How it Works
SINGER
Loading...
119-2
User Manual
23 pgs2.02 Mb0
User Manual
23 pgs897.61 Kb0
User Manual
15 pgs1.06 Mb0
User Manual
47 pgs4.3 Mb0
Table of contents
Loading...

SINGER 119-2 User Manual

Form 18018 Doceiiiber, lOil
PHINTKD IN' r. a. A.
LIST
OF
PARTS
MACHINES
Nos. 119*2 and 119-3
('oi'YiiK.iiT, U. S. A., 102 t,
BY Tin; SiN'i.EK Mani kai tuhim; Co.
Ai.i. liioiiTs Hk.skhvki) koh ai,i. (.'oi'.nthie.s
INDEX
PAGE
.\CCESS0U!E.S........................................................................................................................... 10
HoiiBiN WTn’dkk.................................................................................................................... 10
“ “ (SwiNGiMi .Vi to M.vnc, Right Hand; ■ ■ ■ 10
I’ooT' Lifteii Rakts................................................................................................................ 20
Machine No. 119-2.................................................................................................................... <
“ “ 119-3 13
XiTMEUH'YE List of R.uits............................................................................................... 23
Obsoeete I’ahts........................................................................................................................ -1

INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the PART number
in the I'TRiST column.
The number stamped on a Sewing Machine part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific number, which, although not stamped on the parts, must be used when ordering the combination.
Each number always indicates the SAME PART in whatever list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of finish only, as follows:
Hardened, Polished and Plated.
A.
Polished and Plated.
B.
Hardened only.
C.
Polished only.
I).
Soft, not Polished.
E.
Hardened and Polished.
F. G.
Blued.
H.
Plated only.
J.
Hardened and Plated.
K.
Brass or Gilt.
L.
Oxidized.
M.
Japanned.
P.
Parkerized.
R.
Copper-plated.
T.
These letters MUST BE USED when they appear in the list, and AFTER the number as in the list.
In this series:
l.to 1500 and 50001 to 51.500 are Screw Numbers. 1501 to 1800 are Nut Numbers. 1801 to 2000 are Roller Numbers. 2001 to 50000 and 52(X)1 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE U.SED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 119-2
FOR GFNERAL WORK ON BRIEF CASES AND OTHER LIGHT
AND MEDIUM WEIGHT LEATHER AND FABRIC. COM BINED UPPER AND NEEDLE FEED, N0 UNDER FEED.
NO. PLATK
:i7:iti:i
29.5tl9 til 14
37:177 88.52 12357 8853
- — Ann
8582 ()114
0114
nut) 1215-1 0114
lltiK 8851
SI)8e
8851
■U8c
8851
Dowel Pin.................................
Oil T'ube with 29599, for oiling 37343
• “ “ “ “ “ “ 37344
“ “ Packing (felt).....................................
Screw (back)
“ (front)
Shaft
“ Flanged Bushing (back)....................
“ “ “ “ Set
•Screw.
NAME
..............................
.............................
.......................................
^ PARTS I'OK МЛСШХ1': No. 119-2
PAR'PS P’OR MACHINE No. 119-2
No, \.\Mi;
liTliO i .SS“).'! ,\гш Sbafi I'laiiai il Hiisliiiig (frolli )
-l:iO( 11112 “ “ “ “ “ Set
Screw..................................................................
Util SS51 Arm Sbafi Serew.............................................................
29505 S85:! “ 2'op ('over ................................................
2050IÌ SS5:i ,\rm 'Гщ) ('over eoinplele, Nos. 29505,
-4 bill 1)111 Arm 'l'o|) Cover lò ietion Washer......................
79l) S851 “ “ “ Hinge Serew
29507 mil “ “ “ Spool Pill ami 'I'breail
29001 0111 .\rm 'Pop Cover Spool Pin anil 'Pbreail
11241 SSOO .\rm 'Pop Cover Spool Pin and 'Pineali
-i:!70 iSS52 lialanee Wheel (heavy rim) 2(Ja' in. [lullev.
l lSr SS51 Hahuiee W heel Sei Serew.........................................
37S59 SS52 Clolh Plate....................................................................
37S0O SS52 “ “ Brackel willi3l5r
:;i5r SS51 “ “ “ Set Serew
:iS9h’ SS51 “ “ Serew....................................................
