SINGER 147-35 User Manual

Form 18421 lY-brujiry, 1930

PRINTED IN U. S. A.

LIST

PARTS

MACHINE No. 147-35

THE SINGER MANUFACTURING COMPANY

18421—1

CoPYBiOHT, U. S. A., 1925, 1927, 1928 and 1930

BY Tub Singe k Mandfactuking Co.

INDEX

page

Accessories....................................................................................................... 17

Belt Guard....................................................................................................... 17

Bench Stand..................................................................................................... 17

Foot Lifter Parts............................................................................................ 18

Knee Lifter Parts........................................................................................... 18

Machine Base................................................................................................. 18

Machine No. 147-35......................................................................................... 7

Numerical List of Parts............................................................................... 21

Obsolete Parts................................................................................................ 20

Tape Holder (5 in. diam.)............................................................................... 19

Thread LTnwinder.......................................................................................... 19

INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the part, NUMIIER

in llie KIKSd' column.

Tin; number .stamped on a Sewing Macliine part is in every

case tlui number of the single i)art only.

Kvery combination of parts sent out as such has its specific number, \vhi<-h, although not stamped on the parts, must be used when ordering the combination.

Laeh number always indicates the SAMK PART in whatever

list it ap]iears, or for whatever machine.

d’he letters after some of the numbers indicate the style of

linish only, as follows;

Hardened, Polished, Nickel Plated and Buffed

И - Polished, N’i(;kel Plated and Buffed

(' -llanhmed I )idy

1) ' Polished Only L —Soft, Not Polislicd

h -Hardened and Polished

11 -Blued

.1 -Nii-kel Plated Only

К—Hardened and Nickel Plated

I. — Brass I'lated

-M -(txidized N—.lapanned. Dull

P—J.4|);iuned, Bright

ft —Miaii/.ed

1’—(’oi>per Plated

T. A.—Hardened, Polished, (topper and Nickel Plated T. И.—Copper and Nick(d Plated and Polished

'Г. ,1.—Copper and Nickel I'lated Only

'Г. K.—Hardened, (.!op[)('r and Nickel Plated

T. .M. -—('(jpper Platisl and I ixidized

’]'. L.—Co))|)er and Biass Plated

Z. B. — Polished, Nickel Plated, Buffed and (,’hioinium Plated

Z. J. -Nickel and (Ihroniiimi Plated

These lettei's M liST BL USKD when they ajijiear in the list;

and .VP risR the number as in the list.

Jn this series:

The figures in the second column refer only to the plates,

illustrating the jiarts, and are N’O'J' 'TO BE liShll) in ordering.

Parts marked witii an asterisk (*) are furnished only' when

repairs are made at factory.

When ordering parts which differ as to Gauge (the distance

between .seaiiisl the Gauge, us well a.s the Number must be

given oil order.

and Bulfed

C—Zme Plated \'—Silver Plated

\\ - Polished and .Nick(d Plated

/. -Chroinium Plated

1 (o IhlK) and 50001 to 51.501) are Screw Numbers

1.501 to IStlO and 51501 to 51St)0 are Nut Numbers 1801 to 'dOOO and 51S01 to 52000 are Roller Numbers

20111 to 50U0U and 52t)01 ami upward are numbers of

Machine I’arts

LIST OF PARTS COMPLETE

FOR

MACHINE No. 147-35

FOR STAYING SHOES. TWO NEEDLES. TWO LOOPEBS. TWO

THREAD CHAIN STITCH. GAUGES IN. TO IN. THREAD NIPPING DEVICE. FOOT LIFTER. SPEED UP TO

3500 ACCORDING TO THE MATERIAL BEING STITCHED.

•NO. I’l.Vl'E

.51182

04388 8001

■ - --

4230(1

8001

50000

.50003

80.S.5 .52015 8001 .54183

8038

.51102

01380

8001 8001

440c

8001

423c

Arm, uiiper and lower (solid) with 918i) and

510:il

Arm Oil Pad (liraided cotton) for oiling

-Vnn Roek Shaft Front Bearing

Ann Oil Pad (braided cotton) for oiling

.Vriii Rock Shaft Intermediate Bearing

Arm Oil 'Tube with 52045 for oiling 54321)

“ “ “ Packing (braided cotton)..

“ Roek Shaft..................................................

