Page 1
i'orin
18110
()ctobor.
192
FUlNTklU IN IJ a. A.
.J
LIST
OF
PARTS
MACHINES
Nos. 147-2 and 147-23
A TRADE MARK OF
THE SINGER MANUFACTURING COMPANY
Page 2
INSTRUCTIONS FOR OILING
To ensure easy running and prevent unnecessary wear
of the parts which are in movable contact, the machine
requires oiling and when in continuous use, "TYPE B"
or "TYPE D” OIL, sold only by Singer Sewing Machine
Company, should be applied at least twice each day to
all oil holes marked "OIL".
INDEX
"TYPE D” OIL is stainless.
Coi'YRiOHT, U. >S. A., 1922, 1924 and 1925
itY The Sin(jeh MANi’EAcnjiUNu Company
Ali, Rights Kesekved you aia, Coijntuies
Accessories
Beet Guard
Bench Stand ..
Edge Guide .
Foot Iheteh Parts
Iron Base . .
Knee Lifter Parts
Machine No. 147-2.
“ “ 147-2;?...
Numerical List of Parts......................
Thread Unwinder (for two spools)..
" “ (for four spools)
..........-......-....................
___
___
___ ___________
____ ___________
..............
__
_____
__
__________
.....
___
____
PAGE
.
_
.... 28
.... 29
.... 30
-. 29
... 29
.... 28
... 30
.. 7
.. 18
.... 30
.... 30
.... 31
Page 3
INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the PART number
in the FIRST column.
The number stamped on a Sewing Machine part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows:
A. Hardened, Polished and Plated.
B. Polished and Plated.
C. Hardened only.
D. Polished only.
E. Soft, not Polished.
F. Hardened and Polished.
G.
H. Blued.
J. Plated only.
K. Hardened and Plated.
L. Brass or Gilt.
M. Oxidized.
P. Japanned.
R. Parkerized.
T. Copper-plated.
These letters MUST BE USED when they appear in the list,
and AFTER the number as in the list.
In this series:
1 to 1500 and 50001 to 51500 are Screw Numbers.
1501 to 1800 are Nut Numbers.
1801 to 2000 are Roller Numbers.
2001 to 5001X) and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 147-2
FOR CLOTH OR LEATHER, STITCHING GLOVES, CLOSING
SHOES; ALSO FOR BINDING LIGHT AND MEDIUM FABRICS
OR LEATHER. ONE NEEDLE, ONE LOOPED, ALTER
NATING PRESSER. INDEPENDENT UPPER AND UNDER
FEED.
NO. I'l.ATU NAMK
*54180 ' .\rm, uj)per and lower (solid) with 948n
and 54034
423(H) 8901 .Arm Oil f’ad (braided cotton) for oiling
Arm Rock Shaft Front Bearing
56006 8901 .Arm Oil Pad (braided cotton) for oiling
Arm Rock Shaft Intermediate Bearing
11119 8901 .Arm Oil'I'libe with 29599, for oiling 64321
40217 8923 “ “ “ “ “ “ “ .54147
29599 8901 “ “ “ Packing (felt)
,54131 8925 “ Rock Shaft
64386 8901 “ “ “ Bushing (back).......................
446c 8901 “ “ “ “ “ Set Screw
64388 8901 “ “ “ “ (intermediate)
423c 8901 “ “ “
Set Screw
.......................................................
...................
...............................
....................................................
........................................................
Page 4
ARTS FOR MACHINE No. M7-2
PARl'S FOR MACHINE No. 147-2
I'L.ATE
NO.
52045 8901
54004
8901
8901
453c
8901
54005
8901
50083c
54132
8923
2117 8901
448c 8923
8901
,54105
52045 8901
8901
453c
54006 8903
54081 8901
8901
52045
761e
8901
8902
54007
—
54089
8902
64508
8901
42367
8901
422c
50084c 8901
54008 8901
1258c 8901
8902
54009
—
54090
8902
58039
8901
42367
8901
159e
8904
49013
144)!
8901
8902
15196
NAMH’.
Arm Rock Shaft Bushing Oil Pad (braided
cotton)............................................................
.Arm Rock Shaft Collar with two ■153c. . .
“ “ “ “ Slit Screw
“ “ “ Crank (hack) with two
500S3C...........................................................
.Ann Rock Shaft Crank (back) Set Screw.
“ “ “ “ (front) with llHc
and -153c........................................................
.Arm Rock Shaft Crank (front) Pin
................
“ “ “ “ “ S(;t Screw
“ “ “ Flanged IRishing (front)
Oil Pad (braided cotton)
..............................
.Ann Ro(tk Shaft J''langed Brushing (front)
Set Screw
.......................................................
•Arm Rotary Shaft............................................
“ “ “ Bushing (front)..............
“ “ “ “ “ Oil Pad
(braided cot ton)...........................................
.Arm Rotary Shaft liushing (front) Set
Screw..............................................................
.Arm Rotarj' Shaft Bushing (intenneiliale)
54007 with 42307 and 01508
........................
.Arm Rotary Shaft Bushing (intermediate)
Oil Pad, long (braided cotton)
.....................
Arm Rotary Shaft Bushing (intennerliale)
Oil I’ad, short (braidral cotton)
..................
.Arm Rotary Shaft Bushing (mtermediate)
Set Screw (long)
............................................
Arm Rotary Shaft Bushing (intermediate)
Set Screw (short)...........................................
.Ann Rotary Shaft Collar with two 12.58c.
“ “ “ “ Set Screw
“ “ “ Flanged Bushing
............
.................
“ “ “ “ “ 54009
with 42307 and 58039
...................................
Arm Rotary Shaft Flanged Bushing Oil
Pad, long (braided cotton)
...........................
.Arm Rolary Shaft h'laiiged Bushing Oil
Pad, short (braided cotton)..........................
Arm Rotary Shaft Flanged Bushing Screw
“ “ " k'nint Bearing Oil Pad
(braided cotton)
............................................
.'Ann Rotary Shaft Screw................................
“ Side Cover (back)
.......................................
................
NO. I't.ATE NAME
2801) 8904 Arm Side Cover (back) Thumb Screw. . .
5-4010 8904 “ “ “ (front)
...................................
2801) 8904 ‘‘ “ “ “ Thumb Screw. . .
51210 8924 Balance AAdieel, 2Vg in. inilley, with two
430c.................................................................
430c 8904 Balance AAdieel Set Screw.....................................
54011 8903 Cloth Plate..............................................................
lOllK 8904 “ “ Screw (left)
50473 E 8901 “ “ “ (right)
54012 8902 “ “ Slide (left)
54013
------
Cloth Plate Slide (left) complete, Nos.
.................
................
.................
38419, 54012 and two 725j............................
38419 8904 Cloth Plate Slide (left) Spring
725j 8904 “ “ “ “ “ Sfiii'w
54133 8925 “ “ “ (right)
54134
------
Cloth Plate Slide (right) eomiilete, Nos.
...........
....
................
38419, 54133, 54209 and four 725j . . . .
5'42()9 8923 Cloth Plate Slide (right) Position Spring
725j 8904
Screw..............................................................
38419 8904 Cloth Plate Slide (right) Spring
..........
725j 8904 “ “ “ “ “ Screw. . .
54135
------
Cloth Plate complete, Nos. 54011, 54013
and 54134........................................................
54136 8926 Cloth Plate Thread Guard
12351) 8904 “ “ “ “ Screw
....................................
.....................
54017 8902 Crank Connecting Rod with 6575, 54018,
54218, 54897, 57222 and two each 896b
and 1057e
.....................................................
