SINGER 147-25 User Manual

Form 19395 ( 240 )

Printed In U. S. A.

LIST

PARTS

MACHINES

Nos. 147-25 and 147-39

THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR OILIN6

INDEX

Before starting the machine, fill all oil reservoirs

and apply oil to the connecting rod and all parts which are

In movable contact and all oil holes. When the machine Is In continuous use, It should be thoroughly oiled at least twice each day.

Use only Singer "OIL FOR HIGH SPEED SEWING MACHINES

(Cloth and Leather)" for general use, or "STAINLESS OIL FOR HIGH SPBXD SEWING MACHINES" where a stainless oil Is de sired.

by Th« Singer Manufacturing Co.

Belt Guard..................................................................................................................

Bench Stand No. 79611.............................................................................................

Fittings for Straight or Tunnel Belt Loops................................................................

Folders........................................................................................................................

Foot Lifter Parts

Knee Lifter Parts......................................................■...............................................

Machine Base.............................................................................................................

Machine Base Oil Drain Jar.......................................................................................

Machine No. 147-25..................................................................................................

Machine No. 147-39..................................................................................................

Numerical List of Parts..............................................................................................

Stiletto.........................................................................................................................

Thread Unwinder.......................................................................................................

........................................................................................................

.................

Page

INSTRUCTIONS FOR ORDERING

ID ordering from this list, use ONLÎ the part NUMBER In the

FIRST column.

The number stamped on a Sewing Machine Part Is In every сазе

the number of the single pert only.

Every combination of parte sent out as such has Its specific number, which, although not stamped on the parts, must be used when ordering the combination.

Each number always indicates the SA№ PART In whatever list it appears, or for whatever machine.

The lettei-8 after some of the numbers Indicate the style of finish only, as follows:

A-Haixlened, Polished, Nickel Plated and Buffed A.A-Buffed and Chromium Plated A.B-Kardened, Polished, Buffed and Chromium Plated A.C-Brown Baking Enamel Finish A.D-Qray Baking Enamel Finish A.E-Hardened, Bright Rumbled and Nickel Plated A.F-Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled and

Chromltjn Plated B-Pollshed, Nickel Plated and Buffed C-HaiTlened only

C.R-HardeneJ and Merllzed

D-Pollshed Only E-Soft, Not Polished F-Hanlened and Polished

F.J-Hardened, Polished and Nickel Plated

Q-Brlght Rumbled and Nickel Plated H-Blued J-Nlckel Plated Only K-Hardened and Nickel Plated L-Brass Plated M-Qxldlzed N-Japanned, Dull P-Japannod, Bright

P.P-WrInkle Finish

R-Merllzed S-Cadmium Plated T-Copper Plated

T.A-Hardoned, Polished, Copper and Nickel Plated and Buffed

T.B-Copper and Nickel Plated and Polished T.J-Copper and Nickel Plated Only T.K-Hardened, Copper and Nickel Plated T.L-Copper and Brass Plated T.M-Copper Plated and Oxidized

U-Zlnc Plated V-Sllver Plated W-Pollshed and Nickel Plated X-Black Oxide, for Iron and Steel

X.C-Hardened and Black Oxide, for Iron or Steel

Y-Black Nickel Plated Only

Z-Chromlum Plated Z.A-Hardened,Polished,Nickel Plated,Buffed and Chromium Plated Z.B-Pollshed, Nickel Plated, Buffed and Chromium Plated Z.C-Hardened and Chromium Plated Z.D-Pollshed and Chromium Plated Z.Q-Brlght Rimbled, Nickel Plated, Bright Rumbled and Chromium Plated Z.J-Nlckel and Chi'omlum Plated Z.T-Copper and Chromium Plated

These letters MUST BE USED when they appear in the list; and

AFTER che number as in the list.

In this scries:

The flgiu'ôs In the second column refer only to the plates.

Illustrating the parts, and are NOT TO BE USED In ordering.

Parts marked with an asterisk are furnished only when

repairs are inade at factory..

When oi’derlng parts which differ as to Qauge (the distance between seams} the Gauge, as well as the Number must bo given on order.

1 to 1500, 50001 to 51500 and 140001 to 142000 are Screw Numbers 1501 to 1800 and 51501 to 51800 are Nut Numbers 1801 to 2000 and 51801 to 52000 are Roller Numbers 2001 to 50000 and 52001 to 140000 and 142001 to 100000 are Sewing Machine Parts, 190001 and upward are numbers of Electrical Parts.

LIST OF PARTS COMPLETE

FOR

MACHINE No. 147-25

For Covering Seams, Necking and Ornamenting Knit Under

wear. Two needles, one looper. Gauges Vs inch, Inch and

V4 inch. Speed up to 3200 R. P. M. according to the material

being stitched.

No.

Plate

*131128

42366

20641

56006 20641 Arm

56003 20641

11119 20641

52045

68118

20641 Arm 20641

68119

4460

423C

20641 20641 20641 20641

64386

64388

, upper and lower (solid) with 948J,

Ann,

15404 and two 15405...............................................................

