Form 20490
(1251)
Printed in U.S.A.
LIST
OF
PARTS
MACHINES
i
Nos. 114-55 and 114-56
A TRADE MARK OF
THE SINGER MANUFACTURING COMPANY
tNSTRUCTIONS FOR OILING
To ensure easy running and prevent unnecessary wear
of the parts which are in movable contact, the machine
requires oiling and when in continuous use, "TYPE B"
or "TYPE D" OIL, sold only by Singer Sewing Machine
Company, should be applied at least twice each day to
all oil holes marked "OIL," as instructed in Form 20174,
"TYPE D" OIL is stainless.
INDEX
Page
Attachments and Accessories
16
Button Spacing Guide (Adjustable) 16
Machine No. 114-55
Machine No. 114-56
Numerical List of Parts
15
19
Starting lever 17
Table Belt Guide
Thread Unwinder
17
17
7
Copyright, U. S. A., 1940 and 1952 by
The Singer Manufacturing Company
All Rights Reserved for All Countries
INSTRUCTIONS FOR ORDERING
In ordering from this list, use ONLY the part NUMBER in
the FIRST column.
The number stamped on a Sewing Machine Part is in
every case the number of the single part only.
Every combination of parts sent out as such has its specific
number, which, although not stamped on the parts, must be
used when ordering the combination.
Each number always indicates the SAME PART in what
ever list it appears, or for whatever machine.
The letters after some of the numbers indicate the style
of finish only, as follows;
A—Hardened, Polished, Nickel Plated and Buffed
A.A—Buffed and Chromium Plated
A.B—Hardened, Polished, Buffed and Chromium Plated
A.C—Brown Baking Enamel Finish
A.D—Gray Baking Enamel Finish
A.E—Hardened, Bright Rumbled and Nickel Plated
A.F—Hardened, Bright Rumbled, Nickel Plated, Bright Rumbled
and Chromium Plated
A.G—Alumilite, Plain
A.H—Alumilite, Dyed
A.J—Polished, Nickel Plated and Chromium Plated
A.K—Hardened, Polished, Nickel Plated and Chromium Plated
A.L—Heat Treated for Toughness
B—Polished, Nickel Plated and Buffed
C—Hardened Only
C.R—Hardened and Merlized
D—Polished Only
E—Soft, Not Polished
F—Hardened and Polished
F.J—Hardened, Polished and Nickel Plated
G—Bright Rumbled and Nickel Plated
H—Blued
J—Nickel Plated Only
K—Hardened and Nickel Plated
L—Brass Plated
M—Oxidized
N—Japanned, Dull
P—Japanned, Bright
P.P—Wrinkle Finish
R—Merlized
S—Cadmium Plated
T—Copper Plated
T.A—Hardened, Polished, Copper and Nickel Plated and Buffed
T.B—Copper and Nickel Plated and Polished
T.J—Copper and Nickel Plated Only
T.K—Hardened, Copper and Nickel Plated
T.L—Copper and Brass Plated
T.M—Copper Plated and Oxidized
INSTRUCTIONS FOR ORDERING-Continued
U—Zinc Plated
V—Silver Plated
W—Polished and Nickel Plated
X—Black Oxide, for Iron and Steel
X.C—Hardened and Black Oxide, for Iron or Steel
Y—Black Nickel Plated Only
Z—Chromium Plated
Z.A—Hardened, Polished, Nickel Plated, Buffed and Chromium
Plated
Z.B—Polished, Nickel Plated, Buffed and Chromium Plated
Z.C—Hardened and Chromium Plated
Z.D—Polished and Chromium Plated
Z.G—Bright Rumbled, Nickel Plated, Bright Rumbled and
Chromium Plated
Z.J—Nickel and Chromium Plated
Z.T—Copper and Chromium Plated
These letters MUST BE USED when they appear in the
list; and AFTER the number as in the list.
In this series;
f to f 500, 50001 to 51500 and 140001 to 142000 are
Screw Numbers
1501 to 1800 and 51501 to 51800 are Nut Numbers
1801 to 2000 and 51801 to 52000 are Roller Numbers
2001 to 50000 and 52001 to 140000 and 142001 to
190000 are Sewing Machine Parts, 190001 and upward
are numbers of Electrical Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
SINGER Needles should be used
in SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark “SIMANCO.**" 1
Needles in Containers marked
“FOR SINGER MACHINES”
are NOT SINGER made needles. 2
SINGER Needles should be used
in SINGER Machines.
These Needles and their Containers
are marked with the
Company's Trade Mark “SIMANCO.
Needles in Containers marked
"FOR SINGER MACHINES”
are NOT SINGER made needles. 2
LIST OF PARTS COMPLETE
FOR
MACHINE No. 114-55
FOR SEWING TWO OR FOUR-HOLE BUTTONS, FROM 14
TO 24 LIGNE. MAKES TWO PARALLEL BARS IN FOURHOLE BUTTONS WITH A RIGHT ANGLE CROSS-OVER
STITCH, 21 STITCHES. BUTTON CLAMP VIBRATES
ACROSS THE CYLINDER. BREAKS THREAD AUTOMATI
CALLY. SPEED 1500 R.P.M.
No.
136654
136655
16532
4448
56015
136594 23193
880E
59702
17703
50333AL
1520J
4449
59703
1036AL 23193
59704 23193
59705
446AL 23193
59706
446AL 23193
59707 23193
Plate
23193
23193
23193
23193
23193
23193
23193
23193
23193
23193
23193
23193
Arm.......................................................................................................
Arm 136654 with 4449, 136672 and two 164E—................................
Arm Dowel Pin (2)................................................................................
Arm Oil Tube, for intermediate bearing
Arm Oil Tube, for oiling 59705 and 59706 (2)
Arm Oil Tube, for oiling Needle Bar Connecting Link
(upper) Bearing...............................................................................
Arm Screw (4)..-
Arm Shaft (horizontal)......................................................................
Arm Shaft (horizontal) Bushing (back)
Arm Shaft (horizontal) Bushing (back) Adjusting Screw
Arm Shaft (horizontal) Boshing (back) Adjusting Screw Nut
Arm Shaft (horizontal) Bushing (front)
Arm Shaft (horizontal) Geor with two 1036AL
Arm Shaft (horizontal) Gear Set Screw (2)
Arm Shaft (upright)
Arm Shaft (upright) Bushing (lower)....................................................
Arm Shaft (upright) Bushing (lower) Set Screw...-
Arm Shaft (upright) Bushing (upper)....................................................
Arm Shaft (upright) Bushing (upper) Set Screw
Arm Shaft (upright) