SINGER 115-1 User Manual
Form 8627
Beptsubeb, 1919
PRICE LIST
OF
PARTS
MACHINES
Nos. 115-1 and 115-2
THE SINGER MANUFACTURING COMPANY
CoPYKiGHT, U.S. A., 1919, BY The Singeh Manufacturing Co.
All Rights Reserved fob All Countries.
INDEX
PAGE
Accessories......................................................................................... 12
Attachment Set................................................................................. 13
“ “ Style No. 14..................................................... 12
Bobbin Winders................................................................................ 15'
Edge Stitcher..................................................................................... 13
Hand Attachment
IIemmers............................................................................................... 13
Hemstitchbr........................................................................................ 14
Machine No. 115-1................................................................................ 7
“ “ 115-2............................................................................... 11
Numerical List of Parts.................................................................. 31
Obsolete P.arts.................................................................................. 28
Prebber Feet....................................................................................... 14
Stand (Cabinet Table). .. . ;...................................................... 19
“ (Cover Set)................................................................................... 17
Trimmings for Cabinet Table
“ “ Cover Set.............................................................. 20
“ “ Drawing Room Cabinet..................................... 22
“ “ Open-Side Drawing Room Cabinet
“ “ Portable Case
Tuck Folder........................................................................................ 14
.............................................................................
........................................................
...............
.....................................................
16
21
25
27
Jfi'-
INSTRUCTIONS FOR ORDERING
LIST OF PARTS COMPLETE
FOR
In ordering from this list, use ONLY the part NUMBER
in the FIRST column.
The number stamped on a Sewing Machine part is in every
case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the SAME PART in whatever
list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of
finish only, as follows;
A. Hardened, Polished and Plated.
Polished and Plated
B.
Hardened only.
c.
Polished only.
D.
Soft, not Polished.
E.
Hardened and Polished.
F.
G.
Blued.
H.
Plated only.
J.
Hardened and Plated.
K.
Brass or Gilt.
L.
M.
Oxidized.
Japanned.
P.
Parkerized.
R.
These letters MUST BE USED when they appear in the list,
and AFTER the number as in the list.
In this series
1 to 1500 and 50001 to 51500 are Screw Numbers.
1501 to 1800 are Nut Numbers.
1801 to 2000 are Roller Numbers.
2001 to 50000 and 52001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
MACHINE No. 115-1
FOR FAMILY USE, ROTARY HOOK, H. 0.
NO. PLATE NAME
*55601
--------- Arm with 450c, 2006 and 2803
2002 6307 “ Dowel Pin
138e 6308 “ Screw
55602 6300 “ Shaft............................................................
2006 6302 “ “ Bushing (back)..............................
450c 6302 “ “ “ “ Set Screw
♦2803
--------
“ “ “ (front)
55513 4917 “ Side Cover...................................................
286b 6308 “ “ “ Thumbscrew
2007 6307 “ Spool Pin
8879 6307 “ “ “ Washer (cloth)
15282 6300 Balance Wheel, 21^ in. pulley....................................
*55003
--------
Bed...........................................................................
5.5604
--------
55605 6301 Bed Slide complete, Nos. 2824, 55604 and
2824 6307 Bed Slide Spring.........................................................
502 16j 6307 “ “ “ Screw........................................
256b 6301 Clamp Stop Motion Clamp Screw
248a 6307 “ “ “ “ Stop Screw. .
2020 6301 “ “ “ “ Washer
*15312
15313 6301 “ “ “ “ “ 15312
2022 6307 Clamp Stop Motion Flanged Bushing
4G2c 6306 Clamp Stop Motion Flanged Bushing
15314
55606 6300 Crank Connecting Rod with 1994, 55607
*55607
1057e 6302 “ “ “ “ Screw
1994 6302 “ “ , “ Roller and Stud..
55608 6302 “ “ “ Slide Block.......
55609 6302 “ “ “ “ “ Hinge
“ Slide.....................................................................
two 50216J
---------
“ “ “ Flanged Bushing....
with two 462c..................................................
Pin
------
---
------ Crank Connecting Rod Cap
Set Screw
Clamp Stop Motion complete. Nos. 248a,
256b, 2020 and 15313
and two 1057e.................................................
Pin...................................................................
......................................................
..........................................................
................................................
............................)........................
..................................................................
........................................................
..............................
-------
.............................
..............................
...........................
...........................
.....
....................................
...................................
................
TAR'rS FOR MACHINE NO. 115-1
PARTS FOR MACHINE NO. 115-1
9
.NO. rl.ATE NAME EACH
118c B:!02 Crank Connecting Rod Slide Block Hinge
Pin Set Screw
* 1.') 1Ш)
-----
Face Plato...............................................................
*15107 - — “ “ 15406 with 15428
.................................................
......................
1,5 i:(2 1017 “ “ 15407 with 857b, 2827, 15410,
15412 and 50292n......................................
1,5108 -------- Face Plate Tension Seat
1.5428
.55614
-------------
------
“ “ “ “ 15408 with 15395.
Face Plate complete. Nos. 1560u, 13710,
.........................................
15238, 15432, 32572, 50291b, 55645 and
two 2102.........................................................
190j 6302 i’ace Plate Screw......................................................
2827 6307 “ “ Thread Guard with 8505
......