Oil Pad (braided cotton) for oiling

Ann

Arm Rock Shaft Front Bearing Oil Pad (braided cotton) for oiling Arm Rock Shaft Intermediate Bearing.

Arm Oil Tube with 52045, for oiling

Needle Bar Connecting Link....................................................

Arm Oil Tube with 52045, for oiling

Thread (upper) Nipper..............................................................

Oil Tube Packing (wick)..........................................................

Rock Shaft.................................................................................

" " 68118 with 54004 and 64255

" " Bushing (back)

" “ " " Set Screw..

" " (intermediate)....

« " " " Set

Screw.........................................................................................

Name

................................................

..............................................................

PARTS FOR MACHINE No. 147-25

No. 52045 54004

Plate 20641 Arm 20641

453C 20641

131072

20642

50083C 20642

64255

20641

2117 20641

453C 20641 54105 20641 52045

20641

453C 20641

54254 20642 54347

—

948J 20642

54080

20642

40326 20642

761E 20642 Ann

54081 20642

52045

20642

761E 20642

54007

20642

54089

64508 20642

64805 20642

20642

422C

50084C

20642

54450 20642

1258C

20642 54009 20642 54090 ”

58039 20642

Name

Rock Shaft Bushing Oil Pad (wick)...

.It

" " Collar with two 453C

'' " " Set Screw

" *' Crank, back (ball bearing,

........................................

solid) with two 50083C...........................................................

Arm

Rock Shaft Crank,back (ball bearing,

solid) Set Screw.......................................................................

Arm

Rock Shaft Crank (front) with 453C..

0 tt II II

" ' " ' Set Screw..

“ " Flanged Bushing (front)..

« . I. « "Oil

Pad (wick)................................................................................

Arm

Set Screw

.................................................................................

Arm

Rotary Shaft.............................................................................

" " 54254 with 54113,54450,

64351, 64355 and 131346.......................................................

Arm

«1

“ " Bushing (front)

M a » a

(braided cotton).................................................

Screw

Ann

Arm

.......................................................................................

Rotary Shaft Bushing (Intermediate,

left)

..........................................................................................

Rotary Shaft Bushing (Intermediate, left) Oil Pad, long (braided cotton)

Arm

Rotary Shaft Bushing (Intermediate,

left) Set Screw.........................................................................

Arm

Rotary Shaft Bushing (Intermediate,

right)........................................................................................

Arm

Rotary Shaft Bushing (Intermediate, right) 54007 with 64508 and 64805...

Arm

Rotary Shaft Bushing (Intermediate, right) Oil Pad, long (braided

cotton)......................................................................................

Arm

Rotary Shaft Bushing (Intermediate, right) Oil Pad, short (braided

cotton)......................................................................................

Arm

Rotary Shaft Bushing (intermediate)

Set Screw (long)......................................................................

Arm

Rotary Shaft Bushing (Intermediate)

Set Screw (short).....................................................................

Arm

a a

' Set Screw.

Flanged Bushing..

with 58039 and 64805-

Arm

long (braided cotton).

Oil Pad

54009

....................

159F

144D

725J

Plate 20642

20642 20642

20642 20644

20644 20644 20644 20644 20642

20642 20643 20643 20643 20643 20643

20643 20643 20649 20649 20651 20650 20649

20649

20651

No.

64805

49013

54256 46111 51224W

54010

51224W

64259

51203C

54257

lOllF

50473F 61012 54013

38419

54014 54055 68166

131057

54015

54056

68167

131058 20650

38419 20649

725J 20649

54350

131742

Name

Arm Rotary Shaft Flanged Bushing Oil Pad,

short (braided cotton)...............................................................

Arm Rotary Shaft Flanged Bushing Screw..

" " • Front Bearing Oil Pad

(braided cotton)........................................................................

Arm Rotary Shaft Screw.....................................................................

" Side Cover (back)..........................................................................

« • • • Position Pin

■ • ■ * Thumb Screw “ " (front)

.................................................................

" • * " Thumb Screw

..............................

.................................

...........................

Balance Wheel, 2 In. dlam. pulley, with

two 51283C..............................................................................

Balance Wheel Set Screw...................................................................

Cloth Plate...........................................................................................

" " Screw (left)

• • • (right)

....................................................

..................................................

“ " Slide (left).....................................................

Cloth Plate Slide (left) complete. Nos.

38419, 54012 and two 725J......................................................

Cloth Plate Slide (left) Spring.............................................................

• " " " * Screw...

" " • (right) for 54015.......................

• • " « <t 54056

.....................

" " " urn 68167...............................

• * » * « 131058.....................

Cloth Plate Slide (right) complete for

Throat Plate 46162, for 1/8 In.,9/64

In. and 3/16 in. gauges, for 54350,

Nos. 38419 , 54014 and two 725J

............................................

Cloth Plate Slide (right) complete for

Throat Plate 46162, for 1/4 In.gauge, for 131742, Nos. 38419,54055 and two

725J...........................................................................................

