How it Works
SINGER
Loading...
147-29
User Manual
53 pgs1.65 Mb0
User Manual
105 pgs17.09 Mb0
User Manual
53 pgs4.05 Mb0
Table of contents
Loading...

SINGER 147-29 User Manual

Form 18413
February, 1930
I'RINTED IN U.S A.
LIST
OF
PARTS
MACHINES
Nos. 147-29 and 147-38
18413 — 1
CoPYKiauT, U. S. A,, 1922, 1925, 1927, 1928 and 1930
BY The Singeb Manupactubing Co.
All Kights Hesebved fob All Countbies

INDEX

PAGE
Accessobies
Attachments.......................................................................................... 31
Belt Guard............................................................................................. 36
Bench Stand........................................................................................... 36
Feed Roll (Ruubeb)............................................................................... 35
Foot Liftbb Parts.................................................................................. 37
IIemmer.................................................................................................... 31
Knee Lifter Parts.................................................................................. 37
Lap Seam Fellers................................................................................... 33
Machine Base......................................................................................... 38
Machine No. 147-29................................................................................ 7
Numehical List of Parts...................................................................... 43
Obsolete Parts...................................................................................... 40
Spool Holder......................................................................................... 38
Strip Folder............................................................................................ 35
T'apk Holder (Adjustable).................................................................. 38
'Pape Reel................................................................................................ 39
3’hread Unwinder................................................................................. 40
...........................................................................................
“ “ 147-38............................................................................... 19
30

INSTRUCTIONS FOR ORDERING

111 ordering from this list, use ONLY the part NUMRER
in tlie FIRST eolninn.
'rhe number stamped on a Sewing Maidiine part is in every
case the nuinli(ti- of the single part only.
livery eombination of parts sent out as such has its specific nundier, whndi, although not stamped on the jiarts, must be used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A—Hardened, Polished, Nickel Plated and Buffed
B—Polished, Nickel Plated and Buffed
C—1 lardened Only
D—Polished Only
E—Soft, Not Polished
F—Hardened and Polished
11 ^Blued
,1—.Nickel Plated Only
K—Hardened and Nickel Plated
L—Brass Plated
M -Alxidized
N—,Ia|)anned, Dull
P—Japan,ned, Brigiit R—Merlized T —Coiiper Plated
'r. A.—Hardened, Poli.shed, Copper and Nickel Plated 'I'. B.—Co|)per ami Nickel Plated and Polished
T. J.—Copper and Nickel Plated Only
'I'. Iv.—Hardened, Co])|)er and Nickel Plated
'1'. lU.—Copjjer Plated and Oxidized
T. L.—Copper ajid Brass Plated
Z. B.—Polished, Nickel Plated, Buffed and Chromium Plated
Z. J.—Nickel and Chromium Plated
'I'hese letters MUST BE USED when they appear in the list;
and AFTER the number as in the list.
Parts marked with an asterisk (*) are furnished only when
repidrs are made at factory.
When ordering parts which differ as to Gauge (the distance
between seams) the Gauge, as well as the Number must be
given on order.
and Buffed
U -Zinc Plated V—Silver Plated
\V—Polished and Nickel Plated
Z—Chromium Plated
In this series:
1 to 1500 and 500f)l to 5150f) are Screw Numbers 1501 to ISttO and 51501 to 51800 are Nut Numbers 1801 to 2000 and 51801 to 52000 are Roller Numbers
2001 to 50000 and 52001 and ujiward are numbers of
Machine Parts
The figures in the second column refer only to the plates,
illustrating the jiarts, and are NO'!' TO BE USED in ordering.
LIST OF PARTS COMPLETE
FOR

MACHINE No. 147-29

FOR TWO-LINE STITCHING IN FABRICS. TWO NEEDLES,
TWO LOOPERS, FOR TWO THREAD CHAIN STITCH.
FOOT LIFTER. GAUGES FROM ^ INCH TO % INCH. THE MACHINE IS FITTED WITH UPPER AND UNDER CORRUGATED FEED ROLLS ATTACHED TO THE MACHINE TO ASSIST IN CARRYING THE MATERIAL FROM THE MACHINE AFTER BEING STITCHED. THE UNDER ROLL RECEIVES ITS MOTION FROM AN ADJUSTABLE ECCENTRIC ON THE ROTARY SHAFT, BEING INDEPENDENTLY AD
JUSTABLE TO BRING THE MOTION OF THE FEED ROLLS IN UNISON WITH THE FEEDING MECHANISM. SPEED 3400
NO.
I'l.ATB
■54449
—
42366 8901
56006
8901
56003
9000
52045 8901
Arm, upper and lower (solid) with 948n
and 54034....................................................
Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Front Bearing...................
Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Intermediate Bearing
Arm Oil Tube with 52045 for oiling 54326
“ “ “ Packing (braided cotton)...
E«03
8 PARTS FOR MACIITNF No. 147-29
NO. V1..VIE N,\ME
54002 8902 Arm Rock Shaft.................................................
51079
--------
“ “ “ 54002 with 54004, 54005
and 04255
OlliSO 8901 Ann Rock Sliaft Hushing (back)
01.187
--------
“ “ “ “ “ 0 4 3 8 0
...................................................
........................
with 52045..................................................
440c 8901 -Arm Rock Shaft Hushing (l)ack) Set Screw 01388 8901 •' “ " “ (intermediate) 01389
-----
04388 with 52045.......................................
423c 8901 Arm Rock Shaft Hushing (intermediate)
Set Screw....................................................
52045 8901 Arm Rock Sliaft Hushing Oil I’ad (braided
cotton).........................................................
54004 8901 -Arm Rock Shaft Collar with two 453c. . .
453c 8901 “ “ “ “ SetScrew
54005 8901 “ “ “ Crank (back) with two
50083c
........................................................
50083(.’ 8901 Arm Rock Siiaft Ch'iink (back) Set Screw. 04255 8911 “ “ “ “ (front) with 453c
2117 8901 “ “ “ “ “ Pin............
453c 8901 “ “ “ “ “ Set Screw 54105 8901 “ “ “ Flanged Hushing (front) 52015 8901
Oil Pad (braided cotton)
.............................
453c 8901 Arm Rock Shaft I'danged Hushing (front)
Set Screw....................................................
54000 9850 Arm Rotary Shaft 08017
--------
“ “ 54000 with04()E, 54088,
..............................................
54383, 54450, 04351, 64355, ()8010 and
08018..........................................................
54307 9000 Arm Rotary Shaft Hushing (front)
....................
701k 8901 “ “ “ “ “ Set
Screw..........................................................
54007 8902 Arm Rotary Shaft Hushing (intermediate) 54089
-------­54007 with 04508 and 04805
.....................
04508 8902 Arm Rotary Shaft Hushing (intermediate)
Oil Pad, long (braided cotton)
....................
04805 9000 Arm Rotary Shaft Hushing (intermediate)
Oil Pad, short (braided cotton)
...................
422c 8901 .Arm Rotary Shaft Hushing (intermediate)
Set Screw (long)
.........................................
50084c 8901 Arm Rotary Shaft Hushing (intermediate)
Set Screw (short)
........................................
54450 9(X)0 .Arm Rotary Shaft Collar with two 1258c
1258c 8901 “ “ “ “ Set Screw
...............
.......
l^ARTS FOR MACHINE No. 147-29
NO. I'L.CTE NAME
54009 8902 .Arm Rotary Shaft Flanged Bushing 54090 ----------- “ “ “ “ “ 54009
with 580;i9 and 64805
................................
58039 8902 .Arm Rotary Shaft Flanged Bushing Oil
Pad, long (braided cotton)...........................
04805 9000 Arm Rotary Shaft Flanged Bushing Oil
Pad, short (braided cotton)..........................
159k 8001 Arm Rotary Shaft Flanged Bushing Screw
49013 8904 “ “ “ Front Bearing Oil Pad
(braided cotton)...........................................
1441) 8901 .Arm Rotary Shaft Screw
15190 8902 “ Side Cover (back)
..................................
..............................
2801)8904 “ “ “ “ Thumbscrew...
54010 8904 “ “ “ (front)
..............................
280u 8904 “ “ “ “ Thumbscrew...
