
to the
new part.
Arm Rotary Shaft 54359 with 640E, 54113,
54317,54383,54450,64351,64355 and
131344..................................................................
Arm Rotary Shaft Bushing (front)
........................................................
fl « n H n
54007 with 64508 and 64805
Arm Rotaiy Shaft Bushing (Intermediate)
Oil Pad, long (braided cotton)
Arm Rotary Shaft Bushing (intermediate)
Oil Pad, short (braided cotton)..........................
Arm Rotary Shaft Bushing (Intermediate)
Set Screw (long)
Arm Rotaiy Shaft Bushing (intermediate)
Set Screw (short).................................................
Arm Rotary Shaft Collar with two 1258C..
..................................................
n tt Jt « «t "Oil
.............................
" ” * " (intermediate).
..............................
...........................
" ^ " " Set Screw.............................................................
" " Flanged Bushing.....................................................
« . « II « 54009
with 58039 and 64805..........................................
Arm Rotaiy Shaft Flanged Bushing Oil
Pad, long (braided cotton)
Arm Rotary Shaft Flanged Bushing Oil
Pad, short (braided cotton)
Arm Rotary Shaft Flanged Bushing Screw..
V • • Front Bearing Oil Pad
(braided cotton)..................................................
Arm Rotary Shaft Screw
" Side Cover (back)
" " " * Thumb Screw
..................................................
.................................
................................
............................................
...............................................
" " “ " ^ Set Screw
No. Plate
54010
51224W
64259 20623
51283C 20623
54305
46432 20624
742F
54309 20624
49092 20624
54306 20624
46434
725J
38416
725J
53216
1443B 20624
54307
54012 20624
38419 20624
725J 20624
54013
54308 20624
101 IF
50473F 20624
54017 20623
131344
896E
1057E 20623
68350
54218 20623
6575 20623
64269
46111 20625
51224W 20625
54019
54020 20627
54310
24292 20626
1019C
20625
20625
20624
20624
20624
20624
20624
20624
20624
20624
_____
20623
20623
20625
20626
20626
20626
Name
Arm Side Cover (front)
“ " " *' Thumb Screw
Balance Wheel, 2 In. dlam. pulley with
two 51283C
Balance Wheel Set Screw
Cloth Plate
Cloth Plate Slide (large) Spring (right)
Cloth Plate Slide (large) Steady Plate..
Cloth Plate Slide (large) complete, Nos.
Cloth Plate Slide (small)
Cloth Plate Slide (small) complete. Nos.
Cloth Plate complete. Nos. 53216, 54013,
Cloth Plate Screw (left)................................................
Crank Connecting Rod with 6575, 54218,
Crank Connecting Rod 54017 with 131072..
Crank Connecting Rod Oil Pad Stop Pin...
Face Plate......................................................................
Feed (back) Bar with 50429C and two 453C
Feed (back) Bar Hinge Pin (eccentric)
....................................................................
" * Bracket.....................................................
" " " Screw
" " Oil Tube with 49092................................
" n « » Packing (felt)
" " Slide (large)..............................................
“ " " " Spring (left).
n H tl N N «
Screw....................................................................
n N H It It It
Screw....................................................................
n A « II II n
Screw....................................................................
38416, 46434, 54306 and four 725J...
“ *' " " Spring....................
" " " *' Screw..
38419, 54012 and two 725J
54305, 54307, 54309 and two 1443B...
" “ " (right)..........................................
68350 and two each 896E and 1057E...
" » » Q^p (xower) Screw..
" «on (upper) Screw..
" ’ ^ Oil Cup
“ II o » pg^(j (braided
cotton)...................................................................
" " Pin...............................................................
" * Thumb Screw.............................................
" « » Connection......................................
" * “ Hinge Pin (eccentric)...
...............................................
with 1019C
Collar Set Screw
...............................................
...................
..........................................................
............................................
........................................
.....................
..............................................
.................................
..........................
“ Collar
...........................................................
..................................................