50069c 8904 Crank Connecting Rod Ball Screw Stud
1516e 8904
Nut
..................................................................
64268 8904 Crank Connecting Rod Ball Screw Stud
AV'aslu'r........................................................
*57222 Crank Coimi’ctiug Rod Cap (lower)............
896e 8904 “ “ “ “ “ Screw
*54018 “ “ “ “ (upper)
...........
1057e 8904 “ “ “ “ “ Screw
54897 8904 “ “ “ Oil Cup
...................
54218 8904 “ “ “ “ Ead (braided
cotton).............................................................
6575 8904 Crank Connecting Rod Oil Pad Stop Pin
54137 8926 Face Plate
...............................................................
142i) 8923 “ “ Screw..................................................
54111 8902 Feed Connecting Rod with 1057e, 54112
and two 896e..................................................
*54112
---------
F’eed Connecting Rod Cap....................................
Page 5
IO VJ
Mri’S FOlì M.U’IIINI-: No. 147-2
PARTS FOR MACHINE No. 147-2
11
NO. I’I.\'1’K
8'.HÌe suoi
1057k S!)()t
5-1138 8923
21 »Oli 8901
457i- 8901
54139 8927
157j 8904
50429c 8901
*54024
*23729 - -
------
443(; 8904
7071 8904
217i) 8904
61171 8901
21332 8904
934j 8904
54025 8906
1103c 8904
5-1019 8902
54020 8902
57225 8901
453c 8901
54026 8905
54140 8925
57235 8906
453c 8901
453c 8901
51111 8928
54169 8928
14231) 8928
54142 8928
541-13 8928
14231) 8928
54144 8928
14231) 8928
5-1145 8928
NAME
l'VclI ('imiici-liiig lioil ('up Screw...................
“ “ “ ('lamping Screw..
“ “ “ Hinge Pin
......................
“ " “ “ “ Collar
with 457c.......................................................
Feed ('cmnecl ing Rod Hinge Pin Collar
Set Screw
Feed Dog, for glove work
.......................................................
.................................
“ “ Screw..................................................
“ “ Slop .Screw
“ Fa-centric
........................................
....................................................
“ “ Body...............................................
“ “ “ Set Sciew
“ " ('lamping Washer
........................
..................
“ “ “ “ .Screw .
“ Pressure Spring
...................
(.'ap.....
“ “ Screw
Feed Fccentric (ailjuslalile) complete,
Nos. 217ii, 931,1, llO.ic, 7071, 21332,
23729, 54021, 61171 and two 443c. . . .
l-'eed Regulating Screw
....................................
“ (lowerj liar with 50429c and two
453c.................................................................
Feed (lower) liar ('onnection............................
" “ " Hinge Pin..............................
“ “ “ “ “ Set ¡Screw. . .
“ “ Rocking Frame with two
453c
................................................................
Feed (lower) Rocking l-'ramc Hinge I’in
liushing..........................................................
l-'eed (lower) Rocking Frami- Hinge Pin
liu-shing Set ¡Screw......................................
Feed (lower) Rocking Frame Hinge Pin
Set Screw
l-'eeil (u[)per) liar, for glove work
.......................................................
...................
“ “ “ “ liimling and general
work
...............................................................
Feed (upper) liar Ca|) Screw............................
“ “ “ (.¡onnecting Bracket. . .
“ “ “ “ Link
.............
“ “ “ “ “ Cap
Screw..............................................................
Feed (upi)er) Bell (.’rank..................................
“ “ “ Cap Screw
................
“ “ “ “ Connecting Link
NO. PLATE NAME
1423n 8928 Feed (upper) Bell Crank Connecting Link
Cap Screw......................................................
54146 8928 Feed (upper) Bell Crank Connecting Stud
with 889c
........................................................
889c 8928 Feed (upper) Bell Crank Connecting Stud
Set Screw........................................................
54147 8928 Feed (upper) Connection
54148 8928 “ “ “ Pin
......................................
........................
4,53c 8901 “ “ “ “ Set Screw..
24479 8928 “ “ “ Slide Bar
.......................
50200c 8928 “ “ “ ““Set
Screw
..............................................................
1194c 8928 Feed (upper) Lifting Regulating Screw
1749c 89‘28
Nut
..................................................................
9525 8928 Feed (upper) Lifting Regulating Screw
Nut Washer....................................................
54149 8928 Feed (upper) Lifting Regulator with
50200c.............................................................
54150 8928 Feed (upper) Lifting Regulator Connect
ing Link
..........................................................
1423d 8928 Feed (upper) Lifting Regulator Connect
ing Link Cap Screw.......................................
50200c 8928 Feed (u|>per) Lifting Regulator Set Screw
54151 8929 “ “ “ “ Shaft
54152 8928
Crank with two 50200c
.................................
50200c 8928 Feed (upper) Lifting Regulator Shaft
Crank Set Screw............................................
50950c 8929 Feed (upper) ■ Regulating Screw Stud
51552c 8929 “ “ “ “ “
Nut..................................................................
39026 8929 Feed (upper) Regulating Screw Stud
Washer
...........................................................
54155 8925 (Feed upper) Rock Shaft.......................................
65537 8929 “ “ “ “ Collar with two
465c
.................................................................
465c 8909 Feed (upper) Rock Shaft Collar Set Screw
54156 8929 “ “ “ “ Crank (back)
with two 50200c
.............................................
50200c 8928 Feed (upper) Rock Shaft Crank (back)
Set Screw........................................................
62595 8929 Feed (tipper) Rock Shaft Crank (front)
with 1057e
......................................................
1057e 8904 l-'eed (upper) Rock Shaft Crank (front)
Clamping Screw.............................................
54157 8925 Feed (upper) Rock Shaft Pitman..........................
Page 6
12
PARTS FOR MACHINE No. 147-2
PARTS FOR MACHINE No. 147-2
13
NO. PLATE NAME
41f 8929 Feed (upper) Rock Shaft Pitman Hinge
Screw..............................................................
1520J 8907
8925
54153
8901
453c
54154 8929
8929
54158
Screw Nut
Feed (upper) Rocking Frame with two
463c
Feed (upper) Rocking Frame Set Screw. .
“ “ “ “ Slide Hlock
Feeding Foot Hinge Pin for 54101, 54172
......................................................
................................................................
and 54213.......................................................
—
54159
54170
54212
54160
54171
54161 8929
Feeding Foot Plate for 54101
—
—
—
—
“ “ “ “ 54172
“ “ “ “ 54213
“ “ Shank for 54101 and 54213
“ “ “ “ 54172
Feeding Foot (hinged) eomi)lete, for glove
work, Nos. 54158 to 54160
54172
Feeding Foot (hinged) complete, for land
8929
ing and general work. Nos. 54158,
54170 and 54171............................................
54213 8929
Feeding Foot (hinged) raised toe, com
plete, for glove work, Nos. 54158,
.54100 and 54212...........................................
203d
8929
57255 8908
25303 8907
01046
8908
“ Rail, size hi..
“ Bushing (lower).
1133e 8907
Screw.
54102
8929
1133e 8907
Screw............................
54039
8908
■ifting Prosser Bar Gi
453c, 040,1 and 1903.
64()j
8907
11173 8908
lifting Pre.sser BarGui
ing Screw
.....................
lifting I’resser Bar Gu
447c 8908
1963
8!)08
Set Screw
ifting Presser Bar Gu
.....................
and Stud.......................
453c 8901
541()3
1872
54164
8929
8908
8930
lifting Presser Bar G
.Screw
............