8505 6307 “ “ “ “ Rivet. . .per 100
.55649
--------
.5.5611 6302 “ “ 55649 with 50014c
Feed Bar..................................................................
..............................
55612 6302 “ “ Hinge Pin.......................
50014c 6302 “ “ “ “ Set Screw.........................
.55613 6302 “ “ Spring
lOOn 6302 “ “ “ Screw
7071 6302 “ “ “ “ Washer
.55614 6302 “ “ Wearing Plate
...................................................
........................................
.........................
....
50149e 6302 “ “ “ “ Adjusting Screw.
233j 6)302 “ “ “ “ Screw
15359 6304 “ Cover Plate, for art work
..............................
........
.5.5615 6303 “ Dog...............................................................
50117k 1)308 “ “ Screw....................................................
.55616 6301 “ Forked Connection with 175j
....
175.1 6)308 “ “ “ Adjusting Screw
1381k 6308 “ “
..............................
centric)
..........................................................
Hinge Screw (ec
1.520.I 6305 Feed Forked ('onnection Hinge Screw Nut
1832 6308 “ “ “ Roller and Screw
Stud
................................................................
2044 6,302 Feed Regulator......................................................
8217 4918 “ “ Friction Washer.............................
,50353k 4918 “ “ Hinge Screw..........................
747ii 6302 “ “ Thumbscrew..........................
5.5617 6301 “ Rock Shaft..............................................
307c 6308 “ “ “ Screw Centre
.56811
--------------
“ “ “ “ “ 307c with
......................
1513J..............................................................
1513.] 6308 Feed Rock Shaft Screw Centre Nut
5.5618 6301 Needle Bar
.............................................................
........................
1.5248 6305 “ “ Connecting Link with 930e . .
930k 6305 “ “ “ “ Adjusting
Screw..............................................................
NO. MATE NAME
570c 6305 Needle Bar Connecting Link Hinge Screw
1520J 6305 “ “
Nut..................................................................
2052 6305
1,55c 6305
55619 6305
251a 6305
55620 630.5
552c 6305
Needle Bar Connecting Stud with 155c . .
“ “ “ “ Set Screw.. .
“ “ Thread Guard
...................................
“ “ “ “ Screw.......................
“ Clam]) witli 552c........................................
“ “ d'hurnb Screw
...............................
15257 6301 Pre.sser Bar.
55621 6305
1058c 6305
1520e 6305
8399 6301
2068 6305
453c 6305
2070 6305
15281 6303
286b 6308
“ “ 'rhumb Screw
Lifter.
Screw.
Nut.
Spring.
Bracket with 453c....
“ Set Screw....
Washer.............................
Foot.
.................................
. 263u 6308 Pressure Regulating Thumb Screw..........................
55622 6306 Rotating Hook with 462c, 50150c, 55633
55640
and two 50151d
---------
Rotating Hook 55622 with 55629 and
55651
..............................................................
..............................................
5,5623 6306 Rotating Hook Bobbin............................................
55624 6306 “ “ “ Case Latch
55625 6306 “ “ “ “ “ Lever
2974 6306
Fulcrum Pin.......................................per 100
2975 6306 Rotating Hook Bobbin Case Latch Spring
592e 6306 “ “ “ “Stop
Screw
55626
------
Rotating Hook Bobbin Case Hinge, Nos.
..............................................................
2974, 5.5624 and 55625
.................................
,52364 6306 Rotating Hook Bobbin Case Delivery Eye
'Phread Guard
.................................................
52342 6306 Rotating Hook Bobbin Case Delivery Eye
'Phread Guard Rivet........................................
55629 6306 Rotating Hook Bobbin Case Holder
55630 6306 “ “ “ “ “ Position
Bracket............................................................
704j 6306 Rotating Hook Bobbin Case Holder
Position Bracket Screw
..................................
50093 k 6306 Rotating Hook Bobbin Case Tension
Regulating Screw............................................
52343 6306 Rotating Hook Bobbin Case Tension
Spring
.........................................................
'. .
EACH
...
...
10
PARTS FOR MACHINE NO. 115 1
11
NO. PLATE
Rotating Hook Bol)bin Case Tension
6306
13801)
55651 6306
50150c
55633
5015In
55631
55635
32572
6306
6306
6306
6301)
4620
6301
6306
791 к 6306
6306
4G2k:
6307 'J'plisioil Disc......................................................
2102
1560U 6307
6307 “ Releasing Disc
15238 0307
4918
5029lE
15410 4918
50292b 4918
6307
13710
4918
15395
6307
26075
6300
55636
6308
1293c
6302
448c
6305
15071
6305
79c
0305
1822
857b 4918
15280
691a 6308
4018
4918
6303
55645
15412
S])rlng Screw..................................................
Rotating Hook Bol)bin Case complete.
Nos. 592ii, 13801), 2975, 50093f, 52313,
52364, 55626 and two 52342
Rulating Hook I’osition Screw
“ “ Section...................................................
“ “ “ Screw
“ “ Set Screw...............................................
“ “ Shaft.......................................................
“ “ “ Crank with 462k
and 791k.........................................................
Rotating Hook Sliaft Crank Po.sition
Screw..............................................................
Rotating Hook Sliaft Crank Set Screw.. .
“ Regulating 4’luiml) Nut.............................
“ “ Pin...........................................................
“ Stud............................................................
“ “ Bushing
“ “ Set Screw
“ Spring.........................................................