PARTS FOR MACHINE No. 147-4
PARTS FOR MACHINE No. 147-4
No. Plate
4530 20626
54111
54113
896E 20623
1057E
54023 20626
21506 20626
54363
504290
54311
1520E
54312 20626
16800
42290
46443 20631
54313 ' 20623
54314 20623
50571D
502000
500830
54315
54316
1057D
54317
510610 20623
20623
20623
20626
4570
20631
157J 20631
20626
20626
20626
21F
20626
20626
26F
20626
20626
190J 20631
20623
20623
20623
20623
20623
20623
20623
4480
20623
Feed (back) Bar Hinge Pin Set Screw
" " Connecting Rod with 1057E and
two 896E..............................................................
Feed (back) Connecting Rod 54111 with
54025....................................................................
Feed (back) Connecting Rod Cap Screw....
" " ” " Clamping
Screw
...................................................................
Feed (back) Connecting Rod Hinge Pin....
It II II It tt <1
Collar with 457C.................................................
Feed (back) Connecting Rod Hinge Pin
Collar Set Screw
Feed (back) Dog, 8 teeth (16 teeth to
the Inch) for 54364.............................................
Feed (back) Dog Screw...............................................
" " ” Stop Screw....................................
" (front) Bar............................................................
” " " Hinge Screw...............................
" " « " « Nut
" " Connecting Rod
" " II n Hinge Screw.
If fl II II n H
Nut........................................................................
Feed (front) Connecting Rod Hinge Screw
Nut Washer
Feed (front) Dog, 12 teeth (16 teeth to
the Inch) for 54364.............................................
Feed (front) Dog Screw...............................................
" *' Lifting Rock Shaft
" " " n n Crank
(back) forked, with 50083C, 50200C
and 50571D
Feed (front) Lifting Rock Shaft Crank
(back) Adjusting Screw.....................................
Feed (front) Lifting Rock Shaft Crank
(back) Position Screw........................................
Feed (front) Lifting Rock Shaft Crank
(back) Set Screw
Feed (front) Lifting Rock Shaft Crank
(back) Slide Block (two pieces)
Feed (front) Lifting Rock Shaft Crank
(front) with two 1057D
Feed (front) Lifting Rock Shaft Crank
(front) Clamping Screw
Feed (front) Lifting Rock Shaft E’.ccen-
trlc with two 448C..............................................
Feed (front) Lifting Rock Shaft Eccen
tric Set Screw......................................................
Feed Eccentric Body Set Screw
Name
.................................................
.........................................................
.........................................................
................................................
.......................
......................
......................................
.................................
.........................
...............................
....................................
.................................
..
No.
7071
217J
54025
1103C
54026
57234
57235
453C
453C
53202
53203
54027
175E
54227
54228
54229
446C
49013
54230
175E
*54368
»54383
*54034
54080
76 IE
948J
64315
227E
40326
640E
54035
Plate Name
20623 Feed Eccentric Clamping Washer.......................................
20623 " " " " Screw
20623 Feed Eccentric (adjustable) complete,
20623 Feed Regulating Screw
20626 " Rocking Frame with two 453C
20626 " ’■ " Hinge Pin..............................
20626 n It II It n Bushing
20626 It » II * « « ggh
20626 Feed Rocking Frame Hinge Pin Set Screw..
20631 Looper
20631 " 53202 with 229D and 52661
20627 " Carrier with two 175E.........................................
20627 " " Adjusting Screw
20627 " " Connection
20627 " ” * Shaft
20627 II . * n Bushing.
20627 II n n « II
20627 Looper Carrier Connection Shaft Oil Pad
20627 Looper Carrier Driver with four 175E....
20627 " *' " Cap Screw
20627 " Driving Shaft and Feed Lifting
Note
When No. 54368 Is required for repairs, the
Arm Rotary Shaft must be returned to the factory
to be adjusted to the new part.