..............
Lifting Biacket with
lt)2c and 1872.
.........................
...........
...........
..........
...........................
Set
S e t
“ Roller and Stttd
PLATE
NO.
8925
54165
54197
54103
462c
8930
8930
8905
161n 8908
176d 8907
802d 8908
190d
54027
8905
8908
8930
8930
8930
8930
8908
8930
—
8906
54040
38468
54166
54173
54207
54214
46335
53131
17 If 8906
54028
5t)607j
89«)
8906
54029 8900
50008J
446c
8906
8906
8901
8904
8906
54030
49013
54031
*54032
39 Id . 890t)
54033
8907
»54034 8905
54080 8906
NAME
Lifting Presser Bar Lifting Lever
....................
“ “ “ “ “ Connect
ing Stud
Lifting Presser Bar Lifting Lever Con
necting Stud Set Screw
.................................
Lifting Presser Bar Lifting Lever Exten
sion .................................................................
Lifting Presser Bar Lifting Lever Exten
sion Screw (left)
.............................................
Lifting Presser Bar Lifting Lever Exten
sion Screw (right)...........................................
Lifting Presser Bar Lifting Lever Hinge
Screw...............................................................
Lifting Presser Bar Spring (flat)
“ “ “ “ Stud
......................
........................
“ “ Foot, for glove work....................
“ “ “ “ binding
.....................
“ “ “ (small needle hole)
for light glove or similar work
.....................
Lifting Pres.ser Foot (rai.sed toe) for glove
work................................................................
Lifting Presser Foot Screw
Looper with 590u and 38393
...............................
............................
“ 10335 with 229i) and 52661
“ Carrier with two 171f...............................
“ “ xkdjusting Screw
........................
“ “ Connection...................................
Oil Plug Screw
Shaft
Cap Screw
.........
Loo|icr Carrier Connection Shaft Bushing
Set Screw........................................................
laioper (airrier Connection Shaft Oil Pad
(braided cotton).............................................
Looper Carrier Driver with 54032 and
four 391i>
—
Loo[ier Carrier Driver C'ap.............................
“ “ “ “ Screw
.......................................................
..................
“ Driving Shaft and Feed Lifting
Eccentric with 227n and 64315
....................
Looper Driving Shaft and Feed Lifting
Eccentric Bracket with 761e.......................
I.ooiier Driving Shaft and Feed Lifting
Eccentric Bracket Bushing
...........................
................
.................
Bushing
Page 7
14
PARTS FOR MACHINE No. 147-2
NO. 1’Ь.ЛТ10 N .Л M К
76 1e 8901 I.ooper Driving Sliaft and Feed Lifting
Eccentric Bracket Busliing Sel Screw. .
948d
8906 Looper Driving Sliaft and Feed Lifting
Kccentric Jkackid Screw
.............................
64315 8907 I/Ooper Driving Shaft and Feed Lifting
Eccentric Oil Hole Plug................................
8907
227i)
40,326
Looper Driving Shaft and Feed Lifting
Ficcentric Oil Hole Screw
............................
8907 LoojKT Driving Shaft and Feed Lifling
Eccentric Oil Fad (braided codon).. .
6401) 8907 Loo[)er Driving Shaft and Feed Lifling
54035 8907
704,1 8907
521)61
4610,5
229i)
I.oopcr Holder with 1120c................................
“ ‘‘ Screw......................................................
.8930'
8930
8930
“ Nt'cdle Guard with 1610.5.......................
“ “ “ Pm........................................................
“ “ “ Sci(‘W
1120c 8907 “ Set Screw
Eccentric Screw
............................................
..................................................
...................................................
38393 8907 “ Thread Guard...........................................
,5901) 8907
892,3
5 1208
8i)07 “ “ Bushing (lower))
38156
8907
1133E
61320 8907
1133E 8907
61321
8907 “ “ Connecting Link
52992
8907
“ “ " Screw
...................................................
Needle IFir with 857ii
“ “ “ “ Set Screw. . .
“ “ “ (upper)
.................................................
“ “ “ “ Set Scri'w. . .
“ “ “ ‘‘ Hinge Stud
........................
....................................
....................................
1520e 8907
Nut
.............................................................
61.323 8907
399 E
Neefile Far (.Rmneeling Stud with 219f
and two
.........................................................
8907 Needle liar Connecting .Stud (ilampiiig
Screw..............................................................
8907
,54037
,51038 8907 “ Holder
176d 8907
21 Of
857n 8923 “ Set Screw
54108
51109
49092
.51110
Needle Guard
....................................................
........................................
8907
“ “ “ .Screw
“ “ Screw
..................................................
......................................................
...................................................
— -
Oil Tube............................................ . . .
—
“ “ Bracket
8908
“ “ Packing (felt)..............................................
8908
Oil Tul)c comi)lete, for oiling Crank
......................................
Connecting Hod (Upper bearing) Nos.
574j 8908
1,539j 8908
49092, ,54108 and ,54109
Pres.s\ire Kegidaiing 'ГЬшпЬ S(;rew.............
“ “ “ “ Lock
......................
Nut...........................................................
PARTS FOR MACHINE No. U7-2
NO. Pl.ATE ' NAME
t)4'33f) 8908 Slack Thread Controller
4603.'! 81)08 “ “ “ Clamp
.......................................
...................
190d 8908 “ “ “ “ Screw...
54167 8923 “ “ Regulator........................................
54042 8908 “ “ “ Holder with 175e
and 501,50c.....................................................
175b 8908 Slack Thread Regulator Holder Clamping
Screw
..............................................................
54043 8908 Slack Thread Regulator Holder Shaft
24292 8908
Collar with 1019c...........................................
1019c 8908 Slack Thread Regulator Holder Shaft
Collar Set Screw
............................................
54044 8908 Slack Thread Regulator Holder Shaft
Crank (forked) with 1253c
...........................
1253c 8908 Slack Thread Regulator Holder Shaft
Crank Set Screw............................................
50150c 8908 Slack Thread Regulator Set Screw
........................
2102 8909 'I’cnsion (under thread) Disc................................
1560c 8909 “ “ “ Regulating
Thuml) Nut.....................................................
50148c 8909 Tension (under thread) Screw Stud
124687
---------
“ “ “ “ “ 50148c
with 1,560c
.....................................................
42337 8909 Tension (»mder thread) Spring
.......................
............................
13915 8909 “ “ “ “ Bushing..
17547 8909 “ “ “ Thread Guide...
54045 8930 “ (upper thread) Bracket
............................
376d 8909 “ “ “ “ Screw. . .
2102 8909 “ “ “ Disc
1560c 8909 “ “ “ Regulating
Thumb Nut.....................................................
32572 8909 Tension (upper thread) Releasing Disc., .
54988 8909 “ “ “ “ Pin....
54046 8923 “ “ “ “ Shaft
54047 8909
Crank with 624c.............................................
54048 8909 Tension (uirper thread) Releasing Shaft
Crank Link
....................................................
624c 8909 Tension (upper thread) Releasing Shaft
Crank Set Screw
............................................
54990 8909 Tension (upper thread) Releasing Shaft
Spring..............................................................
316f 8909 Tension (upper thread) Releasing Shaft
Slop Screw
......................................................
1547j 8909 Tension (upper thread) Releasing Shaft
Stop Screw Nut
..............................................
15
....
Page 8
16 PARTS FOR MACHINE No. 117-2
PARTS FOR MACHINE No. 147-2
17
NO. PLATE NA.ME
50163c 8909 Tension (upper threud) Screw Stud
52975 8909 “ “ “ Spring
.....................
