Form 18274
December, 1928
PBINTBD IN u. a. A.
LIST
OF
PARTS
MACHINES
Nos. 147-24 and 147-26
THE SINGER MANUFACTURING COMPANY
OorvRJOBT, U. S. A., 1925 and 1928,
BY The iiNGEB Mandpacturing Co.
Aal Rights Reserved por all Countries
INDEX
PAGE
Accessoiues.................................................................................................... 26
Bench Stand................................................................................................... 28
Foot Lifter Parts........................................................................................ 27
Knee Lifter Parts........................................................................................ 27
Machine No. 147-24......................................................................................... 7
“ No. 147-26
“ Base with Belt ClUAiu)
Numerical List of Parts............................................................................ 31
Thread Unwinder for 147-24 M.achine.................................................. 28
“ “ “ 147-26 Machine
.........................................;.......................................
................................................................
...........................
'................. 29
18
26
INSTRUCTIONS FOR ORDERING
Tn onJering from this list, use ONLY the part NUMBER
in the FIRST column.
'J'he number stamped on a Sewing Machine part is in every
case the nuinber of the, single part only. '
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Fjach numb(;r always indicates the SAME PART in whatever
list it appears, or for u'hatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows;
A—Hardened, Polished, Nickel Plated and Buffed
B—Polished, Nickel Plated and Buffed
C—Hardened Only
D—Polisiied Only
E—Soft, Not 1‘olished
F—Hardened and I’olished
IU~Blucd
,U -Nickel Plaled Only
K—Hardened and Nickel Plated
L—Brass Plated
M—Oxidized
P—.lapanned
R—Merlized
T—Copjier Plated
T. A.—Hardened, Polished, Copper and Nickel Plated
T. B.—Copper and Nickel Plated and Polished.
T. ,1.—Co))|ier and Nickid Plated Only.
T. K.—Hardened, Copper and Nickel Plated,
T. M.—Copper Plaled and O.xidized.
T. L,—Copper and Brass Plaled.
These letters MUST BE USED when they appear in the list;
and AFTER the number as in the list.
In this series;
The, figures in tin; second column refer only to the plates,
illustiatiiig the parts, ami are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
When ordering parts wliich differ as to Gauge (the distance
between seams) theOauge, as well as the Number must be
given on order.
and Buffed.^
U—Zyic Plated
V—Silver Plaled
W—Polished and Nickel Plated
Z—Chromium Plated
1 to 1500 and 50001 to 51500 are Screw Numbers.
1501 to 1800 and 51501 to 51800 are Nut Numbers.
1801 to 2000 and 51801 to 52000 are Roller Numbers.
2001 to 50000 and 52001 and upward are numbers of
Machine Parts.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 147-24
FOR FOUR LINE SHOE TIPPING; ALSO FOR EYELET ROW
STITCHING. FOUR NEEDLES, TWO LOOPERS. BY REMOVING
ONE OR MORE NEEDLES, TWO OR THREE LINE STITCHING
CAN BE OBTAINED. GAUGES BETWEEN THE FIRST AND
SECOND AND BETWEEN THE THIRD AND FOURTH NEEDLES
3', to s-i INCH AND BETWEEN THE SECOND AND THIRD
NEEDLES pg TO M INCH. SPEED UP TO 3200.
NO. I’l.ATE
'54182
—
42366
8901
8901
56006
5()003
29599
54183 8987
54192
61386 8901
8985
8901
—
.Arm, ujiirer and lower (solid) with 948n
and 5-10;H
,‘\nn Oil Pad (braided cotton) for oiling
.Arm Hock Shaft Front Bearing......................
Ann Oil I’ad (braided cotton) for oiling
Arm Rock Shaft Intermediate Bearing
Arm Oil Tube with 29599, for oiling 5432(3
“ “ “ Packing (felt)
“ Rock Shaft.....................................................
“ “ “ 54183 with 46383,540(M,
,54184 and 64255............................................
Ann Rock Shaft Bushing (back)
NAME
......................................................
................................
.........................
E62fifi
PAR^I'S r'OR MACIirNlC No. 147-24
PARTS FOR MACHINE No. 147-24
NO, I'LATK NAME
44()C 8001 Ann Rock Shaft Bushing (l)ack) SctScrevv
641188 8001 “ “ “ “ (intcnnediiitu)
42:ic 8001
Set Sin-evv
.....................................................
52047) 8901 Aj'in Rock Shaft Bushing Oil Pad (braided
i:ot ton)
...........................................................
540(11 8001 Ann Rock Shaft Collar with I wo 453o...........
45.'!c 8001 “ “ “ “ Scl Screw
......................
54184 8085 “ “ “ Crank (back) with two
50083c
............................................................
50083c 8901 Ann Rock Shaft Crank (ba<‘k) Set Screw..
01255 8011 “ “ “ “ (front) with 453c
2117 8901 “ “ “ “ “ Pin................
453c 8001 “ “ “ “ “ Set Screw..
54105 8901 “ “ “ Flanged Birshing (front)
52045 8901 “ “ “ “ “
Oil Pad (braided cotton)
.................................
453c 8001 Ann Rock Shaft Flanged Bushing (front)
Set Screw
........................................................
5400() 8987 Arm Rotary Shaft.......................................................
54448
---------
“ “ “ SlOOtiwilhOlOn,54008,
51088, 54113, 54447, 01351 and 01355..
54307 8085 Arm Rotary Shaft Bushing (front)
..........................
701e 8001 “ “ “ “ “ Set Screw
51007 8902 “ “ “ “ (intermediate)
51080
--------51007 with 04,508 and 04805
........................
(>1508 8902 .Ann Rotary Shaft Bushing (inlennediatc)
Oil Pad, long (braiihal cotton!
........................
04805 8985 Arm Rot:iry Shaft Bushing (intermediate)
Oil Pad, short (braiiled cotton!
.......................
422c 8001 Arm Rotary Shaft Bushing (intermediate)
Set Screw (h)ng).............................................
50081c 8001 Arm Rotary Shaft Bushing (intermediate)
Set Screw (short)
...........................................
54008 8001 Arm Rotary Shaft Ciollar with two 1258c
12,58c 8901 “ “ “ “ .Set Screw......
51000 8002 “ “ “ Flanged Bushing
54000
--------------
“ “ “ “ “ 54000
with 58039 and 64805
....................................
58030 8002 Ann Rotary Shaft Flanged Bushing Oil
Pad, long (braided col I on )
...........................
64805 8985 Arm Rolai V Shaft Flairged Bushittg Oil
Pad, short (braided cotrorri
.............................
1.5t)F 8901 .Arm Rotar-y Shaft Flanged Btrslting Smew
49013 8904 “ " “ Front Bearing Orl Pad
(hraiderl cottorr)
.............................................
NO. I’LATB
144i) 8901
15196 8902
286n 8‘)01
51010 8904
286n 8904
46220 8986
430c 8904
54296 8987
8902
54012
8901
38419
72.5J
8904
51013
54297 8086
51299 8086
38119 8004
725.1 8004
51208
---------
Arm Rotary Shaft Screw...............................’...
“ Sitle Coyer (back)
“ “ “ “ Thumbscrew....
“ “ “ (front)................................
“ “ “ “ Thumb Screw. ..
Balance Wheel, 2H in. pulley, with two
430c
.................................................................
Balance Wheel Set Screw....................................
Cloth Plate
...........................................................
“ “ Slide (left)...................................
“ “ “ “ Spring
“ “ “ “ “ Screw
Cloth Plate Slide (left) complete, Nos.
38419, 54012 and two 725j
Cloth Plate Slide (right) for 54298.......................
“ “ “ “ “ 54300
“ “ “ “ Spring
“ “ “ “ “ Screw. ..
Cloth Plate Slide (right) complete for
NAME
................................
.......................
...............
.............................
...............
....................
.54301, Nos. 38419, 54297 and two 72.5J
51300
------
Cloth Plate Slide (right) complete for
.54302, Nos. 38419, .54299 and two 725j
51,301
---------
Cloth Plate complete, for jh in. to in.,
A- in. to ii in. and in. to in. gauges.
51302
------
Nos. .54013, 54296 and .54298
Cloth Plate complete, for ^ in. to A in.,
.......................
'j.s in. to a in. and sV in. to in. gauges.
101U- 8001
50173F 8001
51104 8013
I235n 8004
51017 8002
Nos. 54013, 54296 and 54300
Cloth Plate Screw (left)........................................
“ “ “ (right).....................................
“ “ Thread Guard
“ “ “ “ Screw
Crank Connecting Rod with 6575, 54018,
.........................
....................................
.....................
54218, 54897, 57222 and two each 896b
and 1057 b
51088
...
---------
oOOGOc 8904
1516e 8001
Crank Connecting Rod 54017 with 50069c
“ “ “ Ball Screw Stud
Nut
61268 8001
Crank Connecting Rod Ball Screw Stud
.......................................................
it U ii it it
...................................................................
Washer.............................................................
*57222 ______
806e 8001
♦51018 ---------
105710 8004
54807 8004
Crank Connecting Rod Cap (lower)
“ “ “ “ “ Screw
“ “ “ “ (upper)
“ “ “ “ “ Screw
“ “ ' “ Oil Cup.............................
...................
................
10
PARTS FOR MACHINE No. 147-24
PARTS FOR MACHINE No. 147-24
11
NO. PLATE NAME
54218 8904 Crank Connecting Rod Oil Pad (braided
cot t nnl
..........................................................
6575 8904 Crank Connecting Rod Oil Pad Stop Pin
64269 8918 Face Plate
46111 8911 “ “ Pin
2861)8904 “ “ Tluimb Screw
54019 8902 Feed Bar with 50429c and two 453c
...................................................................
......................................................
.....................................
......................
54020 8902 “ “ Connection............................................
57225 8904 “ “ Hinge Pin
453c 8901 “ “ “ “ Set Screw
..............................................
........................
54111 8902 “ Connecting Rod with 1057e, 54112
and two 896e...................................................
54113
‘54112
--------
----------------
F\)ed Connecting Rod 54111 with 54025..
“ “ “ Cap
...........................
896e 8904 “ “ “ “ Screw
...................
1057e 8904 “ “ “ Clamping Screw. ..
54023 8911 “ “ “ Hinge Pin
.................
21500 8904 “ “ “ “ “Collar
witli 457c........................................................
457c 8904 Feed Connecting Rod Hinge Pin Collar
Set Screw........................................................
40373 6500 Feed Dog, 18 teeth (10 teeth to the inch)
for in. to in., ,’a in. to -jV hi. and
ii in. to in. gaiige.s
........................................
46374 0560 Feed Dog, 18 teeth (10 teeth to the inch1
for ,,‘2 in. to 6^1 in., hi in. to in. and
in. to in. gauges
..............................................
40459 0500 Feed Dog, 18 teeth (10 teeth to the inch)
for -¡-2 in. to in., 'g in. to ^2 in- ¡'•nd
-3-2 in. to in. gauges
.......................................
53197 8988 Feed Dog, 18 teeth (10 teeth to the inch)
for ,‘2 in. to in., 3'2 in. to I2 in. and 3I2
in. to in. gauges
..............................................
157n 8904 Feed Dog Screw.......................................................
50429c 8904 “ “ Stop Screw
‘54024
‘23729
------
“ Eccentric..............................................................
---------
“ “ Body...............................................
51001c 8958 “ “ “ Set Screw
7071 8904 “ “ Clamping Washer
..........................................
........................
..................
2171) 8904 “ “ “ “ Screw. .
54025 8985 Feed Eccentric (adjustable) complete, Nos.
217i), 1103c, 7071, 23729, 54024 and two
51001c
............................................................
1103c 8904 Feed Regulating Screw.............................................
5402() 8905 “ Rocking Frame with two 453o
54077
---------
“ “ “ 54026 with 21500,
.....................
54019, 54020, 54023 and 57225.....................
NO. PLATE NAME
57234 8911 Feed Rocking Frame Hinge Pin
....................
57235 8985 “ “ “ “ “ Bushing
453c 8901
Set Screw
........................................................
453c 8901 Feed Rocking Frame Hinge Pin Set Screw
54370 8989 Ijooper (back) with 590d and 46115
.......................
1147c 8989 “ “ Set Screw.......................................
54371 8989 “ (front)
..........................................................
Note: When ordering No. 54370 or 54371, state
gauge of machine for which required
54372
------
Looper (front) 54371 with 46377 and two
229d
......................................................................