Cloth Plate Slide (right) complete for

Throat Plates 54426 and 131248, for

1/8 In., 3/16 In. and 1/4 in.gauges, for 54258, Nos. 38419,68166 and two

725J...........................................................................................

Cloth Plate Slide (right) complete for

Throat Plate 131588, for 1/4 in. gauge, for 131743, Nos. 38419,131057 and two 725J

............................................................................

Cloth Plate Slide (right) Spring..........................................................

■ " • ■ ■ Screw..

Cloth Plate complete for Throat Plate

46162, for 1/8 In., 9/64 In. and 3/16 In. gauges. Nos. 1460H, 54013, 54015 , 54257 and 54261

........................................................

Cloth Plate complete for Throat Plate

46162, for 1/4 In. gauge, NOS.1460H,

54013,54056,54257 and 54261

...............................................

PARTS FOR MACHINE No. 147-25

No.

54258

131743

54104

1235D

54259

131346

89 6E

1057E 68350 54218

6575 64269 2064446111 20644

51224W

54019 20645

54020 20642

57225

453C

54111

54113

896F

1057E

54023 20645 21506 20645

457C 20645

131311 20649

131585

54422

157J 50429C 20645 51061C

7071

217J

Plate

20643

20643 20642

20642 20642 20642

20642

20644

2064.5 20645 2-0642

20642 20642

20650

20651

20649

20642 20642 20642

Name

Cloth Plate complete for Throat Plates

54426 and 131248, for 1/8 In,, 3/16

in. and 1/4 In. gauges. Nos. 1460H,

54013, 54257, 54261 and 68167.............................................

Cloth Plate complete for Throat Plate

131588, for 1/4 In. gauge,Nos.1460H,

54013, 54257, 54261 and 131058...........................................

Cloth Plate Thread Guard...................................................................

'' " " *' Screw

Crank Connecting Rod with 6575, 54218,

68350 and two each 896E and 1057E...

Crank Connecting Rod 54259 with 131072..

'' B « (iQwer) Screw.. " “ <1 « (upper) Screw..

" " " Oil Cup..................................

" (IBB pg^fj (bi'aided

cotton)......................................................................................

Crank Connecting Rod Oil Pad Stop Pin...

Face Plate...........................................................................................

" " Pin

" " Thumb Screw...............................................................

Feed Bar with 50429C and two 453C

" '' Connection " " Hinge Pin

" *' “ " Set Screw.............................................

" Connecting Rod with 1057E and two

Feed Connecting Rod 54111 with 54025....

" B B (Hgp SQi-ew " " " Clamping Screw

“ " " Hinge Pin " " B B B Collar with

Feed Connecting Rod Hinge Pin Collar Set

Feed Dog,21 teeth (16 teeth to the Inch)

Feed Dog,17 teeth (12 teeth to the Inch)

Feed Dog, 18 teeth(16 teeth to the Inch)

Feed Dog Screw.................................................................................

“ " Stop Screw......................................................................

" Eccentric Body Set Screw.........................................................

" *’ Clamping Washer * " B B Screw..,.

................................................................................

.......................................................................

.........................................................................

896E........................................................................................

457C........................................................................................

Screw.......................................................................................

for 1/8 in. to 1/4 In. gauges, for

46162.......................................................................................

for 1/4 in. gauge, for 131588, for medium heavy and heavy weight ma

terial........................................................................................

for 1/8 in., 3/16 In. and 1/4 In. gauges, for 54426

...................................................................

....................................

...............................................

..............................

...............................

...........................................

..............................................

No. Plate

54025 20642

453C

896C

190J

453C

175E

20642 20642 20642 20645 20645 20645 20645

20645 20643 20643 20644 20644 20649 20649 20645 20645 20645 20645

20645 20645 20645

20645

20643 20643

20645

20645 20645 20645 20645

20646 20645 20645 20645

54260

1259C

1103C 54026 57234 57235

4530

54261

1460H 25618

51224W 54377 54378 54262 54263

125 8C 54264 54349 42074

10360

42075

68288

42077

171E 42078 42079

453C

54265

171D 54266 54343 54344

54268 54269

446C

Feed Eccentric (adjustable) complete,

NOS.1103C and two each 217J,7071 and

51061C.....................................................................................

Feed Lifting Eccentric with two 1259C...

" ^ ' Set Screw " Regulating Screw

" Rocking Frame with two 4530...................................................

" * " Hinge Pin

" B B B B Bushing....

B « B B B B 3gt

Screw........................................................................................

Feed Rocking Frame Hinge Pin Set Screw,. Folder Holder Seat Cover

’ B B B Screw

Guide...................................................................................................

" Thumb Screw..............................................................................

Looper with 590D and 38393.............................................................

" 54377 with 229D and 46204............................................

" Avoiding Eccentric with two 1258C " “ " Connection

" " “ Set Screw.......................

" Bell Crank with 10B6C..............................................................

" ' ' 54264 with 42078

" " ' Ball Stud " B <1 » B ggp Screw...

• " B Connection with four

896C.........................................................................................

Looper Bell Crank Connection Cap (lower)

Screw........................................................................................