.47,801 - Clolh Plate with Hraeket complete, Nos.
20197 8853 Crank Ciiimeeling lliid wilh 20198 and
*20198 - Crank Connecting Rod Cap
S9()K ,8851 “ “ “ “ Screw
908c 8851 “ “ “ Hinge Screw. .
1019i; 8851 “ “ “ “ “ Nnl
*37851 Cylinder
37305 Face Plate wilh 37307............................................
37300 8854 Pace Plate eoinplele, Nos. 2827 and 37305
219f 8,851 “ “ Serew
2,827 1)11 1 “ “ 'Phread (liiard (lower) uilh
8.505 0114 Faee Plate'Phread Ciiiard (lower) Rivet .
37307 01 It “ “ “ “ (upper) w i I h
8505 1)111 Face PhOe'Phread (¡nani (upper) Rivet.
7299 ,8853 Feed Bar 37378 0103 “ “ Bell Crank 37379 0103 “ “ “ “ Biacket wilh 1197c.
1497c 0103 “ “ “ “ “ Set Screw .
2121)0103 “ “ “ “ Cap Serew
37310 0103 “ “ “ “ “ “ W'asher,
15170 0103 “ “ " “ Slide Block
29507 ami 29001 ...............................................
1 ,\ ell 1 ............................................................
Kyelet Washer (sleel).........................................
Kyelet Washer (eliilti)
wilh Iwo ItSi' .......................................................
:!7859, 37800 and Iwo 3S9r'..........................
I wo 890r;
.........................................................
................................................................
.....................................................
8505
...................................................................
I wo 8.505 .
.................
.................................................
................................
.......................
.........................................
...........................
...................
............................................
.....
........................................
................................................
..........................
...............
N'll. I'I..\T1,; NAMK
212i> 0103 P'eed Bar Bell (Tank Slide Block Cap
Screw'.................................
...........................
37301 0103 Feed Bar Guide Bracket.......................................
37305
------
“ “ “ “ Cap....................
37300 0103 “ “ “ “ “ 37305 with
37307...............................................................
178f 0103 F'eed Bar Guide Bracket Cap Serew....................
22372 0103 “ “ “ “ Slide Block 37307
-----------
“ “ “ “ “ “ 22372
with 37308......................................................
37308 0103 F'eed Bar Guide Bracket Slide Block Stud 37314 0103 “ “ Socket .loint 37315 0103 “ “ “ “ Cap
........................................
...............................
178k 0103 “ “ “ “ “ Screw..................
37309 8853 “ F'orked Connection 37317 0104 “ Regulator Crank with 1813
2049 0104 “ “ “ Pin
....................................
................
..............................
1813 0104 “ “ “ Roller and Stud.. .
37318 0104 “ “ Lever with 10o7d
................
37319 “ “ “ 37318 with 330i)
and 37320
.......................................................
105i) 0104 Feed Regulator Lever Cap Screw.........................
37320 (il04 “ “ Clamp
............................
3301)0104 “ “ ■“ “ Screw 280i) 0104 “ “ “ “ 'Phumb Screw
10571) 0104 “ “ “ Clamping Screw. . .
37370 0104 “ • “ “ Segment
.........................
330n 0104 “ “ “ “ Screw. ..
37322 0104 “ “ “ Shaft...........................
18055 0114 F’eeding F’oot Hinge Pin......................................
37350 - “ “ Plate
373.57
-----
“ “ Shank............................................
..............................................
37358 8855 I'eeding F'oot (hinged) com|)lete, No.s.
18055, 37350 and 373,57...............................
lOOi) 8851 I'eeding Foot Screw til 10 8,850 Guide (roller) Nos. 1852 and 0441 0441 8850 “ Bracket
..............................................
......................
....................................................
1852 8850 “ Roller and Screw Stud...............................
Kill) 8850 “ Screw
.......................................................
37023 8,853 Lifting Pres.ser Bar (hollow)...............................
37327 0104 “ “ “ Connecting Link . ..
212n 0103 “ “ “ “ “ (.'ap
Serew
..............................................................
37310 0103 Lifting Pres.ser Bar Connecting Link Cap
Serew W'asher...............................................