“ 'Idiread Guard
'I'liread Gutter ami Holder
“ 4'ake-ui) with 4-18c and
1293c..............................................................
d'liread Take-U{) ('am Position Screw. . . .
“ “ “ Set Screw..............................................
“ “ I.ever with 1822
“ “ “ Hinge Screw
“ “ “ Roller and (Stud...
“ “ ,S])ring.....................................................
“ “ “ Regulator
“ “ “ “ Set Screw
Tliroat Plate for 55615........................................
“ “ Serew
NAME
..................................................
...........................................
...................................................
................................................
............................................
..................................
......................................
.........................................
..............................................
.......................................................
.........................
...........................
MACHINE No. 115-2
FOR FAMILY USE, ROTARY HOOK, H. 0.
This Machine is the same as No. 115-1 with the addition
of the following:
HAND ATTACHMENT PARTS
NO. PLATE NAME BACH
*94002 4915 Body............................................................................
33647 4915 “ Bracket..........................................................
183e 4916 “ “ Screw
80023 4915 Crank Handle (wood)...................................
94012 4915 “ “ Spindle...................................
8280 4916 “ Hinge Pin.....................................................
8435n 4915 “ Lever............................................................
8281 4916 “ Lock Pin
8282 4916 “ “ “ Spring
94005b
-------
Crank complete. Nos. 8435b, 80023 and
94012
..............................................................
94006b 4916 Driver........................................................................
33643b
-------- “ Finger..............................................,
94007b 4916 “ “ 33643b with 8390, 8391 and
94009
..............................................................
80018 4916 Driver Finger Hinge Pin
94008 4916 “ “ Lock Pin
8388 4916 “ “ “ “ Spring
94009 4916 “ “ Sheath (leather)........................
8390 4916 “ “ “ Plate. .. (
8391 4916 “ “ “ Staple
94010 4915 Gear with 8281 and 8^82
94011 4915 “ Cover
211a 4916 “ “ Screw
SS380I) 4916 “ Screw Stud........................
80027 4916 Pinion......................................................................
80028 4916 “ Dowel Pin
SS381I) 4916 “ Screw Stud
94001b
--------
Hand Attachment complete. Nos. 137b,
SS380d, SS381d, 8280, 8388, 33647,
80018, 80027; 80028, 94002, 94005b to
94007b, 94008, 94010, 94011 and two
each 183e and 211a
137b 4916 Hand Attachment Screw
..............................................
......................................................
......................................
....................
.............................................
.........................................
.........................
.......................
...........................
........................................
............................
..........................
......................................
..................................................
........................................
..........................................
per 100
12
13
ACCESSORIES
I'LATE
NO.
36569 6315
--
36570
6315
36571
6317
36807
Oiler with 36571.................................................
-
“ 36569, filled with oil.....................................
“ Spout, 1% in. long, with 36807
“ “ Washer (leather)
NAME
....................
........................................
ATTACHIVIENT SET
STYLE NO. 14, IN METAL BOX (EXPORT)
NO. PL.\TE NAME
26319 5650 Binder.........................................................................
36833
---------
Box with Racka......................................................
25510 5647 Braider
289n 6308 “ Thumb Screw........................................
25,5271! 5635 Cloth Guido
287u 5635 “ “ Thumb Screw
25626 5650 Ilemmer, in. hem
25627 5650 “ in. hem
25628 56.50 “ 3^ in, hem
25629 5650 “ M in. hem
------ --------
5,5623 6306 Bobbins (live).........................................................
2.5515 ,5647 Quilter......................................................................
35463 5647 Rufiler
25632 5649 “ Shirring Plato
26155 --------- “ 35463 with 25632
25537 5635 Screw Driver (machine)
25538 5635 “ , “ (bobbin case)....................................
36583 5637 Tucker................................................................
25i)36 .5649 Under Braider...........................................................
25637 ,5647 “ “ Foot...............................................
36501
Needles (six)
------
Attachment Set complete, in metal box,
...............................................................
...........................................................
...................................
.........................................
.........................................
.........................................
..........................................................
................................................................
Nos. 287b, 289b, 25510, 25515, 25527b,
25537, 25538, 25626 to 25629, 2.5636,
25637, 26155, 26319, 36583, 36833,
five 55623 and six needles
..........................................
........................................
.................................
.........................................
.............................
ATTACHMENT SET
NO. PLATE NAME
25525 5635 Bias Gauge
36594 5636 Binder.........................................................................
25527b 5635 Cloth Guide
287b 5635 “ “ Thumb Screw....................................
35931 5636 Hemmer (adjustable)
------ --------
55623 6306 Bobbins (five).............................................................
35932 5636 Quilter.....................................................................
36517 .5636 Rulller........................................................................
359.39
-------35938 5638 “ Shirring Plato
25537 5635 Screw Driver (machine)
25538 5635 “ “ (bobbin case)
25539 5635 Stiletto
36583 5637 Tucker.........................................................................
35940 5638 Under Braider.........................................................
36489
---------
.................................................................
..............................................................
..............................................
Needles (six)
“ 36517 with 35938
Attachment Set complete. Nos. 287b,
..........................................................
.................................
..............................................
.........................................
...................................
....................................................................
25525, 25527b, 25537 to 25539, 35931,
35932, 35939, 35940, 36583, 36594, five
55623 and six needles.....................................