Looper Bell Crank Connection Cap (upper)

Screw........................................................................................

Looper Bell Crank Connection Cover................................................

" " " " ^ Screw " " " " Guide

B B B B B

" " " Hinge Pin.............................................

" « » B B Bushing " . B . B "Set

Screw........................................................................................

Looper Bell Crank Hinge Pin Set Screw...

“ Carrier with two 171D " “ Adjusting Screw ' " Connection with two 175E. " " " 54266 with 54263 " " " 54343 with 54265

and 54268.................................................................................

Looper Carrier Connection Cap Screw...............................................

“ " " Shaft...............................

• ’ « B Bushing

• n HUM

Set Screw..................................................................................

Name

............................................

.......................................................................

..........................................

...................................................................

...............................................

__________

..............................

.....................................................

....................

........................

......................................................

.........................................

No.

49013 20645

54270 20645 54334

679C

1520J 20645

50016C 20645

151SJ 20645

187E 20645

187E 54273 20645 54348

125 9C

1036C

54035

704J 20645 46204 46105

229D

1120C

38393

590D

64319 20646

54274

38456

1133E

64320

1133E 54326 54329

54327

1520E

54328

187E

46152

131269

54038

176J 217F

1498F

PARTS FOR MACHINE No. IA7-25

Plate

Looper Carrier Connection Shaft Oil Pad

(braided cotton)......................................................................

Looper Carrier Pitman with four 187E----------------------------------

" " *' 54270 with 679C and

50016C....................................................................................

20645

Looper Carrier Pitman Ball Screw Stud

(left)........................................................................................

Looper Carrier Pitman Ball Screw Stud

(left) Nut.................................................................................

Looper Carrier Pitman Ball Screw Stud

(right)......................................................................................

Looper Carrier Pitman Ball Screw Stud

(right) Nut...............................................................................

Looper Carrier Pitman Cap (left) Screw..

20645

" " II « (right) Screw. " Driving Crank with 1036C and 1259C

—

" *' " 54273 with 42074 and

42075 20645 20645 20645

Looper Driving Crank Position Screw

" " '' Set Screw " Holder with 1120C

" " Screw

20649 20649

20649 20645 20649 20649

" Needle Guard with 46105.......................................................

" •' " Pin................................................

" " *' Screw

" Set Screw................................................................................

" Thread Guard..........................................................................

" » « Screw...................................................

Needle Bar (hollow)

20646

Needle Bar complete, Nos. 46152 and

64319.......................................................................................

20646 20646 20646 20646 20646

Needle Bar Bushing (lower)

" " " " Set Screw....

•' " *' (upper).........................................

" " " “ Set Screw....

" " Connecting Link........................................................

" " " " 54326 with

54327 and 54328.....................................................................

20646 20646 20646

Needle Bar Connecting Link Hinge Stud...

" “ " . II 11 " " " Stud with 211F and

two 187E.................................................................................

20646

Needle Bar Connecting Stud Clamping

Screw.......................................................................................

20646

20649 20649 20649 20649 20646

Needle Clamp with two 1498F..........................................................

" Guard for 1/8 In. to 1/4 In. gauges " " Holder " " " Screw

“ " Screw..........................................................................

* Set Screw................................................................................

Name

......................................................,...............................

..............................................

..........................................

.................................................................

......................................................................

...........................................

..........................................................................

..............................................................

........................................................................

...........................................................

PARTS FOR MACHINE No. 147-25

No.

54275 20643

49092

54108 20644 54109 49092 54110

64330 25303 64331

1133E

38456

1133E 20646

54039

11173

1963

57257 57258 20646

447C 20646 1872 125 OC

61047

68208 20644 61075 20644

460C

68184

802D

38467 38468 26276 54353 36030 54354

54723 20650 Presser Foot Hinge Block............................................................................

26276 20650 " . . « Hinge Pin...!

54423 20650 " " Plate ......................................................

54424 20650 " » Shank

1080F 20650 " " ■ Hinge Screw

Plate

Oil Cup with 49092..........................................................................................................................

N 41

.(t H

207D

20643 20643

20644 20644 20644

20646

oil Tube complete, for oiling Crank Con-

Presser 20646 20646 20646 20646

20646

640J

20646

Presser Bar

20646

447C 20646 "

20646

453C

20646

20646 20646 20646

Presser Bar Lifting Lever

tl M

Presser Bar Lifting Lever Extension..

It It

16IJ

20646

20644

20644 20644 20644 2064420649 20649 20649 " 20649

Presser Foot (hinged) complete for 1/8

Name

Oil Pad (felt).............................................................

H It

Screw.............................................................................

" Tube...

Bracket........................................................................

n H

Packing (felt)..............................................................

nectlng Rod (upper bearing) Nos.

49092,

54108 and 54109

Bar with 25303..............................................................

*1 11

It II

u M

and

Ball, size 1/4 In..................................................

Bushing (lower)..................................................

Guide Bracket with 453C,640J

1963

..............................................................................

..................................................

" " Set Screw...

• (upper).....................................................