.....................
13915 8909 “ “ “ “ Bushing..
17547 8909 “ “ “ Threiid Guide...
38225 8909 Thread (under) Eyelet (back)
190i) 8908 “ “ “ “ Screw
..............................
........
38281 8909 “ “ “ (front)
61351 8909 “ “ Nipiier Cam with 465c.. .
465c 8909 “ “ “ “ Set Screw...
38210 8909 “ “ “ Spring (lower). . .
38211 8909 “ “ “ “ (upper)...
46247 8909 “ “ “ “ “ Stop
176u 8907 “ “ “ “ Screw
38475 8910 “ “ Take-up with 465c
____
.............
465c 8909 “ “ “ Set Screw..............
38478 8910 “ “ “ Staple with two
each 590d and 38481.....................................
54049 8905 Thread (under) 'Гаке-up Staple Bracket
with 460c........................................................
965d 8910 Thread (under) 'Гаке-ир Staple Bracket
Screw..............................................................
46041 8909 Thread (under) 'I’ake-up Staple Spring
190d 8908 “ “ “ “ “
Screw..............................................................
38481 8910 'riiread (underl Take-u]) Stajile Thread
Guard.............................................................
590l) 8907 'I'hread (under) 'Гаке-щ) Staple Thread
38482 8910 Thread (under) Take-u]) Stripjier
Guard Screw
.................................................
......................
2071) 8910 “ “ “ “ Screw.
64355 8910 “ “ “ 'ITiread Guard
(hras.s)...........................................................
64356 8910 'fhread (under) Take-up 'I'hread Guard
Steady Pin......................................................
460c 8910 'I'hread (under) Take-up 'I'hn'ad Guard
Steady Pm .Set Screw...................................
51050 8930 'I'hread (upper) Controller
.....................................
207i) 8910 “ “ “ Screw.........................
38484 8930 “ “ Eyelet......................................
190u 8908 “ “ ‘‘ Screw............................
54193 8923 “ “ 'I'ake-up
54194 8923 “ “ “ Plate
................................
............................
51716 8922 “ “ “ “Spring
ll lOi) 8922 “ “ “ “
Sci'cw
.............................................................
54195
------
Thread (u|)per) 'I'ake-up complete, Nos.
1449U, 54193, 54194 and 51716...................
NO. PLATE NAME
219e 8907 'rhread (upper) Take-up Set Screw.......................
54168 8927 Throat Plato (large needle hole) for 54139
54215 8927 “ “ (small needle hole) for 54139,
for glove and similar work
742p 8910 'I'hroat Plate Screw
................................................
...........................
...
SINGER Needles should be used
in SINGER Machines.
These Needles and their Containers
are marked with the
Company’s Trade Mark “SIMANCO. ' * 1
Needles in Containers marked
“FOR SINGER MACHINES”
are NOT SINGER made needles. 2
Page 9
18
LIST OF PARTS COMPLETE
FOR
MACHINE No. 147-23
FOR GENERAL WORK IN FABRICS AND LIGHT LEATHER.
TWO NEEDLES, TWO LOOPERS. GAUGES A TO a» INCH.
ALTERNATING PRESSERS, INDEPENDENT UPPER AND
UNDER FEEDS. THIS MACHINE WILL TAKE THE PLACE
OF 62-47.
NO. I'LATE NAME
*54130
--------
Ann, vip[)or and lower (tolid) with 948u
and 54034.......................................................
42366 8901 Ann Oil Pad (braided cotton) for oilinj;
Ann Hock Shaft Front Hearing...................
56006 8901 Ann Oil Pad (braided cotton) for oiling
Ann Hock Shaft Intermediate Hearing
11119 8901 Ann Oil Tube with 29599, for oiling 64321
40217 8923 “ “ “ “ “ “ “ 54147
29599 8901 “ “ “ Packing (felt)
54002 8902 “ Rock Shaft
64386 8901 “ “ “ Bushing (back)
446c 8901 “ “ “ “ Set Screw
64388 8901 “ “ “ “ (intermediate) .
423c 8901 “ “ “ “ “ Set
Screw
...............................................
................................
............................
PARTS FOR MACHINE No. 147-23
NO. PLATE NAME
52045 8901 Arm Rock Shaft Bushing Oil Pad (braided
54004 8901 Arm Rock Shaft Collar with two 453c. . .
453c 8901 “ “ “ “ Set Screw
54005 8901 “ “ “ Crank (back) with two
50083c 8901 Arm Rock Shaft Crank (back) Set Screw
54132 8923 “ “ “ “ (front) with 448c
2117 8901 Arm Rock Shaft Crank (front) Pin..............
448c 8923 “ “ “ “ “ Set Screw
54105 8901 “ “ “ Flanged Bushing (front)
52045 8901 “
453c 8901 Arm Rock Shaft Flanged Bushing (front)
54006 8903 Arm Rotary Shaft..................................................
54081 8901 “ “ “ Bushing (front)
52045 8901 “ “ “ “ “ Oil Pad
761e 8901 Arm Rotary Shaft Bushing (front) Set
54007 8902 Arm Rotary Shaft Bushing (intermediate)
54089
-----------
64508 8902 Arm Rotary Shaft Bushing (intermediate)
42367 8901 Arm Rotary Shaft Bushing (intermediate)
422c 8901 Arm Rotary Shaft Bushing (intermediate)
50084c 8901 Arm Rotary Shaft Bushing (intermediate)
54008 8901 Arm Rotary Shaft Collar with two 1258c
1258c 8901 “ “ “ “ Set Screw
54009 8902 “ “ “ Flanged Bushing
54090
-----------
58039 8902 Arm Rotary Shaft Flanged Bushing Oil
42367 8901 Arm Rotary Shaft Flanged Bushing Oil
...
159p 8901 Arm Rotary Shaft Flanged Bushing Screw
49013 8904 “ “ “ Front Bearing Oil Pad
144d 8901 Arm Rotary Shaft Screw
15196 8902 “ Side Cover (back).........................................
cotton).............................................................
................
50083c.............................................................
and 453c..........................................................
Oil Pad (braided cotton)
Set Screw
(braided cotton)
Screw...............................................................
“ “
54007 with 42367 and 64508
Oil Pad, long (braided cotton)
Oil Pad, short (braided cotton)
Set Screw (long)
Set Screw (short)............................................
“ “ “ “ “ 54009
with 42367 and 58039
Pad, long (braided cotton)
Pad, short (braided cotton)...........................
(braided cotton).............................................
........................................................
...............................
.............................................
.........................
......................
....................
.............................................
.................
............
....................................
............................
.......................................
19
..
Page 10
20 PARTS FOR MACHINE No. 147-23
NO, PLATE
286d 8904
54010 8904
28f)D 8904
54210 8924
430c 8904
54011 8903
lOllF 8904
50473F 8904
54012 8902
54013
------
38419 8904
725j 8904
54133 8925
54134
------
Arm Side Cover (back) Tlmmb Screw. .
“ “ “ (front.)
“ “ “ “ Thumb Screw. . .
Balance Wheel, 2% in. pulley, with two
430c.
...............................................................
Balance Wheel Set Screw.................................
Cloth Plate.........................................................
“ “ Screw (left)
“ “ “ (right)
“ “ Slide (left)
Cloth Plate Slide (left) complete, Nos.
38419, 54012 and two 725j
Cloth Plate Slide (left) Spring
“ “ “ “ “ Screw
“ “ “ (right) for 54134
Cloth Plate Slide (right) complete for
NAME
.................................
.......................................
..............................