EDGE STITCHER
NO. PLATE NAME
36865 4910 Edge Stitcher
........................
HEMMERS
NO. PLATE NAME EACH
36333 4919 Ilemmer (foot) for chiffon and silk
35996
35857 6304 “ “ iyi in. hem............................
35884 4919 “ “ A in. hem............................
25888 6323 “ 3’ongue
------------
6267 6323 “ Folder..................................................
Note: When ordering Nos. 6267 or 25888 give width
of hem and No. of Hemmer for which it is required.
“ “ A in. hem............................
...............................................
............................
EACH
EACH
14
15
HEM STITCHER
NO. PLATE NAME
28915 6304 Heiiistitcher..........................
PRESSER FEET
NO. PLATE NAME EACH
36058 4919 Presser Foot with 605b and 36059, for
blind stitch cording, to turn small
curves
.............................................................
36059 4919 Presser Foot Cord Guide
665b 4919 “ “ “ “ Screw
Note: When ordering Nos. 36058 or 36059 send sainide of
cord for which it is to be used.
36067 4919 Presser Foot, for braiding, for art work,
for braid in. to in. wide
Note: When ordering No. 36007 state the size or send
sample of braid for which it is to be used.
........................................
........................
...................................
TUCK FOLDER
NO. PLATE
225923 2928
171a 2929
36090 2928
5006GE 2929
50067U 2929
19044 2929
1704b 2929
202600 2929
225926 2928
50068E 2929
1705b 2929
202603b 2929
36091 2928
1483H 2929
36092 4919
Folder..................................................................'
“ Adjusting Screw
“ Ann with 50068E...................................
“ .Screw Stud............................................
“ “ “ Cap Screw
“ “ “ “ “ Spring
Washer............................................................
F’older .Screw Stud 'Phumb Nut
“ “ “ “ “ Washer...
.Space Gauge
“ “ Screw Stud
“ “ “ “ T. h u in b Nut
Washer............................................................
'Puck I'older complete, for small pieces of
goods. Nos. 171a, 1704b, 1705b, 19044,
30090, 50066b, 50067u, 202600, 202603b,
225923, 225926 and two 1483ir
Tuck I’older Thumb Screw.................................
I'resser P’oot
NAME
....................................
.......................
........................
......................................................
......................................
(i i< (( ii it
.....................
.......................................................
BOBBIN WINDER (Automatic)
NO. PLATE NAME EACH
15376 6314 AdjuHting Arm
50058b 6313 “ “ Screw
15072 6313 Bobbin Position Pin
15284 6312 ' Bracket (belt cover)...............................................
180b 6313 “ Screw..........................................................
15413 6314 P’rame.....................................................................
50059b 6313 “ Hinge Screw............................................
15286 6313 “ .Spring.........................................................
15287 6313 Friction King (rubber)
15414 6314 Pulldy......................................................................
55638 6311 .Siiindle with 15072................................................
571c 0313 Worm
32625 6314 Stop Latch...................................................................
50230b 6313 “ “ Hinge Screw
15291 6313 “ “ .Spring
32628 6314 Thread Guide..............................................................
50061b 6313 “ “ Hinge Screw
15366 6313 “ “ .Spring
15416 6314 Worm Wheel and Thread Guide Cam
15424 0314
50b 0313 Worm Wheel and Thread Guide Cam
1528h 0313 Worm Wheel and Thread Guide Cam
55046 0323 Bobbin Wdiuler complete. Nos. 50b, 571c,
......................
...................................................
P’rlction Washer
Screw Stud
Screw Stud Nut
1528H, 15284, 15286, 15287; 15291,
15366, 15376, 15413,' 15414, 15416,
15424, 32625, 32628, 50058b, 50059b,
50061b, 50230b and 55638
......................................................
,...................................
.........................................
..................................
............................................
......................................
...............................................
..................................
...........................................
........................•...................
...............................................
per 100
............................
..
^
BOBBIN WINDER (Automatic)
OBSOLETE, USE 55646
NO. PLATE NAME EACH
15376 6314 Adjusting Arm............................................................
60058b 6313 “ “ Screw
1,5072 6313 Bobbin Position Pin.....................................per lOO
15284 6312 Bracket (belt cover)
180b 6313 “ Screw..........................................................
15285 6313 P’raine.....................................................................
50059b 6313 “ Hinge Screw................................................
.........................................
................................................
16
BOBBIN WINDER (Automatic)
HAND ATTACHMENT
17
PLATE
NO.
6313
15286
6313
15287
6313
15288
6311
55638
6313
571c
6314
32625
6313
50230h
32623
5006111
15291
2746
233u
15366
2748
6313
6314
6313
6313
6313
6313
6313
15403
6313
2749
50b
6313
6313
1528h
6311
55639
PLATE
NO.
6309
8377
6309
33647
6310
183e
6309
8380
—
8433
6309
8434
0310
8382
•8280
6309
8435b
8281
8282
—
8430
33642
—__
33643b
94007b 4916
NAM E
Frame Si)nng......................................................
l'’rict ion Ring (rubber)
......................................
Pulley.................................................................
Spindle with 15072.............................................
“ Worm
.........................................................
Stop Latcdi
.........................................................
“ “ Hinge Screw......................................
“ “ Spring................................................
'I’liread Guido
....................................................
“ “ Cam...............................................
“ “ “ Screw..................................
