SINGER 117-4 User Manual
Form 18415
Fobruary, 1930
PBINTSD IN U. 8. A.
LIST
OF
PARTS
MACHINES
Nos. 117-3 and 117-4
THE SINGER MANUFACTURING COMPANY
COPVKIGHT, U. S. A., 1921, 1922, 1923, 1925, 1928 and 1930
BY The Singeu Manufactuuinu Co.
All Rights Resekveu fob Ai.l Countuies
INDEX
P.AGE
Accessories......................................................................................... 36
Foot Liei'er Chain Guide...................................................................... 37
“ “ Parts.............................................................................. 36
Iron Base........................................................................................ 36
Machine No. 117-3
“ “ 117-4.......................................................................... 22
Numerical List OF Parts.......................................................... 41
Table Support Parts
Thread Nipper Timing Gauge
“ Unwinder............................................................................... 37
Under Driver............................................................................... 38
.........................................................................
..................................................................
...................................................
7
37
37
INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part NUMBER
in the FIRST column.
The number stamiied on a Sewing Machine part is in every
case the luiinher of the single part only.
Every cond)ination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish oidy, as follows:
A—Hardened, Polished, Nickel Plated and Buffed
B—Polished, Nickel Plated and Buffed
C—Hardened Oidy
D—Polished Only
E—Soft, Not Polished
F—Hardened and Polished
11—Blued
J—Nickel Plated Only
K—Hardened and Nickel Plated
L—Brass Plated
M—Oxidized
N—.lapanued, Dull
P—Japanned, Bright
R—Merlized
T—Copper Plated
T. A.—Hardened, Polished, Copper and Nickel Plated
T. B.—Copper and Nickel Plated and Polished.
T. J.—Coj)per and Nickel Plated Only.
T. K.—Hardened, Copper and Nickel Plated.
T. M.—Copper Plated and Oxidized.
T. L.— Coi>per and Brass Plated.
Z. B.—Polished, Nickel Plated, Buffed and Chromium Plated
Z. J.—Nickel and Chromium Plated.
These letters MUST BE USED when they appear in the list;
and AFTER the number as in the list.
In this series:
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
and Buffed.
U—Zinc Plated
V—Silver Plated
W—Polished and Nickel Plated
Z—Chromium Plated
1 to 1500 and 50001 to 51500 are Screw Numbere.
1501 to 1800 and 51501 to 61800 are Nut Numbers.
1801 to 20t)0 and 51801 to 52000 are Roller Numbers.
2001 to 50000 and 52001 and upward are numbers of
Machine Parts.
LIST OF PARTS COMPLETE
FOR
KlbLl
MACHINE No. 117-3
FOR STITCHING STRAW HATS WITH A CONCEALED STITCH.
ONE NEEDLE. ONE HOOK EYE NEEDLE. POSITIVE SET
FOR REGULATION OF LENGTH OF STITCH. LENGTH OF
STITCH A TO As INCH. THE MACHINE IS FITTED WITH
A THREAD NIPPER RELEASER AND LOOP SPREADER:
ALSO A HINGED COVER TO THROW BACK, FOR THE
CONVENIENCE OF REACHING THE LOWER PARTS OF THE
MACHINE.
SUPERSEDES 117-2 MACHINE
NO. I'U.'iTE
*01765
-------
64751 8475
21<Jn 8494
64766 8475
33Un 8495
50003 8484
Arm, upper and lower (solid) with 64772,
two each 50012c, 64773 and four 50128e
Arm End Cover (back)
“ “ “ “ Screw
“ “ “ (front)
“ “ “ “ Screw
“ Oil Tube with 52045
NAME
...................................
.....................
.....................................
.....................
.................................
8 I'AirrS l''01{ MACHINK Xo. 117-3
PARTS FOR MACHINE No. 117-3
NO. l'I,.\TI0 NAME
52015 9801 Ann Oil 'I'libe Packing (felt)
65014 8175 “ Rotary Shaft
.............................
...................
64505 8176 “ “ “ Bashing (front)..........
453c 8104 “ “ “ “ “ Set
S(Tow
.........................................................
65915 8476 Ann Rotary Shaft Bushing (intermediate)
Patcentric
....................................................
1299c 980-1 Ann Rotary Shaft Bushing (intermediate)
Kcceiitric Set Screw
...................................
32152 8470 Ann Rotary Shaft Collar with two 889c.
88S)c 8494 “ “ “ “ Set Screw
.............
64507 8475 “ “ “ Pdanged Bushing (back)
with 64508..................................................
64508 8482 Arm Rotary Shaft P’langed Bushing (back)
Oil Pad (braided cotton)
.............................
159f 8473 Ann Rotary Shaft P'langed Bushing (back)
Screw'
.........................................................
64509 8475 Arm Side Cover.................................................
219i) 8494 “ “ “ Screw'.....................................
f)1510 8475 Balance Wheel, 3 in. pulley, w ith two 448c
448c 8494 “ “ Set Screw
61768 8475 Face Plate
.............................................................
219i) 8494 “ “ Screw
64769 8475 P’eed Bar
...........................................................
64770 8482 “ “ Carrier with 453c
64516 8482 “ “ “ Hinge Pin
64517 8476 “ “ “ “ *• Bu-shing
..................................
..................................
.............................
................
.......
446c 8494 “ “ “ “ “ “ Set
Sc.rew.........................................................
45)i(; 8494 p’eed Bar Carrier Hinge Pin Set Screw...
64771 8476 “ “ “ Washer
.....................
64772 8498 “ “ Cover............................................
64773 8476 “ “ “ Hinge Plate........................
50128F, 8494 “ “ “ “ “ Screw
..............
50012c 8495 “ “ “ “ Screw......................
04774 8476 “ “ “ l.atch
92n 8495 “ “ “ “ Hinge Screw
64775 8476 “ “ “ “ Spring
.................................
...........
.....................
217i) 8194 “ “ “ “ “ Screw..............