04259 8913 Balance Wheel with two 430c
430c 8904 “ “ Set Screw
..............................
..................................
08142 9850 Cloth Plate..........................................................
08145 9850 “ “ Extension
1011k 8904 “ “ “ Screw
....................................
...............................
51309 9000 “ “ Oil Tube with 49092, for
oiling 54458
49092 8908 Cloth Plate Oil Tube Packing (felt)
................................................
...................
54012 8902 “ “ Slide (left).................................
38419 '8904 “ “ “ “ Spring
725j 8904 “ “ “ “ “ Screw
54013
------
Cloth Plate Slide (left) complete. Nos.
38419, 54012 and two 725j
54014 8913 Cloth Plate Slide (right) for 54015 54055 9808 “ “ “ “ “ 54050 08100
----------
“ “ “ “ “ 08107
...................
......
........................
............
............
............
38410 8904 “ “ “ “ Spring.......................
725j 8904 “ “ “ (left) Spring Screw
54015
------
Cloth Plate Slide (right) complete, for
......
08144, Nos. 38419, 54014 and two 725i
54050
--------
Cloth Plato Slide (right) complete for
08143, Nos. 38419, 54055 and two 725j
08107
--------
Cloth Plate Slide (right) complete for
08248, Nos. 38419, 68160 and two725j.
08144
--------
Cloth I’late complete, for Д in. to ^ in.
gauges, for 46089, Nos. 54013, 54015,
54309 and 68142.........................................
68143
--------
Cloth Plate complete, for ^ in. to in.
gauges, for 46090, Nos. 54013, 54056,
54309 and 68142.........................................
...
]0 1-
AKTS I'XIR MACHINE No. 117-29
PARTS FOR MACHINE No. 117-29
11
NO. I'l.ATE
0821S
--------
101If 8901
50178F 8901
08 IK) 9859
50178F 8901
12:S5f 8901
51017 8902
51088
---------
50009c 8901
1510f 8901
01208 8901
*57222
*51018
51218 8901
01209
10111
51019 51020 57225
51111
08018
*51112
10081 9852
------
S90e 8901
---------
1057e 8901
51897 8901
0575
8901 8918 8911
280i)
8901 8902 8902 8901
158c
8901 8902
---------
------
890e 8901
1057e 8901 51028 8911 21500 8901
157c 8901
157w 8901
50129c 8901
NAME
Cloth Pliit.e coiiipleto, for in. to ?sin.
Kiiuge.s, for 10090, Nos. 51018, 51809,
()S112 and 08107
(doth Plate Screw (left)
“ “ Thread Guard
.......................................
..................................
“ (Hght)
.................................
...........................
“ “ “ “ Screw (long).. “ “ “ “ “ (short).
Crank Connecting Rod with 0575, 51018,
51218, 54897, 57222 and two each 890e
and 1057e
...................................................
Crank Connecting Rod 51017 with SOOtiOc
U (( U ii U U
“ Rail Screw Stud
Nnl..............................................................
Crank Connecting Rod Rail Screw Stud
Washer........................................................
Crank Connecting Hod Cap (lower)
..............
“ “ “ “ Screw
“ “ “ “ (u])per)...........
“ “ “ “ “ Screw “ “ “ Oil Cup
................
“ “ “ “ Pad (braided
cotton).........................................................
(hank (hninectiiig Rod Oil Pad Sto)) Pin
Ihute Plate.......................................................
“ “ Pin...................................................
“ “ Tliunil) Screw
Feed Rar with 50129c and two 158c
“ “ Connection
.................................
..............
........................................
“ “ Hinge Pin...........................................
“ “ “ “ Set S(;rew
.....................
Connecting Hod with 1057e, 51112
and two 890e
..............................................
Feed Connecting Rod 51111 with 51150..
“
“ “ “ “ Screw'
........................
................
“ “ “ Clamping Screw.. . “ “ “ Hinge Pin “ “ “ “ " Collar
with 457c
....................................................
Foal Connecting Rod Hinge Pin ('ollar
Set Screw....................................................
Feed Dog, 17 teeth (10 teeth to the inch)
for 10090
....................................................
Feed Dog Screw.............................................
“ Stop Screw
......................................
................
NO. I'l.ATE NAME
*51021 *51155 -------- “ “ Body
------
p'eed Eccentric
...................................................
............................................
118c 8901 “ “ “ Set Screw.
......
7071 8901 “ “ Clamping Washer
................
.................
2171) 8901 “ “ “ “ Screw..
51151) 9000 Feed Eccentric (adjustable) complete. Nos. 217i),'1103c, 7071, 51024, 54455
and two 443c...............................................
1103c 8904 Feed Regulating Screw
.......................................
51020 9851 “ Rocking Frame with two 453c 54077
-----------
“ “ “ 54026 with 21506,
54019, 54020, 54023 and 57225
................
57231 8911 Feed Rocking Frame Hinge Pin 57235 9000 “ “ “ “ “ Rushing
153c 8901
Set Screw
....................................................
153c 8901 Feed Rocking Frame Hinge Pin Set Screw
51157 9801 “ Roll (lower) with two 50333c...................
08117 9851 “ “ “ Clutch (brake)
................
08118 9851 “ “ “ “ (drive).................
08119 9851 “ “ “ “ (brake) Connec
tion with 110c, 1700j and two 50083c..
110c 9853 Feed Roll (lower) Clutch (brake) Connec-
■ tion Adjusting Screw....................................
1700j 9853 Feed Roll (lower) Clutch (brake) Connec
tion Adjusting Screw Nut
...........................
50083c 8901 Fecal Roll (lower) Clutch (brake) Connec
tion Set Screw
.............................................
127530 9000 Feed Roll (lower) Clutch (brake) Connec
tion Stop Rlock
...........................................
158d 9853 Feed Roll (lower) Clutch (brake) Connec
tion Stop Rlock Screw
................................
08150 9854 Feed Roll (lower) Clutch (drive) Connec
tion with two 50083c
..................................
50083c 8901 Feed Roll (lower) Clutch (drive) Connec
tion Set Screw
08151 9000 Feed Roll (lower) Clutch Roller
.............................................
..............
08152 9000 “ “ “ “ “ Plunger. 08153 9000 “ “ “ “ “ Spring.. 08151 9850 “ “ “ “ Shaft... 08157
----
“ “ “ “ “ 68154with
68156
..........................................................
.....................
51467 9859 Feed Roll (lower) Clutch Shaft Rracket..
68207
-------
Feed Roll (lower) Clutch Shaft Rracket
comi)lele, Nos. 54457, 54467, 68157,
127530 and two each 158n and 62562..
...
...
12 PARTS FOR MACHINE No. 147-29
PARTS FOR MACHINE No. 147-29
13
NO. ri..vrh; N.\MB
G2562 9000 Feed Roll (lower) Cluteli Slnift llraeket
Collar with dO.lc........................................
4G.ic 8909 Feed Roll (lower) Cluteh Shaft Bracket
Collar Set Screw.........................................
94Sd 8958 Feed Roll (lower) Clutch Shaft Bra(;ket
Screw..........................................................
08155 9854 Feed Roll (lower) Clutch Sleeve with four
11490..........................................................
1149c 9853 Feed Roll (lower) Cluteh Sleeve Set Screw
08150
--------
Feetl Roll (lower) Clutch eom])lete, Nos.
08147 to 08150, 08155 and six each (¡8151 to 08153
..........................................
54458 9854 Feed Roll (lower) Connecting Rod with
51112 and two 890b...................................
08016
--------
Feed Roil (lowei ) Connecting Rod 54458
with 54450..................................................
*54112
------
Feed Roll (lower) Connecting Rod Cap
890e 8904
Screw..........................................................
1257c 9853 Feed Roll (lower) Connecting Rod Hinge
Screw..........................................................
1020e 9853 Feed Roll (lowei ) Clonnecting Hod Hinge
*54024
*54455
Screw Nut
------
Feed Roll (lower) Eccentric
--------
“ “ “ “ Body
...................................................
..............................
.....................
443c 8904 “ “ “ “ “Set
Screw..........................................................
7071 8904 Feed Roll (lower) Eccentric Clamping
Washer
.......................................................
217n 8904 Feed Roll (lower) Eccentric Clamping
Washer Screw
............................................