-------
Looper Driving Shaft and Feed Lifting
-------
Looper Driving Shaft and Feed Lifting
20627 Looper Driving Shaft and Feed Lifting
20627 Looper Driving Shaft and Feed Lifting
20627 Looper Driving Shaft and Feed Lifting
-------
Looper Driving Shaft and Feed Lifting
20627 Looper Driving Shaft and Feed Lifting
20627 Looper Driving Shaft and Feed Lifting
20623 Looper Driving Shaft and Feed Lifting
20627 Looper Holder with 1120C
NOS.1103C and two each 217J,7071 and
51061C..................................................................
.................................................
...........................
Screw....................................................................
..........................................................................
.........................
.................................
....................................
Set Screw
(braided cotton)
Eccentric with 227E and two 64315...
Eccentric 54368 with 54027, 54227,
54228 and 54230..................................................
Eccentric Bracket with 761E
Eccentric Bracket Bushing.................................
Eccentric Bracket Bushing Set Screw.
Eccentric Bracket Screw
Eccentric Oil Hole Plug......................................
Eccentric Oil Hole Screw
Eccentric Oil Pad (braided cotton)..
Eccentric Screw
.............................................................
..................................................
..........................
.............................
....................................
...................................
..................................................
..................................................
_______
_____
....................
10
PARTS FOR MACHINE No. U(7-4
PARTS FOR MACHINE No. IA7-A
11
No.
704J
52661
46105
229 D
1120C
54036
38456
1133E
64320
1133E
54326
54329
54327
1520J
54328
187E 20628
54318
54038
176J
217F
857C
54108
54109
49092
54110
64330
25303
64331
1133E
38456
1133E
54039
64CJ 20628
11173
4470
1963
4530
57257
57258
4470
1872
12500
Plate
20627
20631
20631
20G31
20627
20628
20628
20628
20628
20628
20628
20628
20628
20628
20631
20631
20631
20631
20628
20625
20625
20625
20625
20628
20628
20628
20628
20628
20628
20628
20628
20628
20628
20628
20628
20628
20628
20628
20628
Looper Holder Screw....................................................
“ Needle Guard with 46105
" '' " Pin
" ” " Screw..................................
* Set Screw
Needle Bar (hollow) with 8570.....................................
" " Bushing (lower)
* " *' " Set Screw.. ..
" " “ (upper)
" " " ” Set Screw....
" " Connecting Link
“ " *' " 54326 with
54327 and 54328..................................................
Needle Bar Connecting Link Hinge Stud...
„ i. « II
" " " Stud with 211F and
two 187E..............................................................
Needle Bar Connecting Stud Clamping
Screw....................................................................
Needle Guard
" " Holder.................................................
" " " Screw
" " Screw ................................................
" Set Screw
Oil Tube.........................................................................
" " Bracket
*' " Packing (ielt)..................................................
№esser Bar with 25303.................................................
" " Bushing (lower)........................................
" " " " Set Screw...
" " " (upper)
" " " " Set Screw...
" " Guide Bracket with 4530,6408
Presser Bar Guide Bracket Adjusting
Presser Bar Guide Bracket Guide
" ■' “ •' " Set Screw
“ » II II Roller and
Presser Bar Guide Bracket Set Screw
" “ Lifter........................................................
" " " Hinge Stud.............................
" " “ " “Set Screw.
" " " Roller and Stud..........................
" " * Stop Screw
................................................................
Oil Tube complete, for oiling Crank Con
necting Rod (upper bearing) Nos.
49092, 54108 and 54109
" Ball, size 1/4 In.......................................
and 1963
................................................................
Screw....................................................................
Stud.......................................................................
Name
...................................
......................................
............................................................
............................
............................
............................
......................................
.............................................................
..........................................................
.....................................
................................
.................................
...........................
............................
190J
574W
190J
175E
Plate
20625
20625
20628
20625
20625
20625
20625
20625
20631
20631
20631
20631
20631
20625
20625
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20629
20629
20629
20629
20629
20629
20629
No.
61C47 20628
68208
61075
460C
68184
16 ID
802D
38467
38468
26276
46455
46456
46457
1539W
54381
54242
54041
54042
54043
24292
1019C
54044
1253C
50150C
2102
51570C
50326C
59539
131740
59537
59538
131696
Name
Presser Bar Lifting Bracket with 460C
and 1872................................................................