64776 8476 “ “ Hinge Stud
1467c 8494 “ “ “ “ Cap Screw'
15201; 8495 “ “ “ “ Xut
19021 8476 “ “ “ “ *' Washer
64521 8476 “ “ lifting lank with 624c
125633
-----------
“ “ “ “ 64521 with 836e,
.......................................
..............
............................
............
.............
1021i), 51598c, 645)16, 65875, 65876,
65893, 125631 and 1256)12.......................
NO. PLATE
102In 8473
64777 8476
171e 8473
64523 8476
624c 8494
64778
61779
6-1783
()5938
1)167e
65939
659-10
65941
9804
8499
8499
8481
9800
9800
9800
9800
9800
125629
65942 9800
659-1)1 9800
65944 9800
8476
61784
996c
65945
65952
6595)1
238n
50383c
64787
453c
64788
8-173
8473
9804
980t)
9806
9804
8495
8476
8494
8490
50)182c
64789 848)1
64790 8183
1467c 8494
1517e 8-495
64791 8483
50623e 8494
50624E 8494
64533 8483
NAME
P’cod Bur Lifting Link Cap Screw.................
“ “ “ “ Guide
'• “ “ “ “ Screw
...............
........
“ “ “ “ Hinge Stud
“ “ “ “ “ “ Set
Screw'..........................................................
P’eed Bar Shim (w'asher)
“ L)üg
..........................................................
U U
“ “ for edge stitching
...............................
............................
“ “ Plate with two 65940, for 659-41
“ “ “ Screw
“ “ “ Holder for 65941
.....................................
.....................
“ “ Spur for 65938 and 65942...............
P’eed Dog (coarse) 7 teeth (lOJg teeth to
the inch) complete, for straw hat work,
Nos. 1367e, 65938 and 65939....................
P’ecd Dog I’late with tw'o 65940, for 65944
“ “ “ Holder for 65944
................
P'eed Dog (fine) 9 teeth (14 teeth to the
inch) complete, for strawhat work, Nos.
1367e, 659-12 and 65943
P’eed Dog Carrier
...........................................
...........................
“ “ “ Regulating Screw.................
“ “ “ Screw
................................
“ “ “ Washer..................................
“ “ Racking .005 thich
...........................
“ “ “ .015 thick......................
“ “ “ Screw...................................
“ “ Screw.
“ Eccentric with two 453c
“ “ Set Screw'
....
.........................................
...........................
....................................
“ P’orked Connection with two each
50G23E, 50624e and 64791
.......................
P’eed P’orked Connection Hinge Stud
Busliing (eccentric)
....................................
P’eed P’orked Connection Hinge Stud Cap
Screw'..........................................................
P’eed P'orked Connection Hinge Stud Nut
“ “ “ Wearing Plate
a a u u
Screw' (long)...............................................
P'eed P’orked Connection M'earing Plate
Screw (short)...............................................
P’ecd Lifting Ifccentric with two 453c.. . .
.........
10 PARTS l''()R MAiRIINlO No. 117-3
PARTS FOR MACHINE No. 117-3 11
NO. I‘[..\TK N.\MK
(14792 8483 Feed idfting Kccenlric Connection with
G5893
*64.53.5
------
(14 53.5 and two 89(1e
h'eed Lifting I'lccentrii^ Connection (14792
-----
wiUi 61.533
Feed Idfting Fccentric Connection Cap
................................................
..............................
89(1e 8494 “ “
Hcrew
....................................................................
6453(1 8483 Feed l.ifling Eccentric (lonnection Stud
64537 8483
Rushing
......................................................
44(lc 8494 I'eed Lifting Eccentric Connection Stud
Biisliing Set Screw.....................................
4u3c 8494 Feed Lifting Eccentric Set Screw'
......................
(14793 8482 “ Regulatorwithl253u,2049and65801
(14794 8483 “ “ Connecting Link
.................
.50tl25c 8495 “ “ “ “ Hinge
Screw..........................................................
l(i3(ÌE 8495 Feed Regulator Connecting I.ink Hinge
Screw Nut...................................................
64795 8483 I'eed Regulator Connecting Link Hinge
Screw Wa.sher.......................................... .
(14796 8483 Feed Regulator Handle........................................
2532 8483 “ “ “ Position Pin
................
64797 8483 “ “ “ “ Plate
with 125630................................................
399w 8495 Feed Regulator Handle Position Plato
125630 9806 I'Ted Regulator Handle Position Plate
Screw.....................................................................
'I'hread Cuide..............................................
647ÌÌ8 8483 Feed Regulator Handle Releasing Lever
with 223i)
...................................................
64799 8483 Feed Regulator Handle Releasing I.ever
Hinge Pin....................................................
223n 9804 Feed Regulator Handle Releasing Lever
Hinge Pin Set Screw
..................................
65913 8483 Feed Regulator Handle Siiring......................
64800 8483 “ “ “ Stud with 2532..
1253c 8494 “ “ “ “ Set Screw..
50626c 8495 “ “ Hinge Screw
151810 8495 “ “ “ “ Nut
....................
...................
20i9 8483 “ “ Pin........................................
6.5801 8484 “ “ Shaft.....................................
6.5802 8484 “ “ Shaft Rushing
..................
446c 8494 “ “ “ “ Set Screw
1029d 8494 “ “ “ Cap Screw
6.5803 8484 “ “ Stoj)
.....................................
690d 8473 “ “ “ Screw
................
............................
NO. I'l.ATE NAME
lti27u 8495 Feed Regulator Stop Screw Nut..........................
6.5909 8484 Guide..................................................................
64717 8484 “ Holder
217i) 8494 “ Screw
65910
--------
Guide, for edge stitching, No,s. 64717,
..................................................
...................................................
65909 and two 217d...................................
117x7
--------
Hook....................................................................
65804 8484 “ Guard
...................................................
17510 8473 “ “ Screw............................................
65984 9804 Loop Spreader, for straw hats............................
65986 9806 “ Driving Lever.....................
12.5626 9801 “ “ “ “ Shim
...........
65987 9804 “ “ and Driving Lever Holder
65988 9804
Hinge Pin....................................................