........................................
...........................
..........................
54135, Nos. 38419, 54133, 54209 and
54209 8923
four 725j
Cloth Plate Slide (right) Position Spring
........................................................
725j 8904
Screw..............................................................
54055 8924
5405G
--------
Cloth Plate Slide (right) for 54056
Cloth Plate Slide (right) complete for
54059, Nos. 38419, 54055 and two 725j
54057 8924
54058
Cloth Plate Slide (right) for 54058
------
Cloth Plate Slide (right) complete for
54060, Nos. 38419, 54057 and two 725j
1602e 8922
38419 8904
725j 8904
54135 ---------
Cloth Plate Slide (right) Bushing
..............
“ “ “ “ Spring
“ “ “ “ “ Screw.
Cloth Plate complete, for ^2 >n. to 3^ in
gauges, Nos. 54011, 54013 and 54134.
54059
------
Cloth Plate complete, for in. to 'A in
gauges. Nos. 54011, 54013 and 54056
54000 ---------
Cloth Plate complete, for ^ in. to Ag in
gauges. Nos. 54011, 54013 and 54058
54130 8926
1235d 8904
54017 8902
Cloth Plato Thread Guard
“ “ “ “ Screw
..........................
................
Crank Connecting Rod with 6575, 54018,
54218, 54897, 57222 and two each 896e
and 1057e.......................................................
50069c 8904
Crank Connecting Rod Ball Screw Stud
1516e 8904
Nut..................................................................
64268 8904
Crank Connecting Rod Ball Screw Stud
Washt'r..........................................................
*57222
--------
Crank Connecting Rod Cap (lower)
..............
...................
..................
..................
............
...............
PLATE
NO.
8904
896e
■54018
51897
54218
54137
54111
'54112
54138 8923
21506
52534
54221
'54024
'23729
61171
21332 8904
54025 890li
54019
54020
57225
54026 8905
541 to
57235 8906
—
1057e 8904
8904
8904
8904
6575
8926
142u 8923
8902
8904
896 E
1057e 8904
8904
8904
457 c
8927
8954
8904 Feiid 1 log Screw................................................
157j
8904
50429c
8904
443c
8904
7071
8904
217n
8904
8904
934.j
8904
1103c
8902
8902
8904
8901
453c
8925
PARTS FOR MACHINE No. 147-23
NAME
Crank Connecting Rod Cap (lower) Screw
“ “ “ “ (upper)................................................
“ “ “ “ “ Screw
“ “ “ Oil Cup..................................................
“ “ “ “ Pad (braided
cotton).............................................................
Crank Connecting Rod Oil Pad Stop Pin
Face Plate
...........................................................
“ “ Screw
.........................................................
Feed Connecting Rod with 1057E, 54112
and two 896e
Feed Connecting Rod Cap
“ “ “ “ Screw
...............................................
................................
...................................................
“ “ “ Clamping Screw,. .
“ “ “ Hinge Pin................................................
“ “ “ “ “Collar
with 457c. ............................................................
Feed Connecting Rod Hinge Pin Collar
Set Screw........................................................
Feed Dog.............................................................
“ “ ( s p i k e d t e e t h ) for binding
blankets and similar work
............................
“ “ Sto]) Screw................................................
“ Eccentric
......................................................
“ “ Body...........................................................
“ “ “ Set Screw................................................
“ “ Clamping Washer
....................................
“ “ ‘‘ “ Screw..
“ “ Pressure Spring
........................................
“ “ “ “ t)ai).......................................................
“ “ “ “ “ Screw
Feed Eccentric (adjustable) complete.
Nos. 217n, 934,1, 1103(-, 7071, 21332,
23729, 54024, 61171 and two 443c
Feed Regulating Screw
.....................................
_________
“ (lower) Bar with 50429c and two
453c.......................................................................
Feeil (lower) Bar Connection
“ “ “ Hinge Pin
...............................................
...........................
“ “ “ “ “ Set Screw...
“ “ Rocking Fi'ame with two
453c.......................................................................
Feeil (lower) Rocking Frame Hinge Pitt
Bushing...........................................................
21
Page 11
22 PARTS FOR MACHINE No. 147-23
PARTS FOR MACHINE No. 147-23
23
NO. PLATE NAME
4,53c 8901 Feed (lower) Rocking Frame Hinge Pin
Bushitig Set Screw........................................
453c 8901 Feed (lower) Rocking Frame Hinge Pin
Set Screw
.......................................................
54109 8928 Feed (upper) Bar, for binding and general
work
...............................................................
1423u 8928 Feed (upper) Bar Cap Screw
................................
54142 8928 “ “ “ Connecting Bracket.. .
,54143 8928 “ “ “ “ Jdnk
.............
1423n 8928 “ “ “ “ “ Cap
Screw..............................................................
54144 8928 Feed (upper) Bell Crank
1423d 8928 “ “ “ “ Cap Screw
................................
..........
54145 8928 “ “ “ “ Connecting Link
1423d 8928
Cap Screw......................................................
54146 8928 Feed (upper) Bell Crank Connecting Stud
with 8S9c........................................................
889c 8928 Feed (upper) Bell Crank Connecting Stud
Set Screw
54147 8928 Feed (ipiper; Connection
.......................................................
.....................................
54148 8928 “ “ “ Pin........................
453c 8901 “ “ “ “ Set Screw..
24479 8928 “ “ “ Slide Bar..............
50200c 8928 “ “ “ “ “ Set
Screw..............................................................
1194c 8928 Feed (ui>per) Lifting Regulating Screw
1749c 8928
Nut
.................................................................
9525 8928 Feed (upper) Lifting Regulating Screw
Nut Washer...................................................
54149 8928 Feed (uiiper) Lifting Regulator with
50200c
............................................................
54150 8928 Feed (upper) Lifting Regulator Connect
ing Link
.........................................................
1423d 8928 Feed (upper) Lifting Regulator Connect
ing Link Ca[) Screw
.....................................
50200c 8928 Feed (upper) Lifting Regulator Set Screw
64151 8929 “ “ “ “ Shaft
54152 8928 “ “ “
Crank with two 50200c
................................
50200c 8928 Feed (upper) Lifting Regulator Shaft
Crank Set Screw
...........................................
50950c 8929 Feed (upper) Regulating Screw Stud
51552c 8929
Nut
.................................................................
NO.
39020
IMw\TE
Feed (upper) Regulating Screw Stud
8929
N.\ME
Washer............................................................
Feed (u|)per) Rock Shaft...................................
,541,55
05537
8925
8929
“ “ “ “ Collar with two
405c.................................................................
405c 8909
Feed (iipi)er) Rock Shaft Collar Set
Serewr.............................................................
541,50 8929
Feed (upper) Rock Shaft Crank (back)
with two 50200c..............................................
50200c
,52595 8929
8904
10,57e
Set Screw
........................................................
Feed (upper) Rock Shaft Crank (front)
with 1057e
......................................................
Feed (upper) Rock Shaft Crank (front)
Feed (upper) Rock Shaft Crank (back)
8928
Clamping Screw.............................................
8925 Feed (ui)i)er) Rock Shaft Pitman
,541,57
llF
8929
“ “ “ “ “ Hinge
.....................
Screw...............................................................
1520.)
541,53
453(; 8901
.541.54 8929
.52,590 8929
Feed (upper) Rock Shaft Pitman Hinge
8907
Screw Nut
.......................................................
8925 I'eed (ui)per) Rocking Frame with two
4,53c
................................................................
Feed (upper) Rocking Frame Set Screw. .