“ “ Hinge Screw..................................
“ “ Spring...................■
......................
Worm Wheel......................................................
“ “ 2748 with 233b and 2746...
“ “ Friction Washer
..............................
“ “ Screw Stud......................................
“ “ “ “ Nut
...........................
Bobbin Winder comi>leto, Nos. 50b, 571c,
152811, 2749, 15284 to 15288, 15291,
15366, 15376, 15403, 32623, 32625,
500581), 50059b, 50061b, 50230b and
55638..............................................................
HAND ATTACHMENT
OBSOLETE
NAME
Body
............
.......................................................
Brupket....................................................
“ “ Screw
Crank 1 laiidle (wood)........................................
0310
6310
6310
Crank com[)lele. Nos. 8380, 8434 and
8435b
Driver.................................................................
6310
94009.
........................................................
“ “ Spindle
.....................................................
“ “ “ 8433 with 8382. . .
“ “ “ Washer...................................................
“ Hinge Pin
....................................................
“ Loi'k Pin......................................................
“ “ “ Siiring
..................................................
.............................................................
“ Finger..........................................................
“ “ 33643b with 8390, 8391 and
NO. PLATE
8386 6310
8387 6310
8388 6310
94009 4916
8390 6310
8391 6310
8392 6309
8393 6309
. 399a 6310
659d 6310
8394 6310
2532 6310
■
660u 6310
33646
---------
Driver F'ingcr Hinge Pin.....................................
“ “ Dick Pin
“ “ “ “ Sjiring
“ “ Sheatli (leather)
“ “ “ Plate.............................
“ “ “ Staple...........................
Gear with 8281 and 8282....................................
“ Cover.............................................................
“ “ Screw
“ Screw Stud....................................................
Pinion..................................................................
“ Dowel Pin......................................per 100
“ Screw Stud
Hand Attachment complete, Nos. 137b,
name
.........................................
........................
.......................
.................................................
..................................................
659», 660n, 2532, 8280, 8377, 8386 to
8388, 8392 to 8394, 8436, 33642, 33647,
94007b and two each 183e and 399a . .
137b 6310
Hand Attachment Screw
.....................................
STAND
ROCKING TREADLE, BALL BEARING PITMAN, COVET SET
PLATE NAME
NO.
25442
46515
46624
46511
6321 Band Wheel, 12)^ in. diam., with 972c.. .
6321 “ “ Crank.........................................................
Band Wheel Crank and Pitman (ball
bearing) complete, Nos. 1520e, 25371,
46506 to 46510, 46515, 46655 and six
25362
........................
......................................
Band Wheel Crank and Pitman (ball
bearing) complete, Nos. 46624 and
46630
..............................................................
297c
46629
Band Wheel Crank Screw Centre
3826
—
“ “ “ “ “ 297c with
1507j...............................................................
3826
1507j
972c
82680
46631
1288e
25027
46525
34d
25033
Band Wheel Crank Screw Centre Nut. . .
3820 “ “ Set Screw...................................................
—
Belt, size in., length 64]^ in., with
25027
..............................................................
4917 Belt Guide...........................................................
6308
2908
“ “ Screw..........................................................
“ Hook..............................................................
0315 “ Shifter............................................................
6308 “ “ Hinge Screw
2908 “ “ Spring
...............................................
.........................................................
.......................
8043—2
18
NO. PLATE NAME
46632 6130 Hrace with three 46629..........................................
46638 6430 “ Section (left) with 46629.............................
46630 6430 “ “ (right) witli two 46629
138n 6308 “ “ Screw
46640 6130 Hrace (sectional) complete, Nos. 46638,
46639 and three 138e
74Se 3826 Hrace Screw
46633
------
46034 6430 Dress Guard complete. Nos. 34p, 25033,
1059iO 6308 Dress Guard Holt with 1510io...............................
1510e 6308 “ “ “ Nut........................................
25144 6321 Leg with two each 25068 and 25009
25068 6315 “ Roller.............................................................
25069 6315 “ “ Pin.......................................................
25302 3826 Pitman Ball, si/.e A- in
46506 3826 “ “ Hearing Adjusting Screw
46507 3820 I’itman Hall Hearing .''uljusting Screw
46508 3826 I’itinan Hall Hearing Ring
46509 3826 “ _ “ Case................................................
40055 3826 “ “ Separator...'.
40510 6321 “ Rod with 25300
*25360
25371 3826 “ “ “ Hushing.............................
25361 3826 “ “ “ Screw Hearing
46630
1070e 3826 Pitnian Rod Hall Screw Hearing Nut. . . .
1520IO 3826 “ “ Lock Nut
25106 6321 Treadle.......................................................................
297o 3826 “ Screw Centre...........................
46629
1507J 3826 “ . “ “ Nut...........................
25086 6321 Wrench for 1507, 1510 and 1670
25200 6321 “ “ 972
25281
Dre.ss Guard
46525 and 46633
fling
Ring Locking Wa.sher (hra.ss).. ,i)cr 100
-----
“ “ Hall...........................................
-------------
----------------
------
“ “ “ “ “ 25301 with
1670e
“ “ “ 297c with 1507j.. . .
Stand (iron work) complete. Nos. 1059e,
1288e, 25086, 25200, 25406, 25442,
16511, 46631, 46632, 46634, two 25444
and four 748e
STAND
---------
.......................................