“ “ “ .54183 with 4(1383, 64004,

.54184 and (14255......................................

Ann Uoek Shaft Bushing (back)..................

“ “ “ “ “ Set Screw “ “ “ “ (intermediate)

ii U i( i( U

Set Screw......................................................

NAME

..........................

..............

I, /1611

8 PAIiTH FOIi. MACHlNli No. MTAiS

PAirrS fOR MACHINE No. 147-35

.NO. rj,.«'10 NAMK

52015 soul .\nii Koi'k rihnft Busliiiig Oil I’lul (Oruiilcd

ciollon).........................................................

5-1001 ,S901 Arm Kork .SliafI OolUir with two Ihiic. . .

15:!c .soot “ “ “ “ SctScrcw

51 LSI sttS5 “ “ “ Crunk (lim:k) willi two

.500S:ic

........................................................

ultOSiir: S'.tOl .\rm Jiock Shaft Crunk (bunk) Set, Screw 0-1255 OSS'2 “ “ “ “ (front) with 15)!c

2117 ,S‘.)lll “ “ “ “ “ Pin

............

15:!i; .S'.KU “ “ “ “ “ Set. Screw

51105 StKll “ “ “ Muiifiiul liiishiiiK (front,)

■l.o.'ic SOOl Set Screw

.....................................................

52015 SOOl .\rm liock .Shaft l''lant;e(l liiishiiin (front)

Oil Pad ibruided (a)tton)

*51000 ,St)3S ,'mii Kotury Shaft

............................................

..........................

NoTii: When No. 51000 is reiiuired for repair.s, tin!

I.ooi)er 1 :riving Shaft and feed Lifting Kccen-

tvic must, he, returned to the factory

to hi' adjusttal to the ne,w part.

5 11 IS

------

.triu Kotary Shaft 5 UlOti with O-lOi), 51008,

5 loss, 51113, .51117, 01351 and 01355.

5I0S1 S901 .\rm liolai v Shaft Hushing (front)

...............

52015 StlOl “ “ “ “ “ Oil Pad

(bi’aided cotton)

........................................

701n SOOl ,\rm Ibjtary Shaft Hushing (front) Set

ScJ'ew...........................................................

51007 8902 ,\rm llotary Shaft Hushing (intermediate,) 510,89

51007 with 01.50S .and fHS05

...............

01.508 8902 .\nii notary Sliafl Hu.shing (intennediatip thl Pad, long (braided cotton)

.................

01805 S'.)S5 ,\rm Kotary .Shaft Hushing (intermediate)

Oil Pad, short (braided colton)

...............

122e 8901 .\rm Kotary Shaft, Hushing (intermediate)

Set .Screw (long)

.......................................

50(),S lc 8901 .Irm Kotary .Shaft Hushing (intermediate)

Set .Screw (short)

......................................

5100S 8901 Arm Kotary Shaft Collar with three 1259i;

1259c 89,58 “ ‘‘ “ ‘‘ .Set Screw 51009 8902 “ “ “ h’ianged Hushing 54090

----------

" “ “ “ " 51009

with 58t)39 and (11,805

...........................

............

.........

,58039 8902 ,\rui Kotary .Shaft flanged Hushing Oil

Pad, long (l)raide(l cotton)

......................

0IS05 8985 ,\rni liofary .Shaft flanged Hushing (til

Pad, short (braidi'd cotton)

...................

.........

NO. NAME

I59i.' 8!i01 Arm Rotary Shaft Flanged Bushing Screw

49013 8904 “ “ “ Front Hearing Oil Pad

(braided colton)

14 In 8901 .Arm Rotary Shaft Screw'

15190 8902 “ Side Cover (back)

..........................................

...............................

................................

2801) 8901 “ “ “ “ Thumbscrew....

51010 8901 “ “ “ (front)

................................

280n 8904 “ “ “ “ Thumbscrew...

.51210 9889 Hahince Wheel, 2>g in. pidley with two

■I30c..............................................................

43()c <8904 Baliince Wheel .Set Screw

51199 8938 Ch)lh Plate

..........................................................

51012 8902 “ “ Slide (left)

...........................

..................................

38419 8901 “ “ '• “ Spring......................

725) 8901 “ “ " “ “ Screw ...