46377 8989 Looper (front) Needle Guard with 46105. .
40105 8989 “ “ “ “ Pin...................
229d 8958 “ “ “ “ Screw
1120c 8958 “ “ Set Screw
54027 8989 “ Carrier with two 171d
.......................................
....................................
17Id 8958 “ “ Adjusting Screw
54227 8989 “ “ Connection
54228 8989 “ “ “ Shaft
..............
............................
..........................
...................
54229 8989 “ “ “ “ Bushing
440c 8901
Set Screw.........................................................
49013 8904 Looper Carrier Connection Shaft Oil Pad
(braided cotton)
...............................................
54230 8989 Looper Carrier Driver with 54032 and four
175 к................................................................
*54032
---------
175e 8958 “ “ “ “ Screw
liOoper Carrier Driver Cap
.....................................
................
54440 8990 “ Driving Shaft and Feed Lifting
Eccentric with 227d and two 64315....
54447
---------
Looper Driving Shaft and Feed Lifting
Eccentric 54440 with 54027, 54227,
54228 and 54230.............................................
‘54034 8905 Looper Driving Shaft and Feed Lifting
Eccentric Bracket with 761e
...........................
54080 8990 Looper Driving Shaft and Feed Lifting
Eccentric Bracket Bushing
701e 8901 Looper Driving Shaft and Feed Lifting
..............................
Eccentric Bracket Bushing Set Screw..
948d 8058 Looper Driving Shaft and Feed Lifting
Eccentric Bracket Screw
.................................
64315 8990 Looper Driving Shaft and Peed Lifting
227d 8958 Looper Driving Shaft and Feed Lifting
Eccentric Oil Hole Plug
..................................
Eccentric Oil Hole Screw................................
12 1’
ATU'S FOR MACHINE No. 117-24
PARTS FOR MACHINE No. 147-24
13
NO. I'LATE
OlOi)
8990
89,58
8990
40320
54001
704.1 8958
40115 8989
,590d 8958
04319 8991
54238
—
38450 8991
1133e
8958
04320
8991
1133E 8958
54320
8991
—
54329
54327 8991
1,520e 8991
54328 8991
187e
8958
40118 8991
40119 8991
4 57F 8904
40120
8991
40121
40122
54239
5-133.5
8991
—
8995
8995
54330 8995
54038
8991
170d
89,58
219d
8991
457f 8904
,54188 8991
1284n
8991
2020
8991
38100
8991
N,\ME
Looper Driving Shaft, and Feed Lifting
Jiccentric Oil Fad (liraided cotton)....
Loopin’ Driving Slmtt and F’eed Lifting
liiTcntric Screw..............................................
I.ooper Holder with 1120c and 1117c. . . .
“ “ Screw
“ Thread (hiard (double)
“ “ “ Screw
Needle Bar (hollow)
......................................
.....................
.........................
...........................................
Needle Bar complete, No-n. 40122 and
0l:il9................................................................
Needle Bar Bushing (lower)
..............................
“ “ “ “ Set Screw...
“ “ “ (upper)
.......................
“ “ “ “ Set Screw...
“ “ Connecting Link
...............................
“ “ “ “ 54320 with
54327 and .54328
Needle Bar Connecting Link Hinge Stud
U ii U U U
...........................................
Nut..................................................................
Needle Bar Connecting Stud with 21 If
and two 1S7e
.....................................................
Needle Bar Connecting Stud Clamping
Sciew..............................................................
Needle Clam]) Body
..........................................
“ “ Collar with 40120 and three
457e.....................................................................
Needle Clam]) Collar Set Screw
........................
“ “ Thread fhiard............................
“ “ Washer
.....................................
Needle Clam]) coin]ilete, Nos. 40118,
40110 and 40121
............................................
Needle (iuard, for gauges §2 'n. to FI in.
between the .second and third needles. .
Needle Guard, for gauges '/g in. to 34 in-
between the second and third needles. .
Needle Guard, for gauges ) g in. to y in.
between the second and third needles. .
Needle Guard Holder..........................................
“ “ “ Screw
...............................
“ “ Screw.............................................
“ Set Screw....................................................
Oil Cup
...............................................................
“ “ Regulating Screw....................................
“ “ “ “ S])ring
“ “ Packing (felt)
..........................................
....................
NO. l>I,.VrE NAME
54189
------
Oil Cup coin])letc, for oiling upper thread.
Nos. 1284n, 2020, 38100 and 54188. . . .
1423.1 8991 Oil Cu]) Screw......................................................
54108
------
“ Tube
54109
------
49092 8990 “ “ Packing (felt)
.....................................................................
“ “ Bracket...................................................
.........................................
54110 8990 Oil Tube complete, for oiling crank con
necting rod (up])er bearing) Nos. 49092,
54108 and 54109.............................................
04330 8980 Prosser Bar with 2,5303
..........................................
2.5303 8990 “ “ Ball, size )4 in..................................
.54325 8985 “ “ Bushing (lower)
........................
1133E 8958 “ “ “ “ Set Screw ...
38450 8991 “ “ “ ■ (upper)
........................
1133E 8958 “ “ “ “ Set Screw...
54039 8985 “ “ Guide Bracket with 453c,
640J and 1963
.................................................
640j 8958 Presser Bar Guide Bracket Adjusting
Screw
11173 8985 Presser Bar Guide Bracket Guide
..............................................................
...........................
447c 8958 “ “ “ “ “ Set Screw
1903 8985 “ “ “ “ Roller and
Stud.,...............................................................
453c 8901 ■ Presser Bar Guide Bracket Set Screw. . . .
57257 8911 “ “ Lifter
57258 8911 “ “ “ Hinge Pin
447c 8958 “ “ “ “ “ Sot Screw. .
1872 8985 “ “ “ Roller and Stud
......................
1250c 8911 “ “ “ Stop Screw
61047 8911 “ “ Lifting Bracket with 460c
and 1872..........................................................
64302 8996 Presser Bar Lifting Lever............................................
61075 8911 “ “ “ “ Connecting
Stud.................................................................
460o 8993 Presser BarLifti ngLeverConnooting Stud
54103 8905 Presser Bar Lifting Lever Extension
Set Screw
........................................................
..........................
lOln 8958 “ “ “ “ “ Screw
(left)................................................................
170d 89.58 Presser Bar Lifting LeverExtensionScrew
(right)..............................................................
802i) 8958 Presser Bar Lifting Lever Hinge Screw..
54040 8905 “ “ Spring (flat)
......................................
38468 8990 “ “ “ Stud.......................................
40173 0501 “ Foot (left guide) with 337n and
46174...
....
......................................................
46174 6.501 Presser Foot Guide (left) for 46173 ..........................
...
....
.....
14 PARTS FOR MACHINE No. 147-24
PARTS FOR MACHINE No. 147-24
15
NO. I'l.ATE NAME
337d ()f)()l Presser P’oot Guido (loft) Screw
..........................
46120 6561 “ “ (right guide) with 337d and
46127
.............................................................
46127 6561 Pressor Foot Guide (right) for 46120
337i) 6561 “ “ “ “ Screw
..........
.................
46296 t)561 “ “ “ (left) for 40299....................
337i) 6561 “ “ “ Screw (back)
665i) (i561 “ “ “ “ (front)
26276 «911 “ “ Hinge Pin
46297
46298
-------------
-------------
“ “ Plate
“ “ Shank
........................................
...........................................
.........................................
.............
.................
46299 6561 Presser Foot (side hinged) with left guide,
complete, Nos. 337n, 665d, 26276 and
46296 to 46298
..............................................
46300 6561 Presser Foot Guide (right) for 46303.....................
337i) 6561 “ “ “ Screw (back)
665d 6501 “ “ “ “ (front)
.............
.................
26276 son “ “ Hinge Pin.........................................
46301 “ “ Plate............................................
46302 “ “ Shank
.........................................
46303 6561 Presser Foot (side hinged) with right
guide, complete, Nos. 337n, 665n, 26276
and 46300 to 46302
190n 8958 Presser Foot Screw
574j «958 Press\irc Regulating Thumb Screw
.......................................
.................................................
.........................
1539J «992 “ “ “ “ laick
Nut.................................................................
51241 «990 Slack Thread Controller
54242 «990 “ “ “ Clamp
........................................
.................
lOOn 8958 “ “ “ “ Screw ...
54243 «990 “ “ Regulator
........................................
54042 «990 “ “ “ Holder with 175e
and 50150c.....................................................
175e 8958 Slack Thread Regulator Holder Clamping
Screw
.............................................................
54043 «990 Slack Thread Regulator Holder Shaft
24292 8990
Collar with 1019c
..........................................
1019c 8958 Shuik Thread Regulator Holder Shaft
Collar Set Screw
............................................
54044 8900 Slack 'fhread Regulator Holder Shaft
Crank (forked) with 1253c
............................
1253c «958 Slack Thread Regulator Holder Shaft
50150c «958 Slack 'I’hread Regulator Set Screw
Crank Set Screw
............................................
.........................
2102 «964 'Pension (under thread) Disc..................................
NO. I'l.ATE NAME
51570c 8964 Tension (under thread) Regulating
Thumb Nut.....................................................
50326c 8964 'Pension (under thread) Screw Stud..........................
59539
------
“ “ “ “ “ 50326c
with 51570c....................................................
59534 891)4 'I'ension (under thread) Spring
..............................
59537 «964 “ “ “ “ Bushing
(largo).............................................................
59538 8964 'Pension (under thread) Spring Bushing
(small)............................................................
17547 «961 'Pension (under thread) Thread Guide....
54216 8992 “ (upper thread, automatic) Body
1508.1 «992
Nut..................................................................
51333 8992 Tension (upper thread, automatic) Body
Releasing Pin
..................................................
46383 8992 Tension (upper thread, automatic) Cam
with two 1253c
...............................................
1253c 8958 'Pension (upper thread, automatic) Cam
Set Screw........................................................
2102 8964 'Pension (upper thread, automatic) Disc..
1560c 8992 “ “ “ “ Regu
lating Thumb Nut
32572 8964 'Pension (upperthread, automatic)Releas
ing Disc...
.......................................................
50106c 8992 'Pension (upper thread, automatic) Screw
Stud.................................................................
53213
------
Tension (ui)i)er thread, automatic) Screw
Stud 50106c with 1560c.................................
46385 8992 'Pension (upper thread, automatic) Screw
Stud Releasing Pin..........................................
46387 8992 'Pension (ui)per thread, automatic) Spring
54244 8992 “ “ “ “ Thread
Guide..............................................................
54215 8996 'Pension (upperthread) Bracket...
...........................
37tiu 8958 “ “ “ “ Screw'. . .
2102 8964 “ “ “ Disc
51570c 8964 “ “ “ Regulating Thumb
Nut..................................................................
32572 8964 'Pension (upperthread) Releasing Disc... .
54988 8964 “ “ “ “ Pin
..........
54246 8992 “ “ “ “ Shaft
54047 8964 “ “ “ “
Crank with 624c
.............................................
54048 8964 'Pension (iipi)er thread) Releasing Shaft
Crank Link......................................................
.....
18274-2
PAirr>S FOR МЛ(Л1ШЕ No. 147-24
PARTS FOR M.-VCHINE No. 147-24
17
NO. PLAT!*: NAME
()24c SOSS Tiiiision (ui)per tliread) Helensinii Shaft
( hank S(h S<a'e\v..........................................
54990 89()1 'Ihmsion (upiier Uiread) Releasing Shaft
.‘^Piing
...........................................................
31()F 895S 'I'cnsion (np|)(n' thread) R<‘leasing Shaft
Slop Seiew......................................................
1547j 8992 Tension (upper tliread) Releasing Shaft
Sto|) Serew Nnl..............................................
5082()c 8904 Tension (u])per thread) Screw Stud........................
595;ì9
--------
“ “ “ “ “ 50;!2lk'
with 51570c
59585 8904 Tension (upper thread) S|)ring
...................................................
................................
59587 8904 “ “ “ “ li us lung
(large)................................................................
59588 8904 Tension (up]ier thread) Siiring Rushing
(small)............................................................
57070 89()4 'I’ension (upper thread) Thread (iiiide
(dimhle)
.........................................................
53225 8998 Thread (under) Kyelet (tiaek)
190i) 8958
54072 8998
04851 8994
405c 8958
88210 8998
88211 8998
40247 8998
170n 8958
54441 8995
405c 8958
54841 8998
88481, 54842 and two 590o
................................