.....................................
............................................................
..........................................................
...........................................
.....................
.................................
................................................................
.....................................
.............................
..............................
............................................................
........................................
..............................
..................................................
.................................................
per 100
..................
STAND
ROCKING TREADLE, BALL BEARING PITMAN, CABINET TABLE
NO. PLATE
25442 6321
46515 6321
46624
---------
46511
297c 3826
46629
---------
1507J 3826
972c 3826
25488
---------
25439
25027 2<)08 “ Hook...............................................
46525
25033 2908 “ “ Spring..........................................
82890
46526
25049
25414
25068
25069 6315
25302
46506 3826 “ “ Bearing Adjusting
46507 3820
46508 3826
46509
46655 3826
46510
*25360
0321
12881? 6308
6315 “ Shifter.............................................
34u 6308 “ “ Hinge Screw
6321
3826 “ Screw
748e
—
6321
504e 6308 Dress Guard Bolt with 1510e. .. .
1510e 6308
6321
6315 “ Roller
3826
3826
6321
—
Band Wheel, 12H in. diam., with 972c...
“ “ Crank
Band Wheel Crank and Pitman (ball
bearing) complete. Nos. 1520e, 25371,
46506 to 46510, 46515, 46655 and six
25362..............................................................
46630
Band Wheel Crank Screw Centre
“ “ “ “ “ 297c with
1507j
Band Wheel Crank Screw Centre Nut. ..
“ “ Set Screw..........................................
Belt, size in., length 663^ in., with
25027..............................................................
Belt Guide
“ “ Screw..........................................
Brace with three 46629
Dress Guard
Dress Guard complete, Nos. 34n,
46525 and 46526
“ “ “ Nut...........................................
Leg with two each 25068 and 25069
“ “ Pin................................................
Pitman Ball, size A in
Ring
.................................................
Pitman Ball Bearing Adjusting
Ring Locking Washer (brass)...
Pitman Ball Bearing Ring......................
“ “ Case
“ “ Separator
“ Rod with 25360
“ “ Ball..............................................
NAME
................................................
Band Wheel Crank and Pitman (ball
hearing) complete. Nos. 46624 and
..............................................................
.......................
..............................................................
............................................
................................
........................
............................................
.........................................
.............................
..................
..............................................
...........................
............................................
....................................
.............................
19
EACH
, 25033,
per 100
Screw
Screw
per 100
20 STAND
TRIMMINGS FOR COVER SET
21
NO. PLATE NAME
25371 3826 Pitman Rod Ball Bushing..........................................
25361 3826 “ “ “ Screw Bearing
46630
2,5406 6321 Treadle......................................................................
46629 ---------------- “ “ “ 297c with 1507j.. . .
25086 6321 Wrench for 1507, 1510 and 1670
25200 6321 “ “ 972
82953 —— Stand (iron work) complete, Nos. 504e,
------------
1670e 3826 Pitman Rod Ball Screw Bearing Nut....
1520e 3826 “ “ Lock Nut
297c 3826 “ Screw Centre
1507j 3826 “ “ “ Nut
“ “ “ “ “ 25361 with
1670e..............................................................
...............................
.....................................
...................... ......................
1288E, 25049, 25086, 25200, 25406,
25439, 2.5442, 46511, 82896, two 25444
and four 748e..................................................
............
.............................
..............................
CABINET TRIlVIMINGS
TRIMMINGS FOR COVER SET
NO. PLATE NAME E
87428 6316 Cover Hook................................................................
87372 6316 “ “ Cup Catch
56251 6316 “ Lock.............................................................
28297 6316 “ “ Cup Catch (nickeled)
28077 6316 “ “ Lscutcheun (nickeled)........................
28233 712 “ “ Key (steel)
2833 6318 Drip Pan.................................................................
28079 712 Knd Leaf Hinge......................................................
25056 6430 “ “ Sui)i>ort
2.5058 6430 “ “ “ Biacket with three
wooii screws ^ in. No. 7
525n 6308 Machine Hinge Bolt................................................
1727k 2908 “ “ “ Nut.................................
2807 2908 “ “ “ “ Washer
8294 2908 “ “ Connection
8293 2908 “ “ •' Hinge Pin...
50380c 0317 “ “ “ Set Screw....
8306
----------------
8292
--------
28242 6413 Machine Rest Cushion (leather) with
5604 6113 Machine Rest Cushion Pin
“ “ Nos. 525n, 8294 and 8295
Machine Hinge complete. Nos. 1727e,
2807 and 8306
5604................................................................
........................................
.........................
........................................
............................................
.................................
...................
.................................
................................................
.......................
per 100
PLATE
NO.
56429 2917 Partition Lock (revolving bolt, double).
2917
56429
2917
56430
2917
28076
28233
25047 6315 Skeleton Drawer Case Drawer Spring..
25047
46612
712
6315
6315
“ “ (revolving bolt, single).
“ “ Escutcheon (brass)
“ “ Key (steel)
“ “ “ Support with two
wood screws Yi in. No. 7 R. H. B
NAME
...............
............................
...................
EACH
TRIMMINGS FOR CABINET TABLE
NO. PLATE NAME EACH
87605 0317 Centre Drawer Hinge Bracket with two
87606 6317 Centre Drawer Hinge Bracket Plate with
28243 2917 Centre Drawer I^ock with two wood
28076 2917 Centre Drawer Lock Escutcheon (brass).