" " Set Screw...

Guide Bracket Adjusting

Screw..

Presser Bar

Guide Bracket Guide..........................................

“ " " Set Screw

" " Roller and Stud

*' “ Set Screw

Lifter...................................................................

" Hinge Pin

" " " Set Screw..

" Roller and Stud

" Stop Screw

...............................................

................................................

.......................................

..............................................

" Lifting Bracket with 460C and

1872...

...................................................................

" “ Connecting Stud H II If II

Set

Screw..................................................................

Foot Hinge Pin....................................................

" *' " Screw

" * Hinge Screw...

Spring (flat).........................................................

*' Stud..............................................

Plate..........................................................

Shank........................................................

In., 3/16 In. and 1/4 In. gauges.

Nos. 26276, 36030 and 54353............................................

....................................................

!..!

...........................

No.

54425

190J 574W

1539W 64336 46035

190J 54276 54042

175E 20648

54043 24292

1019C 20648

54044

1253C

50150C

2102

54277

54278

50473F

203D 20647

51570C

50326C

59539

131740

59537

59538

54279

54070

376J

2102

51570C

32572

PARTS FOR MACHINE No. 147-25

Plate 20650

20649 20644 20644

20646

20648

20648 20648 20648

20648 20648

20648

20648 20647 20647 20647

20647

20647 20647

20647

20648

20648 20648

20648

Presser Foot (double hinged) complete

for 1/8 In., 3A6 In. and 1/4 In.

gauges, Nos. 26276,54423,54424,54723

and two 1080F..........................................................................

Presser Foot Screw Pressure Regulating Thumb Screw

* , « Lock Nut

Slack Thread Controller......................................................................

« " " Clamp..............................................

• • » « Screw........................

" " Regulator « • " Holder with 175E

and 50150C..............................................................................

Slack Thread Regulator Holder Clamping

Screw........................................................................................

Slack Thread Regulator Holder Shaft

n " " » H Collar

with 1019C...............................................................................

Slack Thread Regulator Holder Shaft

Collar Set Screw.......................................................................

Slack Thread Regulator Holder Shaft

Crank (forked) with 1253C......................................................

Slack Thread Regulator Holder Shaft

Crank Set Screw.......................................................................

Slack Thread Regulator Set Screw

Tension (under thread) Disc...............................................................

» " " Pull-off * " * " Eyelet

(adjustable)..............................................................................

Tension (under thread) Pull-off Eyelet

Screw

Tension (under thread) Pull-off Screw...

Tension (under thread) Screw Stud....................................................

Tension (under thread) Spring............................................................

Tension (under thread) Spring Bushing

Tension (under thread) Thread Qulde

Tension (upper thread) Bracket..........................................................

Tension (upper thread) Releasing Disc...

.......................................................................................

" • " Regulating Thumb

Nut............................................................................................

" • « « . 50326C

with 51570C.............................................................................

" * ■ " Bushing

(large)......................................................................................

(small)......................................................................................

(double)...................................................................................

“ • " " Screw....

* * " Disc * ■ * Regulating Thumb

Nut............................................................................................

Name

.............................................................................

....................................................

.................................................................

................................................

.....................................................

..................................

.......................................

No,

54988

54071 20648

54047

54048

68261

50326C

59539

131741

59537

59538

131696

53225 20647

38284

64351 20642

38210 38211 46247

54280

38478

54049

46041

38481

54281

64355

20648

20648 Tension (upper thread) Releasing Shaft

624C

20648 Tension (upper thread) Releasing Shaft

316F

20648 Tension (upper thread) Releasing Shaft

1547J

20648

1907

20647

465C

20642 20647 20647 20647

176J

20647 20642

465C

20642 20647

20647

965D

20647

1907

20647

590J

20647

207J

20647 20642

PARTS FOR MACHINE No. 147-25

Plate Name

20648 Tension (upper thread) Releasing Pin....

" " ■ " Shaft..

50326C

20648 20648

20648

0 n n ft »

Crank with 6S4C......................................................................

Crank Link

...............................................................................

Crank Set Screw

Spring.......................................................................................

Stop Screw................................................................................

Tension (upper thread) Releasing Shaft

Stop Screw Nut

Tension (upper thread) Screw Stud

with 51570C.............................................................................

Tension (upper thread) Spring............................................................

" " " " Bushing

(large)......................................................................................

Tension (upper thread) Spring Bushing

(small).....................................................................................

Tension (upper thread) Thread Guide................................................

Thread (under) Eyelet (back)..............................................................

” " » B Screw.......................................................................

* • “ (front).................................................................................

" * Nipper Cam with 465C........................................................

* ' B » gg^ Screw.......................................................................

" " Spring (lower)

" " mm (upper)....

' • m m m g^gp

" “ Take-up with two 465C

" m m ggL Screw..................................................................

■ " “ Staple with two

each 590J and 36481...............................................................

Thread (under) Take-up Staple Bracket

with 460C.................................................................................