“ “ “ “ Slide Block
Feeding Foot.......................................................
,541.58 8929 “ “ Hinge Pin................................................
—
54222
54223
“ “ Plato
........................................................
“ “ Shank......................................................
54224 8954 Feeding Foot (hinged) complete, for bind
ing blankets and similar work. Nos.
54158, 54222 and 54223.................................
203 d
57255 8908
2,5303 8907 “ “ “ Ball, size in
ОКНО 8908
ПЗЗе
54102
ПЗЗе 8907
Feeding Foot Screw
8929
...........................................
Lifting Presser Bar with 25303.........................
...........................................
“ “ “ Bushing (Lower)
8907
8929
“ “ “ “ “Set
Screw
..............................................................
Lifting Presser Bar Bushing (upper)
..................................
“ “ “ “ “ Set
...............
Screw...............................................................
54039 8908
04 Oj
11173 8908 Lifting Presser Bar Guido Bracket Guide
417c 8908
Lifting Presser Bar Guide Bracket with
453c, 640j and 1963
Lifting Presser Bar Guide Bracket .Adjust
8907
ing Screw
........................................................
.......................................
4< a Ч и « u
Set Screw
........................................................
Page 12
24
PARTS FOR MACHINE Nu. 147-23
PARTS FOR MACHINE No. 147-23 25
NO. I'l.ATK NAMK
19t)3 890S Rift inti; Pi (!sser liar (iuide Bracket Roller
and idlud........................................................
453c 8901 Lifiintr Pre.s.ser Bar Guide linu-kcl Set
Screw..............................................................
54153 8929 Lil'Iing Pre.s.ser Bar Lifter
1872 8908 “ “ “ “ Roller and Stud
54161 8930 “ “ “ Lifting BraekO, with
152c and 1872
...............................................
51155 8925 Lifting Presser Bar Lifting Lever
54197 8930 “ “ “ “ “ Connect
ing Stud
4G2c 8930 lifting Prc.sser Bar Lifting Lever (am-
neeting Stud Set Screw.................................
51103 8905 Lifting Presser Bar Lifting la'ver Kxten-
h'ion
...............................................................
151ц 8908 Lifting Presser Bar Lifting Lever Exten
sion Screw (left)
............................................
175n 8907 Lifting Presser Bar Lifting Lever Kxteii-
.sion Screw ‘.right)........................................
802i) 89t)8 Lifting Pres.ser Bar Lifting Lever Hinge
Screw..............................................................
54010 8905 Lifting Presser Bar Spring (tlat)
..................
381ti8 89t)8 “ “ “ “ Stud...................
52535 8930 “ “ I'liot
....................
51225 8951 “ “ “ for binding blankets
and similar work...........................................
190i) 8908 Lifting Pre.s.ser Mint Screw
381t)3 8922 Loojier (back) with 590i) and 381<)1
................................
.................
Noth. When ordering No. tiSlOii, state gauge of
inachiiie for vvhii h reipiired.
1117c 8922 Loo|)er (liack) Set Screw
.......................................
38191 8922 “ “ Thread Guard (doiilde). . .
590i) 8907 “ “ “ “ Screw.................
38195 8922 “ (front)
.................................................
Noth. When ordering No. 38195, state gauge of
inaehiiie for wdiicti required.
1120o 8907 fjooiier (front) Set Screw.......................................
51027 8905 “ ('arrier witli two 171 f.............
17L'' 8905 “ “ Adjusting Screw
51028 8i)i)5 “ “ (tonneetion
...................
...........
..............
50507j 8905 “ “ “ Oil Plug Screw
51(t29 8905 “ “ “ Shaft.................
51030 8905 “ “ “ “ Bushing
50508.1 8901)
Cap Screw'.....................................................
NO. lU.ATK NAME
4 15c 8901 Looper Carrier Connection Shaft Bushing
Set Screw........................................................
49013 8904 Looper Carrier Connection Shaft Oil Pad
(braiiled cotton).............................................
...
...
51031 8905 Looper Carrier Driver with 54032 and
four 3911).......................................................
*51032
------
Looper (airrier Driver Cap
..................................
39In 8905 “ “ “ “ Screw
51033 8907 “ Driving Shaft and Fe'cd Lifting
Eccentric with 227r> and two 54315. . . .
..................
*54034 8905 Loo|)cr Driving Shaft and Feed Lifting
Eccentric Bracket with 751e
........................
51080 8905 Ijooper Driving Shaft and Feed Lifting
Eccentric Bracket Bushing
...........................
751e 8901 Loo\)cr Driving Shaft and Feed Lifting
Kcciuitrie Bracket Bushing Set Screw. .
918i) 8905 Looper Driving Shaft and Feed Ijifting
Eeeeulric Bracket Screw...............................
51315 8907 Looiier Driving Shaft and Feed Lifting
F.eeentric t)il Hole Plug
................................
227i) 8907 Looper Driving Shaft and Feed Lifting
I'icceidric Oil Hole Screw
.............................
10325 8i)07 l.ooper Driving Shaft and Feed Lifling
Fceentric Oil Pad (braided cotton). . . .
(ilOi) 8907 Looper Driving Shaft and I'Vi'd Lifting
Eeeentrie Screw'............................................
5101)1 8922 Looper Holder w'ith 1120c and 1117c. . . .
701,1 8917 “ “ Screw.......................................
01319 8tl22 Needle Bar (hollow'...............................................
510IV2 - Needle Bar complete, for in. to kt in.
gauge.'. Nos. 51054, 51055 and 513)9. .
5105)!
--------
Ni'edli' Bar eomiilete, for 3-2 in. tiO's
gauges. Nos. 51054, 54055 and 54319. .
,38 155 8907 Needle Bar Bashing (lower).............................
1 l)!)!i.: 8907 “ “ “ “ Set Screw...
Iil320 8907 “ “ “ (iiplier)
.......................
1133E8t)l)7 “ “ “ “ Set Screw...
51321 8907 “ “ Connecting Link
...........................
529!)2 8907 “ “ “ “ Hinge Stud
152I)e 8907
Nut
..................................................................
51323 8907 Needle Bar (.¡oniiecting Stud with 219f
and twu 399e
..................................................
399e 8907 Needle Bar Connecting Stud Clamjiing
Screw'..............................................................
51004 8922 Neinlle Clamp with two 1498f..................................
54055 8922 “ “ Thread Guard for 54062...
Page 13
26 PARTS FOR MACHINF \o. 117-26
PARTS FOR MACHINE No. 147-23
27
NO. I>1,-\TE N-\MK
51066 8922 Needle ('lan)[> 'I'hn'atl (luanl for 54063.. .
54067 8922 “ (luard, for 3-2 in. to ¡2 in. gauges.
54068 8922 “ “ “ in. to in. gauges.
54069 8922 “ “ “ in. to j?« in. gauges.
54038 8907 “ “ Holder
176i) 8907 “ “ “ Screw
.....................................
.............................
2I9f 8907 “ “ Screw.......................................
1498t’ 8922 “ Set Screw
,54108
--------
Oil Tube.................................................................
.54109
--------
“ “ »racket
...................................................
..................................................
49092 8908 “ “ I’acking (felt)........................................
54110 8908 Oil Tube complete, for oiling Crank Con
necting Hod (upper bearing) No.s. 49092,
.51108 and ,54109..........................................
574j 8908 Pres.sure Regulating Thumb Screw
.....................
1539J 8908 “ “ “ “ Lock
Nut..................................................................
64336 8908 Slack Thread Controller
16035 8908 “ “ “ Clamp
..........................................
....................