56258 6317 “ “ Stop Pin
56260 6321 Counterbalance Spring...................................
56261 6321 “ “ Adjusting Collar
5025lE 6317
1734k 6317 Counterbalance Spring Adjusting Collar
9281 6317 Counterbalance Spring Adjusting Collar
56262 6321 Counterbalance Spring Bracket (hinge)..
28235 712 Hinge, round end, for machine platform
Note: When ordering No. 28235 state finish.
28234 712 Hinge, round ends, for top leaf
Note: When ordering No. 28234 state finish.
28227
---------
2822S
---------
28221 6316 Knob (oxidized)......................................................
28223
---------
1272e 6316 Knob Screw
25152 2908 Machine Cushion (felt)...............................................
15254
---------
15251 2908 Machine Hinge Connection (oxidized) for
wood screws Yi in. No. 7
two wood screws Yi in. No. 7.........................
screws in. No. 2
Bolt with 1734b..............................................
Bolt Nut..........................................................
Bolt Nut Washer.............................................
flap..................................................................
Knob (brass)............................................................
Knob (brass) complete. Nos. 1272e and
28227..............................................................
Knob (oxidized) complete, Nos. 1272b
and 28221
“ Hinge Connection (brass) for
15266..............................................................
15264..............................................................
.......................................................
.............................................................
................................
..............................................
.........................................
...............................
TRIMMINGS FOR CABINET TABLE
12
NO.
2809 2908
50380c
15265
15263 2908
15266 —
3TU
PLATE
NAME EACH
Machine Hinge Connection Hinge Pin. . .
6317
—
“ “ “ Set Screw....
“ “ Plate (brass) for 15260...
“ “ “ (oxidized) for 15261
Machine Hinge (brass) complete, Nos.
2809, 15251, 15265 and brass wood
15264
—
screw % in. No. 10
Machine Hinge (oxidized) complete. Nos.
.........................................
2809, 15251, 15268 and oxidized wood
screw Jg io- No. 10.........................................
Machine Idfling Plate. . .■..................................
6321
56263
'56319
—
“ “ “ 56263 with 28123
amt 50262.......................................................
28123
56264
Macliiiie Lifting Plate Hinge Pin
2908
Machine Lifting Blate complete. Nos.
6321
.......................
9281, 50251e, 56260, 56261 and 56319.
2917
56429
2917
56430
28076 2917
28233
28125
250-17
712
712
6315
46612 6315
Partition Lock (revolving bolt, double)...
“ “ (revolving bolt, single).. .
“ “ Escutcheon (brass)...
“ ‘‘ Key (steel)
Shiehl Supiiorting Bracket
.....................
.........................
Skelidon Drawer Case Drawer Spring.. .
“ “ “ Support with two
wood screws J2 in. No 7 R. IL B
...................
TRIMMINGS FOR DRAWING-ROOM
CABINET
NO. PLATE NAME
28210 2917 Attachment Tray Pull (leather)
28211 2917 “ “ “ Washer.........................
28205 2915 Band Wheel with 972c...........................................
280115 2915 “ “ Bracket with 302c; and 1507j
28206 2915 “ “ Crank
282-18
--------
Band Wheel Crank and Pitman (ball
bcairing) complete, Ncjs. 1520e, 25371,
28206, 28247, 16506 to -16509, 46655,
56317 and six 25362
302c 6308 Band Wheel Crank Screw Centre
1507.T 3826 “ “ “ “ “ Nut....
972c 3826 “ “ Set Screw
28007
---------
Bc;lt, size Л in., length 66)2 in., with
25027..............................................................
28011 2915 Belt Guide with 31n, 25033 and 28015. ..
28012 2917 “ “ Screw Eye
..................................
.........................................
......................................
...........
.........................................
...........................'..............
TRIMMINGS FOR DRAWING ROOM CABINET 23
NO. PLATE
28126 2908
28250
2908
25027
28015
6308
34d
2908
25033
28016
28017
28018
2908
28019
28020
2915
28021
28076
2917
87363
2915
15232
28253
Note
28234
Note
28227
28228
28221 6316
28223
---------
6316
1272e
6129
56323
6-129
5632-1
6317
56438
6429
56325
28034
2908
28200
5604
56326
8294 2908
8295 2908
50380c 6317
87571 6317
SS368n 6317
87572 6317
87573
Belt Hole Bushing (oval, brass) % in. x
1 in..................................................................
Belt Hole Bushing (oval, oxidized) % in. x
1 in.................................................................
Belt Hook............................................................
“ Shifter............................................................
712
“ “ Hinge Screw
“ “ Sjrring................................................
Cabinet Case Roller (iron)
712
712
“ “ “ Frame
“ “ “ Pin
Cabinet Case Roller complete. Nos. 28016
712
to 28018..........................................................
Drawer Lock Bolt
712
“ “ “ Cam and Plate
“ “ Escutcheon (brass).........................
712
“ “ Key
Drip Pan..............................................................
Hinge, 1 in. X lA in-i for doors
712
: When ordering No. 28253 state finish.
Hinge, round ends, for top leaf
712
: When ordering No. 28234 state finish.
Knob (brass)........................................................
Knob (brass) complete. Nos. 1272e and
28227
Knob (oxidized)..................................................
Knob (ovidized) complete. Nos. 1272e and
28221..............................................................