“ “ Scri'w
................
“ (froni) ...........................
Ni|)|)cr (Jam with 405c...
“ Set Screw...
S|iring (lower)....
" (ui)|)er). . .
“ “ Stop
“ Screw..............
Take-ui) with 405c
“ Set Serew
...............
.............
“ Staple w i t h
..........................
54049 8905 Thread (under) 'I’ake-up Staple Bracket
with 400c........................................................
965d 8998 Thread (under) Take-uj) S'tajile Bracket
Screw..............................................................
40041 8998 Thread (under) Take-up Staple Spring... .
190n 8958 “ “ “ “ “ Screw
54842 8998 “ “ “ “ Thread
Guard (left).....................................................
590n 8958 Thread (under) Take-up Staple Thread
Guard (left) Screw..........................................
38481 8994 Thread (under) 'I'ake-up Staple Thread
Guard (right)...................................................
590d 8958 Thread (under) Take-up Staple Thread
Guard (right) Screw........................................
NO. PI..\TK NAME
38482 8998 Thread (under) Take-u]) Stripper
.
207n 8998 “ “ “ “ Screw.
04855 8994 “ “ “ Thread Guard
(brass).............................................................
043.50 8993 Thread (under) Take-uj) Thread Guard
Steady Pin.......................................................
460o 8993 Thread (under) Take-up Thread Guard
Steady Pin Set Screw......................................
54332 8993 Thread (upper) Controller
2071> 8993 “ “ “ Screw
......................................
.........................
46009 8993 “ “ Eyelet.....................................
190i) 8958 “ “ “ Screw
.............................
.54094 8993 “ “ Take-up..................................
.5409.5 8993 “ “ “ Plate
..........
54710 8993 “ “ “ “ Spring....
1449d 8993 “ “ “ “ “ Serew
54090
---------
Thread (upper) Take-up complete, Nos.
I449u, 54094, ,54095 and 54710
211f 8958 Thread (upper) Take-up Set Screw
....................
...........................
40394 0500 Throat Plate with two each 005d and
40390, for 40373.............................................
4639,5 0500 Throat Plate with twm each 005d and
40890, for 46874.............................................
40400 6500 Throat Plate with two each 005» and
40075, for 40459.............................................
53198 8988 Throat Plato with two each 665» and
40890, for ,53197............................................
742f 8998 Throat Plate Screw....................................................
40890 0500 “ “ Thread Retainer for 46394,
46895 and .58198............................................
46075 8993 Throat Plate Thread Retainer for 46460...
665» 6561 “ “ “ “ Screw
..................
IS
LIST OF PARTS COMPLETE
FOR
MACHINE No. 147>26
FOR VAMPING AND FOXING SHOES. TWO NEEDLES, TWO
LOOPERS. GAUGES FROM TO INCH.
SPEED UP TO 3500
NO. ri..\Th’, Name
*5-1001
-----
.\vm, upper and lower (solid) wiÜi 9-lSu
and ,5 l0;i4......................................................
42300 8901 Oil Pad (braided eottoii) for oiling
.\iin Hock Shaft Front Bearing
50000 8901 Ann Oil Pad (braiih'd cotton) for oiling
50003 S9S5 Arm Oil Tube wit h 29599, for oiling 54320
'29599 S901 “ “ “ Ihutking (felt)
5400'2 8902 “ Hock Shaft............................................
54079
G4380 8901 Ann Hock Shaft Bushing (back)
()l;iS8 8901 “ “ “ “ (interincdiaUi)
52045 SOtll .Ann Rock Shaft Bushing Oil Pad (braided
54004 8901 .Ann Rock Shaft Collar with two 453c
54005 8901 “ “ “ Crank (back) with two
50083c 8001 .Ann Rock Shaft (¡rank (back) S(9 Screw. .
()4255 8911 “ “ “ “ (front) with 4,53c.
51105 8001 “ “ “ Flanged Bushing (front)
52045 soot
5400(1 8987 Ann Hotar,v Sliaft.....................................................
54384 ------ “ “ “ 54006 wit h 640i), 54008,
----------
440o 8901 “ “ “ “ “ Set Screw
4'23o 8901
453i; 8901 “ " “ “ Set Screw
■2117 8901 “ “ “ “ “ Rill
453c 8001 “ “ “ “ “ Set Screw..
45:Sc 8901 .Ann Rock Shaft Flanged Rushing (front)
.Ann Rock Shaft Int(!nnediat(‘, Bearing
“ “ “ 54002 with 54004, 54005
and 0F2.55......................................................
Set Screw........................................................
cotton)
............................................................
50083c............................................................
Oil Bad (braided cotton).................................
Si't Screw........................................................
54088, 54113, 54383, 64351 and 64355..
.......................
...............................
.............
.................
.....
......
PARTS FOR MACHINE No. 147-26
NO. PI.ATE NAME
54367 8985 Arm Rotary Shaft Bushing (front)..........................
761E 8901 “ “ “ “ “ Set Screw
54007 8902 “ “ “ “ (intermediate)
54089
61.508 8902 Arm Rotary Shaft Bu-shing (intermediate)
64805 8985 Arm Rotary Shaft Bushing (intermediate)
50084c 8901 Arivr Rotary Shaft Bushing (intermediate)
54008 8901 Arm Jtotary Shaft Collar with two 1258c
54009 8902 “ “ “ Flanged Bushing
54090
58039 8902 .Arm Rotary Shaft Flanged Rushing Oil
64805 8985 Arm Rotary Shaft Flanged Bushing Oil
49013 8901 “ “ “ F’ront Bearing Oil Pad
15196 8902 “ Side Cover (hack)
54010 8904 “ “ “ (front)
64259 89R1 Balance Wheel with two 430c
54199 8987 Cloth Plate...................................................................
.54012 8902 “ “ Slide (left)
38419 8901 “ “ “ “ Spring
54013
,540,55 8986 Clutli'Plale Slide (right)............................................
38419 8904 “ “ “ “ Siiring
54056 — - Cloth Plate Slide (right) oom|)lete. Nos.
54'200
50473k 8904 “ “ “ (right)
------
“ “ “ “ , “
54007 with 64508 and 64805
Oil Pad, long (braided cotton)
Oil Pad, short (braided cotton)
422c 8901 Arm Rotary Shaft Bushing (intermediate)
Set Screw (long)
Set Screw (short).............................................
l'258c 8901 “ “ “ “ Set Screw
-----------
“ “ “ “ “ 54009
with 58039 and 64805.....................................
I’ad, long (braided cotton)
Pad, short (braided cotton)..............................
159i'' 8901 Arm Rotary Shaft Flanged Bushing Screw
144i) 8901 Arm Rotary Shaft Screw..........................................
2S6d 8904 “ “ “ “ Thumbscrew ...
2861)8901 “ “ “ “ Thumbscrew...
4)i0c 8901 “ “ Set Screw
72,5.1 8904 “ “ “ “ “ Screw
---------
7'25j 8904 “ “ “ “ “ Screw. . .
--------
lOllF 8904 Cloth Plate Screw (left)
(braided cotton)...............................................
Cloth Plate Slide (left) eotnplete, Nos.
38419, .54012 and two 72,5.i
38419, .540,55 and two 72,5.i
Cloth Plate complete. Nos. 54013, 54056
ami 54199
.............................................
.................................
........
.......................................................
.........................
........................
.......................
............
...................
..............................
...................................
.....................................
.................................
.............
.................
.........................
.........
........................
.............................
.......................
..
19
...
20 1>A1{TS FOR MACHINK No. 147-20
NO. ri,.\TK N.-\MK
54101 S',(i:i Cloth ríate Tliread Guard......................................
12.4511 S904 “ “ “ “ .Serew....................
54017 .S902 Crank Coniiei fin;; Rod with 0575, 5401S,
, 51218, 5481)7, 57222 and two each 81)0e
540S8
' and 10.57E
------
Crank Connect Inii Rod 54017 with .50009o
......................................................
50000o 8001 '• “ “ Hall Serew Stud
1510I-; 8001 “ “ “ “
Nut..................................................................
04208 8001 Crank Connect inf? Rod Hall Screw Stud
l\'a.sluT...........................................................
♦57222
------
Crank Connectinjr Rod Cap (lower)
......................
800k 8001 “ “ “ “ “ Httrew
♦,54018 “ “ “ “ (upper)
..........
1057 k 8001 “ “ “ “ “ Screw
54807 8001 “ “ “ Oil Cup
....................
,54218 8001 “ “ “ “ Had (braided
cotton).............................................................
0.575 8001 Crank Connectini; Rod Oil Had Stop Pin
01200 8014 Face Plate
40111 8011 “ “ Pin
280i> 8001 ” “ 'rhumb Screw
.........................................
......................................................
.....................................
,54010 8002 F'eed Bar wit li ,50120c and I w'o 454c.................
51020 8002 “ “ Connection...................................
.57225 8001 “ “ Ilinse Pin
....................................
154c 8001 “ “ •' " Set Screw........................
54111 8t)02 “ Conne(4inK Rod with 1057k, 54112
and I wo 800k................................................
5-1114 Fc(‘d Counectinff Rod 54111 with 51025. .
♦,54112 " “ “ Cap.....................
SOOk 8001 “ “ “ “ Screw
..................
1057 k 8004 “ “ “ Chun pi nil Screw' . . .
,5)024 8011 “ “ “ IliiifiePiu
.................
21.500 8001 ■■ “ “ “ “ Collar
wit li 457c
......................................................
457c 8001 l''eed Connectiufl Rod llinjie Pin Collar
Sci S(T‘)w......................................................
51410 8088 Feed Don, 17 teeth (10 teeth to tlie inch)
157ii 8001 “ “ Screw'
.................................................
50120c 8001 •“ “ Stop Screw..........................................
♦54021 - -- “ Kccentric......................................................
♦24720 - - “ “ Body...............................................
51 Otile 8058 “ “ “ Set Screw
7071 8004 “ “ Clamping Washer
........................
..................
217i) 8004 “ “ “ “ Screw
PAirrS FOR MACHINK No. 147-26
NO. l'K.\TK NAME
,51025 808,5 F'eed Kccentric (adjustable) complete, Nos.
217i), 1103c, 7071, 23729, 54021and two
51061c
............................................................
1103c 8001 F’eed Regulating Screw
...........................................
5402(i 8005 “ Rocking F’rame with two 453c
,54077
------
“ “ “ 54026 with 21,506,
54019, ,54020,'54023 and 57225
...................
57234 8911 F’eed Rocking F'rame Hinge Pin
57245 8085 “ “ “ “ “ Bushing
1,54c ,8001 “ “ “ “ “
Set Screw........................................................
453c 8001 F'eed Rocking F'rame Hinge Pin Set Screw
54330 8001 Hooper (back) closed eye
1147c 8080 “ “ SetScrew
54310 8004 “ (front) closed eye
.......................................
........................
........................................
Note; When ordering Nos. 54339 or ,54340, state
gauge of machine for which required
1120c 8058 T.ooper (front) Set Screw.........................................
54027 8080 “ Carrier with two 171i)
171i) 8058 “ “ Adjn.sling Screw
54227 8080 “ “ Connection
................................
..........................
........................
,54’228 8080 “ “ “ Shaft.................
54220 8080 “ “ “ “ Hn.shing
446c 8001 “ “ “ “ “
Set Screw
........................................................
40013 8001 Hooper Carrier Connection Shaft Oil Pad
(braided cotton)
..............................................
54230 8080 T.ooper (’arrier Driver with 54032 and four
175k................................................................
♦54032
------
Hooper Carrii'r Drivei-Cap.....................................
)75k 80.58 “ “ “ “ Screw
..................
5446.8 8001 “ Driving Shaft and F’eed l.ifting
Flccentric with 227i) and two 64315. . ..
5i:!84 -- Hooper Driving Shaft and F’eed Hifting
Flccentric 54368 with ,54027, 54227,
54228 and 54230
............................................
♦54034 ,8005 Hooper Driving Shaft and F'eed Hifting
Flccentric Bracket with 761e
.........................
540,80 8000 Hooper Driving Shaft and F’eed Lifting
Flccentric Bracket Hushing............................
761k 8001 H()0|ier Driving Shaft and Feed I.ifting
Flccentric Bracket Bushing Set Screw..
948i) 8958 I.ooper Driving Shaft and F’eed Lifting
Kccentric Bracket Screw
................................