54450 9000 Feed Roll (lower) Eccentric (adjustable)
complete, Nos.217n, 1103c, 7071,54024, 54455 and two 443c
...................................
1103c 8904 Feed Roll (lower) Eccentric Regulating
Screw..........................................................
50333c 9853 Feed Roll (lower) Set Screw
54457 9864 “ “ (upper) with two 50333c
127534 9851 “ “ “ Bar
..............................
.................
..................................
54469 9851 “ “ “ “ Bracket with 453c 51470
--------
Feed Roll (upper) Bar Bracket complete.
Nos. 79c, 800c, 913n, 1330c, 1876, 23404, 38648, 54469, 54471 to 54473, 54475, 127534, 127536, 127542 and two
208i)............................................................
1193d 9853 Feed Roll (upper) Bar Bracket Screw
(lower)........................................................
NO. PLATE NAME
769c 9853 Feed Roll (upper) Bar Bracket Screw
(upper).........................................................
127536 9000 Feed Roll (upper) Bar Collar with 448c..
1870 9000 “ “ “ “ “ Roller and
Screw Stud
..................................................
448c 8958 Feed Roll (upper) Bar Collar Set Screw..
23404 9000 “ “ “ “ Spring
127538 9854 “ “ “ Bracket with 453c,.. .
54475
--------- “ “ “ “ 127538 with
54457 and 127546.......................................
127542 9000 Feed Roll (upper) Bracket Guide Pin.. . .
453c 8901 “ “ “ “ “ “ Set
Screw
..........................................................
453c 8901 Feed Roll (upper) Bracket Set Screw
54471 9855 “ “ “ Lifter
......................
860c 9853 “ “ “ “ Hinge Screw....
54472 9855 “ “ “ “ Latch
79c 9853 “ “ “ “ “ Hinge
Screw...........................................................
38048 9856 Feed Roll (upper) Lifter Latch Spring..
54473 9856 “ “ “ “ “Stop
208d 8910
Screw'..........................................................
1330c 9853 Feed Roll (upper) Lifter Stop Screw. .
913n
-------
“ “ “ Pressure Regulating
'rhumb Screw
50333c 9853 Feed Roll (upper) Set Screw
127546 9856 “ “ “ Shaft
,('54106) 9856 Looper (back) closed eye
Note: When ordering No. 54106, state gauge of
..............................................
...............................
.......................
.....................................
machine for which required.
1147c 8922 Looper (back) Set Screw
r:;/4 2(^(51107) 9856 “ (front) closed eye
Note: When ordering No, 54107 state gauge of
.....................................
...............................
machine for which required.
1120c 8958 Looper (front) Set Screw.....................................
54027 8900 “ Carrier with two 171n
17Id 8958 “ “ Adjusting Screw
54227 8960 “ “ Connection.................................
54228 8960 “ “ “ Shaft
54229 8960 “ “ “ “ Bushing
446c 8901
Set Screw.....................................................
49013 8904 Looper Carrier Connection Shaft Oil Pad
(braided cotton)...........................................
54230 8960 Looper Carrier Driver with 54032 and
four 175e.....................................................
...................
--
................
.............................
........................
................
11
PARTS FOR MACHINK No. 147-2!)
PARTS FOR MACHINE No. 147-29
15
NO. I’l.ATE
*51032
*51034 ---------
------
175e 8908
54308 9850
51383
---------
54080 8!)00
701e 8901
948i> 89.58
04315 8900
227i) 89.58
40320 !)850
040e 8908
54001 8922
704 w 89.58 04319 8i)22 51002
---------
54003
------
38450 8991
1133E 8958
C4320 8!)91
1I33E 89.58
,54320 8i)91
54327 8991
1520.( 8991
51328 8991
187u 8958
54004 8922 54005 8922 54000 8922 54007 8922 54008 8922
NAME
Luopcr Currier Driver Cap.............................
“ “ “ “ Screw
................
“ Driving Sliaft and Feed Rifling
liccentric willi 227i) and two 04315.. . .
Looper Driving Sliaft and Feed Lifting
Fcceniric 54308 with 54027, 51227,
51228 and ,54230
.......................................
Looper Driving Shaft and Feed Lifting
liceentric Bracket with 701 e
......................
Looper Driving Shaft and Feed Lifting
Kccentrio Bracket Bushing
........................
Loojier Driving Shaft and Feed Lifting
F(a:entric Bracket Bushing Set Screw..
Lno))er Driving Shaft and Feed Lifting
Eccentric Bracket Screw
............................
L()0|K!r Driving Shaft and Feed Lifting
Eccentric Oil Hole Plug
.............................
Looper Driving Shaft and Feed Lifting
Eccentric Oil Hole Plug Screw
..................
Looper Driving Shaft and Feed Lifting
I'lccenlric Oil Pad (braided cotton). . . .
Looper Driving Shaft and Feed Lifting
Eccentric Screw
...................................
Looper Holder with 1120c and 1147c.
“ “ Screw
.Needle Bar (hollow)
..................................
...............................
Needle Bar complete, for o hi. to in
gauges. Nos. .54004, 54005 and 04319.
Needle Bar complete, for ^ in. to in
gauge,s, Nos. 54004, .54000 and 04319
Needle Bar Bushing (lower)......................
“ “ “ “ Set Screw. “ “ “ (upper)
.................
“ “ “ “ Set Screw. “ “ Connecting Link “ “ “ “ Hinge Stud
u u a u a u
...............
Nut..............................................................
Needle Bar Connecting Stud with 21 Ip
and two 187e.................................................
Needle Bar Connecting Stud Clamping
Screw........................................................
Needle Clamp with two 1498r
.....................
“ “ Thread Guard, for 54002.
“ “ “ “ “ .54003. “ Guard, for j2 in. to i-i hi. gauges “ “ “ in. to /2 in. gauges
NO. l'I,.ATE NAME
54009 8922 Needle Guard, for ft, in. to in. gauges. .54038 8991 “ “ Holder
....................................
170d 89.58 “ “ “ Screw.............................
217f 8904 “ “ Screw......................................
1498f 8922 “ Set Screw
54108
--------
,54109
Oil Tube...............................................................
-------
“ “ Bracket..'.............................................
................................................
49092 8908 “ “ Packing (felt)......................................
54110 8908 Oil Tube complete, for oiling Crank Con
necting Rod (upper bearing) Nos. 49092,
,54108 and 54109
04.830 98.55 Presser Bar with 25303 25303 9850 “ “ Ball, size Yi in 04331 8911 “ “ Bushing (lower)
.......................................
.......................................
...........................
.....................
1133k 89,58 “ “ “ “ Set Screw...
38450 8991 “ “ “ (upper)
1133k 89.58 “ “ “ “ Set Screw..
54039 8908 “ “ Guide Bracket with 453c,
OlOw and 1903...........................................
GlOw 8908 Presser Bar Guide Bracket Adjusting
Screw...........................................................
11173 8908 Presser Bar Guide Bracket Guide
.........................
447c 8908 “ “ “ “ “ Set
Screw...........................................................
1903 8908 Pre.sser Bar Guide Bracket Roller and Stud
4.53 c 8901 “ “ “ “ Set Screw....
54474 9850 “ “ Lifter..........................................
572.58 8911 “ “ “ Hinge Pin.....................
447c 8908 “ “ “ “ “ Set Screw. .
1872 8908 “ “ “ Roller and Stud
...........
12.50c 8911 “ “ “ Stop Screw..........................
01047 8911 “ “ Lifting Bracket with 400c
and 1872......................................................
08208 9855 Presser Bar Lifting Lever......................................
01075 8911 “ “ “ “ Connecting
Stud
.............................................................
400c 8910 Presser Bar Lifting Lever Connecting
Stud Set Screw............................................
08184 98.55 Pre.sser Bar Lifting Lever Extension...................
lOli) 8908 “ “ “ “ “ Screw
(left)
...........................................................
170o 8958 Presser Bar Lifting Lever Extension Screw
(right)..........................................................
802u 8908 Presser Bar Lifting Lever Hinge Screw...
54040 9855 “ “ Spring (flat)
38408 8908 “ “ “ Stud
...............................
....................................