*125627
------
Loop Spreader and Driving I^ever Holder
Hinge Pin Rlock.........................................
460c 8494 Loop Spreader and Driving Lever Holder
Hinge Pin Set Screw...................................
50117i) 9804 Loop Spreader Driving Lever Screw
.................
51875 9804 “ “ “ “ Roller and
Stud
.............................................................
223i) 9804 Loop Sjireader Screw'
65805 8484 Ijooper
...............................................................
337i> 8495 “ Adjusting Screw
........................................
.................................
64550 8484 “ Carrier with 50014c and 50311c
64551 8484 “ “ Connecting Stud
................
615.52 8484 “ “ “ “ Pin.........
.50014c 8494 “ “ “ “ “ Set
Screw...........................................................
65806 8482 Looper Carrier Frame with 453c, 65807
and two 456c...............................................
65886 ------I.ooper Carrier Frame complete. Nos.
193n, 208i), 337u, 874f, 64550 to 64554,
64668, 64670, 64671, 64674, 65804 to
65806, 65820, 65835, 65868 and two
each 175e and 64675
..................................
64616 8484 Looper Carrier Frame Connecting Link, .
65807 8484 “ “ “ Cushion (rawhide)
66000 9803 “ “ “ Spring (flat)
65808 8185 “ “ “ “ Lifting
Lever
...........................................................
2273 8185 Looper Carrier Frame Spring Lever Pin, .
61720 8485 “ “ “ “ “ Shaft
65809 8485 “ “ “ “ “ “
Crank with 443c and 50150c
......................
.....
12 Г
'AUTS FOR MACllINK No. 117-3
PARTS FOR MACHINE No. 117-3
13
ко. PLATE
8191
Г)()15Пс 9801
65810 8185
175е 8173
65811 8185
217d 8191
65812 8185
61553 8185
193i) 8173
61551 8185
453с 8191
125637 9801
65811 8185
129Е 8173
125638 9801
1012с 8195
61558 8185
125639 9801
153с 8191
61560 8185
118с 8191
65816 8182
61562 8186
130с 8191
61710 8186
135с 8191
61563 8186
1133с 8191
65817 8182
65895
--------
*65818
--------
896е 8191
N.AMB
Loo{)cr Carrier Frame Spring Liftiiif; Lever
Shaft Crank Set Screw (long)
....................
lajOper Carrier F'raine Spring Lifting Lever
Shaft Crank Set Screw (short)....................
Looper Carrier Frame Spring lifting Lever
Shaft Crank Spring
.....................................
Looper Carrier Frame Spring Lifting Lever
Shaft Crank Spring Screw
Looper Carrier F’rame Spring I’osil ion Plate
U a i( ii ii U
Screw
..........................................................
..........................
Looper Carrier Frame Spring Steatly Pin.
“ “ Guide.........................................
“ “ “ Screw............................
“ “ Hinge Stud..
.........
....................
“ “ “ “ Set Screw.. . .
“ Flccentric
................................................
“ “ Body with 118c and two
129e
............................................................
Ia)oi)er Fccentric Body Set Screw
.................
“ “ Connection with 453c,
1012c and 64558
..............-........................
Looper Eccentric Connection Adjusting
Screw
..........................................................
Looper Eccentric Connection Gib..................
“ “ “ Pin.................
“ “ “ “ SetScrew
“ “ Pin
............................................
“ “ “ Set Screw.......................
“ Rock Shaft
“ “ “ Bushing (back)
..............................................
........
“ “ “ “ “ Set
Screw
..........................................................
liOoper Rock Shaft Bushing (front)
........
“ “ “ “ “ Set
Screw
..........................................................
Looper Rock Shaft Collar with 1133c.. . .
“ “ “ “ Set Screw
..............
“ “ “ Connecting Rod with
65818 and two S96e...................................
Loo|)er Rock Shaft Connecting Rod 65817
with 61560, 61566, 65811, 65819, 125637
and 125639
Looper Rock Shaft ('onnecting Rod Can
u u ic u ii a
Screw
.................................................
..........................................................
NO. PL.ATE NAME
61566 8186 Looper Rock Shaft Connecting Rod Hinge
Stud.............................................................
453o 8194 Looi)er Rock Shaft Connecting Rod Hinge
Stud Sot Screw
...........................................
65819 8486 Looper Rock Shaft Crank (back) with
160e and 453c
............................................
160e 8473 I;ooper Rock Shaft Crank (back) Clamp
ing Screw
....................................................
65820 8486 Looper Rock Shaft Crank (front) with
453c.............................................................
2019 8483 Looper Rock Shaft Crank (front) Pin
453c 8194 “ “ “ “ “ Set
Screw
..........................................................
87 1e 8473 Looper Screw.....................................................
65990 9803 Needle Bar with 1259c
65991
------
Needle Bar complete, Nos. 65990 and
125628
........................................................
......................................
61570 8480 Needle Bar Connecting Link.......................
65823 8486 “ “ “ “ Slide Block
61573 8482 “ “ Driving Lever
65887
--------- Needle Bar Driving Lever complete. Nos.
...............................
49174, 50258b, 64573, 64734, 65823 and
two 1607b
...................................................
50258b 8494 Needle Bar Driving Lever Adjusting Screw
1607b 8195
Nut
..............................................................
04571 8486 Needle Bar Driving Lever Hinge Stud
with 1230f
..................................................
05983 9804 Needle Bar Driving Lever Hinge Stud
Bushing.......................................................
1230f 8494 Needle Bar Driving Lever Hinge Stud
Oil Hole Plug Screw...................................
446c 8494 Needle Bar Driving Lever Hinge Stud
Set Screw
....................................................
49174 8493 Needle Bar Driving Lever Lubricating
Wick............................................................
04734 8493 Needle Bar Driving Lever Lubricating
Wick Retaining Pin
05824 8480 Needle Bar Eccentric with two 453c
....................................
.................
61576 8187 “ “ “ Connection with
*64577
64577 and two 896в
--------
Needle Bar Eccentric Connection Cap
...................................