51013

51055 9889 Cloth Plate .Slide (right) for 54050 08191 38119 89114 “ “ “ “ Spring

------

Cloth Plate Slide (left) comirlete, Nos.

38419, ,54012 and two 725i

--------

“ “ “ “ “ 08192

.....................

.................

............

.......................

7251 .8904 “ “ “ “ “ Screw..

,510.50

------

Cloth Plate .Slide (right) comi)lete for

51200, Nos. 38419, 51055 and two 725j

,51200

------

Cloth Plato comirleto, for 3% in. to i\- in.

gauges, for 08014, Nos. 54013, 51050

and ,51199....................................................

0S20S

------

Cloth Phite coin])lele, for in. to in.

gauges, for 54338, Nos. 54013, 54199 )inil 08192

101 Ir soot Cloth Plate Screw (left) 50I73f 8901 “ “ “ (right) 54104 8938 •“ “ 'rUread Guard

1235i) 8904 “ ‘‘ “ “ Screw

....................................................

.....................................

..................................

................................

...................

51017 8902 Crank Connei-ting Rod with t)575, 51018,

51218, 54897, 57222 and two each 890e

and 10.57E....................................................

51088

--------

Craidv Counceting Rod 54017 with 50069c

50009(' 8904 “ “ “ Hall Screw Stud

1511)10 8901 Nut

.................................................................

04208 8904 Clrank Connecting Rod Ball Screw Stud

Washer...........................................................

*57222 Crank Connecting Rod Cap (lower)

.........

SiKli'O 8904 “ “ “ “ “ Screw

*,51018 “ “ “ “ (upper)

.........

1057e 890-1 “ “ “ “ “ Serew

,54897 8904 “ “ “ Oil Cup

...................

NO. I'l.ATE NAME

54218 8904 Crank Connecting Rod Oil Pud (brai<led

()575 8904 (9'ank (kmnecting Rod Oil Pad Stoj) Pin

04209 9889 Face Plate...................................................................

40111 9888 “ “ Pin......................................................

280i) 8904 “ “ Screw..............................

54019 8902 Feed liar with 50129c and two lOIic......................

54020 8902 “ “ (.lonneetion 57225 8904 “ “ Hinge Pin

453i: 8901 “ “ “ “ Set Screw

54111 8902 “ Connecting Rod with 1057e, 54112

54113

♦54112

890e 8904 “ “ “ “ Screw...................

1057E 8904 “ “ “ Clamping Screw.. . 54023 9882 “ “ “ Hinge Pin 21500 8904 “ “ “ “ “ Collar

457c 8904 Feed Counecling Rod Hinge Pin Collar

(18011 9881 Feed Hog, U1 teeth (10 teetl\ to llie intdi)

54337 9881 Fee<l Hog, 17 teelh (Hi teeth lo thi; inch)

157w 8904 Feeil Hog Screw

50429c 8904 “ “ Stop Screw..........................................

*51024 - -- i'eed Kcceidri<' ♦23729

51001c 8958 “ “ “ Set Screw

7071 8901 “ “ Clamping M'a.shcr

21 To 8904 “ “ “ “ Screw'. .

51025 8985 Feed F.ia-entric (adjnstahle) eomidete,

1103c 8904 Fc‘cd Regulating Scianv..........................................

54020 9873 “ Rocking h’rame wit h I wo 453c 54077 - - “ “ “ 51020 with 21500,

57234 9882 Feed Rocking Frame Hinge I’in 57235 8985 “ “ " “ " Bushing

453c 8901 “ “ “ “

453c 8901 I'l'cd Rocking Frame Hinge Bin Set Screw

PAllTS FOR MA(;HINE No. 147-35

i;otl<in)

..........................................................

.........................................

...........................................

........................

and two 890e..................................................

---------

Feed Connecting Rod 54111 with 54025..

-----

“ “ “ Cap

W'ith 457c......................................................

S(d Screw'

tor 08014........................................................

for 54338........................................................

,No']'e: When ordering No.s. 51337 or 08011

--------

state, gauge reipiireil.

“ Hody

No.s. 2170, 1103c, 7071, 23729, 54021 and two 51001c

.54019, 54020, 51023 and 57225

Set SiTew

......................................................

.....................................................

........................................................

...................................................................

.........................

..............................................

.......................................................

.....................

................