37380 0104 Lifting Pres.ser Bar Lifter
17512 0101 “ “ “ “ Hinge Pin
......................
........
..
......
10
P
PARTS FOR MACHINE No. 119-2
11
NO.
IM.-ATK
37328
6104
453c 6104
37408 37025 37329
*37331
37332 37348
190i)
.5681
794e
775e
885,3 6114
88.55 88,51 8853 6112
6112
6112 til 12
—
1,55c 6112
37333
8853
1065c
8858
858c
8858
4302
6114
233n
6114
4303
6114
808e
6114
37852
8855
8855
175u
37853
mill)
8855 8855
*24104 8853
—
24105
12388 8853
878.1
8851
6114
124.59
448c 8851
4784
6114
12,389 8852
_
37385
--------
37386 8856
453(;
Screw
‘ “ “ Pin
..........................
‘ Foot (single)............................
‘ “ Screw
...............................
('onnecting Link with 7’J1f. . .
“ “ All justing
Screw,
Stud with 1Г)5(,'. .
“ И73:!‘2 witli
212n iind 15170,
“ “ Crank and Feed (,'ain with
858e and 1(Ш5г
............................................
Needle liar Crank and I’eed Cam Position
Screw........................................................
Needle liar (trank and Feed Cam Set
Screw
...........
Needle liar Thread (luard
“ “ “ “ Screw
................................
.....................
“ Clamp with SOSf......................................
“ “ Scre>w..........................................
“ Plate with lltiln and 37S53 “ “ Screw
.............................................
“ “ d'hread (inard “ “ “ “ Screw
.......................
...............................
................
Oscillating Rock Shaft......................................
Oscillating Hock Shaft complete, Nos.
4784, 12388 and 24104..................................
Oil Hole
Stop Screw
......................................
Oscillating Rock Shaft Hinge Pin <
Stop Screw Washer (leather). .
tscillating Rock Shaft Hinge
Screw
...............................................
tsiiillating Rock Shaft, Oil Pad. . .
“ Shaft
.........................................
“ “ Crank
.......................
I.scillating Shaft Crank complcl
457c, 1518e, 19449 and 373,85.
NO. 1‘LATB NAME
2049 6104 Oscillating Shaft Crank Pin..................................
457c 8856 “ “ “ Set Screw.....................
19448 8856 “ “ “ Slide Block..............
226d 8856 “ “ “ “ “ C a p
Screw
..............................................................
12424 8856 Oscillating Shaft Crank Slide Block Cap
Screw Washer................................................
988c 8856 Oscillating Shaft Crank Slide Block Screw
Stud.................................................................
1o18e 8856 Oscillating Shaft Crank Slide Block Screw
19449
------
Stud Nut
0.scillating Shaft Crank Slide Block com
.........................................................
plete, Nos. 226d, 988c, 12424 and 19448 1210e 8851 Pres.sure Regulating Thumb Screw 2996 8856 Shuttle Bobbin
224840
------
“ “ Case..............................................
.......................................................
15140 8856 “ “ “ Latch
......................
.........................
2973 8856 “ “ “ “ Lever 2974 8856 “ “ “ “ “ Fulcrum
Pin ..................................................................
2975 8856 Shuttle Bobbin Case Latch Spring.......................
592e 8856 “ “ “ “ Stop Screw.. .
15141
------
Shuttle Bobbin Case Hinge, Nos. 2973,
2974 and 15140
7553 8856 Shuttle Bobbin Case Position Finger
..............................................
...........
2523 8856 “ “ “ “ “ Rivet
224841 8856 Shuttle Bobbin Case complete, Nos. 591e,
592e, 2523, 2975, 7553,.15141, 224840
and 224842
.....................................................
37854 8856 Shuttle Body...........................................................
591E 8856 “ Tension Regulating Screw
224842 8856 “ “ Spring
37855
------
Shuttle, 1 in. diam.. Nos. 2996, 37854
and 224841
*37371
------
Shuttle Driver........................................................
.........................................
.....................................................
37372 8856 “ “ 37371 with two 462c
2049 6104 “ “ Pin
................................................
462c 8856 “ “ Set Screw
37876
---------
“ Race Body.............................................
37877
---------
“ “ Ring................................................
........................
..............
.....................................
18413 8857 “ “ “ Spring..................................