896e 8494
Screw
..........................................................
453c 8494 Needle Bar Eccentric Set Screw
65992 9803 “ “ Guide with 460c
1029p 8494 “ “ “ Adjusting Screw
.........................
...........................
.................
M
PARTS FOR MACHINE No. 117-;i
PARTS FOR MACHINE No. 117-3
15
PLATE
NO.
129d
*65825
65826 8487
*65827
*64582
64554
416c
65828 8487
65829
50027c 8495
65830 8487
504381) 8494
65831
8487
04554
8485
448c 8494
64585 8487
448c
'64586
—
64587 8487
64588
8487
5923
8482
64589
64590
8487
8494
440c
64517 8476
N.-IMK
8473
Needle Bar Guide Screw
................................
“ “ Regulating Pitman, Nos.
64582, 64586, 64587 and 65827
Needle Bar Regulating Pitman complete.
Nos. 64588, 65825 and two 5923
Needle Bar Regulating Pitman (lower)
“ “ “ “ (upper)
8485
ii ii U U U
Hinge Stud..................................................
8494
Needle Bar Regulating Pitman (upper)
Hinge Stud Set Screw
................................
Needle Bar Regulating Pitman Bell Crank
—
with 418c
Needle Bar Regulating Pitman Bell Crank
....................................................
complete. Nos. 65828, two 50627c and
four each 50438u and 65830
Needle Bar Regulating Pitman Bell Crank
Ball Screw Stud..........................................
Needle Bar Regulating Pitman Bell Crank
Ball Screw Stiul Bearing
............................
Needle Bar Regulating Pitman Bell Crank
Ball Screw Stud Bearing Position Screw
Needle Bar Regulating Pitman Bell Crank
Connecting Link.........................................
Needle Bar Regulating Pitman Bell Crank
Connecting Link Hinge Stud
Needle Bar Regulating Pitman Bell Crank
Connecting Link Hinge Stud Set Screw
Needle Bar Regulating Pitman Bell Crank
Hinge Pin....................................................
8494
Needle Bar Regulating Pitman Bell Crank
Hinge Pin Set Screw
..................................
Needle Bar Regulating Pitman Connect
ing Pm.........................................................
Needle Bar Regulating Pitman Connect
ing Pin Rivet...............................................
Needle Bar Regulating Pitman Spring
8487
il u II II II
Pin...............................................................
Needle Bar Regulating Shaft..........................
“ “ “ “ Bushing
(back)..........................................................
Needle Bar Regulating Shaft Bushing
(back) Set Screw.........................................
Needle Bar Regulating Shaft Bushing
(front)..........................................................
................
..............
......................
......................
NO. I‘].,\TE NAME
416c 8194 Needle Bar Regulating Shaft Bushing
(front) Set Screw
........................................
24833 8487 Needle Bar Regulating Shaft Collar with
1019c..........................................................,
1019c 8494 Needle Bar liegulating Shaft Collar Set
Screw
..........................................................
64591 8488 Needle Bar Regulating Shaft Crank (hack)
with three 448c;
..........................................
4 18c 8194 Needle Bar Regulating Shaft Crank (ba(;k)
Set S<;rew...................................................
64592 8488 Needle Bar Regulating Shaft Crank (front)
with two 448c..............................................
64593 8488 Needle Bar RegidatingShaft Crank (front)
Connection with 50380c.............................
212u 8194 Needle Bar RegidatingShaft Crank (front)
Connection Cap Screw
...............................
64594 8488 Needle Bar Rcigulating Shaft Crank (front)
Connection Hinge Stud
..............................
50380c 8494 N(>edle Bar Regulating Shaft Crank (front)
Connection Hinge Stud Set Screw
.............
418c 8494 Needle Bar RegidatingShaft Crank (front)
Set Screw
65927 9804 Needle Clamp
....................................................
...................................,...................
125628 -------- NeedleClami) complete, Nos. 208n,50362[),
50129c, 50558c, 65927, 65929, 65930,
65933, 05934 and 65993
819 4 Needle Clamp Adjusting Screw
50429c
9805 “ “ Gih (.015 thick)
65929
9805 “ “ “ (.035 thick)
65930
9805 “ “ “ Pin....................................
65933
9805 “ “ Plato.....................................
65934
819 4 “ “ “ Screw..............................
20Si)
8495 “ “ Screw
50558c
8494 “ “ Set Screw...................................
1259c
8188 “ Guard
65835
8173 “ “ Screw
175e
50385«
849 4 “ Stop Screw
9805 “ “ “ Bracket with 50385o
65993
and two 54875
..................................................
............................................
50362n 9804 Needle Stop Screw Bracket Screw
............................
.......................
.....................
......................
....................................
....................................
..........................................
.....................
65838 8 188 Plait Guide (inside edge) Lock Stud with
13090
..........................................................
50628tv 8494 Plait Guide (inside edge) Lock Stud Cap
Screw
..........................................................
13090 8488 Plait Guide (inside edge) Lock Stud Posi
tion Pin........................................................
18-415—2
Iti PAirrS FOR MACHINE No. 117-3
PARTS FOR М.АСНШЕ No. 117-3
17
NO. I'I..^'I’I0 NA.MK
1779.1 8488 l’hiit (ìuide (innideedge) IjOckStudTIumd)
Niit..............................................................
0504(1
05840
--------
l’iail Guide (inside edge) Piate
-----------
“ “ “ “ “ Hod
...................
.........
(Ì5947 9805 “ “ “ “ Nos. 05840 and
05940..........................................................
05841 8489 Plait, Guide (lower) with 202n..........................
1407n 8494 “ “ “ Adjusting Screw'
01004
--------
Plait Guide (stationary) Nos. 04005 ami
..............
04000..........................................................
04()05 8489 PlaitGnide (stationary) Bracketw'itli 405c
04000 8489 “ “ “ Hod, for fine braid
05842 8489 “ “ “ “ “ medium
braid............................................................
05843 8489 Plait Guide (stationary) Rod, for coarse
braid............................................................