..................

...................

PARTS FOR MACHINE No. 147-35

NO. I'LATK NAME

54100 9883 Looper (hack) closed eye........................................

Note; When ordering No. 54100, state gauge

of machine for whicli required.

1147c 9883 Loojier (hack) Set Screw

54107 9883 Looper (front) closed eye........................................

No'I’e: When ordering No. 54107, state gango

of machine for which required.

1120c 8958 I,ooper (front) Set Screw

54027 9883 “ Carrier with two 171d

1711) 8958 “ “ Adjusting Screw

54227 9883 “ “ Connection

51228 9883 “ “ “ Shaft 51229 9883 “ “ “ “ Bushing

440c 8901 “ “ “ “ “

49013 8904 Ijooper Carrier C-onnecliou Shaft Oil Pad

54230 9883 Ijooper Carrier Driver with 54032 and

♦54032

*54440 8990 “ Driving Shaft and Feed Lifting

*51034

....

------

175e 8958 “ “ “ “ Screw

No'gu; When No. 51440 is required for repairs,

the .\rm Rotar}' Shaft must he returned

51117

------

51080 8990 Loo|>er Driving Shaft and Feed Idfling

04315 8990 Looper Driving Sliaft and Feed Lifting

227i> 8958 Looper Driving Shaft and Feed I,itting

40320 8990 Looper Driving Shift and Feed Lifting

OlOi) 8958 f/Oojicr Driving Shaft and h'eed Idfling

Set Screw

(l)raidcd cotton)

four 175e.........................................................

Looper (.turrier Driver Cap

Eccentric wilh 227o and two 04315.. . .

to tile factory to he adjusted to

the new ])ivrt.

Looper Driving Sluift and Feed Lifting

Eccentric 54440 with 51027, 54227,

54228 and 54230

Loojier Driving Shaft and Feed Lifting

Feeentric Bracket with 7()1e.

Eccentric Bracket Bushing

701E SilOl Looper Driving Shaft and Feed Lifting

OlSi) 8958 I.oopcr Driving Shaft and I'ecd Lifting

Kcceutric Bracket Screw

Feeentric Oil Hole Plug

Eccentric Oil Hole Screw

Feeentric Oil Fad (braided cotton) . . .

Eccelli rie Screw.............................................

..........................................

.................................

...........................

...................................

.................

........................................................

..............................................

....................................

..................

............................................

.........................

.............................

Feeentric Bracket Bushing Set Screw'

...............................

..................................

...............................

PAli'I'S FOR iMACRIINK No. M7-35

N'O. PI.A'I'Fi ,N..\MK

5l()()L SD'.K) l.()<)|)cr Iloider witli 1120c and 1117c..

7(Uw iSO.liS “ “ .Screw......................................

0-1310 OSSI Nec'die Bar (hollow,)

511102

.\ecdle liar complete, for In. to ‘-4 in

..........................................

fiaiines, .No.s. 51001, 51005 )uid 01319.

51003 —

N(4'(II(f liar (Foniplete, for in. to i*« in

Winne.s, Nos. 51001, 51000 and 01319

3K150 9.SS2 Nis'dle liiir linsliing (lower)

1 133k ,S05S

01321) OSSO ll33i:: S05.S

51320 9.S.S2 51320 - -

‘‘ “ “ Set .Screw. “ “ (upper)

“ “ Set Screw. “ ( 'onneci inti Link “ “ “ 51320 with

5 1327 and 5 132S

.51327 9.882

1520.1

51328

LS7k

51001 Ò 10()5

51000

') 10t)7

N('cdl(' B:ir ('onnecting Link Hinge Stml

‘ISNS

Nut..................................................................................................

9883

XtH'dlc liar i'oniK'ctin^ Stud witli 211k

Mild two lS7i-:

8958

Xci'dle iiar (¡iiji Stud (’lumping

988 1 988 1

988 1

Sci-cw.............................................................................................

X'(vdl('('hunp wit li two 14i)SK

“ '■ TInead (iuard, for ¿5 in.

lo 1 in. gauges............................................................................

Needle ('lamp Thread (luard, for in.

to ‘Ns in. ^auiie.s......................................................................

Needle (iuard for ijo in. to in. ^aufiii.s.

...........................................................................