1289n 8857 “ “ “ “ Screw
.......................
37878 8857 Shuttle Race (flexible) complete. Nos.
37876, 37877 and two each 1289n and 18413
..............................................................
171e 8857 Shuttle Race Screw
.................................................
....
PARTS I'OR MACllINK No. 110-2
13
NO. I'I..\TE
21(12 «858
I5(i0c 8858 82572 885« 87375 8858 87887 8858 37888 8858
lOOi) 8851
7071 8858
8285
8858
82574
1274c
2103
12149
8858 8858 8858 «858 8858
24148
87404
8858
24Ü78 52454
8858
5(l429c 8H.")S
0112
87389
3094 0112
09(Ik
0112
37843 01 12
0112
12100
11204
430c
87845
0112 0112 0112
_ . .. .
87844
8511 8858
87851 SS5S
440(
8858
'I’cnsioii Disc
“ Ucffuliilinn Thimil) Nut . . .
“ Releasing; Disc “ “ Lever
“ “ “ (’onneelion
N \i !■:
..................................................
...........................
.......................
Tension Releasing; Lever Connection Kx
tension Screw
................................................
'Pension Reliaisinp; l,ever (,'onnection Ex
tension Screnv Washer ................................
'Pension Releasing Lever Hinge Pin................
“ “ “ Spring “ “ Pin
..........................................
.......................
“ Sci-ew Stud.............................................
“ Spring........................................................
“ 'Phiaanl Guard.......................... .
'Pension complete, Nils. 1274c, 15ti0c,
2103, 8511, 32572, 32574, 37851 and
two 2102.........................................................
'Phread Guai il (side of arm I
“ Retainer “ “ S(‘t Scrc'w
..........................................
...................................
...............
“ 'Pake-up Crank..............................
“ “ “ 1\ edge . .
“ “ “ “ ScH'W. .
“ “ Lever
............................................
“ “ “ Hinge Pin. ,
“ “ “ l.ink ...........................................
“ “ “ “ Hinge
Pin.
“ Set
Sci’L’W.............................................
'Phreail 'Pake-up Levi'r completi',
12100, 37348 and 37814
'Phiead 'Pake-up S|iring
..................
......................
N()s.
“ “ “ U(‘»;ui:itnr “ “ “ “ Set Screw
LIST OF PARTS COMPLETE
FOR
MACHINE No. 119-3
FOR STITCHING STRAPS ON WOMEN’S SHOES, SOLES ON
INFANTS’ SHOES AND WORK OF A SIMIUR NATURE. COMBINED UPPER AND NEEDLE FEED, N0 UNDER FEED. THE NEEDLE PLATE IS RAISED AND CLEARANCE IS MADE ON THE TOP OF THE CYLINDER FOR CONVENIENCE IN HANDLING THE WORK.
\(l. l'l..'\TK N.^ME
*8731)8 -- Ann......................................................................
8582 1)114 “ Dowel Pm......................................................
11119 ()11 1 “ 1 )il 'Pulie with 29599, for oiling 37343
12454 0111 “ “ “ “ “ “ “ 37344
29599 0114 “ “ “ Packing ifelt)............................
llOr: 8851 “ Screw (liaekl
808io 8851 “ “ (front 1
37377 8852 “ Shaft
.................................................
...............................................
..............................................................
14 PARTS FOR MACHINE No. 119-3
NO, 1'1,.\TE NAME
12357 S853 Arm Shaft Flanged Hushing (back)
....................
44«t: «851 “ “ “ “ “ Set
Scrr'w..............................................................
37303 8853 Arm Shaft Flanged Bushing (front)
........................
430c 0112 “ “ “ “ “ S e t
Screw
..............................................................
M4n 8851 .Arm Shaft Screw...................................................
295f)5 8853 “ Top Cover.....................................................
29500 8853 .Arm Top tlover complete, Nos. 29505,
29507 and 29001
4430 0114 .Arm 4'op Cover F’rietion Washer
79o 8851 “ “ “ Hinge Screw
..............................
.........................
.........................
............
29507 0114 “ “ “ Spool Pin and Thread
Eytdct.............................................................
29001 0114 .Arm 'I’op Cover Spool Pin and Thread
Eyelet Wa.sher (steel)
...................................
