How it Works
SINGER
Loading...
116-1
User Manual
20 pgs1.2 Mb0
User Manual
20 pgs2.1 Mb0
User Manual
41 pgs6.77 Mb0

SINGER 116-1 User Manual

Form 8853 Ai'Kil, 1922
LIST
OF
PARTS
8853—1
MACHINE No. 116-1
THE SINGER MANUFACTURING COMPANY
All Rights Reserved for all Countries
INDEX
Page
Accessohiks.................................................................................... 12
Bobbin Winder............................................................................... 12
Foot Lifter Parts.......................................................................... 13
Iron Base......................................................................................... 12
Knee Lifter Parts.......................................................................... 14
Machine No. 116-1....................................................................................... 7
Numerical List of Part.s............................................................. 17
Obsolete Parts.............................................................................. 15
Thread Unwinder.......................................................................... 14
INSTRUCTIONS FOR ORDERING
LIST OF PARTS COMPLETE
In ordering from this list, use ONLY the part NUMBER
in the FIRST column.
The number stamped on a Sewing Machine part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific number, which, although not stamped on the parts, must be used when ordering the combination.
Each number always indicates the SAME PART in whatevei list it appears, or for whatever machine.
The letters after some of the numbers indicate thd style of finish only, as follows;
A. Hardened, Polished and Plated.
Polished and Plated
B.
Hardened only.
C.
Polished only.
D.
Soft, not Polished.
E.
Hardened and Polished.
F. G. H.
Blued. Plated only.
J. K.
Hardened and Plated. Brass or Gilt.
L.
Oxidized.
M.
Japanned.
P
R.
Parkerized
These letters MUST BE USED when they appear in the list, and AI'TER the number as in the list.
In this series
1 to 1500 and 50001 to 51500 are Screw Numbers. 1501 to 1800 are Nut Numbers. 1801 to 2000 are Roller Numbers. 2001 to 50000 and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
FOR
MACHINE No. 116-1
FOR SNAPPING THE ENDS OF BINDING, TO 1M INCHES
WIDE, ON BRIMS OF SOFT FELT HATS. HAS WORK CLAMP AUTOMATICALLY OPERATED BY A BELL CRANK RE CEIVING ITS MOTION FROM A CAM ON THE UNDER SIDE OF THE BED. STITCH ADJUSTABLE FROM SEVEN TO TWENTY TQ THE INCH. REGULARLY FITTED WITH AN IRON BASE.
PLATE
NO. 12r>00l 125002
12.5003 8525
*03501
—
8534
2002
1:18e 853:i
8525
15108
4350
8533
llln 8533
15100 852.5
280i) 8534
124 03
8520
8870
8530
2138 8520
8533
448c
— 03502 8527 03503 8527
8527
03501 03505 8527
735c 8533
210n 8.533
20:!n ,853.3
8.525
03500
8527 “ Cap..................................................
03507
21 On 8.533
03.508 8525
OOOn
8534
Arm
12,5001 with 43.5c, 448c, 15486 and
1.5408.............................................................
Arm Dowel Pin..................................................
U
Screw.........................................................
U
Shaft..........................................................
U
“ Bushing
U
“ “ Set Screw
li
“ Screw
U
Side Cover
“ “ Thumb Screw
U
Spool Pin and Thread Eyelet
«
“ “ Washer (cloth)
Balance Wheel (power) light rim, 3 in.
pulley, with two 448c Balance Wheel Set Screw Bed
Clamp Arm........................................................
U
ii U
U
i<
u
Carrier with 51815
n
NAME
..............................................
........................................
.................................................
................................................
..................................
.................
...............................
....................................
.................................
“ Bracket “ Hinge Block with 735c
“ “ “ Pin.............................................
“ “ “ “ Set Screw.. “ “ “ Screw
“ Screw..............................
“ “ Screw
“ Lever...............................................
“ “ Hinge Screw
...........................................
..................
........................................
................
..............................
...........................................
................................
.
8 PAlíTS FOR MAOIllNF No. 116-1
PARTS FOR MACHINE No. 116-1
NO. I'l.ATF, NAMF
OH.'lOO 8,527 Clamp (’airier Rei'ulator with 238e and
1877...............................................................
.5‘2877i- 8527 ('lamp C'arrier Regulator Hinge Stud
...........
■1-180 8.5:i;s “ “ “ “ “Set Screw
.............................................................
1877 8.533 Clump ('an ier Hegidaior Roller and Screw
Stud................................................................
l23t)o 8.527 ('lamp ('anier Regulator Screw Stud
............
7(170 8,527 “ “ “ “ “ Sleeve
16,58.1 8,527 “ “ “ “ “ 'I'lumib
Nut
.................................................................
63.510 .8527 Clamp Carrier Regulator Slide Block 238k 8533 “ “ “ Stop Screw
.................