20270 8911 “ Foot Hinge Pin........................................
..
10 PARTS FOR MACHINE No. 147-29
PARTS FOR MACHINE No. 147-29
17
NO. I‘L.4TE N.\ME
53075
--------
40087
Presser I'oot Plate
--------
“ “ Shank
..............................................
..........................................
53070 9857 lV(;sser Foot (hinged) complete, Nos.
20270, 40087 and 53075
190o 8908 Presser J'’oot Screw
...........................................
............................
574w 8908 Pre.ssure Regulating Thumb Screw..................
1539w 8908 “ “ “ “ Lock
Nut..............................................................
54381 9850 Slack Thread Controller
....................................
54242 9850 “ “ “ Clamp.
190r> 8908 “ “ “ “ Screw...
04337 8922 “ “ Regulator......................................
54042 8908 “ “ “ Holder with 175b
and 50150c
.................................................
175b 8908 Slack Thread Regulator Holder Clamj)ing
Screw..........................................................
54043 8908 Slack Thread Regulator Holder Shaft 24292 8908
Collar with 1019c.......................................
1019c 8908 Slack Thread Regulator Holder Shaft
Collar Set Screw.........................................
54044 8908 Slack 'I’lireail Regulator Holder Shaft
Crank (forked) wilh 1253c
.........................
1253c 8908 Slack 'I’liread Regulator Holder Shaft
(.¡rank Set Screw........................................
50150c 8908 Slack Thread Regulator Set Screw.....................
2102 8909 Tension (under thread) Disc..............................
51.570c 9853 “ “ “ Regulating
Tlumd) Nut.................................................
5032Gc 9853 Tension (under thread) Screw Stud 59539
--------
“ “ “ “ “ 5032()c
...................
with 51570c................................................
59534 9858 d'ension (under thread) Sjning 59537 98.58 “ “ “ “ Bushing
(hirge).........................................................
59538 9858 d'eiiBion (under thread) Spring Bushing
(small)
........................................................
17547 8909 Tension (under tiiread) Thread Guide. . . 54070 8990 “ (ujiiier thread) Bracket
..........................
3701) 8909 “ “ “ “ Screw...
2102 8909 “ “ “ Disc
51570c 9853 “ “ “ Regulating
d'hund) Nut.................................................
32572 8909 Tension (upi)er thread) Releasing Disc.. .
54988 8909 “ “ “ “ Pin....
54071 8922 “ “ “ “ Shaft
....
...
.....
NO. PI.ATK NAME
54047 8909 Tension (upper thread) Releasing Shaft
Crank with 024c
.........................................
54048 8909 Tension (upper thread) Releasing Shaft
Crank Link..................................................
024c 8909 Tension (upper thread) Releasing Shaft
08261
Crank Set Screw
------
Tension (upper thread) Releasing Shaft
.........................................
Spring..........................................................
316k 8909 Tension (upper thread) Releasing Shaft
Stop Screw..................................................
1547j 8909 Temsion (upper thread) Releasing Shaft
Stop Screw Nut...........................................
,50326c 9853 Tension (u])per thread) Screw Stud
...................
59539 “ “ “ “ “ 50326c
with 51570c.................................................
59535 9858 Tension (upper thread) Spring
...........................
59537 9858 “ “ “ “ Bushing
(large)..........................................................
59538 9858 Tension (upper thread) Spring Bushing
(.small)........................................................
57076 9858 Tension (upper thread) Thread Guide...
53225 9858 Thread (under) Eyelet (back)................................
190i) 8908 “ “ “ “ Screw
54072 9858 “ “ “ (front)
..................
04351 8909 “ “ Nipper Cam with 465c. .
465c 8909 “ “ “ “ Set Screw. . 38210 8909 “ “ “ Spring (lower).. . 38211 8909 “ “ “ “ (upper) 40247 8909 “ “ “ “ “
Stoj).............................................................
176u 8958 Thread (under) Nipper Spring Screw. . . .
38175 8910 “ “ Take-up with 465c....................
405c 8909 “ “ “ Set Screw
............
51435 9858 “ “ “ Staple with 590n
and 38481....................................................
54(119 9855 d'hread (under) Take-up Sta|)le Bracket
with 460c.....................................................
965i) 8910 Thread (under) Take-up Staple Bracket
Screw...........................................................
46041 8909 Thread (under) Take-up Staple Spring
190u 8908
Screw...........................................................
38181 8910 Thread (under) Take-up Staple Thread
Guard
..........................................................
590i) 8958 Thread (under) Take-up Staple Thread
Guard Screw................................................
.......
18 Pi'
NO.
I'AirrS FOR MACHINE No. 147-29
PI.ATE
38482 8910
207n 8910
8910
64355
64356 8910
8910
460c
51330
9858 8910
207n
46009 9858
190d
8908 54094 8922 54095 8922 68164
9858
8922
14491)
54096
2 1 1 E
8958
9852
46090
742f 8910
(bra.ss)........................................................
Thread (under) Take-uj) Thread Guard
Steady I’in
..................................................
d’iu'ead (uniler) Take-\ip 'J'liread Guard
Steaily Pin Set Screw
Thread (upper) Controller
.................................
..............................
“ “ “ Screw.......................
Eyelet
.................................
“ “ “ Screw “ “ Take-up
..........................
....................................
Plate
“ “ “ Spring
ti U ii
Screw..........................................................
—
Tliiead (upper) 'I'ake-up l.•omplete, .No.s.
M49i). 51091, 54095 and 08101 'I'liread (u|)|)er) Take-u[) Set Screw 'I’liroat Plate, for in. to in. gauges,
for 40081....................................................
“ Screw.
Thread Guard
...................
...............
..............
19
LIST OF PARTS COMPLETE
FOR
евазч
MACHINE No. 147-38
Genuine Singer Needles and their Con tainers are marked with the Company’s
Trade Mark “SIMANCO.” i
Needles in Containers marked
“For Singer Machines”
are not Singer made needles.
FOR WORK ON AWNINGS, HEAVY OVERALLS, STITCHING
FRINGE AND TAPE TO RUGS AND WORK OF A SIMILAR NATURE REQUIRING A LONG NEEDLE BAR STROKE AND PULLER FEED. TWO NEEDLES, TWO LOOPERS, FOR TWO THREAD CHAIN STITCH. FOOT LIFTER. GAUGES
A TO 3/s INCH. NEEDLE BAR STROKE 1A INCH. UPPER THREAD NIPPER. THE MACHINE IS FITTED WITH UPPER AND UNDER CORRUGATED FEED ROLLS ATTACHED TO THE MACHINE TO ASSIST IN CARRYING THE MATERIAL FROM THE MACHINE AFTER BEING STITCHED. THE UNDER ROLL RECEIVES ITS MOTION FROM AN ADJUST ABLE ECCENTRIC ON THE ROTARY SHAFT, BEING IN DEPENDENTLY ADJUSTABLE TO BRING THE MOTION OF THE FEED ROLLS IN UNISON WITH THE FEEDING MECH ANISM. SPEED 2800.
Note: Fittings as listed are for Lap Seam Felling on
Awnings or work of a similar nature.
NO. nl.ATE NAME
*1)8217
------
Arm, upper and lower (solid) with 948n
and 54034....................................................
184ia—2
20 P
NO.
12;{(;о «001
50000 som
Ш10 simi
5(1000 0000 52015 SOOl
081 IS 0850 08110
----------
OlliSO 8001
oi:i87
--------
410r 8001 OIOSS 8001 01280
----------
42:i<' 8001
52015 8001
51001 8901
45:!(' 8901
51005 8901
500S:!i: 8901
01255 8011
2117 8001
45:i(! 8001 54105 8001 52015 8001
45:1c 8901
08110 9850
08218
----------
541107 9000
701c 8901
54007 8002 51089 --------
04508 8902
,\UTS FOR M.VCIIIN'K No, 1 17-:i8
N.CMK
.Anil Oil P;i<l (bniided coltoii) for oiling
.Arm Rock Shaft I’rimt Hearing................
Ann Oil Fad (braided cotton) for oiling
Arm Rock Shaft Iiitemiediale Hearing.
Arm Oil 'I’uhe with 52015, for oiling 081:17
“ “ “ “ “ “ “ 54:i20 “ “ “ Racking (hraideil cotton). . “ Rock Shaft
................................................