405c 8494 Plait Guide (statioiiiiry) Rod Sot Screw
for 04005
....................................................
202u 8494 Plait Guide (statiouiiry) Rod Set Screw
for 05841
....................................................
04007 8489 Plait Guide (u|)i)er)......................................
32202 8489 “ “ “ Friction Washer
89w 8495 “ “ “ Hinge Screw'
...........
....................
05844 8489 “ “ “ Holder with 54705. .
04009 8489 “ “ “ Lock Stud
....................
32240 8489 “ “ “ “ “ Spring
50117w 8494
Screw
..........................................................
208w 8494 I’lait Guide (upper) Screw'
................................
54705 8489 “ “ “ Steady Pin....................
05845 — Plait Guide complete. Nos. 89w', 208w',
1779J, 32240, 32202, 5()117w, 50028w,
04007, 04009, 05838, 05841, 05844 and
05947..........................................................
05840 8489 Plait Guide Block
..............................................
219i) 8494 “ “ “ Screw'.................................
19054 8489 “ “ Friction Washer
04014 8473 “ “ Regulating I'inion
.............................
......................
50380I'’ 8473 “ “ “ “ Screw....
5(»387f 8473 “ “ Scre.w'........................................
05847 8482 T’resser Bar with 04004
04018 8488 “ “ Adjusting Pin
440c 84',)4 “ “ “ “ Set Screw
0584 8 8488 “ “ Lifter (side of arm)
....................................
.............................
.........
..................
01022 8488 “ “ “ “ “ “ Hinge
Pin...............................................................
NO. lU.ATB N.AME
04023 8488 Presser Bar Lifter (side of arm) Shaft
04624 8488 “ “ “ “ “ “
Crank w'ith 735c.........................................
2209 8488 Presser Bar Lifter (side of arm) Shaft
Crank Pin..................
..................................
735c 8494 Pre.sser Bar Lifter (side of arm) Shaft
Crank Set Screw
.........................................
04625 8488 Presser Bar Lifter (side of arm) Spring
208n 8494 “ “ “ “ “ “
Screw...........................................................
04020 8488 Presser Bar Lifter (side of arm) Stop
Bracket
........................................................
159u 8473 Presser Bar Lifter (side of arm) Stop
Bracket Screw.............................................
64627 8490 Presser Bar Lifting Shaft
64628 8486 “ “ “ “ Bushing
..........................
............
453c 8494 “ “ “ “ “ Set
Screw'..........................................................
*65849 8491 Presser Bar Lifting Shaft Crank (back)
with 446c and 448c.....................................
898c 8494 Presser Bar Lifting Shaft Crank (back)
Adjusting Screw
.........................................
♦65850 8491 Presser Bar Lifting Shaft Crank (back)
Connection with 446c.................................
64631 8491 Presser Bar Lifting Shaft Crank (back)
Extension with 453c
...................................
453c 8494 Presser Bar Lifting Shaft Crank (back)
Extension Set Screw
...................................
446c 8494 Presser Bar Lifting Shaft Crank (back)
Set Screw (long)
.........................................
448c 8494 Presser Bar Lifting Shaft Crank (back)
Set Screw (short)
........................................
65851 8491 Presser Bar Lifting Shaft Crank (front)
W'ith 1390b
................................................
1390e 8495 Presser Bar Lifting Shaft Crank (front)
Set Screw
65907 8491 Pres.ser Bar Tipper
50049c 8494 “ “ “ Adjusting Screw
50029c 8495 “ “ “ Screw Stud
....................................................
............................................
................
...................
1712c 8495 “ “ “ “ “ Thumb
Nut
..............................................................
05908 8491 Presser Bar Tipper Spring
65954
05955
65950
65957
64041
--------------
--------------
--------------
---------------
--------------
“ Foot Guide for 05962
“ “ “ “ 65903
“ “ “ “ 65964
“ “ “ “ 65905
“ “ “ “ 65862....................
....................................
...................
...................
...................
...................
IS
NO. Pi.-STi:
(l-Kil'i --------
(il(ji:S
--------
(ill) 11
---------
5I.S0 S191
1001.') S191
lOOlO 8101
.50.'5sSc 8171
(Ì.195S
------
0.5059
-------
05001)
-------
05901
------
0597:5
-------
05071
--------
05975
--------
05070
--------
01722
--------
117211 8195
(),5850 ------05011
--------
05077
--------
05902 0801
O590:5 9801
05001 0801
05905 9801
05978 0802
05079 0802
059,80 0802
65081 9802
PAlìT.S I'Oli MACIIINK No. 117-15
NAMK
Presser Foot (luidc for 0580:i
........................
“ “ “ 05801 iiml 05805..
“ “ “ Adjusting l.ever witli
19015 and 19010........................................
Pres.ser I'oot Guide Adjusting 1/ever Frie-
tioii Washer
................................................
Pre.sser Foot Guide Adjusting Lever
Handle........................................................
Presser Foot Guide Ailjusting Lever Pin.
“ “ “ ■' “ Screw
“ “ Plate for 05002
“ “ “ “ 6,590;5
“ “ “ “ 0,5001
“ “ 0,5905
“ “ “ “ 0,5978
“ “ “ “ 0.5970
“ “ “ “ 0,5080
“ “ “ “ 0,5981
“ “ “ “ 05800
“ “ “ Screw
.....................
....................
.....................
.......................
.....................
.....................
.....................
.....................
......................
.........
“ “ Shank for 0,5902 to 0590,5.. .
“ “ “ “ 05800............
“ “ “ “ 05078 to 0,5981.. .
Prosser Foot coni])lete, for chip line inilaii,
Nos. 5180, 50:S88(;, 01014, 0,5850, 05951,
05958 and two 1172u.................................
Presser Foot complete, forniediuni milan.
Nos. 5180, 50;i88c, 01041, 05850, 05955,
0,5059 and two 1172ii................................
Pre.sser Foot complete, for line canton,
Nos. 5480, ,50:i88r, 01011, 05850, 050,50,
0.5900 and two 1172ii................................