..................
5181.5 8533 “ “ Roller and Screw Stud... .
63511 8,527 “ Check....................................................
,50335i) .8.533 “ “ Hinge Screw
...........................
63512 8.527 “ Ri'e,s.sure Arm.....................................
203l) 8533 “ “ “ Screw..............................
,51816 8533 “ “ Roller and Stud
...................
63513 8527 “ “ “ Bracket with 453c
and 51816.......................................................
-153c 8.533 Cliunp l're,s,sure Roller Bracket Set Screw
63514 8527 “ Spring
...................................................
2811 8.526 Crank Connecting Rod with 2812 and two
1,58k..............................................................
*2812
------
Crank Connecting Rod Cap
;.58k 8.533 “ “ “ “ Screw
375o 8534 “ “ “ Hinge Screw
...............................
................
..............
1518k 8533 “ “ “ “ “ Nut.
2866 8526 Face Plate..............................................................
63.515
---------
Face Plate complete, N03. 448c, 400c,
600c, 1.560c, 2103, 2105, 2107, 2111, 2127, 2260, 2866, 2870, .55045 and two
each 233u and 2102.......................................
2107 8,52(1 Face Plate Thread < iuard
233n .8533 “ “ “ “ Screw
................................
......................
lOOn 8,533 “ “ Screw.................................................
2030 8528 Feed Coumading Link
378c 8534 “ “ “ Hinge Screw
.........................................
................
1,52(Ik .8.533 “ “ “ “ “ Nut..
17012 8528 “ F.ceeiitric with 448c.....................................
•118(; 8.533 “ “ Set Siu'cw
..............................
63516 8526 “ Forked Connect ion....................................
378c 8534 “ “ “ Hinge Screw. . .
15'2()K 8.533 “ “ “ “ “ Nut
63517 8.528 “ Regulator
503.53k 8,531 “ “ Hinge Screw
................................................
.................................
'. .
NO. I'l.ATB NAME
8217 8527 Feed Regulator Hinge Screw Friction
Washer
..........................................................
747n 8,534 Feed Regulator Thumb Screw.............................
63518 8.5'28 “ Rock Shaft...................................................
63519
------
Feed Rock Shaft complete. Nos. 63518
and 63.5‘20....................................................
63.520 8528 Feed Rock Sliaft Crank ^ith 157b
......................
157e 8533 “ “ “ “ Clamping Screw.
307c 8.534 “ “ “ Screw Centre
1513J 8,533 “ “ “ “ “ Nut
.....................
.................
63.521 8,525 “ Wheel...........................................
63.522 8,528 “ “ Driving Imver
63.523 8528 “ “ “ “ Block
...............
.....................
63524 8528 “ “ “ “ “ Cap
2.37n 8533 “ “ “
SiU’C'w..........................................................
6352,5 8528 I'eed Wheel Driving Lever Block Spring
234n 8533
Screw..............................................................
63.526 8528 Feed Wheel Driving Lever Link
.........
870k 8534 “ “ “ “ “ Hinge
Screw for 63522
............................................
50336f 8534 Feed Wheel Driving Lever Link Hinge
Screw for 63518.............................................
1,521e 8533 Feed Wheel Driving Lever Link Hinge
50337c 8,534 ITed Wheel Hinge Screw
Screw Nut for 50336
1518k 8,533 “ “ “ “ Nut
.....................................
......................................
.......................
•2718 8533 “ “ “ “ “ Washer. . .
63.527 8528 “ “ Retaining (^lutch
............................
63528 8,528 “ “ “ “ Bracket
I8O1) 8533 “ “ “ “ “
Serciw
............................................................
635‘29 8528 Feed Wlieel Retaining Clutch Cap......................
lOOn 8533 “ “ “ “ “ Screw.
63530 8528 “ “ “ “ Spring
220u 8,533 “ “ “ “ “ Screw
63531 8.528 Guide
.........................................
...........................
1200c 8.533 “ Screw.........................................................
‘23390 8.533 “ “ Washer
....................................
20,50 8525 Needle Bar......................................................
1,5218 8,520 “ “ Connecting Link with 930e . .
030k 8.534 “ “ “ “ Adjusting
Screw..............................................................
570c 8,533 Neecile Bar Connecting Link Hinge Screw
1520k 8.533 “ “ “
Nut...................................................
..
...
10
NO. l’I..\Tl'; N.\MF,
I’AKTS FOR MiVCIIINF No. llG-1
llO,')^ Needle Bill'Connecting iStiid with 1..
irCx; “ “ “ “ Set Screw,.
2i)(ln 8,5H:i “ “ Screw B\isliing
................................
l.oOliS 8529 “ “ Thread Guard.................................
25If 8.5H:i “ “ “ “ Screw.....................
1.50()9 8,529 “ Clamp with 216f.......................................