.5 1008 988 1

988 1

51009 51038 98.8 1

I70n

8958

217k

,890 1

1 198 k

8958

01330

9873

25303

8990

01331

9882

ПЗЗк 8958

liS I'ili

9882

1 I33k S'ifiS

51039 898.5

0 lOw

8958

11173

8985

117c

(Iuard Holder................................................................

" “ Screw

.....................................................................................

.Set Screw......................................................................

rresiser liar with 27)402...............................................................

" “ Ball, size ‘ j in...................................................................

“ Bushing (lower) “ “ “ Set Screw...

" “ “ Set Screw. .

" “ GnideBr;ieketwilli453c,010w

:ind 1903.......................................................................................

I’re.s.ser Bar Gnidi' Bmeket .\djnsling

Sci-ew.............................................................................................

l’i'e.s,s('r Bar Gniile, Bracket Guide........................................

Screw..............................................................................................

...........................

.....................

....................

.........................................

................................................

" A in. lo A ill. gauges.

“ A in. lo A in. gauges.

Screw

.......................................

...................................................

(npi)er)

......................................

.Set

PARTS FOR MACHINE No. 147-35

NO. I'b.AXK N.AME

1903 89S5 Presser Bar Guide Bracket Holler and

Stud.................................................................

153c 8901 Presser Bar (Inule Bracket Set Screw

57257 9882 “ “ Lifter

................................................

57258 9882 “ “ “ Hinge Pin

-----------------

.......................

117c 8958 “ “ “ “ “ Set Screw..

1872 8985 “ “ " Holler and Stnd

.............

1250c 9881 “ “ “ Stoi) Screw............................

01017 9881 “ “ Lifting Bracket with 400c and

1872

08208 9873 Presser B;ir Lifting Lever

..........'....................................................

.......................................

01075 9881 “ “ “ “ ConnectingStud

100c 9888 “ “ “ “ “ “

Set Screw........................................................

08181 9873 Pres.ser B;ir Lifting Lever Extension

.....................

lOln 89.58 “ “ “ “ “ Ì8cre\v

8021) 8958 “ “ “ “ Hinge Screw. . .

51010 9873 “ “ Spring (flat)

..............................

38108 8990 “ “ “ Stnd...............................

08012 9881 “ Foot Needle Gnard

..........................

900c 9881 “ “ “ “ Adjusting

Screw..............................................................

210w 9881 Pres.ser Foot Needle Gnard .Screw

.........................

08013 9881 “ ‘‘ witli 210w, 08012 and two

900c, tor з'з in. to iV in. ganges

.....................

Nono; Wlien ordering No. 08013 state

gauge rcFinired. 20270 9881 Pre.sser l''oot Hinge Pin 08211 9881 “ “ Needle (inani

337w9881 “ “ “ “ Screw 08215 - “ “ Plate 10087 - “ " Shank

..........................................

...........................

...............

..........................................

........................................

08210 9881 Presser Foot (liinged) complete, for in.

to )s in. gauges, Nos. 20270, 40087, 08245 and t wo each 337w and 68244.. .

Notk: \Mien ordering No. 08240, state

gFuige re.ipiired.

190n 8958 Pre.sser Foot .Screw.................................................

57 Iw 8958 l’r(;ssnre Regidating Thuinl) Screw

........................

1539w 9888 “ “ “ “ Lock

Nut..................................................................

51381 9881 Slack I’lircad Controller 51212 8990 Slack I'liread Controller Clamp

.........................................

..............................

1901)8958 “ “ “ “ Screw...

01337 9881 “ “ Regulator

.........................................

51012 8990 “ “ “ Holder with 175k

and two 50L50c

..............................................

М PARTS FOR MACHINE No. 147-35

PARTS FOR MACHINE No. 147-35

NO. Г1.АТК NAME

175e 8958 Slack Tliread Regulator Holder Clamping

Screw..............................................................

51013 8990 Slack Thread Regulator Holder Shaft 9-1299 8990

Collar with 1019c...........................................

1019(; 8958 Slack 'I’hread Regulator Holder Shaft

('ollar Set Screw

.............................................

51014 8990 Slack d'liread Regulator Holder Shaft

Crank (forked) with 1253c

.............................

1253c 8958 Slack 'I'hread Regulator Holder Shaft

('rank Set Screw

50150c 8958 Slack Thread Hegulator Set Screw

.............................................