“ “ “ 08118 with 51001, 510t)5
and 01255
.Arm Rock Shaft Hn.shing (hack)
...................................................
.................
“ “ “ “ “ 0 1 :i 8 0
with 52015..................................................
Arm Rock Shaft Hu.ahiiig (back) Set Screw
“ “ “ “ (intermediate)
Oi:i88 with 52045
......................................
.Arm Roidv Shaft Huahiiig (intermediate)
Set Scrmv
...................................................
.Arm Rock Shaft HnahingOil Fad (braided
cotton)
........................................................
.Arm Rock Shaft Collar with two 45:ir; . .
“ “ “ “ Set Screw................
“ “ “ Crank (back) with two
5008:ic
.......................................................
.Arm Rock ShaftCrank (back) Set Screw
“ “ “ “ (front) with 45:ic “ “ “ “ “ Fin
...........
“ “ “ “ “ Set Screw “ “ “ h’langed Hushing (front )
Oil Fad (bnuded cotton)
.............................
Arm Rock Shaft Flanged Hushing (froni)
Set Screw....................................................
.Arm Rotary Shaft..........................................
“ “ “ OSllOwithOiOic, 54t)88,
54:i8:i, 51450, 0i:i51, 0 t:i55, 08010 and
08018..........................................................
Arm Rotary Shaft Hushing (front).................
“ “ “ “ “ Set
Screw..........................................................
Arm Rotary Shaft Hushing (intermediate)
U U U it
54007 with 04508 anil 04805
....................
Arm Rotary Shaft Hushing (intermediate)
Oil Fad, long (braided cotton)
...................
PARTS FOR M.VCHINE No. 117-38
NO. CI..VTE NAME
01805 9000 Arm Rotary Shaft Hushing (intermediate)
Oil Fad, short (braided cotton)
...................
422() 8901 Arm Rotary Sh.ift Hushing (intenneiliale)
Set Screw (long)
.........................................
50081<j 8901 .Arm Rotary Shaft Hushing (intermediate)
Set Screw (short)
........................................
54150 9000 Arm Rotary Shaft Collar with two 1258c
1258c 8901 “ “ “ “ Set Screw 54000 8902 “ “ “ Flanged Hushing 54090
----------
“ “ “ “ “ 54009
with 58039 and 64805
................................
58039 8902 .Arm Rotary Shaft Flanged Hushing Oil
Fad, long (braided cotlon)..........................
Ü4805 9000 Arm Rotary Shaft Flanged Bushing Oil
Fad, short (braided cotton)
.........................
159e 8901 i\rm Rotary Shaft Flanged Hushing Screw
49013 8904 “ “ “ Front, Hearing Oil Fad
(braided cotton)
1 l ln 8901 .Arm Rotary Shaft Screw
15190 8902 “ Side Cover (baek)
..........................................
...................................
..............................
280n 8904 “ “ “ “ Thumb Screw . . .
540 to 8904 “ “ “ (front)
..............................
2861) 8904 “ “ “ “ Thumbscrew...
54210 9855 Balance Wheel, ‘¿Ys in. imllcy, with two
430c.............................................................
430c 8904 Balance Wheel Set Screw
...................................
68142 9850 Cloth Plate..........................................................
68115 9850 “ “ Flxtension....................................
lOllF 8904 “ “ “ Screw
...............................
54309 9000 “ “ OilTube with 49092, for oiling
54458
..........................................................
49092 8908 Cloth Plate Oil Tube Packing (felt)
...................
51012 8902 “ “ Slide (left).................................
38419 8904 “ “ “ “ Spring
725.1 8904 “ “ “ “ “ Screw
54013
--------
Cloth Plate Slide (left) complete, Nos
38419, 54012 and two 725.(
68191
-----
Clot h Plate Slide (right) for 68192
38419 8904 “ “ “ “ Spring
..................
.......
.....................
..................
................
7251 8904 “ “ “ “ “ Screw..
68192
------
Cloth Plate Slide (right) complete, Nos
38419, 68191 and two 725j........................
08260
--------
Cloth Plate complete, for in. to in
gaufees, for 68198, Nos. 54013, 54309,
68142 and 68192
lOllE 8904 Cloth Plate Screw (left)...........................................
........................................
504 73f 8904 “ “ “ (right)..................................
21
.....
...
22 PARTS FOR MAÌ^IINE No. 147-38
NO. PL.-iTE N.\ME
()814() 9S.')9 Cloth Piale Thrciiil Guard
...............................
50473F 8<)04 “ “ “ “ Serew (lont')..
123.5F 8904 “ “ “ “ “ (short).
54017 8902 Crank Conncetiiifi Rod with 657.5, 54018,
54218, 518ÌI7, 57222 and two ea(di 896e
and I057e....................................................
51t)88
-------
Crank Conneeting Rod 54017 with 50069c
50069c StIOl “ “ “ Ihdl Screw Stud
1516e 8904
Nut..............................................................
642f)8 8!)01 Crank Connecting Rod Ball Screw Stud
Washer........................................................
*57222
----
Crank ('onnecting Rod Cap (lower)
.....
896e 8901 " “ “ “ “ Screw
*.54t)18
----
“ “ “ “ (upper)
.......
1057IO 8904 “ “ “ “ “ Screw
,51,897 .8901 “ “ “ Oil Cup
..................
51218 8901 “ “ “ “ Fad (braideil
cotton)
........................................................
6575 8901 Crank Connecting Rod Oil Pari Stop Pin
61269 8913 Face Plate
........................................................
16111 8911 “ “ Pin...................................................
286n 8901 “ “ 'riuindi Screw
54488
------
I'eed Bar wit li 50129c and two 4.53c 51020 8t)02 '• “ Connection 57225 8901 “ “ Hinge Pin
.................................
..............
......................................
.........................................
1.53c 8901 “ “ “ " Set Screw......................
51111 8902 Cijnnecting Rod with 1057e, 51112
t)8018
---------
Feed Coniuading Rod 51111 with 51156.,
*51112
------
“ “ “ Gap
89f)E 8901 “ “ “ “ S(wew
and two 89f')E
............................................
..........................
................
10.57E ,8901 “ “ “ Clamping Screw.. .
,51023 ,8911 “ “ “ Hinge Pin
.................
21,506 8901 “ “ “ “ “ Collar
with 457c....................................................
157c 8904 I’eed Coniuicting Rod Hinge Pin Collar
Set Screw....................................................
68191 98.52 l'’eed Dog, 11 teeth (10 teeth to the inch)
for 68198
I,57w8901 Feed Dog Screw
....................................................
................................................
5012ÌÌC 8t)01 “ “ Stoj) Screw......................................
*51021 *.514,55
------
“ Eccentric
-------
“ “ Body
143c 8901 “ “ “ Set Screw
.........................................................
............................................
.......................
7071 8904 “ “ Clainihng Wa.sher
................
2171)8904 “ “ “ “ Screw..
PARTS FOR MACHINE No. 147-38
NO. PL.-iTE NAME
54456 9000 F'eed Eccentric (adjustable) complete,
Nos. 217n, 1103c, 7071, 54024, 54455
and two 443c...............................................
1103c 8904 Feed Regulating Screw.......................................
54026 9851 “ Rocking FTame with two 453c G8022
---------
“ “ “ 54026, with 21506,
54020, 54023, 54488 and 57225
57234 8911 Feed Rocking FTame Hinge Pin
...........
................
..................
57235 9000 “ “ “ “ “ Bushing
453c 8901
Set Screw
....................................................
453c 8901 Feed Rocking Frame Hinge Pin Set Screw
54457 9864 “ Roll (lower) with two 50333c
...................
68147 9854 “ “ “ Clutch (brake)...............
68148 9854 “ “ “ “ (drive)
...............
68149 9854 “ “ “ (brake) Connec
tion with 440c, 1700j and two 50083c...
410c 9853 Feed Roll (lower) Clutch (brake) Connec
tion Adjusting Screw
..................................
1700j 9853 Feed Roll (lower) Clutch (brake) Connec
tion Adjusting Screw Nut
...........................
50083c 8901 Feed Roll (lower) Clutch (brake) Connec
tion Set Screw.............................................