21()F 85:i:i “ “ Screw............................................
Г)3582 8525 0,sciHating Hock Shaft with 4784
:i0,52 8,529 “ “ “ Hinge I’m
......................
............
1.5hi,I 8.5:« “ “ “ “ “ Nnt... («,5c 8.529 “ “ “ “ “ Screw
Bearing..........................................................
15h?j ,458:! Oscillating Hock Shaft llingii Tin Screw
B<‘aring Nnt.................................................
4781 8.5:i2 Oscillating Rock Shaft Oil f’ad (felt). . , .
t«,5:« 8.525 “ Shaft
I,542(i 8,529 “ “ Crank 15Ui5
--------
Oscillating Shaft Crank complete, Nos,
1.519F, 15171, 1,542() and two 41)2с
2049 8529
Oscillating Shaft Crank Bin
4(i2c; 8,5:!3 15170 8,529
2291) 853:i
.......................................................
.....................................
-------
............................
“ “ “ Set Screw “ “ “ Slide Block
...................
.............
“ “ “ “ “ C a p
Scri'w.............................................................
12421 .8.529
Oscillating Shaft Crank Slide Block Cap
Screw Washer...............................................
Hi:i.5c; .852!)
Oscillating Shaft Crank Slide Block Screw
Stud................................................................
1519I0 8.5:i3
15171
Oscillating Shaft Crank Slide Block Screw
------
Stud Nut
Oscillating Shaft Crank Slide Block com
........................................................
plete, Nos. 229i), 1035c;, 12424 and 15170
852,5 Bresser Bar..........................................................
(«,534
8.529 “ “ hitter
20()2
8529 “ “ “ Hinge Stud.......................
1,54,80
S,5:!;i “ “ “ “ “ Set Screw.
448c
8529 “ “ Lifting Bracket with 4.53c;. . .
2952
85:i3 “ “ “ “ Set Screw. . .
.15:ic;
S,5:i:i “ “ Screw Bushing
2!)0ь:
8.529 “ “ Siiring
2:i08
8529 “ “ “ Washer
207(1
8.52il Bressure Regulating'ПттЬ .Screw
2(i:i.i
85:ill SImtth; Bolihin....................................................
299()
8.5:i(l “ “ Case Latch
15140
S,5:i() “ “ “ “ Lc;ver
2973
У5,{() “ “ “ “ “ Fulcrum
2974
...........................................
............................
..........................................
........................
....................
..........................
.............
Bin.................................................................
BARTS FOR MACHINE No. 116-1 11
NO. ri.ATK NAME
2975 8.530 Shuttle Bohhin Case Latch Spring
........................
592k 8530 “ “ “ “ Stop Screw...
15141
-------------
“ “ “ Hinge, Nos. 2973,
2974 and 15140..............................................
75.53 8530 Shuttle Bobbin Case Bosition Finger.....................
2,523 8.530 “ “ “ “ “ Rivet
15727 8530 Shuttle Bobbin Case complete, Nos. 591f,
.592e, 2.523, 2975, 7553, 15098 and 15141
2515 8.530 Shuttle Body.............................................................
591f 8530 “ Tension Regulating Screw
.......................
1.5098 8.530 “ “ S])ring..................................
63535
-----
Shuttle, Ijl in. diain.. Nos. 2515, 2996
and 1.5727......................................................
*2,542
--------
Shuttle Drivc'r
.....................................................
2441 8.532 “ “ 2542 with two 462c................
2049 8529 “ “ Bin.........................................
402c 8533 “ “ Set Screw.....................................
63.530 8531 “ Race Back 2,532 8.531 “ “ “ Position Pin
..........................................
........................
2533 8531 “ “ “ Spring.................................
048j 8,534 “ “ “ “ Screw
(«,537 8.531 “ ^ “ Body
...........................................
......................
03.538 8531 “ ' “ Cap.............................................
335d 8531 “ “ “ Screw
63.539
-------------
“ “ Cover..........................................
...................................
03540 8530 “ “ “ 63539 with 63541 and
two 26092.......................................................
03541
------
Shuttle Race Cover Bracket
................................
21510 8.5:i0 “ “ “ “ Hinge Pin... 20092 8530 “ “ “ “ Rivet 03542 8.530 “ “ “ Spring
330d 8,5,30 “ “ “ “ Screw 145u 8.533 “ “ Screw
03543
------
Shuttle Race complete. Nos. 330n, 648j,
................................
....................
.........................................
2533, 21516, 63530 to 63538, 63540, 03542 and two each 335d and 2532, ,..
2102 8,532 Tension Disc
.........................................................
1500c 8.532 “ Regulating Thumb .Nut...........................
2870 8.532 “ Releaser..............................................
2209 8532 “ “ Hinge Pin
.............................
000c 8532 “ Screw Stud................................................