Thread (under) Take-up Staple Bracket

Screw

Thread (under) Take-up Staple Spring_______________________

mm mm m

Screw

Thread (under) Take-up Staple Thread

Guard........................................................................................

Thread (under) Take-up Staple Thread

Guard Screw.............................................................................

Thread (under) Take-up Stripper........................................................

■ ' * • Screw... " “ " Thread Guard

.......................................................................

........................................................................

....................................................

__________________________________

" <1 « Screw.............................................................

___________________________

.......................................................................................

.....................................................................

PARTS FOR MACHINE No. 147-25

No.

64356

54331

54282 20648 54242

68129 20648

1149C

68130 20648

68131 20648

68132

59456 20648

68133 20648 68134 20648 68135 68136

13218 68137

68138

131334 20648

54095

68164

1449J 20648

131335

46162

131246 20651

54426 20651

131586

54427

llOOJ 20650

Plate 20647

20647

460C

20648

207J 20648

20648

190J 20648

20648

1698R 20648

20648

207J 20648

20648 20648

20646

211F

20649

20650

229D 20651

Name

Thread (under) Take-up Thread Guard

Steady Pin................................................................................

Thread (under) Take-up Thread Guard

Steady Pin Set Screw

Thread (upper) Controller..................................................................

" " " Screw " " " Wire

" " - в Clamp H Й и Й Й

Screw.......................................................................................

Thread (upper) Nipper Body..............................................................

" " It II 3g^ Screw....

“ * “ Disc (Inside) n If It n • Washer

(fibre)......................................................................................

Thread (upper) Nipper Disc (outside)....

" It non

It It If II If «

Washer.....................................................................................

Thread (upper) Nipper Roller

• " " " Hinge Pin.. " • *' Stud " " в " 68135 with

68133 and 68134.....................................................................

Thread (upper) Nipper Stud Spring...................................................

Thread (upper) Nipper complete. Nos.

1698R,13218,59456,68129 to 68132 and

68136.......................................................................................

Thread (upper) Nipper Thread Guide................................................

" • я « « Screw

• " Take-up................................................................

• " ' Plate..............................................

" " я « Spring я я я я я Screw

Thread (upper) Take-up complete. Nos.

1449J, 54095 , 68164 and 131334 Thread (upper) Take-up Set Screw Throat Plate for 1/8 In. to 1/4 In.

gauges, for 54015,54056,54350,131311

and 131742 Throat Plate Body for 54426 and 131248.. Throat Plate complete for 1/8 In., 3/16

In. and 1/4 In. gauges, for 54258, 54422 and 68167, Nos, 54427, 54428, 131246 and two 229D

Throat Plate Body..............................................................................

* " Seam Guide (left) * • ■ " * Screw for

54426.......................................................................................

Throat Plate Seam Guide (left) Screw for

131588....................................................................................

..............................................................

............................

..............................

_______

...................................

............................................................

................................................

.......................................

.........................................

...................................................

.............................................................................

............................................................

...................................................

No. Plate

54428 20651

131587 20650

229D 20651

20650

llOOJ

229D

742F

20650

20651 20651 20651

20649

131588

131247

131348

*15404

15405

Throat Plate Seam Guide (right) for

54426........................................................................................

Throat Plate Seam Guide (right) for

131588......................................................................................

Throat Plate Seam Guide (right) Screw

for 54426..................................................................................

Throat Plate Seam Guide (right) Screw

for 131588................................................................................

Throat Plate complete, for 1/4 In.

gauge, for 131058,131585 and 131743, for medium heavy and heavy weight

material, Nos. 54427, 131586, 131587

and two llOOJ

Throat Plate Fllllng-ln Piece

* " " " Screw

Throat Plate complete for 1/8 In., 3/16

In. and 1/4 In. gauges, for 54258, 54422 and 68167, Nos. 131246, 131247

and two 229D...........................................................................

Throat Plate Screw

Trade Mark..........................................................................................

" • Rivet..............................................................................

..............................................................................

Name

..........................................................................

...............................................................

Genuine Singer Needles should be used

in Singer Machines.

These Needles and their Containers

are marked with the

Company’s Trade Mark “SIMANCO.” 1

Needles in Containers marked

“For Singer Machines”

are not Singer made needles.

........................

MACHINE No. 147-39

For Making Narrow or Tunnel Belt Loops for Trousers. Two

needles, one looper. Gauges inch and inch. Speed up

to 3200 R. P. M. according to the material being stitched.

No.

26276 121135 121192 121136

120719 120463

1460H

18116

8505 121139 121137

121138

121140

PARTS FOR MACHINE No. 147-39 1'^’

Plate Name

20652 Presser Foot Hinge Pin.....................................................................................

20652 ” " Plate........................................................................

20652 " " Shank......................................................................

20652 Presser Foot (hinged) complete for 1/4

20652 Strip Folder on Slide (short).............................................................................

20652 " " Holder with 8505 and 18116. 20652 « « « Screw

20652 " " " spring

20652 ... 0 I. Rivet..............................

20652 Throat Plate Body.............................................................................................

20652 " ■' Belt Loop Guide (left)

233J

20652 .1 Screw

20652 " " " " (right)....