Knob Screw
Latch
...............................,..................................
“ Button..........................................................
“ “ Hinge Pin........................................
“ I’rame
“ Hinge Pin.....................................................
2908
2908
6-129
“ Spring
“ “ Rivet
Latch complete. Nos. 5604, 28034, 28200,
56323 to 56325 and 56438
Machine Hinge Connection
“ “ “ Hinge Pin...
“ “ “ ■ Set Screw....
“ “ Head...
“ “ “ Screw
“ • “ “ “ Washer
Machine Hinge complete. Nos. SS368n,
-----8294, 8295, 87571 and 87572
NAME
....................................
..................................
............................
.................................
...............................................
......................
..........................................
..........................
...........................
..............................................................
........................................................
..........................................................
..........................................................
.................................
.............................
................................
........................................
..............................
........................
EACH
..
per 100
................
2t rUIMMlNOH ГОН DRAWING ROOM CABINET
25
NO. PLATE NAME EACH
2S212 6413 Machiuo Rest Cushion llcatlier) with
5601................................................................
5601 6113 Miieliiiie Rest Cushion Pin
Pilinan Ball, size in
3826
253(i2
4650<)
40507
3826
3826
“ “ Bearing Adjusting Screw
Bing
.....................................................................................
Pitman Ball Bearing Adjusting Screw
......................
...............................
per 100
per 100
Jiing Locking Wn.sher (brass)., .per 100
40508
16509
40(i55
28247
■25360
2,5.371
56253
56317
Pitman Ball Bearing Ring
3826
3826
3826
2915
—
3826
2917
—
“ “ ('ase
“ “ Separator
“ Rod with 25360
“ “ Ball..........................................................
“ “ “ Bushing................................................
“ “ “ Screw Bearing
“ “ “ “ “ 56253 with 28263..............................................................
.........................................................
..................................
.................................................
.................................
..
......................................
1670H............................................................
1670e 3826 Pitnmn Rod Ball Bcrew Bearing Nut. ..
1520e 3826 “ “ Rock Nut
56257 ---------Rocking Frame
56255
---------
“ “ 56257 with two each
.......................................................
........................................
28043 and 28045 ...........................................
Jtocking Frame 56255 witli 43-lc and
‘2015
28011
28048..............................................................
■28042
28043
28041
2260
28015
2915
712
2908
2917
“ “ Connecting Link.....................................
“ “ “ “ Bracket
(( U U it ii
Pin
..................................................................
Rocking Frame Connecting Link Hinge
Rocking Frame Bracket...................................... 28266 6315 Belt Guide. .
2915
Sind.................................................................
28046
28047
28048
28040
434 c
Roidcing l‘’rame Hinge I’late
2915
2915
2915
2908
6308
“ “ Spring.....................................................
“ “ “ Adjusting Block
u u u u a
Pin
..................................................................
Rocking Frame Spring Adjusting Block
iSet (Screw
.....................................................
............................
28051 2917 S[)ring Catch..........................................................
28052 2917 “ “ Cup.................................................
28208 2915 Treadle
............................................................
..........
297c 3826 “ Screw Centre.........................................
56252 2915 “ “ “ Bracket with 297c
and 1507j........................................................
1507j 3826 Treadle Screw Centre Nut........................................
25086 6321 Wrench for 1507 and 1670
25200 6321 “ “ 972
........................................
..................................................
TRIMMINGS FOR OPEN-SIDE DRAWING
ROOM CABINET
NO. TLATK
Ai)ron Spring
6317
15514
28277 6317
25442 6321
6321
46515
28260
“ “ Screw Eye
Band Wheel, 12t4 in. diam., with 972c...
“ “ Crank.........................................................
Band Wheel Crank and Pitman (ball
bearing) complete, Nos. 1520e, 25371,
28‘267, 46506 to 46509, 46515, 46655,
56317 and six 25362.......................................
6322 Band Wheel Crank Frame with two each
28261
■297c and 1.507j............................................
6322 Band Wheel Crank Frame Bracket with
28262
28263 6317 Band Wheel Crank Frame Bracket
Cushion (leather)
649e 6323 Band Wheel Crank Frame Screw
297c 3826 “ “ “ Screw Centre
1507j 3826 “ “ “ “ “ Nut....
972c 3826 “ “ Set Screw
—
25135
Belt, size
2.50‘27
250‘27 2908 “ Hook,.
6315 “ Shifter.
46525
341)
6308
25033 2908
28016
28017 712
28018 2908
28019
“ “ 1
“ “ S
712 Cabinet Case
U ti
i( it
712 Cabinet Case
to 28018. .
6321
56260
Counterbalan
56261 6321
50-251E
6317
Bolt with 1734e
1734b 6317 Counterbalance Spring Adjusting Collar
Bolt Nut
9281 6317 Counterbalance Spring Adjusting Collar
Bolt Nut Washer
56262 6321 Counterbalance Spring Bracket (hinge). .
28278
---------
Door Drawer Lock Plate (brass)..................
28279 4270 “ “ “ “ (oxidized)
28280 ------------ “ “ “ “ H u b K e y
(brass).............................................................
NAMK
......................................................
.................................................
............................................
..................
.......
Frame.
Pin. . .
a
“
" Adjusting Collar
(i U ii
..............................................
..........................................................
.............................................
........
........
.............
Loading...