Presser Bar Lifting Lever
" " " " Connecting Pin
M II II n II K
Set Screw...............................................................
Presser Bar Lifting Lever Extension
II II II « II Screw
" " " '' Hinge Screw...
" “ Spring (flat)
* " ' Stud
“ Foot Hinge Pin
" " Plate
" “ Shank
Presser Foot (hinged) complete. Nos.
26276 , 46455 and 46456......................................
Presser Foot Screw
Pressure Regulating Thumb Screw
“ II II II Lock Nut
Slack Thread Controller
“ " " Clamp
" " II II Screw
" * Regulator
" " " Holder with 175E
and two 50150C
Slack Thread Regulator Holder Clamping
Screw.....................................................................
Slack Thread Regulator Holder Shaft
“ “ " II II Collar
with 1019C............................................................
Slack Thread Regulator Holder Shaft
Collar Set Screw...................................................
Slack Thread Regulator Holder Shaft
Crank (forked) with 1253C.................................
Slack Thread Regulator Holder Shaft
Crank Set Screw
Slack Thread Regulator Set Screw
Tension (under thread) Disc
" " " Regulating Thumb
Nut.........................................................................
Tension (under thread) Screw stud
“ " " HU 50326C
with 51570C
Tension (under thread) Spring
“ ' “ ' Bushing
(large)....................................................................
Tension (under thread) Spring Bushing
(small)
Tension (under thread) Thread Guide
...................................................................
(double).................................................................
............................................
..........................
............................................
....................................
.............................................
......................................................
....................................................
.......................................................
............................
..............................................
..................................
...............................................
...................................................
........................
..................................................
.............................
........................................
.............................
..........................................................
....................................
...............
12
No.
54045
376D
2102
51570C
32572
54988
54046
54047
54048
624C
54990
316F
1547J
50326C
59539
131741
59537
59538
131696
53225
190J
38284
64351
465C
38210
38211
46247
176J
38475
465C
38478
54049
965D
46041
190J
38481
PARTS FOR MACHINE No. 147-4
Plate
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20630
20629
20629
20629
20623
20623
20629
20629
20629
20629
20623
20623
20629
20629
20629
20629
20629
20629
Tension (upper thread) Bracket.................................
" II ri II Screw....
" " " Disc
" " " Regulating Thumb
Nut........................................................................
Tension (upper thread) Releasing Disc...
*' " " " Pin
" " " " Shaft..
II II M II II
Crank with 624C
Tension (upper thread) Releasing Shaft
Crank Link
Tension (upper thread) Releasing Shaft
Crank Set Screw..................................................
Tension (upper thread) Releasing Shaft
Spring...................................................................
Tension (upper thread) Releasing Shaft
Stop Screw
Tension (upper thread) Releasing Shaft
Stop Screw Nut....................................................
Tension (upper thread) Screw Stud
“ *' " II 1 50326C
with 51570C
Tension (upper thread) Spring
II n i: n Bushing
(large)
Tension (upper thread) Spring Bushing
Tension (upper thread) Thread Guide
Thread (under) Eyelet (back)
Thread (under) Take-up Staple Bracket
Thread (under) Take-up Staple Bracket
Thread (under) Take-up Staple Spring....
..................................................................
(small)..................................................................
(double)................................................................
" « n It Screw
" * " (front)
" " Nipper Cam with 465C
" " " " Set Screw.................
*' '' " Spring (lower)....
" " " " (upper)....
II II II II II 3tQp
" « It « Screw
" " Take-up with 465C
" " " Set Screw
" " " Staple with two
each 590J and 38481...........................................
with 460C.............................................................
Screw....................................................................
It n n » II Screw
" " B » ipjji-ead Guard
Name
..............................
_____
.................................................
..........................................................
..................................................
...........................
........................................................
...................................
.....................................
............................
..........................
........................
..
..............
....................
..............
No.