Presser Foot eoin|)lele, for canton, Nos.
5180, 50388c, 01011, 0.5850, 05957,
05901 and two 1172 u................................
Presser loot complete, forwholestniw anil
mackinaw, Nos. 5180, .50388c, 01011,
01014, 05973, 05977 and two 1172u... .
Presser Foot complete, for rough and
leady, -Nos. 5180, 50388c, 01012, tilOll,
0.5971, 05977 and two 1472u
....................
Presser Foot complete, for coarse braid.
Nos. 5180, .50388U, 01013, 01011, 05975,
05977 and two 1172ii.................................
Presser Foot complete, for double cord
edge. Nos. 5180, 50388c, 01013, 01011,
0.5070, 05977 and two 1172it
...................
PARTS FOR MACHINK No. 117-3
NO. I'L.ATE
0,5806 8181
Prosser Foot complete for 61783, Nos.
61722, 65911 and two 1172ii
ClOGl 8189
Olle 8173
574w 8173
L530w 8195
32191
1712c
32192
32193
32101
32105
303u
05807
51515
50030c
51808
133i)
..
01751
22130
05S08
01008
01009
208d 8191
01070 8192
Presser Foot I’osition Pin
“ “ Screw
Pressure Regulating Thumb Screw
“ “ “ “ Lock
Nut
..............................................................
Tension Disc
8191
8195
8191
8191
8191
8191
8195
8101
8191
8191
8191
8191
8191
8191
8192
8192
8192
“ Regulating Thumb Nut
“ Regulator with 32193
“ “ Rushing
“ “ Friction Spring
“ “ Plate
“ “ “ Screw
“ Releasing Disc
“ “ Pin...................................
“ Screw Stud
“ “ “ Roller
“ “ “ Set Screw
“ Spring.....................................................
“ Thread Eyelet.........................................
Thread Carrier.................................................
“ “ Clamping Plate
“ “ “ “ Position
Pin
...............................................................
Thread Carrier Clamping Plate Screw. ..
“ “ Holder with 202n and
N.VME
.....................
...............................
..........................................
................
...................................................
..........................
............................
..........................
......................
................................
......................
.......................................
.............................................
.............................
.......................
...............
19
61669...........................................................
202n 8191
01071 8102
Thread Carrier Holder Clamping Screw..
Thread Carrier Pitman complete. Nos.
1550,1, 1682J, 52869, 52870 and 61673..
01072 8192
100c 8191
52803 8192
50311c 8191
*52801 --------
208k 8191
♦52805
--------
20813 8191
*52800
--------
*52807 --------
01073
------
Thread Carrier Pitman Bull Stud (lower)
U U U U U U
Set Screw
Thread Carrier Pitman Ball Stud (upper)
U U U H ii U
Set Screw
Thread Carrier Pitman Cap (lower)
....................................................
....................................................
.............
“ “ “ “ “ Screw
“ “ “ “ (upper)
“ “ “ “ “ Screw
“ “ “ End Bearing
(lower)
........................................................
Thread Carrier Pitman End Bearing
(upper)
........................................................
Thread Carrier Pitman Head (lower) Nos.
52861, 52866, 61672 and two 208b
...........
.
■20 J'.AKT.S НШ MAC’illNE No. 117-3
.40. MATE NAME
h-i'2'20
------
Thread Гагпег Pitman Head (upper) Nos.
.528()0
------
o28ti5, 52867 and two 208e
'Pliread (’arrier Pitman Head (iipi)er)
......................
5.3226 with 52863......................................
5287t) 81t)2 Tliread Carrier Pitman Hod
....................
UiS2j 8162 “ “ “ “ Nnt (lower).
155t).i 8192 “ ‘‘ “ “ “ (upper)
til671 8lt)2 “ “ Коек Shaft witli 46t)c.. . .
611)75 81t)2 “ “ “ ‘‘ (.’entre
....
1.56(' 8194 “ “ “ “ “ Set
Screw....................................................................
t)1677 8192 d'hread Nipper Body...................................
61678 8192 “ “ “ Collar
)56e 8173 ‘‘ “ “ .Screw
65923 9805 “ “ ('am with two 153c
153c 8194 “ “ “ Set .Screw
61671) 8192 “ “ liyelet
.................
................
...................
.....................
....................................
65869 8190 “ '* lieguhdor and Tension
UeUaiser
....................................................
230\v Slttl Threanl Nipper Regulator and 'Pension
lieli‘as('r Screw
..........................................
65968 9806 Thre;id Nii)per Releaser with 65970.................
65969 t)805 “ ■' “ (.'rank with Kite
161c 9805 " “ “ “ Clanii)ing
Screw..........................................................
1989 9805 Thre))d Ni])per Reloiser Roller
.................
12329 9805 •' “ “ Spring..................
6.5970 9806 “ " “ “ Stud
65971 9806 “ •* “ Stop Lever
.........
............
168c 980() “ “ “ “ “ Screw
51008.A itSOli “ “ Screw....................................
65921 9806 “ “ “ Bushing
....................
124088 9806 “ “ “ “ Spring....
65925 9806 “ “ Stud.......................................
65972 ------ “ “ “ 65925 with 1989,
51110f, 51111F and 65926
51T10f 9806 'Phrea<l Nip])cr Stml Position Screw
65926 <)8t)t) ■' “ “ Roller
........................
................
.........................
51111e 9806 “ “ “ “ Screw..................
65982
------
'Phreail Nipper com|)lete, Nos. 51008a,
65923, 65921, 65972 and 124088
..............
65870 81!)2 Thread Take-up (back)..............................
65871 8492 ‘‘ “ “ Holder with 624c
65872 8192 “ “ “ “ Adjn.sting
Plate with 51869.........................................
51869
--------
'Phread 'Pake-up (back) Holder Adjusting
I’late Holler and Stud
.................................
PAR'PS FOR MACHINE No. 117-3
NO. i'l.ATE NAME
21
898c 8491 'Phread 'Pake-up (back) Holder Adjusting
Plate Screw.................................................