..........................

35717 9888 Stay Ciuide (lower)...........................................

35718 9888 “ “ (upper) 35719

------

Stay Cuidc complete, Nos. 35717 and

.................................................

35718..............................................................

T199i) 9888 Stay Cnide Screw....................................................

9109 t)885 Tension (under tlmaid) Disc

..................................

51570c ',»885 “ “ “ Regulating

Thumb Nut.....................................................

32572 9885 d'ension (under thread) Releasing Else.. . 50390c t)885 “ “ ‘‘ Screw Stud 59539 ------------- “ “ “ “ “ 50390c

with 51570c....................................................

5i)53-l 9885 'I'eiision (under thread) Spring 59537 9885 •' “ “ “ Bushing

(lai'gc)............................................................

59538 9885 d’eiision (under thread) Spring Hushing

(small)............................................................

17517 9885 'reiislon (under (bread) d’hread (iuiile. . , 51910 9880 ‘‘ (ujiper thi'cad, aulomatie) Body

1508,1 9880

Xut.................................................................

.51333 9880 d'eusion (upper (Uread, a domaticl Body

lieleasing Bin.................................................

40383 9880 Tension (upper thriaul, aulomatie) Cam

willi two 1953c

..............................................

1953c 8958 Tension (upper thread, automatic) Cam

Set Screw........................................................

2109 9885 'Pension (upper thread, aulomatie) Disc.. loliOc 9885 “

..............................

“ “

....................

“ Regu

lating 'Plumib Nut

39579 9885 Tension (upper thread, automatic) Helcas-

ing Disc..........................................................

5010tic 9885 'rcii.sion (upper tliread, aiitoniatie) Screw

Stud

................................................................

NO. fl.ATB

53213

----------

'Pension (upper thread, automatic) Screw

Stud 50100c with 1560c

NAME

.................................

40385 9885 'Petision (upper thread, automatic) Screw

Stud Releasing Pin..........................................

46387 9885 'l'e,nsion (upper thread, automatic) Spring

54944 9886 “ “ “ “ 'Phread

Guide...............................................................

5-1070 8990 'Pension (uj)per thread) Bracket................................

3 7 0

i) 89.58 “ “ “ “ Screw ..

2109 9885 “ “ “ Oise

........................

51570c 9885 “ “ “ Regulating

'Phumb Nut

.....................................................

32579 9885 'IVnsion (upper throad) Releasing Disc.. ,

5 1 988

9885 “ “ “ “ Pin.. . .

51071 9889 “ “ “ “ Shaft 54047 9880

Crank with 624c..............................................

5104 8 9,880 'Pension (njtper thread) Releasing Shaft

Crank Link......................................................

094c 8958 'Pension (upper tlrread) Releasing Shaft

...

51990 9886 'Pension (upper thread) Releasing Shaft

Crank Sot Screw

Spring.....................................................

...

316f 8958 'Pension (upper thread) Releasing Shaft

Stoj) Screw......................................................

.............................................

1547j 9885 'Pension (upper thread) Releasing Shaft

Stop Screw Nut

...............................................

50390(; 9885 'Pension (upper thread) Screw Stud..........................

59539

---------

“ “ “ “ “ 50320c

with 51570c

59.535 9885 'Pension (tijjper thread) Spring

....................................................

......................

59537 9885 “ “ “ “ Bushing

(liirg")

.............................................................

59538 9885 'Pension (upper thread) Spring Bushing

(small).............................................................

57070 9885 'Pension (upper thread) Thread Guide

(double)

..........................................................

08234 9887 'Phread Oil Cup.......................................................

08235 9887 “ “ “ Cover...................................

51515 9887 “ “ “ “ Hinge Pin

.................

08236 9887 “ “ “ “ Latch Spring 50411D '9887 “ “ “

08237 9887 'Phread Oil Cup Cover Oil Fad (felt).. .

SerCAV.........................

005n 9887 “ “ “ “ “ “ Screw..

08238 9887 “ “ “ Oil Pud (felt) for Cup.

4'9092 9887

“ Tube

NO. rl.ATH N.^MK

68239 9887 Threiul Oil Cup and Oil Tube comi>!ete,

53225 9886 Thread (under) Kyelel (hack)

190d 8958 “ “ “ “ Screw 51072 9886 “ “ “ (front) 64351 9886 “ “ Nip])or Cam with 465c. .