590J
38482
207J
64355
64356
460C
54330
207J
38484
190J
54051
211F
54364
742F
*15404
15405
PARTS FOR MACHINE No. 147-4
Plate
20629
20629
20629
20623
20629
20629
20630
20630
20630
20630
20630
20628
20631
20631
Thread (under) Take-up Staple Thread
Guard Screw....................................................
Thread (under) Take-up Stripper
” " B » Screw.
* * " Thread Guard
(brass)...............................................................
Thread (under) Take-up Thread Guaird
Steady Pin.........................................................
Thread (under) Take-up Thread Guard
Steady Pin Set Screw.......................................
Thread (upper) Controller
" * * Screw
" • Eyelet
* * " Screw
* " Take-up
* " " Set Screw.....................
Throat Plate for 46443 and 54363
■ " Screw
Trade Mark
■ * Rivet
Genuine Singer Needles should be used
Company’s Trade Mark “SIMANCO.” i
in Singer Machines.
These Needles and their Containers
are marked with the
Needles in Containers marked
“For Singer Machines"
are not Singer made needles.
.................................................
..............................................................
.......................................................
13
Name
..........................
......................................
.........................
.........................................
.............................
.....................................
..........................
14
ACCESSORIES
No.
120344
120345
120440
121108
38487
120341
8908
4822
Plate
20632
20632
20632
20632
20632
20632
20632
20632
Oiler (copper plated) with 120345.
" Spout, 4 1/2 in. long................................
Screw Di'lver (large)
" " (small).......................................
Threading Wire..............................................
Tweezers (curved)
Wrench for 1520.............................................
" ' 1547
Name
......................................
..........................................
.........................................
BELT GUARD
No. Plate Name
68222 20633 Belt Guard with two wood screws 1
No. 12......................................................
BINDERS (Transverse)
In.
No.
194D
120356
665J
Plate
20634 Binder
20636
20636
120357 20636
665J 20636
35724 20640
35726 20640
185R 20640
162D 20640
35725
35727
35728 20640
1443F 20634 Binder
36596 20634
50004B
120279
20634
20634
26276 20634
46455 20634
46456 20634
46457 20634
120280
20634
BINDERS (Transverse)
Name
Bracket Screw Stud......................................
H
Hook (lower) for 120355
H
* " Screw for 120355
II
" (upper) for 120355
V
“ " Screw for 120355
H
Ribbon Tension Block..................................
(1
»1
M
N
M
II
Edge Guide...................................................................
II
* " Bracket with two 185R
" ” " Clamping Screw
" » « Screw
.............................................
" " P1n....................................................
" " Sturt.....................................
" " " 35727 with 35724
and
two 35725
Screw
....................................................
.............................................................
“ Screw..........................................................
..............................
_______________
...............................
_______________
Feed (back) Dog, 13 teeth (16 teeth to
the
Inch) for 120280
Presser Foot Hinge Pin................................................
tt
* Plate........................................................
N
Presser
“ Shank
Foot (hinged) complete. Nos.
.........................................
.....................................................
26276, 46455 and 46456.......................................
Throat
Plate for 120279
............................................
15
No.
120326
Plate
20634
36305
121756
20635
36498
120355
120358
20636
-------
120849 20637
120850
36306
36307
1425B
1443F
51224W
36308
1423B
20634
20634
20634
20634
20634
20634
20634
Name
Binder (transverse) for 36305.....................................
" ■ 120326 with 36306 and
two 1443F
............................................................
Binder (transverse) for 36498.....................................
" * 121756 with 36306 and
two 1443F, for neck binding, for
selvage edge material..........................................
Binder (transverse) for binding with
coarse dressing with 120356, 120357
and four 665J, for 120358
..................................
Binder (transverse) 120355 with 36306
and two 1443F.....................................................
Binder (transverse) for knit material,
for necking underwear for 120850---------------
Binder (transverse) 120849 with 36306
and two 1443F.....................................................
Binder Bracket with two 194D...................................
" " Lock Spring
........................................
• • " " Guide Screw..
• ■ " " Screw
......................
" " »11 Thumb Screw..
" • Plate............................................
" • " Screw
............................