19t)ll 8192 'Phread 'Pake-up (back) Holder Adjusting
Plate Screw Washer
621c 81tll 'Phi'ead 'Pake-up (back) Set Screw
6.5991 9806 “ “ “ Staple
...................................
.....................
...
1319W 8195 “ “ “ “ Screw
61698 8193 “ “ “ “
Washer........................................................
65873 8193 'Phread 'Pake-up (front)
.....................................
12.5631 9806 “ “ “ Arm with 185n..
65875 8493 “ “ “ “ Connecting
Link.............................................................
836k 8195 'Phread Take-up (front) Arm Connecting
lank Hinge Screw
.......................................
65876 8193 'Phread 'Pake-up (front) Arm Hinge Stud
(long)
..........................................................
457c 8194 'Phread 'J’ake-up (front) Arm Hinge Stud
(long) .Set Screw
........................................
125632 9806 'Phread'Pake-up (front) Arm Hinge Stud
(short)
.........................................................
51598c 9806 'Phread 'Pake-up (front) Arm Hinge Stud
(short) Nut
..................................................
185n 8194 'J'hread 'Pake-up (front) Clamping Screw.
64699 8193 “ 'Pube
460c 8191 “ “ Set Screw
65877 8499 'Throat Plate for 64778 and 64779
6.5879 8181 " “ “ 64783
......................................
....................
....................
....................
6.5951 9800 “ “ “ 65941 and 65944......
65995 9803 “ “ Holder with 460c and 125627
65996
------
'Throat Plate Holder 65995 with 665n,
64703 to 64705, 65951 and two 211u...
125634 --------'Throat Plate Holder 65996 with 65987
and 65988
64703 8490 'Throat Plate Holder Cover
...................................................
........................
64728 8490 " “ “ “ for edge stitch
ing
64704 8193 'Throat Plate Holder Cover Hinge Pin. ..
61705 8493 “ “ “ “ Spring
............
665d 8194 “ “ “ “ “ Screw
180i) 8173 “ “ “ Screw
211o 8494 “ “ Screw
..........................................
........................
PARTS FOR MACHINE No. 117-4
23
LIST OF PARTS COMPLETE
FOR
MACHINE No. 117-4
FOR MILLINERY WORK, CONCEALER STITCH. ONE NEEDLE,
ONE HOOK-EYE NEEDLE, POSITIVE SET FOR REGULA
TION OF LENGTH OF STITCH. LENGTH OF STITCH A
TO s INCH. THE MACHINE IS FITTED WITH A THREAD
NIPPER RELEASER AND LOOP SPREADER, ALSO A HINGED
COVER TO THROW BACK, FOR CONVENIENCE OF REACH
ING THE LOWER PARTS OF THE MACHINE.
NO. I'i.A'I'K NA.MIO
*6T7()5
------
Arm, upiier and iowra' (s(ili<!) with (Í1772,
two each SOOldc, (>177;! and four .hOrdSK
C4751 8475 Arm hhid ('over (hack;
219i) 8194 “ “ “ •“ Screw
......................................
....................
C47()() 8475 “ “ “ (front!.....................................
dliOn 8495 “ “ “ “ Screw
....................
,5()(I0:! 8484 “ Oil Tube with 52045.................................
52(415 9804 “ “ “ Packing (fell)..............................
65914 8475 “ Rotiiry Shaft........................................
64505 8176 “ “ “ liuahing (front)
..................
45:ic 8491 “ “ “ “ “ Set
Ser(!w.........................................................
65915 8176 Ann Rotary .Shaft Hiashing (intenneiliate)
Recent ric
...................................................
1299c' 9804 Arm liotary .Shaft Buehiiig (inti'rmediale)
Recent ric Set Screw
..................................
82152 8476 Ann Rotary .Sluift Collar with two 889c.
889c 8494 “ “ “ “ Set .Screw
..........
64507 8475 “ “ “ h'langed liurthitig (liackj
with 61508..................................................
64508 8182 Alan liotary .Shaft Rlanged Hmshing (liacdi)
Oil Rail (bndded cot tom
...........................
159f 8478 Ann liotary Shaft I'danged lin.-liing (back)
.Screw.........................................................
04509 8475 Arm Side Cover
219t) 8494 “ “ “ Screw
...................................................
.....................................
64510 8175 lialance Wheel, 8 in. imlley, with two 448c
448c 8494 “ “ .Set ¡Screw................................
01768 8475 lace I'hde
219d 8494 “ “ Screw
..............................................................
..............................................
64769 8475 Reed Bar...............................................................
04770 8482 “ “ Carrier with 4,58c
............................
NO.
64516 8182
61517 8170
41tic 8194
8404
458c
50012c
04774
921)
04775
217d
64770
1467c
1520IÍ
19021
64521
8170
8498
8476
8494
8195
8476
8195
8476
8494
8476
8194
8495
8476
8476
6 1771
04772
64778
50P2SE
125688
10211) 8478
04777 8170
171c 8173
04528 8470
024c 8491
125029
65986
9804
8499
65987 8409
65988 9800
1867f 9800
65989 9800
65940 9800
65911 9800
05942 9800
05913 9800
05944 9800
04784 8470
50382c 8473
NAME
Feed Bar Carrier Hinge Pin
“ “ “ “ “ Btiahing
............................
.........
“ “ “ “ “ “ Set
Screw
..........................................................
Feed Bar Carrier Hinge Pin Set Screw. ..
“ “ “ Washer
“ “ Cover
“ “ “ Hinge Plate
“ “ “ “ “ Screw
“ “ “ “ Screw
“ “ “ Latch
“ “ “ “ Hinge Screw
“ “ “ “ Spring
“ “ “ “ “ Screw
“ “ Hinge Stud
..................................
...............................................
.............................
...............
.................
..................................
...............
.................
..............
...................................
“ “ “ “ Cap Screw..............
“ “ “ “ Nut
“ “ “ “ “ Washer
“ “ Lifting Link with 624c
...................
...............
....................