64315 8000 l/ooper Driving Shaft and F'eed Lifting
Flccentric Oil Hole Ping
.................................
21
...
...
22 PARC'S FOR MACHINE No. 117-21)
PARTS FOR MACHINE No. 147-26
23
NO. PLATE NAME
227i) 8!)58 I>oo]HT Driving Kluill ami Feed Tafting
I'leeenlrie Oil Hole Screw..............................
'!0:!2t) 81)00 Looper Driving Shalt and Feed Lifling
lieceiilrie Oil Pad (braide<l coltou)....
O-lOi) 8058 Looper Driving Shall and Feed Filling
Kccentrie Screw.............................................
5'10(H 8000 I>(ioper Holder with 1120(; and 111;7('. . . .
701.1 8058 “ “ Screw............................................
64310 8001 Needle Har (hollow)
51062
---------
Needle liar coniplele, No.s. 51064, 51065
and 61310
38456 8001 Needle Har Hushing (lower)
...............................................
.......................................................
.............................
1133e 8058 “ “ “ “ Set Screw...
64320 8001 “ “ “ (u|)|)er)
........................
1133E S05S “ “ “ “ Set Screw...
54326 8001 “ “ Coimeetiiig Link
54329
------
“ “ “ “ 54326 wilU
54327 and 54328
........................................
.........................
54327 8001 Needle Har (lonnecting Tank Hinge Stud
1520e 8091
Nut..................................................................
54328 8991 Needle Har Connecting Stud with 21 If
ami l.wo 187e.................................................
187e 8958 Needle Har Connecting Stud Clamping
Screw..............................................................
51064 8901 Needle Clam]) with t wo 1 lOSr
............................
51065 8001 “ “ Thread Cuard................................
.F1320 8995 “ Guard....................................
54038 8991 “ “ Holder
176i) 8958 “ “ “ Screw
21 9d 8001 “ “ Screw
1408f 8958 “ Set Screw
54108
---------
Oil Tube.................................................................
51109
---------
“ “ Hracket..................................................
...................................................
49092 8900 “ “ Packing (felt)
...................................
...............................
....................................
........................................
54110 8090 Oil Tube com])lete, for oiling crank con
necting rod (ui)])cr bearing) Nos. 49002,
51108 and 54100............................................
64330 8986 Pre.sser Har with 25303....................................
25303 8990 “ “ Hall, size ‘.r in...............................
64331 8911 “ “ Hushing (lower)
............................
1133E 8958 “ “ “ “ Set Screw...
38456 8991 “ “ “ (u|)per)
................................
1133e 8958 “ “ “ “ Set Screw...
51039 8985 “ “ Guide Hracket with 453e,
640,1 and 1963
............................................
NO. PLATE NAME
640.1 8958 Presser Bar Guide Bracket Adjusting
Screw
..............................................................
11173 8985 Presser Bar Guide Bracket Guide...........................
4470 8058 “ “ “ “ “ Set Screw
1063 8985 “ “ “ “ Roller and Stud
453o 8001 “ “ “ “ Set Screw
57257 8011 “ “ Lifter
...........................................
57258 8011 “ “ “ Hinge Pin
...........
.......................
447c 8958 “ “ “ “ “ Set Screw..
1872 8985 “ “ “ Roller and Stud
.............
1250c 8911 “ “ “ Stop Screw......................
61017 8911 “ “ Lifting Bracket with 460c
and 1872..........................................................
64362 8096 Pressor Bar lafting Lever
..........................
61075 8011 “ “ “ “ Connecting
Stud.................................................................
460c 8993 Presser Bar Lifting Lever Connecting Stud
Set Screw. . .-..................................................
54103 8005 Presser Bar Lifting Lever Extension
......................
16li) 80,58 “ “ “ “ “ Screw
(left)
................................................................
176i) 8958 Presser Bar Lifting Lever Extension Screw
(right)
...........■.....................V........................
802i) 8958 Presser Bar Lifting Lever Hinge Screw...
54040 8905 “ “ Spring (flat)
3846H 8000 “ “ “ Stud
54321
------
“ Foot......................................................................
54322 8004 “ “ Spring Guide
725.1 8901 “ “ “ “ Screw
......................................
.......................................
................
................
54323 8004 Presser Foot complete, Nos. 725j, 54321
and 54322........................................................
lOOi) 8958 I’resser Foot Screw
.................................................
57 iJ 8058 Pressure Regulating Thumb Screw...... .
1530J 8092 “ “ “ Lock
Nut
..................................................................
54381 8994 Slack Thread Controller
54212 8000 “ “ “ Clam))
..........................................
.....................
1 1001) 8058 “ “ “ “ Screw....
61337 8005 “ “ Regulator
..................................
51012 8900 “ “ “ Holder with 175e
and ,50150c
.....................................................
175e 8958 Slack Thread Regulator Holder Clamping
Screw...............................................................
54043 8090 Slack Thread Regulator Holder Shaft
.........................
24202 8090 “ “ “ “ “ Collar
with 1019c
.......................................................
24 I’AllTS l-’OR MACHINK No. H7-2()
BAHTS BOR MACHINE No, 447-26
25
NO. I'I.,\TK N-4ME
Ull'Jc Syr>S Sliudi 'I'lnoad Keff'dator IloliU'r Shaft
(/'olhir iSct .Scccvv........................................
.SlOll SD90 Slack 'riircad Hcf'ulator lIoKliir Shaft
Crank (forked' with 125dr
..............................
I25l!o SD.aS Slack d'liread liegulalor Holih'r Shaft
Crank Set Screw.............................................
fjOlSOi; .SOAS Slack'I'hread Ucfiulatdr Set Screw
.....................
2102 NOdt 'Pension (under t hread) Disc....................................
fiCaTOc SiHil “ “ Itegulatinii'rhumb
Nut
.................................................................
.')002()c 8004 'Pension (under thread) Screw Stud
50,480
--------
" “ “ •• •' 508200
with 51570O
..................................................
.......................
50584 8004 'rension (under liiread) Spring................................
50587 8001 “ “ “ “ Bushing
(large).............................................................
50588 8004 'Pension (under thread) Spring Bushing
(small)
............................................................
17517 8001 'Pens'on (under I hread) 'Phread (luide.. . ,
54070 8000 “ (ui)per t hread) Bracket........................
8701) 8058 “ “ “ “ Screw...
2102 8004 “ “ “ Disc
....................
51570c 8001 “ “ ■“ Regulating'Phuinh
Nut
.................................................................
82572 8004 'Pension (u))per 1 bread) liideasing Dise... .
51088 8004 “ “ “ “ Bin
.........
.51071 8002 “ “ “ ■* Shaft
51017 8001
Crank iv'ith 021c............................................
51018 8004 'Pension (u))i)er threail) Releasing Shaft
Ci'ank Bluk.
...
...............................................
021c 8058 'I'ensimi ( u|i|)Cr I hread) Relea.sing Shaft
Crank Set Screw.............................................
51000 8004 'Pension (iip|)er thread) Releasing Shaft
Bpriiili............................................................
81(tK 8058 'Pension (upi)cr thread) Releasing Shaft
Slop Screw
.....................................................
1547.1 8002 'Peiisimi (upper thread) Releasing Shaft
Stop Screw Nut
50820c 8004 'Pension (upper thread) Screw Stud
50580
---------
“ “ “ “ “ 50820c
..............................................
.........................
witli 51570c....................................................
59.5‘.i5 8004 Ti'nsioii (upi)cr t bread) Spring........................
50,587 8004 “ “ “ Bushing
(large).............................................................
50588 H004 'Pension (upper threail) Spring Bushing
(siiiall)............................................................
NO. PL.VnO NAME
47547 8004 'Pension (upper thread) 'Phread Guide... .
54204 8002 Thivad Lnhricafijig Oil Cup.......................
57020 8002 “ “ “ “ Pad (felt).. .
54205 8992 “ “ “ “ Thread Oiihle
217.1 8004 “ “ “ “
Screw...............................................................
54200
------
'Phread Lubricating Oil Cup complete,
Nos. 217.1, 54'204, 5420.5 and 57629
5822,5 8908 Thread (under) Eyelet (back)
..................................
...........
lOOi) 89,58 “ “ “ “ Screw................
,54072 8008 “ “ “ (front)
.............................
64851 8004 “ “ Nipper Cam with 405c...
405c 80,58 “ “ “ “ Set Screw...
38210 8008 “ “ “ Spring (lower)....
88211 8008 “ “ “ “ (upper)...
40247 8008 “ “ “ “ “ Stop
170n 80,58 “ “ “ “ Screw
,3847.5 800.5 “ “ Take-up with 465c
405c 80.58 “ “ “ Set Screw
..........
..................
..............
54485 8004 “ “ “ Staple with 590o
and 38481........................................................
54040 8005 'Phread (under) 3’ake-up Staple Bracket
wit h 400c........................................................
00.5i) 8098 'Phread (under) 'Pake-np Staple Bracket
Screw...............................................................
40011 8008 'Phread (under) 'Lake-up Stajile Spring
lOOi) 80,5« “ “ “
Screw...............................................................
.38481 8004 'Phread (under) 'Lake-up Staple 'Lhread
Guard
..............................................................
500i> 80,58 'Lhread (under) 3'ake-ttp Staple 'Lhread
Guard Screw....................................................
,'18482 809,3 'Lliread (under) 'Lake-up Stripper
..........................
2071) 8998 “ “ “ “ .Screw..
61.355 8994 “ “ “ Thread Guard
(I )rass)............................................................
6)3.56 899.3 'I'hread (under) Take-up 'Lhread Guard
Steady Bin.......................................................
460c 8908 'Lhread (under) 7'ake-iip 'Lhread Guard
Steady Bin Set Screw......................................
54.381 800.8 'Lhread (npi)er) Controller
207d 8008 “ “ “ Screw
46000 8008 “ “ Eyelet
.....................................
.........................
.....................................
lOOi) 8058 “ “ “ Screw.............................
,5'I001 800.3 “ “ 'Lake-up..................................
,54005 8008 “ “ “ Blate...
54716 8008 “ “ “ “ Spring..,.
2()
NO. 1>L.\TE N.\MK
1 I li)i) S<(93 'I'lircad (ui)per) 'Fake-up Plate Siiriiif;
.'iKMHi
21 Ilf S95S 'Fliread (upper) 'Fake-up Set Serew
541521 S9SS 'Flu-oat Plale for 5 i:il9
7 12k S991i “ “ Serew
PAirrS F()]l MACIflNE No. 147-2ti
-------
Scu'evv..........................................................
'Flii-ead (u|)p(a-) 'Fake-up eompUde, Nos.
1 lUlL), f)4094, 5109.5 and ,5471t>
...........................................
.............................................
................
.......................
FOOT LIFTER PARTS
NO. PLATE NAME
0439 --------- Chain, 36 in. to 45 in., with 56864 and
50805
..............................................................
Note; When ordering No. 6439, give
length required
27
ACCESSORIES
No.
l>L.\TE
120314 8941 oiler ((aipper plated
120315 8941
26026
26185 8911
38187 ,8911 'I’lmaiding Wire. . . .
120:; 11
8911
,8911 'Fweifzer.s (curved)..
8908 89 11
19221
8911
4822
8911
“ S|)i)ut, 5 in. Ini
Ser<nv Driver (large)
Wreneli for 1.520. . .
MACHINE BASE WITH BELT GUARD
.No. I-r.VrE N'.WIK,
54d.5t) S9iS0 Pelt (iuard with lt92i;..............................................
27517 S9S5 “ “ lliuiie Pin
1192e S9H5 “ “ “ “ Set Serew
n',)2(' S9S5 “ “ Set Serew
515.77 S9S0 Maelune Base wit h 1192c.......................................
51072k St)95 “ “ Boll with 51581b
51581B K!l‘.»5 “ “ “ Nut
ti075 8990 ' “ “ “ “ Wa.sher
49125 8990 “ “ Oil Pipe
OOsSt 8985 “ “ “ “ Plug.............................
.57285 8990 “ Cushion ffelt)
91.8B S9.58 “ Serew, to fasten maehinc to Base
515.58
--------
Machine Base with Belt Guard coinplele,
Nixs. 27547, 19125, 545,50, 54557, 00881,
three each 0055, 51072b and four each
948b and 57285
na:
“ “ (small
“ '■ 1516...
“ “ 1,517....
..........................................
....................
...........................................
......................
....................................
....................
.......................................
.....................................
...............................................
4879 8941 Chain Connecting Link...........................................