20652 .1 « II « . II Screw 20652 Throat Plate complete for 3/16 In. and

In. gauge,for narrow belt loops,Nos.

26276, 121135 and 121192.....................................................

.............................................

...........................................

1/4 In. gauges, for 120733, 131745

and 131746, Nos.121137 to 121139 and

four 233J..................................................................................

NOTE; THIS MACHINE IS THE SAME AS THE 147-25 MACHINE,

WITH THE FOLLOWING EXCEPTIONS:

No. 131744 131745

38419

131746

120733

26276 121132 121133 121134

725J

Plate 20652

20652

20652 20652

20652

20652 20652 20652 20652

Name Cloth Plate Slide (right) for 131745 Cloth Plate Slide (right) complete for

Throat Plate 121140, for 3/16 In. and 1/4 In. gauges, for 131746, Nos.

38419, 131744 and two 725J..................................................

Cloth Plate Slide (right) Spring

Cloth Plate complete for Throat Plate

121140, for 3/16 In. and 1/4 In. gauges. Nos.1460H,54013,54257,120463

and 131745..............................................................................

Feed Dog, 20 teeth (16 teeth to the

Inch) for 3/16 In. and 1/4 in.gauges,

fcr 121140...............................................................................

Presser Foot Hinge Pin

“ ■ Plate..................................................................

" * Shank................................................................

Presser Foot (hinged) complete for 3/16

In. gauge,for narrow belt loops,Nos.

26276, 121132 and 121133.....................................................

......................................................................

________________________

.........................................................

.1 <1 Screw..

Genuine Singer Needles should be used

in Singer Machines.

These Needles and their Containers

are marked with the

Company’s Trade Mark “SIMANCO.” 1

Needles in Containers marked

“For Singer Machines”

are not Singer made needles.

ACCESSORIES

No. Plate 120344 20656 120345 120440 121108

38487

120341 20656

8908

4822

20656 20656 20656 20656

20656 20656

Oiler (copper plated) with 120345.

" Spout, 4 1/2 In. long

Screw Driver (large)...........................................................

" " (small).....................................................

Threading Wire

Tweezers (curved)..............................................................

Wrench for 1520.................................................................

" " 1547......................................................

..................................................

..................................................................

BELT GUARD

No. Plate Name

68222 20633 Belt Guard with two wood screws

No. 12 F.H

.........................................................

BENCH STAND No. 79611

FOR NO. 147-25 MACHINE

No.

79611

126849

27938

126247

126248

41538

60656

Plate

20656

20656 20656

20656

Bench Stand with 27998, two each 41538,

126849, three wood screws 1 1/4 In.

No. 12, four each 60656, wood screws

1 1/4 In. No. 10, eight wood screws 5/8 In. No, 6 and sixteen wood

screws 5/8 In. No. 7.................................................................

Flap Hinge with four wood screws 3/4 In.

No. 7

........................................................................................

Flap Hook and Eye (brass) with wood

screw 1/2 In. No. 5..................................................................

Flush Bolt...........................................................................................

* • Plate..............................................................................

Flush Bolt with Plate complete. Nos.

126247, 126248 and four brass wood

screws 5/8 In. No. 4 F.H.........................................................

Hinge..................................................................................................

Name

1 In.

FITTINGS FOR STRAIGHT OR

TUNNEL BELT LOOPS

FOR NO. 147-39 MACHINE

No.

120710

1443J 120714 120711 120712

120713 20653

50253D

120715 20653

5944

120716 20653

1443J

120717 20653 " “ Shank........................................................................................

1425J

120718

54055 20653 54056 20653 Cloth Plate Slide (right) complete for

120733 20653 Feed Dog,20 teeth (16 teeth to the Inch)

120720 120736 20653

120721 20653

120722

120723 20653

50424J

120724 20653

Plate 20653 20653 20653 20653 20653

20653

857D

20653

20653 “ " Position Pin..............................................................................

20653 20653

335J

20653 20653

646D

20653

20653 Presser Foot Guide (left) with 120736...

HID 20653

20653

337J

20653

Edge Folder on Bracket.......................................................................

" " Screw........................................................................................

Folder Plate..........................................................................................

" Slide..........................................................................................

" * Guide.....................................................................................

'' * " Lock Spring * “ “ ” " Screw

* • " Screw...................................................................................

Strip Folder on Bracket

" " « Plate with 5944...

" " » . screw....................................................................................

" " Screw........................................................................................

" " “ Hinge Screw..........................................................................

" " Stop Screw

Attachment (convertible) complete, Nos.

646D,1425J,120710,120711,120713 to 120717,two each 335J,857D,120712 and

four each 1443J and 50253D...................................................

Cloth Plate Slide (right).......................................................................

Throat Plate 120734, for 3/16 In.and 1/4 in. gauges, Nos. 38419,54055 and

two 725J...................................................................................

for 3/16 In. and 1/4 In. gauges, for

120734......................................................................................

" 1 n ti oulde Pin for

120720......................................................................................