11241 8800 Arm d'oi) Cover Si)ool I’in and Thread
Eyidel Washer (cloth)
...................................
4370 88.52 Balance Wheel (heavy rim) 25A in- pulley,
with two 448c.................................................
448c 8851 Balance Wheel Set Screw
..........................
............
20197 8853 Crank Connecting Hod with 20198 and
t wo 890e
*20198
--------
t.lrank Connecting Rod Cap 890e 88,M “ “ “ “ Screw 90Hc 8851 “ “ “ Hinge Screw
...........................................
....................
............
................
..............
1019k 8851 “ “ “ “ “ Niit.
*37862
------
CyliiuUu-
................................................................
37305 ---------Face Plate with 37307. .. .
...........
37300 8854 F'ace Plate comi)lete. Nos. 2827 and 37305
219p 8851 “ “ Screw..............................................
2827 0114 “ “ 4'hread Guard (lower) with
8,505
........................................
8.505 0114 F'ace Plate Thretui Guard (lower) Rivet..
37307 0114 “ “ “ “ (upper) with
two 8,505........................................................
8.505 0114 Face Plate Thread Guard (upper) Rivet 7299 8853 F'ccd Bar
37378 0103 “ “ Bell Crank
...................................................................
.............
37379 0103 “ “ “ “ Bracket with 1497c.
1497c 0103 “ “ “ “ “ .Set Screw .
2121)0103 “ “ “ “ Cap Screw
...................
37310 0103 “ “ “ " “ “ Washer.
15170 0103 “ “ “ “ Slide Block
212u 0103 “ “ “ “ “ “ Cap Screw
37.304 0103 “ “ Guide Bracket 37305 ---------“ “ “ “ Cap
....................................
.............................
j'bATp:
NO.
37300
178f
0103
6103
22372 6103
—
37307
37308 0103 37314
0103
37315
37309 37317
17Sf
0103 0103 8853 0104
2049 0104
1813
0104 .37,318 37319
37320
lOoij
330i)
280n
0104
—
0104
0104
0104
0104
10571) 0104
37370 0104
330»
217f
0104
0104
8851
37.322
1580e 8851
PARTS FOR MACHINE No. 119-3
NAME
I'eed Bar Guide Bracket Cap 3736.5 with
37307
.....................................
Feed Bar Guide Bracket Cap Screw,. .
“ “ “ “ Slide Block
..........................................
“ “ “ “ “ “ 22372
with 373f38
.................................
F'ccd Bar Guide Bracket Slide Block Stud
“ “ Socket Joint..................................
“ “ “ “ Cap “ “ “ “ “ Screw “ F'orked Connection
......................................................
................................................
.................
“ Regulator Crank with 1813 “ “ “ Pin
................................................
“ “ “ Roller and Stud. ,
“ “ Lev'cr with W57d. .
“ “ “ 37318 with 330»
and 37320
.................
Feed Regulator Lover Cap Screw. , .
“ “ “ Clamp “ “ “ “ Screw
............................................
...................................................
“ “ “ “ Thumbscrew ‘ “ “ Clamping Screw..,
“ “ “ Segment................................................
“ “ “ “ Screw. . . .
“ “ “ Shaft
.....................................................
“ “ Stop Screw, for in-
fants’ shoes
.......................
F'eed Regulator Lever Stop Screw Nut,
15
for infants’ shoes. . .
37803
88,55
37873
190i) 8851 37023 37327
212i)
F'eediiig F'oot............
8855
ladies'shoes
F'eeding F'oot Screw. .
8853
Lifting Pre.sser Bar (hollow) .
0104
“ “ Connecting Link
6103
“ “ for stitching back straps on
............
,
“ U H n
......................
Cap
.Screw.......................
37310
0103
Lifting l*rcs.ser Bar Conneding Link Cap
Screw Washer . , .
37380
0104 17,542 37328
...
453c
37408 37025
lafting Presser Bar Lifter. , . 0101 OKU
4,53o
0104
88.53
.....................
Lifting Pre.sscr Bar Lifting Bracket Set
Screw
.............
Lifting Prcsscr Bar Spring . 0114
“ “ “ Hinge Pin
...............................
“ “ Lifting Bracket with
(( T3'
rm
...................
Loading...
+ 16 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use