,56864 8941 “ Hook (large).................................................
,56865 8985 “ “ (small)
120249 8980 Treadle
-1882 8941 “ Shaft
126250 8941 “ Spring....................................................
120251 8980 “ Stand
126252 8980 Treadle complete. Nos. 4882, 126249 to
....................................................................
120251 and two wood .screws 1 in. No. 16
.................................
......................................................
.....................................................
............
KNEE LIFTER PARTS
PLATB
NO.
37563
56861 8911
,5680,5 8985
—
8980
2703
12242 8980
8980
6335
6336
—
,8980
2766
8985
356c
8980
2767
8985
356c
8980
6337
8980
7125
356c 8985
8985
356c
8980
2770
8985
356o
8980
23767
Chain, length 15 in., with 56864 and 5080.5
“ Hook (large)
“ “ (small).............................................
Bo(!k Shaft..........................................................
“ “ Hanger with two wood screws
1 in. No. 10.....................................................
Rock Shaft Knee Arm.........................................
Rock Shaft Knee Arm complete. Nos.
2766, 2767 and 6335.......................................
Roek Shaft Knee Arm Hubwith356o. . . .
“ “ “ “ “ Set Screw
“ “ “ Plate with 356c........................
“ “ “ “ Set Screw
“ “ Lifting Bracket with two 356o
“ “ “ “ Hook
“ “ “ “ “ SetScrew
“ “ “ “ SetScrew
“ “ Stop Dog with 356c
“ “ “ “ SetScrew
Rock Shaft complete. Nos. 2763, 2770,
NAME
...........................................
................
........................
.......................
.................
...........................
.........................
6336, 6337, 7125 and two 12242.......
28
29
BENCH STAND
i\o.
79H11
41538
121)247
121)248
t)0t)5t)
9370
5004
-------
8952
8952
8952
8952
8952
Henoh Stand with 5()04, 9370, t.wo 41538,
(hrce wood sciews 'a. No. 11, four
001)50 and sixtoeii wooil scrcw.s in.
No, 7...............................................................
Flu.sli Bolt with Idate comi)lete, Nos.
120247, 120248 and four brass wood
.screws h). No. 4.............................................
Flush Bolt
IlintiC..................................................................
Slide Si)ring........................................................
...........................................................
“ Plate
“ “ Pin.....................................................
NAME
..................................................
THREAD UNWINDER
FOR SIX SPOOLS
FOR 147-24 MACHINE
NO. PLATE NAME
225395 8953 Spool Rest (for two spools) with 201018c
225388 8953 “ “ Rod
200383c 8985 “ “ “ Set Screw.................................
201018c 8985 “ “ Set Screw
202490 8953 ' Stand with 2tl0383c
225391 8953 Thread Guide..........................................................
201090.1 8995 " “ T.ock Nut
225392 8953 “ “ Rod with 208e and 225393
208b 8985 “ “ “ Screw
225393 8995 “ “ “ Washer
225378 8997 'I'hread Unwinder complete, Nos. 201090,1,
202490, 225388, 225392, three 225395,
SIX 225391 and three wood screws pg in.
iNo. 12............................................................
27739 8990 Thiead Cone (wood) for largo cones......................
225390 8990 “ “ Holder, for inverted cones.
Note: Nos. 27739 and 225390 are used with,
but not included in, 225378
...................................................
..........................................
......................................
.......................................
.............................
...........................
THREAD UNWINDER
FOR FOUR SPOOLS
FOR 147-26 MACHINE
NO. PLATE NAME
225395 8953 S[)Ool Rest (for two spools) with 201018c. .
22,5388 8953 “ “ Rod.....................................................
200383c 8985 “ “ “ Set Screw...................................
201018c 8985 “ “ Set Screw............................................
202190 89.53 “ Stand with200383c.......................................
22,5391 8953 Thread Guide
2011)90.1 8995 “ “ LoekNut
225392 8953 “ “ Rod with 208e and 225393
208b 8985 “ “ “ Screw...............................
22,5393 8995 “ “ “ Washer
225398 8953 Thread Unwinder complete, Nos. 201696J,
27739 8996 4’hread Gone (wood) for large cones
225390 8996 “ “ Holder, for inverted cones..
Note: Nos. 27739 and 225390 are used with,
but not included in, 225398
..........................................................
..........................................
............................
202490, 225388, 225392, two 225395,
four 225391 and three wood screws
in. No. 12
........................................................
.....................
NUMERICAL LIST OF PARTS
31
NO. I'I..\TK
Mil) .silOl
1571) Sl»04
l.'i'.tF SUOI
Hill) .SOÒN
17111 ,S()5S
17.'ii: S1I.7S
17r)0 S'lfiS
17(ii> S')5S
17IÌ1I MiriN
17(iii S'lfiS
1S7k S(I')S
H.lOii ,S()r>S
10011 S0.7S
lOOl) SOfiS
lOOii Ml.l.s
lOOii S05S
207i> soo:>
207ii >sOO:i
■-’OSF NOSO
211k SO.IS
217i) SOOl
217.1 SOOl
210» SOOl
227» SOoS
220» SO.IS
2S(i» SOOl
2Sli» SOOl
2S0» SOOl
Ok SOOS
•'ll
NAME
Ann Hotiuy Shaft. Screw
....................................
Feed Hop; Screw.................................................
Ann Kotary Shaft F'langed Hushing Screw
Prcsscr Bar Lifting Lever Extension Screw
(left)
................................................................
Ia)o|)er Carrier Adjusting Screw for ,14027
'• Driver ('apScrew for.1l2;i0
Slack 'I'hiead Regulator Holder Clani|)ing
SiTCw for .14012............................................
Ni’cdle (¡Hard Holder Screw
..............................
Rre.sser liar fafling Lever Extension Screw
fright)..............................................................
Thread funder) Nipiier Spring Screw..................
Needle Bar Connecting ¡Stud Clainjiing
.Screw for ,11:i2S
I’resser Fool Screw
...........................................
.............................................
Slack 'rhresni Controller (^lainp Screw. . .
Thread (under) Eyehit (Lack) Screw
..................
“ 'I'ake-up Staple Spiing
Screw...............................................................
d'hreail (upper) Eyelet Screw
..............................
" (under) 'I'ake-up .Stripper Screw .
(iip|)er) Controller .Screw
....................
" Hnwinder 'I'liread tiuide Rod
Screw for 22,i:i02 ...........................................
Tlu'cad fu|)per) 'Fake-up Set .Screw for
51428...............................................................
F'eed Eci'enlric Clani|)ing Washer Screw
for 54025.........................................................
'I’liread LiiLricating Oil Cup 'Fhread (luide
.Screw for 54201)............................................
Needle, Cuard Screw
..........................................
Looper Driving .Shaft and Feed Lifting
Eccentric Oil Hole .Screw for .1141)8 and
.14440..............................................................
Loo]ier (front) Needle (!uard Screw for
54472...............................................................
.\nn Side Cover (Lack) 'rhuniL .Screw ...
" " “ (front)'FlunnL .Screw.. .
Faci' Plate 'rluiniL Screw....................................
Ten.sion (ii|)per thread) Releasing Shaft
Slop .Screw
.....................................................
NUMI':UI(UL LIST OK IWUTS
NUMERICA!. LIST OF BAR'BS
33
NO. NAM1Í
3371) I’rcs.si'r Foot, (iiiide (Icfl) Screw for -i(il73
337i, “ “ “ (riglit.) Screw for
КИ30
..............................................................
337i) (i5(il I’rcssci- l'\)ol (luide S(o-ew (buck) for UV21)',)
uml -KkiíKí
....................................................
ЗГ)Г)с, HOSf) Rock ShufI Knee Ann Hul) Set Screw for
27(H) ...........................................................
ЗГ)()г S0S.5 Rock Slmft Knee Rlute Set Screw for 2707
350c S9S5 “ “ l-iftiiifi Bracket Hook Set
Screw for 0337
...............................................
350c S9S5 Rock Shaft Liftinp; Ifracket Set Screw for
()337 ..............................................................
350c S')S5 Rock Sliaft Slo)) Dop; Set Screw for 2770
370i) ÍS05S 'I'eii.sion (upper thriaut) lirackel Sn-ew. ..
122c S!)0l Arm Rotaiy Shaft. ИинЫпр (inlcrinediatc'l
Set Screw (loop) ............................................
•123c 8901 Arm Rock Shaft liu.sliiiip (¡Tdermediate)
Set Screw........................................................
130c 8901 Balance Wheel Set Screw for 10220 and
01259
.............................................................
110c 8901 Arm Rock Shaft. Bu.sljinp (laick) Set Screw
•110c 8901 Booper ('airier Connection Shaft Bnalcnp
S('l S(T(“VV
..................................................
tl7c 8958 Rres.sm- Bar Cniile Bracket Cuide Set
Screw..............................................................
417c 8958 I’re.-ssei- Bar Lifter llinpe Bin Set Screw
453c 8901 Arm Rock Shaft, Collar Set Screw for
54001
............................................................
453c 8901 Arm Rock Shaft Crank (front) Set Screw
for 01255........................................................
453c 8901 Arm Rock Shaft Klanped Bnahing (front)
Set Screw
.......................................................
453c 8901 Feed Bar 1 tinge. Bin Set Scri'w for 5 1019
•153c 8901 “ Rocking Frame Hinge Bin Bushing
Set Screw
.......................................................
•153c 8901 lò'ed Rocking Frame Hinge Bin Set Screw
for 54020........................................................
453c 8901 Bre.s.ser Bar Cuide Bracket Set Screw for
54039 .............................................................
457c 8901 l''(‘cd Connecting Hod Hmge Bin Collar
Set Screw for 21500
.......................................
157f 8901 Needle Clamp Collar Set Scrmv for 40119
457f 8901 “ Set Screw for 10119
.............................
400c 8993 Bi-es.serliar l,ifthig Lever Connect ing SI ud
Set Screw for 01017 ......................................
100c 8993 d'liread (under) 'Bake-up 'Blircad Ciianl
Steady Bin Set Screw for 51019
I’l.ATIO
NO.
105o 8958
405o 8958
<8958
574,1
590n 8958
8958
5901)
5901) 8958
8958
590n
021c
8958
04 On
040j
8958
005i)
0501
005n
0501
704,1
8958
725,1 8901
8901
725j
725,1
8901
742i- 8993
8901
701e
701e 8901
802 n
8958
890 E
8901
890 E
8901
9 18i)
8958
91810
8958
9051)
8993
lOIlE
8901
NAME
Thread (under) Nipper Cam Set Screw
for 04351.........................................................
'Bhread (under) 'Bake-up Set Screw for
38475 and 51141
............................................
Bre.s.sure Hegulaling Thumb Screw
Jiooper 'Bhread Cuard Screw for 54370. . .
'Bhread (under) 'Bake-up Staple 'Bhread
Cuaril Screw for 54435...................................
'Bhread (under) 'Bake-up Staple Thread
Cuard (Irlt) Screw for 54341
'Blireiul (under) 'Bake-up Staple Thiaaid
Cuard (right) Screw for 54341
Ten.sion (upper thread) Releasing Shaft
Crank S(H. Screw for 54047...........................
8958
Looper Driving Shaft and F'eed Lifting
Eccentric Screw for 54384 and 54148...
Pre.sser Bar Cuide Bracket Adjusting
Screw for 54039..............................................
Bnesser Foot Cuide Screw (front) for 40299
iind 10303
.......................................................
'Bhroat Fiate 'Bhread Retainer Screw for
40394, .10395, 40400 and 53198
Loo|ier Holder Screw
..........................................
Cloth Fiate Slide (left) Spring Screw for
54013...............................................................
Cloth Fiale Slide (right) Spring Screw for
54050, 54298 and 54300.................................
Pre.sser Foot pS|)ring Cuide Screw for 54323
'Bhroat Plate iScrew
............................................
Arm Rotary ¡Shaft Bushing (front) Set
Screw
..............................................................
Looper Driving Shaft and Feed Lifting
Eccentric Bracket Bu.shing Set Screw
for 51034.........................................................
Presser Bar Lifting Lever Hinge .Screw. . .
Crank Connecting Rod Cap (lower) Screw
for 51017.........................................................
F'eed ('onnect ing Rod Cap Screw for 54111
Looper Driving Shaft and F'eed Ijifting
Eccenti-ic Bj-acket Screw for 54001 and
54182...............................................................