448c 8.533 “ “ “ Set Screw
2103 8532 “ S[)ring 2105 8.532 “ Thread Guard
................................................
......................................
2112 8532 Thread Retaining Disc with 2113
.........................
..
........................
2113 8532 “ “ “ Steady Ihn..................
2114 8532 “ “ Spring
S8.')3-2
.......................................
...
12
PARTS I'OR MA('HINK No. IKi-l
HOUR IN WINDER
13
N'O. PI.ATE NAME
2115 8532 Tlii'naU Retaining Stiul
.....................................
4l)0c 8532 “ “ “ Set Scnnv............
2111
------
'rhreud Retainer Onide eomplete, Nos.
2112, 2111 and 2115
15275 8525 Thread'Гаке-ni) Cam witli 1293c
.....................................
......................
12i)3c 8531 “ “ “ Position Screw... .
15191 8532 “ “ ],ever with 1822
50527c 8531 “ “ “ Hinge Screw
........
.........
1822 8533 “ “ “ Roller and Stnd. .
55015 8532 “ “ Spring
................
2127 8532 “ “ “ Regnlator Plate
233n 8533
Adjusting Screw
.......................................
IRON BASE
NO.
21788
2976
418c
111)08 ()50d 8531
63511
63515
PLATE
Bed Frame Cushion (leather)
8531 8530
8534
“ “ Hinge Connection.....................................
“ “ “ ‘‘ S(it Screw
8533
“ “ “ “ Pin........................................................
“ “ Thumb Screw
Bed к’гаше with 650n, 63.545, two eaidi
8535
2976, 14008 and four each 21788 and
wood .screws 1)4 in. No. 12..........................
8535 Drip Pan
............................................................
NAME
..........................
...........................................
ACCESSORIES
PI.ATE
NO.
.5901
36578
5901
36579
26026
5901 5901
120117
20185 5901
19079
8909
8908
Oiler (copper ¡¡latcd) with 36579
“ SjKHit, '¿'/2 in. long, with 120117.. . .
“ “ Washer (leather)
Screw Driver (machine)...................................
“ “ (shuttle tension)
Wrench for 1209...............................................
8526 5901 5901
“ “ 1519 and 1520........................................
NAME
.....................................
.....................................
“ 1513 and 1518
....................
...............................
BOBBIN WINDER
SWINGING AUTOMATIC, RIGHT HAND
PI.ATE
NO.
L5072
1117
8530
27510
27302 1117
Ba.se.............................
PosiUou Pin.
I^'niinc
........................
NAM
NO.
50350n
1620J 27303 27511
27538
27301) 27307 27308
plate
8531
Frame Hinge Screw 8533 8532
1117
1417 1117 1417 1117
“ “ “ Nut
“ Spring
Pulley.................................................................
Spindle with 15072............................................
S))ool Pin
“ Stand...........................................................
Spool Stand complete, Nos. 418e, 15C2j,
NAME
..........................................
.....................................
........................................................
...........................................................
2106, 10141, 11241, 27306, 27307 and two each 2455 and wood screws 1 in.
No. 10.............................................................
11211
1417
27312
35n
2155
1502j
418e
10141
2101)
27017
Spool Washer (cloth)
1417
Stop Latch
8534 8532
“ “ Hinge Screw.....................
Tension Disc
8533 8532 8532
8532
1117
.........................................................
“ Regulating Thumb Nut
“ Screw Stud
“ Spring
.......................................................
“ Thread Guide...........................................
Hobbin Wimler, Nos. 35d, 1620j, 27302,
....
....................................
..
......................................................
...........................
...............................................
27303, 27312, 27538, 27540, 27541,
50350d and two wood screws 1 in. No. 7
27511
Bobbin Winder (swinging automatic, right
hand) complete. Nos. 27308 and 27647
FOOT LIFTER PARTS
NO. PLATE NAME
5070
---------
Chain, length 26 in. to 35 in., with 56864
and 56865.......................,
Note : When orderi ng No. 5670, give length required.
4879 8536 Chain Connecting Link............................................
56861 8526 “ Hook (large)................................................
56865 8530 “ “ (small)
.............................................
2775 8536 Lifting Lover.............................................................
802i) 8531 “ “ Hinge Screw
2763 8536 Rock Shaft..........................................■
6331 8536 “ “ Hanger with two wood screws
1 in. No. 10
....................................................
6337 8536 Rook Shaft Lifting Bracket with two 356c.
12213 8536 “ “ “ “ Hook for 27V5.
635.53 8536 “ “ “ “ “ “ 5670. 356c 8533 “ “ “ “ “ Set Screw 356c 8533 “ “ “ “ Set Screw
2770 8536 “ “ Stop Dog with 356c
3.56c 8.533 “ “ “ “ Sot Screw
..............................
.................................
....................
..........
.......................
.......................
Loading...
+ 14 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use