127530 9000 Feed Roll (lower) Clutch (brake) Connec
tion Stop Block
...........................................
158d 9853 Feed Roll (lower) Clutch (brake) Connec
tion Stop Block Screw
................................
68150 9854 Feed Roll (lower) Clutch (drive) Connec
tion with two 50083c
..................................
50083c 8901 FTed Roll (lower) Clutch (drive) Connec
tion Set Screw.............................................
68151 9000 F’eed Roll (lower) Clutch Roller
..................
68152 9000 “ “ “ “ “ Plunger. 68153 9000 “ “ “ “ “ Spring.. 68154 9850 “ “ “ “ Shaft 08157 ---------- “ “ “ “ “ 68154 with
68156
................
..........................................
54467 9859 FTed Roll (lower) Clutch Shaft Bracket 68207 Feed Roll (lower) Clutch Shaft Bracket
complete. Nos. 54457, 64467, 68157,
127530 and two each 158d and 62562..
62562 9000 Feed Roll (lower) Clutch Shaft Bracket
Collar with 465c
.........................................
465c 8909 F'eed Roll (lower) Clutch Shaft Bracket
Collar Set Screw
.........................................
948o 8958 Feed Roll (lower) Clutch Shaft Bracket
Screw...........................................................
23
...
21 PAKTS l-'OK MACHINE No. 147-38
PARTS FÜR MACHINE No. 147-38
25
.N41. rl.ATE N.\MK
(iSl.T") 9851 Eec'il Holl (lower) Clutch Sleeve with four
1119c..........................................................
1 M9c 9853 ]ччч1 Roll (lower) Clutch Sleeve Set Screw
(18159
------
Feed Roll (lower) Clutch coiu/dete, Nos,
(18)17 to (18150, (18155 and .six each 11815110(18153
........................................
51158 9851 Fee(l Roll (lower) Connecting Rod with
51112 and two 89()E..................................
llHOUi
-------
Feed Roll (lower) Connecting Rod 54458
*51112
--------
with 5115(1
F'eed Roll (lower) Connecting Rod Cap
................................................
S'KlE 89(M
Screw..........................................................
1257c 9853 Feed Roll (lower) Coimccling Rod Hinge
Screw..........................................................
1()2(1e 9853 h'ecd Roll (lower) Connecting Hod Hinge
Scianv Nut..................................................
*51021
--------
*51155
Feed Roll (lower) Eccentric
------
■“ “ “ “ Rody
...............................
......................
1-13<; 8904 “ “ “ “ " Set
Screw..........................................................
7071 8904 Feed Roll (lower) liccentric Clamping
Washer
......................................................
217u 8904 Feed Roll (lower) Eccentric Clamping
AVasher Screw
...........................................
51156 9000 Feed Roll (lower) Eccentric (adjustable)
complete, Nos.217i), 1103c, 7071, 54024,
51455 and two 443o
...................................
1103c 8904 Feed Roll (lower) Eccentric Regulating
Screw..........................................................
50333c 9853 Feed Roll (lower) Set Screw 54157 9864 “ “ (np|)er) with two 50333c
127.534 9851 “ “ “ liar
..............................
.................
...............................
.51469 9851 “ “ “ “ llraeket with 453c 54470
--------
Feed Roll (ui>per) Bar Bracket complete,
Nos. 79c, 86t)c, 913d, 1330c, 1870, 23404, 38648, 544Ü9, 54471 to 54473, 54475, 127534, 127536, 127542 and two
208i)............................................................
lJ93i> 9853 I’eed Roll (((¡>))er) Bar Bracket Screw
(lower)........................................................
769c 9853 Feed Roll (upper) Bar Bracket Screw
(uPlXir)
......................................................
127536 9000 Feed Roll (upper) Bar Collar with 448c..
1876 9000 “ “ “ “ “ Roller and
Screw Stud..................................................
NO, Pl.-VTK NAME
448c 8958 Feed Roll (upper) Bar Collar Set Screw..
23401 9000 “ “ “ “ Spring.............
127538 9854 “ “ “ Bracket with 453c. . ,
51175
-------------
“ “ “ “ 127538 with
54457 and 127546
..................■.................
127542 9000 Feed Roll (u[)per) Bracket Guide Pin.. . .
453c 8901 “ “ " “ “ “ Set
Screw,..........................................................
453c; 8001 Feed Roll (miper) Bracket Set Screw, . . .
51471 9855 “ “ “ Lifter...................................
866o 9853 “ “ “ “ Hinge Screw
54472 9855 “ “ “ “ Latch
..................
79c 9853 “ “ “ “ “ Hinge
Screw
..........................................................
38618 9856 Feed Roll (upjier) Lifter Latch Spring, .. . 54473 9856 “ “ “ “ “ Stop
208n 8910 “ “ “ “ “ “ Screw
1330c 9853 “ “ “ “ Stop Screw
913d
------------
“ “ “ Pjres'suro Regulating
.........
Thumb Screw..............................................
60333c 9853 Feed Roll (upper) Set Screw...............................
127546 9856 “ “ “ Shaft...................................
54106 9856 Looper (hack) closed eye......................................
Noth; When ordering No. 54106, state gauge of
machine for which required.
1147c 8922 Looper (hack) Set Screw
....................................
51107 9856 “ (front) closed eye..............................
Note; When ordering No. 54107, state gauge of
machine for which required.
1120c 8958 liOoper (front) Set Screw
...................................
51027 8960 “ Carrier with two 171d...............................
171d 8958 “ “ Adjusting Screw
........................
54227 8960 “ “ Connection............................
54228 8900 “ “ “ Shaft................
54229 8900 “ “ “ “ Bushing
446c 8901 “ “ “
Set Screw
....................................................
49013 8904 Looper Carrier Connection Shaft Oil Pad
(braided cotton)
..........................................
54230 8960 Looper Carrier Driver with 54032 and four
175e
............................................................
*54032
-------- Looper Carrier Driver Cap.................................
175b 8908 “ “ “ “ Screw.................
54368 9856 “ Driving Shaft and Feed Lifting
Eccentric with 227d and two 64315....
-----
.....
2()
PARTS POR MACIIINK No. 147-38
PARTS FOR MACHINE No. 147-38
27
NO. PLATE NAMp;
51383
--------
liOoper Driving Shafl and Peed Lifting
Kccentrii- 513GS with 54027, 54227,
54228 and 54230........................................
*54034
------ Looper Driving Shaft and Peed Lifting Eeeontrio Bracket with 7l)ln
.....................
54080 8960 Looper Driving Sliaft and Peed lafting
Eccentric Bracket Birshing
........................
701E 8901 Looper Driving Shaft and Peed Lifting
Eccentric Bracket Bushing Set Screw..
048u 8958 Looper Driving Shaft and Peed Lifting
Eccentric Bracket Screw
............................
64315 8960 Looper Driving Shaft and Peed Lifting
Eccentric Oil Hole Idug
.............................
227n 8958 Looper Driving Shaft and Peed Lifting
Plcccntric Oil Hole Plug Screw
.................
40326 9856 Looper Driving Shaft and Peed Lifting
Eccentric Oil Pad (braided cotton)....
640e 8908 lajoper Driving Shaft and Peed Lifting
Eciicntric Screw
.........................................
54061 8922 Loo|)or Holder with 1120c and 1147c. . . .
704w 8958 “ “ Screw.........................................
64319 8922 Needle Bar (hollow) 54062
------
Needle Bar complete, for in- to \\ in.
............................................
gaugc.s, Nos. 51064, 54065 and 64319. .
54063
---------
Needle Bar complete, for -3% in. to ilg in.
gauges, Nos. 54064, 54066 and 64319, .
38456 8991
1133b 8958
64320 8991
1133E 8958
54326 8991 54327 8991
1520J 8991
Needle Bar Bushing (lower)
“ “ “ “ Set Screw. . . “ “ “ (upper)
“ “ “ “ Set Screw...
“ “ Connecting Link...........................
“ “ “ “ Hinge Stud
ii U (( (i u u
..........................
Nut..............................................................
54328 8991
Needle Bar Connecting Stud with 211f
and two 187b..............................................
187e 8958
Needle Bar Connecting Stud Clamping
Screw..........................................................