Machine Screw, to fasten machine to base,'
for 54358.........................................................
'F’hread (under) Take-up Staple Bracket
Screw
..............................................................
Cloth Plate Screw (left).......................................
..................
..........................
........................
....................
34 NUMIÍRICAL LISI’ OF ILARTS
NO. :
РЬ.ЛТЕ
Sla<tk Thread Regulator Holder Shaft
81)Г)8
lOlito
Collar Set Serew for 24292
8901 Crank (lounectiug Rod Ca]) (u|)per) Screw
10.57k
for .54017
1057 k
Feed Counectiiig Rod Clamping Screw
SíJOt
fur .54111
1103c 8901
1120c
1133E 89,58
1133k
1133k
1133k
Fiaal Regulating Sitrew for 54025
Looper (front) Set Screw for 54061
89Г)8
Needle Bar Bushing (lower) Set Serew. . .
89,58
“ “ “ (up})er) Set Screw...
89,58 Presser Bar Bushing (lower) Set Screw...
8958
“ “ “ (upper) Set Screw...
NAME
............................
.......................................................
.......................................................
.....................
1147c 8989 Looper (back) Set Serew for 54061
8985 Belt Guard Hinge Pin Set Screw for 54357
1192c
1192c
8985
8904 Cloth Plate 'I'liread Guard Screw
1235T)
8911
12,50c
“ “ Set Screw for 54356...................................
.......................
I“r<‘sser Bai- Lifter Stoj) Screw
.......................
1253c 8958 Slack 'rlu'cad Regulator Holder Shaft
12.53c 8958
Crank Set Screw for ,54044
4'eiision (up]]er thread, automatic,) Cam
...........................
Set Screw for 46383.......................................
I25Sc 8901
-\rm Rotary Sliaft (.'ollar Set Serew for
51008..............................................................
12h1i> 8991
1123.1
1149i)
Oil Cup Regulating Screw for 511St)
8991
“ “ Screw for 1 17~'J4 M;u‘liinc..
Tliread (upper) 'Fake-up Plate Spring
8993
....................
Screw for 51096.............................................
8958 Needle Set Sinew for 51064
1498k
8992 'I'cn-sion (u))j)cr thread, automatic) Body
1508.1
Nut for 117-24 Machine
8904 Crank Connecting Rod Ball Screw Stud
1516k
1520k S991
N lit
...............
:...............................................
Needle Bar Connecting Link Hinge Stud
..............................
........................
Nut..................................................................
,8992
1539.I
Pres.sure Regulating Thumb Serew Lock
Niil.................................................................
8992
1547j
Tension (uiiper thread) Releasing Shaft
Sto{) Screw Nut.............................................
8992
1560c
1872
Tension (niiper thread, automatie) Regu
lating 'Fluimb Nut for .53213
Pre.s.ser Bar Lifter Roller and Stud for
8985
........................
61047..............................................................
Pre.sser Bar Cuide Bracket Roller and Stud
8985
1963
for 5403t)........................................................
2026
Oil Cup Regulating Serew Spring for 54189
8991
...................
...................
................
t . . .
NO.
2102
2102
2102
2117
2763
2766
2707
2770 8980
4822
4879
4882
5604
6055 8990
6335 8980
0336
tKi37
0439
0,575
7071 8904
7125 8080
8908 8911
9370 8952
11173
12242
15196
17.547
17547
19221
21506
♦2.3729
23767 8980
24292
25303 8990
26026
NUMERICAL LIST OF PARTS
PLATE
Tension (under thread) Disc
8964
8964
for 117-24 Machine
Tension (upper thread) Disc
8964
Ann Rock Shaft Crank (front) Pin
8901
Rock Shaft for 23767..........................................
8980
8980
“ “ Knee Ann Hub with 350c, for
NAME
...............................
“ (upper tliread, automatic) Disc
........................................
...............................
6336................................................................
Rock Shaft Knee Plate with 356c, for 6336
8980-
“ “ Stop Dog with 356c, for 23767
Wrench for 1547 (Accessories)
8941
Chain Connecting Link.......................................
8911
Treadle Shaft for 126252
8941
Bench Stand Slide Spring Pin for 79611..
8952
.......
Machine Base Bolt Nut Washer for 54358
Rock Shaft Knee Arm for 6336
—
Rock Shaft Knee Arm complete for 23767,
Nos. 2766, 2767 and 6335
Rock Shaft Lifting Bracket with two 3.56c,
8980
—
for 23767
Chain, 36 in. to 45 in., with 56864 and
........................................................
56865..............................................................
Crank Connecting Rod Oil Pad Stop Pin
8904
for 54017.........................................................
Feed Eccentric Clamping Washer for
54025..............................................................
Rock Shaft Lifting Bracket Hook for
23767..............................................................
Wrench for 1520 (.Accessories)
Bench Stand Slide Spring for 79611
Presser Bar Guide Bracket Guide
8985
Rock Shaft Hanger with two wood screws
8980
8902
Ann Side Cover (back)
8964
8964
Tension (under thread) Thread Guide... .
“ (u])per thread) Thread Guide for
147-26 Machine
1 in. No. 10, for 23767
8941
Wrench for 1516 (.Accessories)
Feed Connecting Rod Hinge Pin Collar
8904
with 457o, for 54077
...................................
.......................................
.............................................
......................................
Feed jiccentric Body for 54025
Rock Shaft complete. Nos. 2763, 2770,
6336, 6337, 7125 and two 12242
8990
Slack I'hread Regulator Holder Shaft
Collar with 1019c
...........................................
Presser Bar Ball, size )4 in., for 64330....
Screw Driver, large (.Accessories)
8941
35
......................
..........................
...........................
..........................
..............................
.........................
..................
.......................
.........................
..........................
...................
.....................
NM'Miï-RICAL LIST OF I’ARTS
NlTMliRICAR LIST OF PARTS
37
PLATE
NO.
891 1
20270
8941
20485
8985
‘27317
8990
27739
8901
29599
32572 8901
3'2572 8904
37503
38100 8991
38210 8993
38211 8993
38419 891M
38-150
38-150
8901
8991
8991
38119
:ì8-I08 8990
38475 8995
384 SI 899-1
899 l
38181
38I.S-2
8993
.8911
3S487
40320
8990
■11.538
l'230ri 8901
8993
40009
-lOOll
40075
10105
101 1 1
101 15
8993
sotti
8989
,8911
8989
10118 8991
8991
101 19
10120
8991
8991
10121
NAM 10
IVcAscr Foot, lliiiKC I’in for ,1()29!> and
,|ti:i03
Screw Driver, smiill (Accessories).................
Hell (lu:iril lliiifie Fin for 54358
Arm Oil 'I'ulie Fack ng (felU for 50003 . .
Te nsion (upper t Inead, aulonialic) Heleas-
Tension (upper llir('ad) Releasing Disc
Cliain, lenglii 15 in., with 50804 and 50805
04 (’up Racking (filO for 54189
4'hreail (under) Ni))|ier Sluing (lower). . .
Cloth FlaleSlidi' (left) Spring for 54013
Needle, Har Hushing (lowia )
Fressci- Har Hiisliing (uppei')
Thread (under) Take-up with 405c, for
Thi-ead (unilerl 'rake-up Staple Thread
'I'liread (under) 'I'ake-up Staple 'I'liread
'I’liread (underl 'I'a ke-up SI ripper
'I’hi'eading M'ii'C ( .Vccessories) .................
- -
Thread (uppei') Fyelel........................................
Throat Fiale Thread Retainer for 40401)
Face Fiale Fin
.Needle ('lamp Hody for 10122
...............................................................
'I'lireacl Umviniler 'I'hieail Com^ (wood)
(or largì' cones, foi' 225378 and 225398
ing Disc for 147-21 Machine
“ “ " ‘‘ (upper)
" “ “ (rigid ) Spi'ing for 54050,
54298 and 54300
“ “ Spring St 11(1
1 17-20 Machine.............................................
I iliard for 54 135
( liiard (right ) for 5 134 1
Hooper Di'iviiig Shaft and Feed Rifling
F.cceniric (lil Fad (liraided cotton). . , ,
Hench Stand Flush Holt with Fiale com
plete lor 79011, Nos. 120217, 120218
and four brass wood screws ",s in. No. 4
.\rm Oil Fad (lu-aided cotton) for oiling
.\rm Rock Shaft Front Hearing....................
“ (under) 'I’ake-up Staple Spi'ing ..
I .ooper ( front I N eel I le ( liiard Fin for 10377
I.ooper Thread (¡iiard (doublé) foi- 54370
“ " ('oliar with 1012(1 and Ihree
157i', for 40122
.Needle Clamp Thread ( ¡iiard foi' 40119 ..
.............................................
...........................................
.....................................................
.............................................
Washer for 10r22
...................
.......................
.....................
..........................
.......................
.................................
.........................
...............
.......................
...................
NO. I’l.ATE NAME
40122
---------
Needle Clamp complete for 54238, Nos.
40118, 40119 and 40121
.................................
10120 0501 Pre.s.ser Foot (right guide) with 337i) and
40127, for 147S24 Machine
...........................
40127 0501 J’res.ser H’oot Guide (right) for 40120... . .
40173 (1501 “ “ (left guide) with 337n and
10174, for 117-‘24 Machine
..........................
■10174 0501 Presser Foot Guide (left) for 40173.........................
40220 8980 Halance Wheel, 2J| in. pulley, with two
430c, for 147-24 Machine...............................
40247 8993 Thread (under) Nipper Spring (upper)
Stop.................................................................
40290 0501 Pressi'r Fool Guide (left) for 40299.........................
40-297
40298
-------------
-------------
“ “ Plate for 40‘299
“ “ Shank for 40-299
...........................
.........................
•10299 0501 Presser Foot (side hinged) with left guide,
eoiiiplete, for 147-24 Machine, Nos.
337i), 005n, 20270 and 40290 to 40298..
40300 0501 I’re.s.ser Foot Guide (right) for 40303 .. . .
10301
■10302
-----
“ “ Plate for 40303
------
“ “ Shank for 40303 . . . .......................
............................
40303 0501 Presser Foot (side hinged) with right
guide, comfdete, for 147-24 Machine,
Nos. 337n, 005i), 20270 and 403()() to
-10302
.............................................................
40373 0500 Feed Dog, 18 teeth (10 teeth to the inch)
for„b in. to in., in. to a’ï in. and aV
in. to li’t in. gauges, for 147-24 Machine
40374 0500 Feed Dog, 18 teeth (10 tci'tli to the inch)
foi';,b ill. to in., J.'i in. to 3§ in. and j'j
in. to in. gauges, for 147-24 Machine
4(>377 8989 fa)o|)cr (front) Needle Guard with 40105,
for 54372.........................................................
40383 8992 Tension (upper thread, automatic) Cain
with two 1253c, for 54192
.............................
10385 8Î192 Tension (upper thread, aut.omatic) Screw
Stud Releasing Fin for 117-24 Machine
40387 8992 Tension (upper thread, automatic) Spring
for 1 17-21 Machine
......................................
40391 0500 Throat Plate with two each 005i) and
40390, for 40373, for 147-24 Machine.,
40;>95 0500 Throat Flale with (wo each 005i) and
10390, for 40374, for 147-24 Machine , .
Ili390 0500 'I’liroat Plate Thread Retainer for 40394,
40395 ami 53198.............................................
38
numI':rical lis'I' of parts
NUMERICAL LIST OF PAR'PS
39
J’LATE
NO.
6560
46159
6560
46160
8904
49013
8904
49013
49092 8990
8996
49123
8901
50069c
50083c 8901
50nsto 8901
SOlOOc 8999
50150i; 8958
5032lic 8061
5032f)(- 89(11
50129c 8901
50173 c 8901
51001c 8958
51072e 8995
51570i: 8901
51570c 8961
51581E 8995
52015 8901
52(115 8901
53197 8988
53198 8988
53213 ---------
53225 8993
NAME
Feed Под, 18 teeth (16 teeth to the inch)
for :,'ü in. to in., ps in. to ¡-2 in. illld 22
in. to in. gange.s, for 147-21 Machine
'Phroat Plate with two each ()05d and
40075, for 46459, f(n- 117-24 Machiiuc . .
Ann Rotary Shaft Fionf Bearing Oil Pad
(braided cotton)..............................................
1д)0)1сг Carrier Connection Shaft Oil Pad
(braided cotton)..............................................
Oil 'Pube Packing (felt) for 54110......................