190i> 8908 “ “ “ “ Screw...
61337 <8922 “ “ Regulator........................................
51042 8908 “ “ “ Holder with 175e
and 50150c.....................................................
175k 8908 Slack 4'hread Regulator Holder Clam])ing
Screw..............................................................
54043 8908 Slack Threail Regulator Holder Shaft
21292 8908
Collar with 1019c..........................................
1019c 8908 Slack Thread Regulator Holder Shaft
Collar Set Screw
...........................................
54044 8908 Slack Thnaid Regulator Holder Shaft
Crank (forked) with 1253c
..........................
1253c 8908 Slack Thread Regulator Holder Shaft
Crank Set Screw
...........................................
50150c 8908 Slack 4'hread Regulator Set Screw.......................
2102 8909 Tension (under threiui) Disc
..........................
1560c 8909 “ “ “ Regulating
Thumb Nut....................................................
50148c 8909 Temsion (under thread) Screw Stud.....................
124687
--------
“ “ “ “ “ 50148c
with 1560c......................................................
42337 8909 Tension (under thread) S])ring
.....................
13915 8909 “ “ “ “ Brnshing..’
17547 8909 “ “ “ Thread Guide....
54070 8931 “ (upper thread) Bracket
376d 8909 “ “ “ “ Screw...
2102 8909 “ “ “ Disc
.........................
NO. PLATE NAME
1560c 8909 Tension (upper thread) Regulating
Thumb Nut.....................................................
32572 8909 Tension (upper thread) Releasing Disc...
54988 8909 “ “ “ “ Pin....
54071 8922 “ “ “ “ Shaft
54047 8909
Crank with 624c
............................................
54048 8909 Tension (upper thread) Releasing Shaft
Crank Link
....................................................
624c 8909 Tension (upper thread) Releasing Shaft
Crank Set Screw............................................
54990 8909 Tension (upper thread) Releasing Shaft
Spring
.............................................................
316f 8909 Tension (upper thread) Releasing Shaft
Stop Screw
.....................................................
1547j 8909 Temsion (upper thread) Releasing Shaft
50133c 8909 Tension (upper thread) Screw Stud
Stop Screw Nut
..............................................
.......................
,52975 8909 “ “ “ Spring...................
13915 8909 “ “ “ “ Bushing. .
17547 8909 “ “ “ Thread Guide.. .
54204 8931 Thread Lubricating Oil Cup
...............................
57629 8931 “ “ “ “ Pad (felt)...
54205 8931 “ “ “ “ Thread Guide
217j 8904 “ “ “ “
Screw
54206
------
Thread Lubricating Oil Cup complete,
..............................................................
No.s. 217j, 54204, 54205 and 57629. .. .
38225 8909 Thread (under) Eyelet (back)...............................
190o 8908 “ “ “ “ Screw
,54072 8931 “ “ “ (front)
...............
...................
04351 8909 “ “ Nipper Cam with 465c.. .
465c 8909 “ “ “ “ Set Screw.. .
38210 8909 “ “ “ Spring (lower). . .
38211 8909 “ “ “ “ (upper)...
46247 8909 “ “ “ “ “ Stop
176n 8907 “ “ “ “ Screw
38475 8910 “ “ Take-up with 465c
465c 8909 “ “ “ Set Screw
46047 8931 “ “ “ Staple
------
................
..............
....................
54049 8905 “ “ “ “ Bracket
with 460c.........................................................
96.5n 8910 Thread (under) Take-up Staple Bracket
Screw
..............................................................
...
46041 8909 Thread (under) Take-up Staple Spring
190d 8908 “ “ “ “ “
Screw...............................................................
Page 14
28 PARTS I'OR MAC'HINR No. 147-23
29
NO. ri,.\TK NAME
38482 81)10 Thread (under) Take-up Si ripper
207i> 8910 “ “ “ “ Serew..
64355 8910 “ “ “ Thread Guard
64356 8910 Thread (under) Take-up Thread Guard
460c 8910 ddiread (under) Take-U|) d'hread Guard
64357 8931 'rhread (up]ier) Controller
207i) 8910 “ “ “ Serew
46009 8931 “ “ Eyelet........................................
190o 8908 “ “ “ Serew
54094 8922 “ “ Tuke-ui>
54095 8922 “ “ “ Plate........................
54716 8922 “ “ “ “ Spring.,..
1149i) 8922 “ “ “ “ “ S(uew
54096
------
2I9f 8907 Threail (upper) 'I'ake-up Si>t Serew....................
52512 8927 Throat Plate for 52534
54226 89,54 “ “ " 54221...
742k 8910 “ “ Serew
(hra.-s.s).............................................................
Steady Pin..........................................................
Steady Pin Set S(Te\v.....................................
Thread (uppi'r) 'I'ake-up eoniplete, Nos.
1449i), 51094, 51095 and 54716
...........................................
................................................
.........................
....................................
..........................
..............................
..................................
.................
...................................
IRON BASE
NO. I’LATK NAMK
54091 S959 Machine Base with (hna' each 599k,
599k 8910 Machine Bolt with 1524k
1524k 8910 “ “ Nut
0055 8910 “ “ “ Washer
572S5 8910 “ (aishion (felt)..............................................
918k 8910 Sennv, to faslcm machine to base
0055 and four each 94Sk and 57285 . .
......................................
..................................................
.................................
ACCESSORIES
No.
PKA TK
rJO.itl ,S911
12(1315
1203II
,S911 “ Spout, a in . li
26026
soil Sci'cw I
261,S5
«(III “ (.sina.
«(III
3SIS7
,S(111
SÍHIS «911
19221 ■S9 11
.|.S22
,«911
()il(*r (ciippca' plate
Tlircaillug )\div
TwiR'/Crs (ciU'V(‘d ) .
W iciich f or 1,520. .
N.'
“ “ 1516.
“ “ 1517..
BELT GUARD
NO. PLATE NAME
54052 8939 Belt Guard with 453c
............................................
54053 8940 “ “ Bracket...............................................
27347 8940 “ “ Hinge Pin
...................................
57440 8940 “ “ “ “ Collar with 457o. .
457c 8904 “ “ “ “ “ Set Screw..
453c 8901 “ “ Set Screw
430c 8904 “ “ Stop Screw
1520e 8907 “ “ “ “ Nut
54054
------
Belt Guard complete, Nos. 430c, 1520e,
...........................................
..................................
........................
27347, 54052, 54053, 57440 and wood
screw lyi in. No. 10.........................................
EDGE GUIDE (Roller)
FOR GLOVE WORK
FOR 147-2 MACHINE
NO. PLATE NAME
226261 8942 Edge Guido with 201849
226259 8942 “ “ Bed with 226264
.......................................
...............................
226262 8942 “ “ Lever................................
226264
200297b
201836
-----
“ “ “ Cushion (leather)
--------
“ “ “ Hinge Screw
-----------
“ “ Roller
...............................
.........................
201849 8942 “ “ “ 201836 with 208521...
206521
---------
226263
“ “ “ Stud
------------
“ “ Spring
......................................
..............................
120421 8942 Edge Guide (roller) complete. Nos.
200297b, 226259 and 226261 to 226263
501521) 8942 Edge Guide Screw..................................................
FOOT LIFTER PARTS
NO. PLATE NAME
6439
---------
Chain, 36 in. to 45 in., with 56864 and
56865
...............................................................
Note. When ordering No. 6439, give length required.
4879 8941 Chain Connecting Link
56864 8941 “ Hook (large)
56865 8910 “ “ (small)
126249 8939 Treadle....................................................................