54064 8922 Needle Clamj) w'ith two 1498p’
.......................
54065 8922 “ “ Thread Guard for 54062. . 51066 8922 “ “ “ “ “ 54063.. 68197 9858 “ Guard, for ]4, in. to Pg iu- gauges. 54038 8991 “ “ Holder
176d 8958 “ “ “ Screw
21 7f 8904 “ “ Screw
1498f 8922 “ Set Screw
................................
............................
.........................................
................................................
54108 Oil Tube..............................................................
NO. PLATE NAME
54109
------
Oil Tube Bracket
................................................
49092 8908 “ “ Packing (felt)......................................
54110 8908 Oil Tube complete, for oiling Crank Con
necting Rod (upper bearing) Nos. 49092,
54108 and 54109.........................................
64330 9855 Presser Bar with 25303
......................................
25303 9856 “ Ball, size И in...............................
64331 8911 “ “ Bushing (lower).....................
1133E 8958 “ “ “ “ Set Screw...
38456 8991 “ “ “ (upper)
.....................
1133E 8958 “ “ “ “ Set Screw..
54039 8908 “ “ Guide Bracket with 453c,
640w and 1963............................................
640w 8908 Presser Bar G\iide Bracket Adjusting
Screw...........................................................
11173 8908 Presser Bar Guide Bracket Guide.........................
447c 8908 “ “ “ “ “ Set
Screw...........................................................
1963 8908 Presser Bar Guide Bracket Roller and
Stud
.............................................................
453c 8901 Presser Bar Guide Bracket Set Screw....
54474 9856 “ “ Lifter 57258 8911 “ “ “ Hinge Pin
........................................
.....................
447c 8908 “ “ “ “ “ Set Screw. .
1872 8908 “ “ “ Roller and Stud
...........
1250c 8911 “ “ “ Stop Screw........................
61047 8911 “ “ Lifting Bracket with 460c and
1872
............................................................
.
68208 9855 Presser Bar Lifting Lever 61075 8911 “ “ “ “ Connecting
Stud
.............................................................
..................................
460c 8910 Presser Bar Lifting Lever Connecting
Stud Set Screw
............................................
68184 9855 Presser Bar Lifting Lever Extension.....................
loin 8908 “ “ “ “ “ Screw
(left)
...........................................................
176i) 8958 Presser Bar Lifting Lever Extension Screw
(right)..........................................................
802n 8908 Presser Bar Lifting Lever Hinge Screw...
54040 9855 “ “ Si)ring (flat)............................
38468 8908 “ “ “ Stud 26276 8911 “ Foot Hinge Pin 68219
--------
“ “ Plate..............................................
............................
........................................
46087 —— “ “ Shank............................................
68220 9857 Presser Foot (hinged) complete, for ^ in.
to % in. gauges, forlapseam feller, Nos. 26276, 46087 and 68119
............................
2.S PAiri'S FOR MACIIIXK X(j. 117-38
PARTS FOR MACHINE No. 147-38
29
NO. NAM77
I90i) 8908 I’roHser Foot Screw
..........................................
573w 8908 Rrcssure Itegulutiiig 'riuiml) Screw..................
ir)39w8908 “ “ “ “ 1-oek
Nut..............................................................
.")1381 OS.")!) Sleek 3'lir(ci(l ('onl roller 51212 9850 “ ‘‘ “ Cliim|)
..............................
..................
1901)8908 “ “ “ “ Screw...
08199 9858 “ Regulator
.....................................
51042 8908 " “ '■ Holder with 175ii
and 50150o.................................................
175k 8908 Slack Thread Regulator Holder Clainiiing
Staew
..........................................................
51(113 8908 Slack I'liread Regulator Holder Shaft 21292 8908
('ollar with 1019c
.......................................
1019c 8908 Slack Thread Regulator Holder Shaft
('ollar Set Screw
.........................................
51011 8908 Slac-k 'I'liread Regulator Holder Shaft
drank (forked) witli 1253c
.........................
T253i; 8908 Slack 'I'liread Regulator Holder Shaft
('rank Set Screw
50150c 8908 Slack 'I’hrcad Regulator Set Screw
.........................................
...................
2102 8909 'I'cnxion (under thread) Di.sc...............................
51570c 98.53 “ “ “ Regulating
'I'huinh Nut.................................................
5032()C 9853 Tension (under thread) Screw Stud 59539
--------
“ “ “ “ “ 503‘26c
..................
with 51570c................................................
59,534 9858 'rension (under thread) Spring
............................
59537 9858 “ “ “ “ Bushing
(Inrgn)
........................................................
59538 9858 Tension (under thread) Spring Bushing
(small)
........................................................
17517 8909 Tiaision (under thread) Thread Guido. .
51070 89;)(i “ (upper thread) Bracket
..................
370n 8909 “ “ “ “ Screw..
2102 8909 “ “ “ Disc
...................
51570c 9853 “ “ “ Regulating
'rhumb Nut..................................................
32572 8909 Tension (upper thread) Releasing Disc...
51988 8909 “ “ “ “ Pin....
51071 8922 “ “ “ “ Shaft 51017 8909 “ “ “ “ ' “
Crank with 621c
.........................................
51018 8909 Tension (ui)per thread) Releasing Shaft
Crank Link..................................................
NO. l'I..ATE NAME
()21c 8909 Tension (upi)er thread) Releasing Shaft
()82()1
------
Crank Set Screw
'Pension (upi)cr thread) Releasing Shaft
.........................................
Spring..........................................................
31t)K 8909 'Pension (ui)])er thread) Releasing Shaft
Stop Screw..................................................
1547.1 8909 Tension (upiier thread) Releasing Shaft
Stop Screw Nut...........................................
50326c 9853 'Pension (upper thread) Screw Stud
....................
59539 “ “ “ “ “ 50326c
with 51570c
59535 9858 'Pension (upper thread) Spring
................................................
..................
59537 >1858 “ “ “ “ Bushing
(large)..........................................................
59538 9858 'Pension (upper thread) Spring Bushing
(small).........................................................
57076 9858 'Pension (upper thread) 'Phread Guide. . . 53225 9858 'Phreai.1 (under) Eyelet (back)
190i) 8908 “ “ “ “ Screw
...................
.........
.54072 98.58 “ “ “ (front)..................
64351 8909 “ “ Nipper Cam with 465c. .
46.5c 8909 “ “ “ “ Set Screw.. 38210 8909 “ “ “ Spring (lower). . . 38211 8909 *' “ “ “ (upper) 46247 8909
Stop.............................................................
176i) 8958 Thread (under) Nipper Spring Screw. . . .
68128 9858 “ “ 'Pake-up with two 465c..
465c 8909 “ “ “ Set Screw
.............
54435 9858 “ “ “ Staple with 590o
and 38481....................................................
54049 9855 Thread (under) Take-up Staple Bracket
with 460c.....................................................
965n 8910 'Thread (under) Take-up Staple Bracket
Screw
..........................................................
46041 8909 'Thread (under) Take-up Staple Spring
190d 8908 “ “ “ “ “
Screw
..........................................................
38481 8910 Thread (under) Take-up Staple Thread
Guard
..........................................................
590d 8958 'Thread (under) Take-up Staple 'Thread
Guard Screw
...............................................
38482 8910 Thread (under) Take-up Stripper.......................
207d 8910 “ “ “ “ Screw
64355 8910 “ “ “ Thread Guard
(brass)
.........................................................
30
PARTS FOR MACHINE No. 147-38
31
NO. PLATE
G435G 8910
Thread (under) Take-up Thread Guard
Steady Pin...................................................
460c 8910
Thread (under) Take-up Thread Guard
Steady Pin Set Screw
G8129 98G0
1149e 9853
G8130 98G0 G8131 98G0
Thread (upper) Nipper Body
“ “ “ “ Set Screw.. “ “ “ Disc (inside)
U U U U U
Wasticr (tibre) G8132 98G0 IGOSii 9853
Thread (u])per) Nipper Disc (outside)
u u u u u
Nut..............................................................
5945G 9860
Thread (upper) Nipper Disc (outside)
Nut Washer.................................................