FOOT LIFTER PARTS
No. Plate Name
6439
4879 20633 Chain Connecting Link........................................................
56864 20632 " Hook (large)........................................................
56865 20632 « " (small)
126249 20633 Treadle...................................................................................
4882 20633 “ Shaft
126250 20633 " Spring............................................................
150451 20633 " Stand
150452 20633 Treadle complete. Nos. 4879,4882,126249,
-------
Chain, 36 In. to 45 In. with 56864 and
56865
....................................................................
Note: When ordering No. 6439, state length required.
......................................................
..............................................................
.............................................................
126250, 150451 and two wood screws 1
in. No. 16 F.H
......................................................
16
17
No.
37563
56864
56865
2763
12242
6335
6336
2766
356C
2767
356C
6337
7125
356C
356C
2770
140219C
23767
KNEE LIFTER PARTS
Plate
20632
20632
20633
20633
20633
..........
20633
20633
20633
20633
20633
20633
20633
20633
20633
20633
20633
Chain, length 15 In. with 66864 and
56865
....................................................................
Chain Hook (large)
" " (small)
Rock Shaft
Rook Shaft Knee Arm
Rock Shaft Knee Arm complete, Nos. 2766,
Rock Shaft Knee Arm Hub with 356C
Rock Shaft complete. Nos.2763,2770,6336,
....................................................................
" " Hanger with two wood screws 1
In. No. 10
2767 and 6335......................................................
" " » « » 3gt screw
** " ” Plate with 356C
" " II » gg^ Screw
" * Lifting Bracket with two 356C
" " • ” Hook
• " " »11 gg^ Screw
<• « " " Set Screw
“ * Stop Dog with 140219C
• " " " Set Screw..............................
6337 , 7125 and two 12242..................................
.............................................................
Name
.....................................................
.....................................................
................................................
.....................
......................
.............................
..................................
....................
____
...........................
MACHINE BASE OIL DRAIN JAR
(SWINGING TYPE)
No.
131185
131191
131188
131217
131189
1247C
131265
131266
131267
131268
131327
Plate
20639
20639
20639
20639
20639
20639
20639
20639
20639
20639
Jar (glass)......................................................................
" Cap...........................................................................
" Clamp
......................................................................
“ ^ 131188 with 131189...........................
" " Lever
" * " Hinge Screw
Nipple (long)
" (short)
" Elbow.....................................................................
Machine Base Oil Drain Jar (swinging
Machine Base with Oil Drain Jar (swing
.................................................................
....................................................................
type) complete. Nos. 131185, 131191,
131217, 131266 and two each 1247C,
131265 and 131267...............................................
ing type) complete. Nos. 131268,
131340, three each 9842,51576E,54477
and four each 948E and 131279
TAPE HOLDER
Name
........................................
............................
.........................
MACHINE BASE
No. Plate Name
131340 20638 Machine Base
131019 20638 " " Oil Pipe..................................................
131020 20638 " HI.«' Valve
54477 20638 " " Screw Stud
51576E 20638 " " " * Nut
984 2 20638 » » « • » Washer
131279 20638 " Cushion (felt)
940E 20638 " Screw, to fasten machine to base
131320 20638 Machine Base complete, Nos.131019,131020,
131340, three each 9042,51576E,54477
and four each 948E and 131279
............................................................
...........................
............................................
...............................
................
.............................................
.........................
No. Plate Name
35908
35909 20640 * 35908 with 35910
35910 20640 " Hub........................................................................
35911 20640 Shaft...............................................................................
35912 20640 " Bushing With 35913.............................................
35913 20640 • " Guide......................................................
793D 20640 " " Thumb Screw
35914 20640 Spindle............................................................................
35915 20640 Stand
35916 20640 Tension Spring
288D 20640 " " Thumb Screw
35917 20640 Tape Holder (10 In. disc) complete, Nos.
..........
Disc.........................................................................................
...............................................
........................................
..............................................................................
......................................................................
...................................
288D,793D,35909,35911,35912,35914 to
35916 and three wood screws 1 In.
No. 10....................................................................
Loading...