4882 8941 “ Shaft
126250 8941 “ Spring....................................................
126251 8939 “ Stand......................................................
126252 8939 Treadle complete. Nos. 4882, 126249 to
126251 and two wood screws 1 in. No. 16
.........................................
.................................................
..............................................
......................................................
.....
Page 15
30
THREAD UNWINDER
31
KNEE LIFTER PARTS
PLATE
NO.
—
37563
56864
56865
2763
12242 8903
6335
6336
2766
356c
2767
356c
6337 8903
7125
356c 8910
356c 8910
2770
356c 8910
23767 8903
Chain, length 15 in., with 568G4 and 56865
8941
8910
8903
8903
—
8903
8910
8903
8910
8903
8903
“ Hook (large)
“ “ (small)
Rock Shaft
“ “ Hanger with two wood screws
1 in. No. 10.....................................................
Rock Shaft Knee Arm
Rock Shaft Knee Arm complete, Nos.
2766, 2767 and 6335
Rock Shaft Knee Arm Hub with 356c. . .
“ “ “ “ “ Set Screw....
“ “ “ Plate with 356c......................
“ “ “ “ Set Screw........
“ “ Lifting Bracket with two 356c
“ “ “ “ Hook.................
“ “ “ “ “ Set Screw
“ “ “ “ Set Screw... .
“ “ Stop Dog with 356c...........................
“ “ “ “ Set Screw
Rock Shaft complete. Nos. 2763, 2770,
6336, 6337, 7125 and two 12242...................
...................................
.........................................................
BENCH STAND
NO. PLATE
79611
---------
41538
126247 8952
126248 8952
60656 8952
9370 8952
5604 8952
Bench Stand with 5604, 9370, two 41538,
three wood screws 1)4 in. No. 14, four
60656 and sixteen wood screws in.
No. 7
...............................................................
Flush Bolt with Plate com])lete. Nos.
126247, 126248 and four brass wood
screws Vi in. No. 4
Flush Bolt...........................................................
“ “ Plate...................................................
Hinge
..................................................................
Slide Spring........................................................
“ “ Pin
.....................................................
THREAD UNWINDER
FOR TWO SPOOLS
FOR 147-2 MACHINE
NO. PLATE NAME
225395 7233 Sixwl Rest with 201018c
225388 7233 “ “ Rod
.............................................
NAME
............................
......................................
......................................
......................
NAME
.........................................
....................................
NO. PL.ATE
200383c 8910
201018c 8910
202490 7233
225391 7233
201696J 8910
225392 7233
208e 8910
225393 8910
225396
7233 Th
27739 7234
225390 7234
Note.
Spool Rest Rod Set Screw
“ “ Set Screw...........................................
“ Stand with 200383c.....................................
Thread Guide
‘ “ Lock Nut
‘ “ Rod with 208e and 225393
‘ “ “ Screw
‘ “ “ Washer
ead Unwinder complete, Nos. 201696J,
202490, 225388, 225392, 225395, two
225391 and three wood screws V% in.
No. 13...........................................................
Thread Cone (wood) for large cones
“ “ Holder, for inverted cones..
Nos. 27739 and 225390 are used with,
but not included in, 225396.
name
.................................
.....................................................
..................................
..............................
........................
. .
................
THREAD UNWINDER
FOR FOUR SPOOLS
FOR 147-23 MACHINE
NO. PLATE NAME
225395 8953 Spool Rest (for two spools) with 201018c
225388 8953 “ “ Rod
200383c 8910 “ “ “ Set Screw
201018c 8910 “ “ Set Screw...........................................
202490 8953 “ Stand with 200383c
225391 8953 Thread Guide........................................................
201696J 8910 “ “ Lock Nut
225392 8953 “ “ Rod with 208e and 225393
208e 8910 “ “ “ Screw
225393 8910 “ “ “ Washer
225398 8953 Thread Unwinder complete. Nos. 201696j,
202490, 225388, 225392, two 225395,
four 225391 and three wood screws J/g
in. No. 13.........................................................
27739 7234 Thread Cone (wood) for large cones........................
225390 7234 “ “ Holder, for inverted cones..
Note. Nos. 27739 and 225390 are used with,
but not included in, 225398.
....................................................
.................................
.....................................
..........................
...........................
........................
•. . .
Page 16
PLATE 7233-ONE-FOXTKTH SIZE
2253%
I 22532b I
225391
225391
------225324
225388—-
225395
—202490
Page 17
PLATE 7234-ONE-HALF SIZE
27739
225390
PLATE 8901-FULL SIZE
56006 IIII9 29599 446
Page 18
PLATE 8902-ONE-HALF SIZE
54002 54007
^ *
....
,riaitraV|i"i*igt6
M
54009
PLATE 8903-0NE-F0ERTH SIZE
54011
54006
12242
___ _______________
12242
_
7>25 f f
Page 19
PLATE 8904-FULL SIZE
plate 8906-0NE-HALF size
49013 286
38419
O' O •
50069 1516 64208 896 1067
54897 57225 2150b 457
54216
54010
7Z5 1235
430
II
217
6575
50429
157
i-
4 43 7071
6II7I 1103
s
21332
Page 20
PLATE 8906-FULL SIZE
PLATE 8907-FULL SIZE
54 025
57235
540 33 (b40 40326 54035
Page 21
PLATE 8908-FULL SIZE
54110 49092 57255 1872 (,40
PLATE 8909-FULL SIZE
2102 ISfcO 50148 13915 42337
50133 52975 38225 ssi^3a284 38210 3821
Page 22
PLATE 8910-FULL SIZE
PLATE 8922-FULL SIZE
384 75 38478 38481
64-355 64356
742 207 460
¥“
3 56 £01018
£00383 225393
3G5
38482
54094
Ifc0£ 54716 1449
O i V
54095 54065 54066 1498
. 54071
64319 54064 54067 _
64337
38493
“\1
201696 208 1602
t &
COJ
3049 5
1147
Page 23
PLATE 8923-FELL SIZE
PLATE 8924-ONE-HALF SIZE
54208 54132 44-6 54209
^^’38 40217 54167
54046
54194
54 055
54-057
54210
Page 24
PLATE 8925-ONE-HALF SIZE
PLATE 8926-ONE-HALF SIZE
54131 54155 54140 541fc5
54157
54136
54-137
54133
Page 25
PLATE 8927-PULL SIZE
PLATE 8928-rtTLL SIZE
5^215 54168
54141 54169 54142 54143
54139
52 534
Page 26
PLATE 8929-FTTLL SIZE
PLATE 8930-FULL SIZE
V ‘ ,
5'415l 50950 51552 54154- ' 65537
I 39026 ^52595 : 54162
W ~~~ imiliMi I '
54207
54164
54197 54166 54173
54045
Page 27
PLATE 8931-FULL SIZE
PLATE 8939-ONE-FOURTH SIZE
54070
54204
54072 4^009 ¿4357
54091
126252
54052
Page 28
PLATE 8940-FULL SIZE
PLATE 8941—ONE-HALF SIZE
599
948 fc055
19221 6908 120344 120341 38487
26026 121108 4879 5M64
4882
r
Page 29
PLATE 8942-FULL SIZE
PLATE Sgtra-FjyLL SIZE
9370 12b2.47
27998
U4^P0
\Z(oZA-Q 5fcC4
LO
o
60b5b
o
Page 30
PLATE 8953-ONE-rOURTH SIZE
PLATE 8954-FULL SIZE
225391
225398
225326
n
’25391
--225324
54 226
54221
54225
-225388
---------
202490
Loading...