Presser Foot Guide (left) Lifting Lever.

Hinge Screw.............................................................................

Presser Foot Guide (left) Lifting Lever

Latch.........................................................................................

Presser Foot Oulde (left) Lifting Lever

Latch Spring.............................................................................

Presser Foot Oulde (left) Lifting Lever

Latch Spring Screw..................................................................

Presser Foot Oulde (left) Lifting Screw.

■ • " (right) with 120736..

...............................................................................

Name

........................................................................

_____________________________________

.......................................................................

■ H H m H 0

FITTINGS FOR STRAIGHT OR TUNNEL BELT LOOPS

FOLDERS

No.

120736

1264J

40268

120725

337J 120726 120727

468C 120728 120729

120730

120734

No. 54055 54056

54057 54058

36440 50004D 36441 20654 50004B 36443 20664 36442 36444 20654

120463

1460H

18116

8505

131348

Plate 20653

20653

20653 20653 20653 20653 20653 20653 20653 20653 20653

20653

Plate 20654 20654

20654 20654

20654

20654 20654 20654 20654 20654

Presser Foot Guide (right) Guide Pin for

120724.....................................................................................

Preaser Foot Guide (right) Stop Screw...

" " " Spring...............................................

" « " " Cap.......................................

* " " tt II Screw " “ Hinge Stud

" « " " Collar with 460C

*’ " Plate " " Shank

Presser Foot (hinged) with spring yield

ing guides and device for locking left hand guide complete, for 120718,

Nos. HID, 1264J, 50424J, 120720 to

120729, two 40268 and three 337J

Throat Plate, for 3/16 in. and 1/4 in.

gauges, for 54056, 120718 and 120733

Name

...............................

..................................................

Set Screw

..............................................................

.............................................................

------------------------------

FOLDERS

FOLDER

FOR BUCKLE STRAPS

FOR NO. 147-39 MACHINE

Cloth Plate Slide (right) for 54056.....................................................

Cloth Plate Slide (right) complete for

Throat Plate 36032, for 3/16 in.

gauge, Nos.33419,54055 and two 725J. Cloth Plate Slide (right) for 54058 Cloth Plate Slide (right) complete for

Throat Plate 36032, for 1/4 in.

gauge, Nos. 38419,54057 and two 725J

Folder.................................................................................................

" Adjusting Screw........................................................................

" Block.................................................................................

" Screw.................................................................................

“ Slide " Tongue

Folder on Slide complete. Nos. 36440 to

Folder Holder with 8505 and 18116..................................................

Feed Dog,27 teeth (16 teeth to the inch)

..................................................................................

..............................................................................

36443 and four 50004B...........................................................

" " Screw..............................................................

" " Spring.............................................................

* ' " Rivet

for 3/16 in. and 1/4 in. gauges, for

36032.......................................................................................

Name

....................................................

..................................................

No. Plate Name

26276 20654 Presser Foot Hinge Pin..........................................................................

36445 20654 “ " Plate

36030 20654 " " Shank.....................................................................

36446 20654 Presser Foot (hinged) complete. Nos.

26276 , 36030 and 36445

36032 20654 Throat Plate for 3/16 in. and 1/4 in.

gauges, for 54056, 54058 and 131348.

.......................................................................

.........................................................

FOLDER

FOR BELT LOOPS

FOR NO. 147-39 MACHINE

No. Plate 54055 54056

54057 54058

36326 20655

36327

50004B 20655 36330 36328 36567 20655 36027 20655

120463

1460H 20655

18116 20655

8505

131348

26276

36029 20655 • " Plate........................................................................................

36030 36031

36032

20655 20655

20655 Cloth Plate Slide (right) for 54058 20655 Cloth Plate Slide (right) complete for

20655

218B

20655 " Block.........................................................................................

20655 20655

20655 Folder Holder with 8505 and 18116....................................................

20655 20655 Feed Dog,27 teeth (16 teeth to the inch)

20655 Presser Foot Hinge Pin........................................................................

20655 " ■ Shank.....................................................................................

20655

20655 Throat Plate for 3/16 in. and 1/4 in.

Cloth Plate Slide (right) for 54056

Cloth Plate Slide (right) complete for

Throat Plate 36032, for 3/16 in. gauge. Nos. 38419,54055 and two 725J

Throat Plate 36032, for 1/4 in.

gauge. Nos. 38419,54057 and two 725J

Folder...................................................................................................

" Adjusting Screw.......................................................................

" Screw........................................................................................

'' Slide..........................................................................................

" Tongue with 36567...................................................................

" * Tip..........................................................................................

Folder on Slide complete, for belt loops,

Nos, 36326 to 36328, 36330 and two

each 218B and 50004B.............................................................

" “ Screw

.....................................................................................

" " Spring.....................................................................................

" " " Rivet

....................................................................................

for 3/16 in. and 1/4 in. gauges, for

36032.........................................................................................

Presser Foot (hinged) complete. Nos.

26276, 36029 and 36030

gauges, for 54056, 54058 and 131348.

Name

......................................................

..........................................................

+ 23 hidden pages