68133 9860
68131 9860 68135 9860 68136 —
Thread (uppiu-) Nipper Roller
“ “ “ “ Hinge Pin. “ “ “ Stud “ “ “ “ 68135 with
68133 and 68134
13218 9860
68137 —
Thread (upper) Ni|)per Stud Spring Thread (upper) Nipper complete, Nos.
1698n, 13218, 59456, 68129 to 68132 and 68136
68138 9860
207d 8910
54075 9860
211f 8958
68198 9852
Thread (upper) Nipper Thread Guide
U (( (( a
Screw
..........................................................
Thread (u))|)er) Take-up.................................
“ “ “ Set Screw
Throat Plate, for /5 in. to j!« in. gauges
for 68194.....................................................
742f 8910
Throat Plate Screw
ACCESSORIES
PLATH NAME
NO. 120344 120345
120341
8941 Oiler (copper plated) with 120345
8941
8911 Screw Driver (large).......................................
26026
8941 “ “ (.small)..................................................
26485
“ Spout, 5 in. long
38487 8941 Threading Wire
8941 Tweezers (curved)..........................................
4822 89t)8 8911
19221
8941
8941
Wrench for 1547
“ “ 1520 and 1620.....................................
“ “ 1516.....................................................
N.AMB
.................................
........................
............................................
.......................
......................
........................................
...............
...................................................
..................
.........................................
.................
.......................................
..............................................
............................................
ATTACHMENT
FOR FRINGING AND TAPING EDGE OF RUGS
FOR 147-38 MACHINE
NO. PLATE NAME
120744 9866 Fringe Guide with Nap Guide on Bracket
1113w 9853 “ “ Screw
...........................................
120745 9866 Leveling Plate.....................................................
120746
------
Rug Guide
..........................................................
1443W 9853 “ “ Screw...............................................
120747 9866 Ta])e Guide on Shank
........................................
96u 9853 “ “ Hinge Screw...............................
36006 9862 “ “ “ “ Friction Washer
120748 9866 Attachment complete, for fringing and
taping edges of rugs in one operation.
Nos. 96u, 36006, 120744 to 120747 and
four 1143w..................................................
1413w 9853 Attachment Screw...............................................
68194 9852 Feed Dog, 14 teeth (10 teeth to the inch) 68t)58 9864 “ Roll (lower) in. wide, with two
50333(1.......................................................
50333c 9853 h'eed Roll (lower) Set Screw...............................
68221 9854 “ “ (upp(ir) (p in. wide, with two
50333(J
.......................................................
50333c 9853 Feed Roll (uiiiier) Set Screw...............................
120749 Presser Foot Compensating Plate
1419f 8922 “ “ “ “ Screw..
...............
24701 9857 “ “ “ “ Spring.
18055 9857 “ “ Hinge Pin.....................................
120750 120751
------------
-------------
“ “ Plate........................................
“ “ Shank......................................
120752 9857 Presser Foot (compensating, hinged) corn-
])lete for 120748, Nos. 18055, 120749 to
120751 and two each 1449f and 24701
68198 9852 Throat Plate, for A in. to in. gauges,
for 68194
........................................................
HEMMER
FOR HEMMING AND INSERTING EUSTIC IN RAYON BLOOMERS
FOR 147-29 MACHINE
NO. PLATE NAjUE
68209 9865 Cloth Plate 68145 9850 “ “ Extension
101 If 8904 “ “ “ Screw
.........................................................
.......................................
...............................
32
NO. 1T,.\TE NAME
51309 90011 Cloth Plate Oil Tube with 19092 '19092 S908 “ “ “ “ Packing (felt) 08107 9808 “ “ Slide (left)
HIÍMMER
.......................
...............
.....................................
38119 8i)01 “ “ “ “ Spring........................
725.1 8904
08108 ---------
68191
--------
38419 8901
725.1 8904
08192
---------
08210 ---------
“ “ “ “ “ Screw
Cloth Plate Slide (left) complete, Nos.
38419, 08107 and two 725j
Cloth Plate Slide (right)..................................
Spring
“ “ “ “ “ Screw. . .
Cloth Plate Sli(hi (right) com|)lele, No.s.
38119, 08191 and two 725.1
Cloth Plat('. coni|)let(', for ■/■2 in. to )g in.
.............
.........................
.................
......................
gauges, for 08105 iiiid 08201, Nos.
.51309, 08108, 08192 and 08209...............
mill.' 8901 5I1I73F 89IM 08200 9803
68095
---------
51457 9801 50333(,’ 9853 54481 9861
Cloth Plate Screw (left)
“ “ “ (right.)
..................................
................................
Feed Dog, 25 ti-idh (20 t(!elh to the inch)
fur 08201
....................................................
Feed D(jg, 25 teeth (20 teeth to the inch)
for 08105
....................................................
Feeil Koll (lower! with two 50333c...............
“ “ “ Set Screw
.............................
“ “ (upper) 1 in. wide, with two
50333c........................................................
50333c
120020
120027
54509
120028
229i)
120029
51097.1 3140
120030
120031
¡0248
1500c
910c
44209
Feed Koll (upiier) Set Screw
9853
lleinnier Bracket with 10218..........................
9804
“ I'ilastic Guide
9800
“ “ “ Position Pin “ “ “ Sjiringwith 51509
9853 9801 9853 980t)
“ “ “ “ S<;rew
“ Folder....................................................
“ “ Thunil) SerevV “ “ “ “ Washer...
“ Tension Fllastie Guide..........................
Plate
9800 9853
9853
“ “ “ Position Pin...............
“ “ llegulating Thuinl) Nut
“ “ Screw Stud
“ “ “ “ 9IO0 with
.........................
...........................
..........
...........
..............
................................
.......................
1560c..........................................................
13710 9800 I lennner Tension Siiring
.....................................
120032 9801 1 leinrner with Elastic I’ension, com[)lete,
for h(!inining anil inserting elastic in Kayon bloomers. Nos. 13710, 44209,
120020 to 120031 and two each 229n,
3146 and 51097J
........................................
IIE.MMEH
NO. PLATE NAME
08096 - - - Presser Foot Chaining-off Plate (hdt) with
08097 and 08099
........................................
08097 9857 Presser Foot Chaining-olT Plate (left)
Guide Pin (long)
.........................................
68098 9857 Pre.sser Foot tdiaining-olT Plato (left)
Guide Pin (long) Collar with 853c
.............
853c 9857 Presser Foot Chaining-off Plate (left)
Guide I’in (long) Collar Set Screw
............
68099 9857 Presser Foot Chaining-off Plate (left)
Guide Pin (short)
........................................
68100 9857 Presser Foot Chaining-off Plate (left)
Spring..........................................................
08101
-----
Presser Foot Chaining-off Plate (right)
with 08097 and 68099
................................
68097 9857 Presser loot Chaining-off Plate (right)
Guide Pin (long)
.........................................
68098 9857 Pre.sser Foot Chaining-off Plate (right)
Guide Pin (long) Collar with 853c
.............
853c 9857 Pre.sser Foot Chaining-oll Plate (right)
(iiiide Pin (long) Collar Set Screw
.............
08099 9857 Presser h'oot Chaining-oll Plato (right)
Guide Pin (short)
........................................
6811)0 98,57 Presser Foot Chaining-off Plate (right) Kpriiig
.........................................................
20276 8911 Prissser Foot Hinge Pin......................................
08102 08103 68100 9857 “ “ Silling
------------
------------
“ “ Plate “ “ Shank
..........................................
........................................
.......................................
08104 9857 Presser F'oot (spring hinged) with right
and left Chaining-off Guide Plates com plete, for ,-6, 32 s'8
for 120632, Nos. 26270, 68096, 68101 to
68103, two 68098 and three 68100
............
68201 9863 'I'liroat Plate, for W in. to ¡K i»- gioiges,
08105
for 68200
------
Throat Plate, for in., 35 in. and •'} ¿ in,
gauges, for 68095
....................................................
.......................................
LAP SEAM FELLERS
NO. I'l.ATE
120524 9806
120709 9806
Lap Seam Feller on Shank, for general
work, for light and medium weight ma
terial............................................................
Lap Seam Feller (adjustable, right hand)
on Shank, for general work, for medium­heavy and heavy weight material
NAME
...............
33
Loading...
+ 37 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use