465c 8958 “ “ “ “ Set Screw. . 38210 9885 “ “ “ Sijring (lower). . . 38211 9885 “ “ “ “ (u])per) 46247 9885

17(n> 8958 Thread (under) Nipper Spring Screw. . . .

38475 9886 “ “ Take-up with 465c

465c 8958 “ “ “ Set Screw..............

54435 9886 “ “ “ Staple with 590i>

54049 9873 Thread (under) d’ake-up Staple Bracket

965d 9888 Thread (under) Take-up Sta[)le Bracket

46041 9885 Thread (under) Take-u]) Stat>le Spring

190n 8958

38481 9886 d’hiead (under) d’ake-up Staple Thread

590n 8958 Thread (uniler) Take-up Staple Thread

38482 9885 Thread (under) Take-up Stripper

207d 9888 “ “ “ “ vSerew.

64355 9886 “ “ “ Thread Guard

64356 9886 'I'hread (under) Take-uj) Thread Guard

460c 9888 d'hreiid (under) d'ake-up Thread Guard

54330 9886 Thread (upper) Coidroller

207n 9888 “ “ “ Screw

46009 9886 “ “ Kyelet

190d 8958 “ “ “ Screw

51094 9888 “ “ Take-up 54095 9888 “ “ “ Plate 68164 9888 “ “ “ “ S])ring

14491) 9888 “ “ “ “

PARTS FOR MACHIN!'] No. M7-.35

for oilin

{ 5

up|)cr thread and crank con

necting rod (ui)per l)earing), Nos. ■1901)2,

501111), 54515, 682:11 to 68238 and two

665i)...............................................................

Stop

................................................................

and 38481.......................................................

with 460c........................................................

Sci-ew.............................................................

Screw..............................................................

(hiard..............................................................

Guard Screw...................................................

(bra.ss)

...........................................................

Steady Pin

Steady Pin Set Screw

Screw..............................................................

......................................................

....................................

............................

...........................

.....................................

..........................................

.........................

....................................

............................

.................................

....................

...............

................

P.ARTS FOR MACHINE No. 147-35

NO. rl.ATB NAME

54096

---------

Thread (upi>er) Take-up complete. Nos.

1449n, 54094, 54095 and 68164

211c 8958 Tliread (ut)per) 'I’ake-up Set Screw

68014 9881 4'hroat Plate, for in. to in. gauges,

for 68011.........................................................

54338 9881 Throat I’late, for j’j in. to % in. gauges,

for 543,37........................................................

Note; When ordering 54338 or 68014, state

742p 9884 Throat Plate Screw

gaufee reipjired.

...................................................

....................

.........................

ACCESSORIES

NO. 1‘I.ATE NAME

120344 8941 Oiler (copper plated) with 120345. 120345 8941 “ Spout, 5 in. long

26026 8941 Screw Driver (large) 26485 8941 “ “ (small) 38487 8941 Threading Wire

120341 8941 Tweezers (curved)......................................

8908 8911 Wrench for 1520..................................

19221 8941 “ “ 1516..................................

4822 8941 “ “ 1547..................................

...............................

......................................

...........................

..........................................

BELT GUARD

NO. 1‘I.ATE NAME

68222 9879 Belt Guard with two wood screws 1 in.

No. 12

.............................................................

BENCH STAND

NO. I'l.ATE

79611

41538

126217 12621S

60656

9:i70 5604

---------

8952 8952 8952 8952 8952

Bench Stand with 5604, 9370, two 41538,

three wood screws IM No. 14, four 60656 and sixteen wood screws

No. 7

...............................................................

screws in. No. 4.......................

Flush Bolt............................................................

“ “ Plato

Hinge...................................................................

Slide Spring.........................................................

“ “ Pin

NAME

% in.

Flush Bolt with Plate complete. Nos.

126247, 126248 and four brass wood

.......................

...................................................

......................................................

M.VCMlNli BASE

NO. PLA'I K

—

0139

Note:

8941

4879

50804

891L 898,5

,5li80,5

12024»)

1202.50 8911 120251 8980 120252

8980

48.S2

89 11

8980

I’l.A'lUh

NO.