Machine Base Oil Pipe for 54358
......................
Crank Connecting Rod Ball Screw Stud
for 51088
........................................................
Ann Rock Shaft Crank (liack) Set Screw
for 54005 and 54184
......................................
Ann Rotary Shaft Bushing (interinediatiO
Set Screw (short)
............................................
'Pension (ii|)per thread, automatic) Screw
Stud for 53213................................................
Slack 'Phread Regulator Set Screw for
51012..............................................................
'Pension (uiuler thread) Screw Stud for
59539..............................................................
Tension (upper thread) Screw Stud for
59539..............................................................
Feed Dog Stop Sennv for 51019
........................
Cloth Plate Screw (right)....................................
Feed Fecentric Body Set Screw for 54025
Machine Base Bolt with 51581e, for 54358
'Pension (under thread) Régulai ing 'Phuinb
Nut for 59539.................................................
'Pension (up|ier thread) Régulât ing 'Phumb
Nut for 59539.................................................
Machine Ba.se Bolt Nut for 51072e
..................
Ann Rock Shaft Bushing t.lil Pad (liraidcd
cotton)
............................................................
Ann Rock Shaft Flanged Bushing (front )
Oil Pad (braided cotton)
.................................
Feed Dog, 18 teeth (16 teeth to the inch)
for зР in. to Д 'I'-i 32 in. toJ.j in. and 32
to ¿V in. gauges, for 147-21 Machine, . .
'Phroat Plate with two each l)65i) and
46396, for 53197, foj- 147-24 Machine. .
'Pension (upper tliiead, aulonialic) Screw
Stud 50106c with 1560c, for 147-24
Machine..........................................................
'Phread (under) Eyelet (back)
.............................
PLATE
NO.
*51001 —
51002
51001
8902
8i)01
54005 8901
54006 8987
51009
8902
8!)01
8902
54007
54008
51010 8t)01
51012 8902
54013
54017
*51018
54019
8902
—
8902
51020 8902
54023
8911
*51024
—
51025 8985
54026
8905
51027 8‘)89
*54032
---
*51034 8905
8991
54038
54039 8985
54010 8905
54042
8990
NAME
Arm, upper and lower (solid) with 948d
and 54034, for 147-26 Machine
Ann Rock Shaft for 54079
“ “ “ Collar with two 453c, for
54079 and 54192
............................................
.....................
..................................
Arm Rock Shaft Crank (back) with two
50083c, for 54079................................................................
Ann Rotary Shaft for 54384 and 54448...
“ “ “ Bushing (intermediate)
for 54089.........................................................
Arm Rotary Shaft Collar with two 1258c,
for 51384 and 54448
.......................................
Arm Rotary Shaft Flanged Bushing for
54090....................................................'
Arm Side Cover (front).......................................
Cloth Plate Slide (left) for 54013........................
Cloth Plate Slide (left) complete for
51200, 54301 and 54302, Nos. 38419,
54012 and two 725j
........................................
Crank Connecting Rod with 6575, 54018,
54218, 54897, 57222 and two each 896b
and 1057e, for 54088.......................................
Crank Connecting Rod Cap (upper) for
51017
.............■...............................................
Feed Bar with 50429c and two 453c, for
54077
..............................................................
I'Ted Bar Connection for 54077
“ Connecting Rod Hinge Pin for 54077
“ Eccentric for 54025
.........................
.......................................
Fowl Ecceulric (adjustable) comitlete for
54113, Nos. 217d, 1103c, 7071, 23729,
54024 and two 51061c....................................
Feed Rocking Frame with two 453c, for
54077
..............................................................
Looiier Carrier with two 171d, for 54383
and 54447
-
Loojier Carrier Driver Cap for 54230
“ Driving Shaft and Feed Lifting
.......................................................
................
Ecccniric Bracket with 761b, for 54001
and 54182 ..................................................
Needle (Inard Holder
..........................................
Presser Bar Cuide Bracket with 453c, 640j
and 1963
.........................................................
Pre.sser Bar Spring (flat).....................................
Slack Thread Regulator Holder with 175b
and 5Ü150C....................................................
..........
.
. .
•И)
NUMKUKbM. LIST OF PARIES
NUMERICAL LIST OF PARTS
41
NO.
FLATI'
.54013
8;)90
.54044 8990
.51017 8961
,54048
8964
51019 890,5
,5U)5.5
8986
.
540,56
51061
8990
54062
5 1061
.8991
8991
54065
51070 8996
8992
.54071
54072
S9')3
,54077
,54079
.510,50 8990
5 toss
,51089
54090
51091
89¡)3
51095
N1)93
„lOlHi
51103 .8905
54101
51105
,8913
8901
51 IOS
54109
.54110
,8990
N A M
Slack Thread !i(‘gulator llohli'rShaft
‘‘ “ “ “ “ Crank
(forkt'd) with 125:ir
T(“iisU)n (upper tliread) Releasing Shaft
(hank with (>‘2lc
Tensiun (uj)per tlirtaid) R(*leasin^ Shaft.
(hank liink.........................................................
'riinaul (under) 'Pake-ip) Staple Bracket
wit h -U)Or........................................................
(Moth Plate Slide (right; for hlOoh
(Moth Plate Slide [right' complete for
ÓTJOO, \os. TS119, olOoo and two 7’2oJ
Looper Hohler with 1 I20<’ and 1147c. . . .
N(‘(‘die Bar complete for 147-'2(> MacMiiiu',
\os. otOtit, 5Ut(ih ;iinl titiiPJ
Needle ( Mamp with t wo 1 litSip for 5 1002, .
" MMu-('ad (liiai'd forr)40t>2 ..
M'ensioii (u])jK'i’t lii'(‘ad i Bi actkid for 147-20
Marlline.............................................................
M'ension (upp(*r tluead) Releasing Shaft
for 147-20 Ma(4iiiu‘
MMireail (under) I\vel(4 (fi’ont)
Id'cd liocking Frame .14020 with 21.100,
llOPt, 11020, 14022, :md 17221
Arm lío(4í Shaft 14002 with 14001, 14005
and 01211, foi' 147-20 Machine
Loopin' lli'iving Shaft ami Fecal Lifting
I')cc(‘iitric Bracket Bushing
( hank (‘onnect ing Rod 14017 wit h lOOOOig
for 1 llSl and 144 IS ......................................
Ann Uolary Shaft Busiiing (inteniHHl’alií)
14007 with OllOS and OlSOl.......................
Arm liolary Shaft kMangc'd Bushing llOOi)
wit h ISOM!) and 0 ISOI
MMinaid (upper) M'ake-up for 14000
MMiread (uppi'r) M'ak(“-u|) c‘omplet<‘, Nos.
1 MOo, 11004, 11001 and 11710 .
f'icssn- liai- /.ini]!"' /jc\'cr Kxlciisiun...........
('lol li I Mat (‘ 'I'liivad ( uiaid
Ann Hock .Shaft I'laii^id Biisliiii};- (front)
Oil 'I'liho for .Mil 1(1
“ lirarkot for .■|lll().................................
Oil 'ruhc coniplct(', fill' oiliiifj; rrank coii-
iH'ctiiiu; roil (upix'r lirarinji;l No.s. 49()'.)2,
.A! ION and .Mill);)
.......................................
................'..........................
.....................................
..............................
Platti for 14000
........................................
.......................................
............
................
......................
....................
................
.................
........................
..........
, . .
.........................
NO.
.51111
■54112
54113
‘,54182
51183
54181
.54188
54189
,54192
,51199
51200
54'201
.54205
51206
,51216
54218
.54227
51228
51229
,51230
54238
.51239
54241
54242
5 1243
Pl.ATE
Feed Connecting Rod with 1057e, 54112
8902
and two 89Ge, for 54113
—
Feed Conneeting Rod Cap for 54111..................
NAME
............... ................
“ “ “ 54111 with 54025,
—
for 51384 and 54448
Arm, upper and lower (solid) with 948n
.......................................
and .51034, for 147-24 Machine.....................
Arm Roek Shaft for 54192..................................
8987
898,5
8991
“ “ “ Crank (hack) with two
,50083<t, for 54192
Oil Cup for 54189
........................................
..............................................
Oil Cup complete, for oiling up|>er thread,
for 147-24 Machine, Nos. 1284n, 202G,
38100 and 54188.............................................
—
Arm liock Shaft .51183 will) 4t>383, 54004,
54181 and (i 125.5, for 147-24 Machine. .
Cloth Plate for ,54200
8987
........................................
Cloth Plate complete for 147-26 Machine,
Nos. 51013, 54056 and 54199
Thread Lubricating Oil Cnp for 54206. . .
8992
8992
“ ‘‘ “ “ Thread Guide
for ,54206........................................................
—
M'hread Lubricating Oil Cnp coinidete for
117-26 Machiiup Nos. 217,i, 54204, 5420,5
and 57629........................................................
M'ension (u|)|)cr thread, nntomntio) Body
8992
for 1 17-24 Mncliine.......................................
Crank Connecting Rod Oil Pad (braided
8901
8989
89.89
89S9
89,89
cotlim) for 51017
............................................
Looi>er Caniiu' Conneclion for 54383 and
,51117
.............................................................
LooiHT ( kuTicr Connection Shaft for 5438:i
and .51117
......................................................
Looper Cai'i'iiT Conncetion Shaft liushing
“ “ 1,liver with,540ii2 and four
17,5i'i, for 54383 and 54447...........................
—
Nei'dle, liar com|ilete for 147-24 Machine,
Nos. 46122 and 64319....................................
Needle l.luard, for gauges in. to 35 in.
,899.5
between the second and third needles,
for 147-24 Machine
Slack I'hread Controller for 147-24 Ma
8990
........................................
chine ...............................................................
Slack 'riiread Controller Clamp
8990
8990
“ “ Regulator for 147-24 Ma-
cliim;...............................................................
........................
..........................
42
PLATI-:
NO.
8992
54244
542-15 8996
8992
5-1246
54296 8987
5-1297
8986
54298
54299
8986
54300
54301
—
54302
—
.54319
8988
54320 8995
—
5 4321
51322
8994
54323 899-4
54324
8988^
54325 8985'
51326 8991
,54327 8991
54328
8991
—
54329
54331
8993
5-1332
8993
8992
54333
54335 8995
NUMKIUCAL rJHT OF PARTS
NAME
TeiiKioii (up|)er tlireiid, aiitoinalic) Thread
(hiide for 147-2 t Machine
.............................
Timsion (upper thread) liracket for 1-17-24
Macliine
.........................................................
Tension (upi)er thread) Releasing Shaft
for 147-24 MaehiiK!
......................................
Cloth Plate for 54301 and 54302........................
“ “ Slide (right) for 54298
......................
Cloth Plate Slide (right) complete for
51301, Nos. 38419, 54297 and two 725j
Cloth Plate Slide (right) for 54300
.....................
Cloth Plate Slide (right) complete for
54302, Nos. 38419, 54299 and two 725j
Cloth Plate complete, for j'-r in. to in.,
A- in. to si in. JindaV ill. to -A- in. gauges,
for 1-17-24 MachiiK!, Nos. 54013, 54296
and 54298
.......................................................
Cloth Plate coiniilcte, for jV in. to A in.,
8 in. to in. and S2 in. to A in. gauges,
for 147-24 Machine, Nos. 54013, 54296
and 54300.......................................................
Ffied Dog, 17 teeth (16 teeth to the inch)
for 147-26 Machine
Needh; (iuard for 147-26 Machine
........................................
.....................
Pres.ser Foot for 54323.......................................
“ “ Spring Cuide for 54323
.................
Presser I'’oot complete for 147-26 Machine,
Nos. 72.5.1, ,5-1321 and ,51322
....................
Throat Plate for 54319, for 1-16-26 Machine
Pre.sser Bar Bushing (lower) for 147-21
Machine
.........................................................
Needle Bar Connecting Link for 51329...
“ “ “ “ Hinge Stud
for 51329
........................................................
Needle B.-ir Connecting Stud with 211e
and two 187e, for 5-1329
...............................
Needle Bar (Connecting Link 54326 with
,51327 and 54328
...........................................
Thread (iipi)er) Controller for 1-17-26 Ma
chine ..............................................................
Thread (upper) Controller for 147-24 Ma
chine
...............................................................
Tension (upper thread, automatic) Bod}'
Releasing Pin for 1-17-24 Machine
...............
Needle Guard, for gauges in. to 14 in-
hetween tin; second and third needles,
for 147-24 Machine
........................................
