SINGER 147-28 User Manual

Form 19476 ( 840 ) Printed in U. S. A.

LIST

PARTS

MACHINE No. 147-28

THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR OILING

Before starting the machine, fill all oil reservoirs

and apply oil to the connecting rod and all parts which are

In movable contact and all oil holes. When the machine Is In continuous use, It should be thoroughly oiled at least

twice each day.

Use only Singer "OIL FOR HIGH SFEED SEWING tUCHINES

(Cloth and Leather)“ for general use, or 'STAINLESS OIL FOR

HIGH SPEED SEWING MACHINES" where a stainless oil la de

sired.

INDEX

Page

Accessories............................................................................................................. 16

Belt Guard................................................................................................................... 16

Bench Stand No. 79611.............................................................................................. 16

Edge Guides................................................................................................................ 17

Foot Lifter Parts.......................................................................................................... 18

Knee Lifter Parts......................................................................................................... 16

Machine Base.............................................................................................................. 19

Machine Base Oil Drain Jar........................................................................................ 19

Machine No. 147-28.;................................................................................................... 5

Numerical List of Parts............................................................................................... 21

Tape Holder................................................................................................................. 20

by Th« Singtr Manufacturing Co.

All Rights Rtfcrvtd (or all Countrias

Thread-unwinder......................................................................................................... 20

INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the part NUMBER In the

FIRST column.

The number stamped on a Sewing Machine Part la in every case

the number of the single part only.

Every combination of parts sent out as such has Its specific number, which, although not stamped on the parts, must be used when ordering the combination.

Each number always indicates the 3A№ PART in whatever list

It appeairs, or for whatever machine.

The letters after some of the numbers Indicate the style of

finish only, as follows:

A'Hai-dened, Polished, Nickel Plated and Buffed A.A-Buffed and Chromium Plated A.B-Hardened, Polished, Buffed and Chromium Plated A.C-Brown Baking Enamel Finish A.D-Qray Baking Enamel Finish A.E-Hardened, Bright Rumbled and Nickel Plated A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and

Chromium Plated B-Pollshed, Nickel Plated and Buffed C-Hardened Only

C .R-Hai-dened and Merllzed

D-Pollshed Only E-Soft, Not Polished F'-Hardened and Polished

F.J-Hardened, Polished and Nickel Plated

0-Brlght Rumbled and Nickel Plated H-Blued J-Nlckel Plated Only K-Hardened and Nickel Plated L-Brass Plated M-Qxldlzed N-Japanned, Dull P-Japanned, Bright

P.P-Wrlnkle Finish

B-Merllzed S'Cadmlum Plated T-Copper Plated

T.A-Hardened, Polished, Copper and Nickel Plated and Buffed T.B-Copper and Nickel Plated and Polished T.J-Copper and Nickel Plated Only T.K-Hardened. Copper and Nickel Plated T.L-Copper and Brass Plated T.M-Copper Plated and Oxidized

U-Zinc Plated V-3Ilver Plated W-Pollshed and Nickel Plated X-Black Oxide, for Iron and Steel

X.G-Hardened and Black Oxide, for Iron or Steel

Y-Dlack Nickel Plated Only Z-Chromlum Plated

Z.A-Hai-dened,Polished,Nickel Plated,Buffed and Chromium Plated Z.B-Pollshed, Nickel Plated, Buffed and Chromium Plated Z.C-Hardened and Chromium Plated Z.D-Pt'llshed and Chromium Plated Z.O-Brlght Rumbled, Nickel Plated, Bright Rumbled and Chromium Plated Z.J-Nlckel and Chromiuni Plated Z.T-Copper and ClLTOmlum Plated

These letters MUST BE USED when they appear In the list; and

AFTER the number as In the list.

In this series:

The figures in the second column refer only to the plates,

lllustiatlng the parts, and are NOT TO BE USED In ordering.

Parts marked with an asterisk (*) are furnished only when

repairs are made at factory..

When ordering parts which differ as to Gauge (the distance between seams) the Gauge, as well as the Nu..iber must be given on order.

1 to 1500, 50001 to 51500 and 14a)01 to 142000 are Screw Numbers 1501 to 1800 and 51501 to 51800 are Nut Numbers 18tH to 2000 and 51001 to 52000 are Roller Numbers 2001 to 50000 and 52001 to 140000 and 142001 to 190000 are Sewing Machine Parts, 190001 and upward

are numbers of Electrical Parts.

LIST OF PARTS COMPLETE

FOR

MACHINE No. 147-28

For Covering Seams, Necking and Ornamenting Underwear, also for Sweater Work. Two needles, one looper. Gauges Yg In., 3/16 in. and in. Gathering Feed. Speed up to 3200.

No. Plate

•131129 Arm

T2366 20641

56006

56003

52045 11119

20641

20641 Arm

20641 20641

68118 20641

68119

64386 20641

446C 20641

64388

20641

423C 20641

Arm

upper and lower (solid) with 948J,

15404 and two 15405..................................................

Oil Pad (braided cotton) for oiling

Arm Rock Shaft Front Bearing Oil Pad (braided cotton) for oiling Arm Rock Shaft Intermediate Bearing. Oil Tube with 52045, for oiling

Needle Bar Connecting Link.......................................

Oil Tube Packing (felt)

“ “ with 52045, for oiling Thread

(upper) Nipper

Rock Shaft...................................................................

* “ 68118 with 54004 and 64255

* * Bushing (back)

* " ' " Set Screw..

“ * " (Intermediate)....

* • “ 'Set

Screw

...........................................................................

Name

...................................

...............................................

............................................................

...................................................

PARTS FOR MACHINE No. IA7-28

PARTS FOR MACHINE No. 147-28

No.

52045

54004

453C

131072

50083C

64255

2117 20641

453C

54105 52045

4S3C

54387

54433

948J 54080 40326

76IE

54081

52045

76 IE

54007

54089

64508

64805

422C

50084C

54460

125 8C 54009 54090

Plate 20641

20641 20641 20669

20669 20641

20641

20641 20641

20641

20669

20669 20669 20669

Name

Arm Rock Shaft Bushing Oil Pad (braided

cotton)

........................................................................

Arm Rock Shaft Collar with two 453C...............................

' * " * Set Screw

.................................

" " * Crank, back (ball bearing,

solid) with two 50083C

............................................

Arm Rock Shaft Crank (back) Set Screw...

" " * " (front) with 453C.. " « . » « Pin

....................

... . . “Set

Screw..........................................................................

Arm Rock Shaft Flanged Bushing (front)..

... « . "on

Pad (braided cotton)

..................................................

Arm Rock Shaft Flanged Bushing (front)

Set Screw....................................................................

Arm Rotary Shaft................................................................

" " “ 54387 With 54113, 54401,

54450, 64351, 64355 and 131346

Arm Rotary Shaft Bracket Screw

.............................

.......................................

" “ " Bushing (front)........................

» . . « . on Pad

(braided cotton).........................................................

Arm Rotary Shaft Bushing (front) Set

Screw..........................................................................

Arm Rotary Shaft Bushing, Intenriedlate

(left)...........................................................................