—

37,503

8911

50804 .50805 898.5

2703 8i)S0

12242 8980

8980

0335 0330

---

8980

2700

3,50c 898.5

2707

8980 8t)S:5

55()C

89.80

0337

8980

712.5 iiotit:

8')8.5

3,50c 898,5

2770 89,SO

898.5

3,5()C

23707 8980

NO. I'LA'UK

08223

‘J879

51072E 9888

FOOT LIFTER PARTS

Cliain, in. to 15 in., wit h r>t)S(i 1 and

5()S(>5...........................................................

WIh'ii ordf'iinp^ No. «tato

lon^t li ro(|iiiro(l.

Chain Comu'eling Link

“ Hook (large)

“ “ (small).......................................................

Treadle................................................................

Shaft " Spring

“ Stand..........................................................

'freadle eomplete, Nos. 4882, 120249 0

Ì2I)'J,~)I iiiid two u’ooil .scnivvs 1 in. No. Ili

NAME

......................................

................................................

....................................................

........................................................

KNEE LIFTER PARTS

N,\MK

Chain, length 15 in., wil h ,5()804 and 5080,5

“ Hook (large)................................................

“ “ (.small)

Roek Shaft..........................................................

" “ Hanger with 1 wo wood screws

1 in. No. 10 Roi’k Shaft Knee .\rm Roek Shaft Knee Arm eomplete, Nos.

•

2700, 2707 and 033.5.....................................

Jio(‘k Shaft Knee Arm llnh with lioth:. . .

“ ■» “ “ “ Set Screw. . .

“ “ “ Plate with 350c.......................................

“ “ Set Serew “ “ Lifting Bracket with two 350c “ " ‘» “ Hook “ “ “ “ “ S e t

Screw..............................................................

Rock Sliiift Lifting Bracket Set Screw.. . .

" “ Slop Dog with 350c

“ ‘‘ “ “ Set Screw............................................

Rock Shaft comj>lete, Nos. 2703, 2770,

0330, 0337, 7125 ami two 12242

.....................................................

....................................................

........................................

..................................................

............................................

..................................

...................

MACHINE BASE

NA.ME

Machine lhis(‘

»• “ Bolt with 5L581e.....................................

....................................................

NO. I'L.^TE NAME

515S1e 9888 Machine Ba.se Bolt Nut............................................

(iimf) 8990 “ “ “ “ Washer

49l-_»:i 8990 “ “ Oil Pipe........................................

0088-t 8985 “ “ “ “ Plug

57'.i85 8!ii)0 “ (iusliiou (hslt).....................................

918k 8958 “ Screw, to fasten machine to l)as(^

082'J t ' - Machine Base complete, Nos. 49123,

00884, 08223, three each 0055, 51072e and four each 948n and 57285

......................

.............................

..........................

TAPE HOLDER (5 In. Diam.)

FOR UNDER THE BENCH

NO. I'l.A'J’E NAiVIE

30795 8!)38 Ta])e Holder Body

30790 89:’.8 “ “ Cover................................................

55n 9884 “ “ “ Hinge Screw

28991 8938 Tape Holder (5 in. diam.) comidete, Nos.

55i), 30795, 30790 and two wood screws

Ihi in. No. 10

.................................................

.......................

..................................................

THREAD UNWINDER

FOR FOUR SPOOLS

NO.

225395 89.53 225388 8953

20()383c 8985

201018c 8985 202190 8953 22,5391 89,53

201090.r 9888 225392 8i)53

208e 8985

225393 9888 225398 8953

27739 8990

225390 8t)90

NoTio :

; NAME

Spool Rest (for two sirools) with 201018O

“ “ Rod

“ “ “ Set Scr(!W................................

“ “ Set Screw...........................................

“ Stand with 200383c

Thread Cuide.......................................................

“ “ Ta)ck Nut..................................

“ “ Rod with 208e and 225393 “ “ “ Screw

“ “ “ Washer............................

Thread Unwinder complete, Nos. 201090.1,

202190, 225388, 225392, two 225395, four 225391 and three wood screws in. No. 12

Thread ( .¡one (wood) for large cones

“ “ Holder, for inverted cones..

Nos. 27739 and 225390 are used with,

but not included in 225398

....................................................

......................................

..............................

........................................................

................

+ 21 hidden pages