“ “ “ “ 04521 with 830f,
10211), 51598c, 04530, 05875, 65876,
05893, 125631 and 125032
Feed Bar Lifting Link Cap Screw
“ “ “ “ Guide
“ “ “ “ “ Screw
“ “ “ Hinge Stud
........................
..................
......................
..........
.................
“ “ “ “ “ “ Set
Screw
..........................................................
Feed B;ir Shim Washer
..................................
Feud Dog (coarse) 7 teeth (10) 2 teeth to
the inch) for felt hat work...........................
Feed Dog (fine) 10 teeth (14 teeth to the
inch) for felt hat work...,.............................
h’eed Dog Plate with two 65940, for 05941
“ “ “ Screw
“ “ “ Holder for 05941
“ “ S[)ur for 05938 and 65942
......................................
................
..............
Feed Dog (coarse) 7 teeth (10)/^ teeth to
the inch) complete, for straw hat work,
Nos. 1367e, 05938 and 65939....................
Feed Dog Plate with two 65940, for 65944
“ “ “ Holder for 65944
................
Feed Dog (fine) 9 teeth (14 teeth to the
inch) coni|)lete, for straw hat work, Nos.
1367k, 65942 and 05943
Feed Dog Carrier
............................................
“ “ “ Regulating Screw
...........................
.................
21 PAKTS FOR МЛСП1\Ч<: No. П7-1
PARTS FOR MACHINE No. 117-1 25
NO. 1'1,.ЛТЕ NA.MK
‘JiMic 8173 I'ecil Dog ('anii*r Screw
65915 9801 “ “ Wa.slier
..................................
..........................
65952 9806 ■“ ‘‘ Packing .005 lliick..........................
6,5953 9806 ■“ “ .015 thick
238i) 9801 " " “ Screw
.......................
..............................
50.383c 8195 " “ Screw...............................................
61787 8176 “ Iviceiitric with two 153c
153c 8191 ‘‘ '■ Set Screw
..........................
...................................
61788 819t) Feed F'orked ronnectum with two each
50623E, 5tXi2lK au<l 61791
.....................
61789 8183 Feed I'orked (.ioniicctioii Hinge Stud...............
61790 8183 “ ■“ “ “ Bush
ing tcccentric).............................................
1167c 8191 Feed Forked Connection Hinge Stud Cap
Scr(‘W........................................................
1517e 8195 Feed Forkeit ConiuMdiou Hinge Stud Nut
61791 8183 “ " Wearing Plate
50623E 8191
Screw (long)
...............................................
50621e 8191 Feed Forked Connection tVearing Plate
Screw' (short)
.......................................... .
01533 8183 Feed Lifting Flcccntric with two 453o.. . .
61792 818.3 “ ■' “ (.’onneclion with
1)1535 and tw'o 890e
.................................
65893 ------Feed Lifting Ficceidric Connection 61792
with 61533..................................................
*61535
-------
Feed lifting Flecentric Connection Cap
896e 8191
Screw..........................................................
61536 8183 Feed lifting Kccentric Connection Stud
61537 8183
Bu.shing
.....................................................
116c 8191 Feeil Lifting F.ccentric Connection Stud
Bushing Set Screw
.....................................
15:ic 8191 Feed lifting Flccentric Set Screw.......................
61793 8182 " Regulator witli 1253c, 2019 and
6.5801.........................................................
61791 8183 Feed Regidator Connecting Link
.........................
5t)625c 8195 “ “ “ Hinge
Screw..........................................................
1636e 8195 Feed Regulator Connecting Link Hinge
Screw Nut...................................................
61795 8183 Feed Regulator Connecting Link Hinge
Screw Washer.............................................
61796 8183 Feed Regulator Handle......................................
2532 8183 “ “ “ Position Pin................
NO.
04797
PLATE
8483
F’eed Regulator
NAME
Handle Position Plate
with 125630..
399w 8495
Feed Regulator
Handle Position Plate
Screw..............
125630 9800
Feed Regulator
Handle Position Plate
Thread Guido
64798
8483
F'eed Regulator
Handle Relea.sing Lever
with 223i).. . .
64799
223n
9804
Hinge Pin
..........................................
Feed Regulator Handle Releasing Lever
:. . ..
F^ecd Regulator Handle Releasing Lever
8483
Hinge Pin Set Screw...................................
8483 F^eed Regidator
65913
8183
61800
8491
1253c
1518E
2019
65801
8195
8495
8183
8484
50626(;
65802 8184
8494
8494
102t)i)
8181
65803
690d 8473
1627n
8495
65909 8481
61717
8484
217t) 8494
6.5910
--------
117x7
--------
H i(
(i U
i( a
it и
a ({
и и
t( и
i( i(
и и
и и
i< (<
(i и
Guide
..................
Handle Spring
“ Stud with 2532..
“ “ Set Screw.
Hinge Screw.......................
“ “ Nut
Pin
......................................
Shaft
...................................
“ Bushing
“ “ Set Screw.
“ Cap Screw
Stop.....................................
“ Screw
“ “ Nut
“ Holder...
“ Screw'.. . .
Guiile, for edge stitching, Nos. 61717,
65909 and tw'o 217u
...................................
Hook...................................................................
....................
..............................
.........................
.....................
.............................
...............................
65801 8484 “ Guard........................................................
175e 8473 “ “ Screw
65984 98t)4 Loop Spreader, for straw hats
65985 9804 “ “ “ millinery work
65986 9806 “ “ Driving Lever
125626 9804 “ “ “ “ Shim
............................................
...........................
..............
.....................
..........
65987 9804 “ “ and Driving Lever Holder
65988 9804 “ “ “ “ “ “
*125627
------
Loop Spreader and Driving Lever Holder
Hinge Pin Block
Hinge Pin
....................................................
.........................................
460c 8494 Loop Spreader and Driving Lever Holder
Hinge Pin Set Screw...................................
501 17d 9804 Loop Spreader Driving Lever Screw
................
51875 9804 “ “ “ “ Roller and
Stud.............................................................
Loading...