PLATE
NO.
8995
54336
8994
54339
54340
54341
8994
8993
,5-4342 8993
54356
54357
8980
8980
54358
8985
54367
8994
54368
8989
54370
,54371
8989
54372
54381
8994
54383
5-4384
—
54435
8994
54440 8990
54441 8995
54447
—
54448
NUMERICAL LIST OF PARTS
name
Needle Guard, for gauges Vg in. to in.
between the second and third needles,
for 147-24 Machine
........................................
Looper (back) closed eye, for 147-26 Ma
chine................................................................
Looper (front) closed eye, for 147-26 Ma
chine ...............................................................
Thread (under) Take-up Staple with
38481, 54342 and two 590n............................
Thread (under) Take-up Staple Thread
Guard (left) for 54341
Belt Guard with 1192c, for 54358
Machine Base with 1192c, for 54358
.....................................
......................
.................
Machine Base with Belt Guard complete.
Nos. 27347, 49123, 54356, 54357, 60884,
three each 6055, 51072e and four each
948e and 57285
Arm Rotary Shaft Bushing (front)
...............................................
......................
Looper Driving .Shaft and Feed Lifting
Eccentric w'ith 227n and two 64315, for
54383
..............................................................
I,oo|)er (back) with 590n and 46115, for
147-24 Machine
Looper (front) for 54372
..............................................
.....................................
“ “ 54371 with 46377 and two
229n, for 147-24 Machine
...............................
Slack Thread Controller for 147-26 Ma
chine
.................................................-.............
LooiHir Driving Shaft and Feed Lifting
Eccientric 54368 with 54027, 54227,
54228 and 54230, for 54384
...........................
Arm Rotary Shaft 54006 with 640n, 54008,
54088, 5-1113, 54383, 64351 and 64355,
for 147-26 Machine
........................................
3'hread (upiier) 3'ake-up Staple with 590n
and 38481, for 1-47-26 Machine.....................
Looper Driving Shaft and Feed Lifting
Eccentric with 227n and two 64315, for
,54447
.............................................................
3'hread (under) Take-up with 465c, for
1-17-24 Machine.............................................
Loojier Driving Shaft and Feed Lifting
Eccentric 54440 with 54027, 54227,
54228 and 54230, for .54448
..........................
Arm Rotary Shaft 54006 with 640n, 54008,
54088, 54113, 54447, 64351 and 64355,
for 147-24 Machine
.........................................
43
'
и
NU.MKRICAL US'r OK PARTS
NUMlfRICAIi IJST OF PARTS
45
NO. PL ЛТК
54 710 899.3
54897 8901
54988
8901
51990 890 1
50003 8985
50000 8901
5080 1
TifiSlif)
894 1
8985
57070 890 1
»57222
57225
8901
57234 8911
57235
Г) 7 2.3 7
57258
SDS")
891 1
8911
57285 8990
57029
58039
5953 1
8992
8902
890 1
59.535 890 1
8901
59537
59537 8901
59538 890 1
59538
8901
59539
59539
—
8952
00050
008S4 8985
01017 8911
01075
8911
04255 8911
NAMK
Ttii'cud (upiKTl 'rak('-u|i Plate Spi-iug for
AlODt)............................................................
Crank ('oniieci ing Kod Oil (aip for 54017
Tension (upper (hrea<l) Releasing Pin ■. .
Sliafl,
Sprinti
............................................................
Arm Oil 'Pnl>(‘ with 20599, for (jiling 54320
“ “ Pad (liraided cotton) for oiling
Aj-in Rock iSluift Tnti'rnu'diale Hearing
Clniin Hook (kirge) for 0439 ami 37503. .
“ “ (siuall) for 0439 and 37503 .
Tension (u])per llii’mul) Thread Guide
Idoulile) for 147-24 Machine
.........................
Cisudi Connecting Rod Cii|> (lower) for
54017..............................................................
Feed H;ir Hinge Pin for 54077
...........................
Roctking Fniine Hinge Pin.......................
“ “ “ “ “ Hushing
Presser Har Lifter
“ “ “ Hinge Pin
Machine Cushion (felt) for 5135S
...............................................
..............................
.........
...........
'riiread Liihrioiling Oil Cup Pad (felt)
for 54200 .......................................................
Alin Rotary Sliaft Flanged Hushing Oil
Pad, long (braided eolloni for 540iK) ..
'I'ension (under thread) Spring
...........................
" (upper thread) S|»-ing................................
(under thread) Spiing Hushing
(large).............................................................
Tension (upper thi-ead) Spring Hushing
(lai-gel
......................................................... .
'rension (under thread) Spring Hushing
(sinalli............................................................
'rension (up)H'r thread) Spring Hushing
(siiiidl)
...........................................................
'I'ension (under t hread) Screw Stud 50320i:
with 51570e....................................................
'I'ension (upper thread) Screw St ud 50320c
with 51570c ...................................................
Henidi Stand Hinge for 79011
..........................
Mai hine Hase Oil Pifie Plug for 5435S. . .
Pres.ser Har Lifting Hracket with 400c and
1S72...............................................................
Presser Har Lifting Lever Connecting Stud
Ann Rock Shaft Crank (front ) with 453c,
for 54079 and 54192
......................................
NO. PI..VriO NAMK
01259 8913 Hidance Wheel with two 430c, for 147-20
Maidiine
.........................................................
0120S 8901 Crank Connecting Rod Hall Screw Stud
WashiT
...........................................................
04209 8913 Face Piale................................................................
04315 8990 Loo|)er Driving Shaft and Feed Lifting
Fceentric Oil Hole Plug for 54308 and
54440
.............................................................
04319 8991 Needle Har (hollow) for 54002 and 54238
01320 8991 “ “ Hushing (uit])er)
04330 8980 Presser Har with 25303
..............................
...........................................
04331 891 1 “ “ Hushing (lower) for 147-20
Machine
..........................................................
04337 8995 Slack 'I'hread Regulator for 147-26 Ma
chine ...............................................................
04351 8994 'Phread (under) Nipper Cam with 405c,
for 54384 and 54448
.......................................
04355 8991 'I'hread (under) 'Pake-up 'Phread Guard
(brass) for 54384 and 54448
...........................
01350 8993 'Phread (under) 'Pake-up 'Phread Guard
Steady Pill
.......................................................
01302 8990 l^resser Har Lift ing L('ver......................................
04380 8901 Ann Rock Shaft Hushing (back)
.................................
01388 8901 “ “ “ “ (intermediate)
01508 8902 “ Rotary Shaft Hushing (intermediate)
Oil Pad, long (braided cotton) for 54089
01805 8985 Aim Hoi ary Shaft Hushing (intermediate)
Oil Pad, short (braided cotton) for
54089 ..............................................................
01805 8985 Arm Rotary Sliaft Flanged Hushing Oil
Pad, short (braided cotton) for 54090
79011
------
Heneh Stand with 5004, 9370, two 41538,
three wood screws 1)4 in. No. 14, four
00050 and sixteen wood screws in.
No. 7
.........................................................
]20:!4l 8941 'Pweezers, curved (Accessories)
.............................
..
120344 8911 Oiler (copiier jilated) with 120345 (Acces
sories) .............................................................
120345 8941 Oiler Spoul, 5 ¡u. long, for 120344
.........................
120247 8952 Heiieh Stand h'lush Holt for 41538 ............................
120248 8952 “ “ “ “ Plate for 41538. .
Nos. 126249 TO 120251 Fon 126252
126219 8980 'Picadle
....................................................................
126250 8941 “ Spring...................................................
126251 8980 “ Stand
...................................................
46
NO. I’LATE NAME
NUMERICAL LIST OF FARTS
126252 8980 Tieadl(‘ complete, No.s. 4882, 126249 to
126251 and two wood screws 1 in. No. l(i
200383c 8985 Tliread Unwinder Spool Rest Rod Set
S(o-ew for 202490..........................................
201018c 8985 Tliread Unwinder Spool Rest Set Screw
for 225395
......................................................
201096,1 8995 Tliread Unwinder Thread Guide Lock
Nut for 225378 and 225398
...........................
202490 8953 Thread Unwinder Spool Stand with
200383c, for 225378 and 225398...................
225378 8997 Thread Unwinder complete, for six spools,
for 147-24 Machine, Nos. 201696J,
202490, 225388, 225392, three 225395,
six 225391 and three wood screws Jg in.
No. 12.............................................................
225388 8953 Thread Unwinder Spool Rest Rod for
225378 and 225398
........................................
225390 8996 Thread Unwinder Thread Cone Holder,
for inverl ed cones, for 225378 and
2253<)8
..........................................................
225391 8953 Thread UnwinderThreadGuidefor225378
and 225398 ....................................................
225392 8953 Tliread Unwinder Thread Guide Rod with
225393 8995 Thread Unwinder Thread Guide Rod
208e ami 225393, for 225378 and 225398
Washer for 225392.........................................
225395 '8953 Thread Unwinder Spool Rest (for two
spools) with 201018c, for 225378 and
225398............................................................
22,5398 8953 Thread Unwinder complete, for four
sjKiols, for 147-26 Machine, Nos.
201()96,i, 202490, 225388, 225392, two
225395, four 225391 and three wood
screws Lg in. No. 12
......................................
PLATE 6560-FTJLL SIZE
PLATE 6661-PULL SIZE
PLATE 8901-FULL SIZE
56006 IIII9 29599 446
PLATE 8902-ONE-HALF SIZE
PLATE 8904-FULL SIZE
54002
54 007
ii
% \
L->' !
1
1
1
/'“3 '
. #4:
54009
0
, .-iYiv
4\\
,H -
49013
50473
50009 I5lb
2 fi6
54010
430
725 1235
64-268 896 1057
54897 572ZS 2150b 457
217
54in
443 7071
61171 1103
■ C
21332
934
I
■
PLATE 8906-ONE-HALF SIZE
PLATE 8911-FULL SIZE
64255
64331 54023 57234
PLATE 8913-
-ONE-HALF SIZE
PLATE 8941 T-ONE-HAtF SIZE
54014
b 4 2 b 9
I92гl
8908 120344 26485 36467
PLATE 8952-FUXL SIZE
PLATE 8953-ONE-SIXTH SIZE
9370 1^6247
b0h5b
225395
225391
225392
225398
225391
225395
202490
225388
PLATE
8958
-FULL
SIZE
PLATE 8964-FULL SIZE
316 447
I'
1498 465
SUB
«58
50571
376
1036
1
50378 161
171 175 187 227 211
5)061 1120 50200 1253 657
S
1019
e .
446 1259
i
462
tm Im
176 704
50150
AM
6
190
1133 i
.1^9 f
624 '
§ '
i
2102
51570 54-988
Q
54990
59535 59534 59536 59537
nr If
17547
54048
948 64-0 391 218 Y t
54046
229 590
PLATE 8980-0NE-F0EETH SIZE
PLATE 8985-FULL SIZE
126249,
12625)
I2625£
54357
56003 35fo 60884 1192 1872. 1963
b337 2763
6335
■- J
PLATE 8986-ONE-HALF SIZE
PLATE 8987-ONE.FOTJETH SIZE
54055
^ ^4'. A I A
V* '
^ V-*’* ' ' '
V- ^ ’ ;
‘ / V'" ^ /
‘i,'. * 't} ■’j' ''’ A 4
\ • • ,f-.i. t; <-
54297
54299
64330
54296
54006
54183
54199
PLATE 8988-FULL SIZE
PLATE 8989-FULL SIZE
53197
54-324-
53196
•«' I ,‘A 't . ' •
r; V';’-'"-.
54370
54371
54319
PLATE 8990-FULL SIZE
PLATE 8991-FULL SIZE
54080 54044 54^42, 24292 (>4315
^s5C3B5, y
G43I9 1423 2(9 54-065 54038
PLATE 8992-FULL SIZE
543.46 54071
54^04
PLATE”:8993-FULLV SIZE.?
^ V . •. ,y -
38^10 38;JH 36482 46247 53gg5
54094
965 54095 54342 54716 460.
‘ Z07
1449
5 8'^'
■'Mlk
PLATE 8994-FULL SIZE
54-339
54340
PLATE 8996-ONE-HALF SIZE
PLATE 8997--dNE.SIXTH' SIZE’
fc4-36E 5 4Z45 54070 49123
225390
2 773 9
225391
225392
ZZ537& •,
225391 V
225395
225395
225395
Loading...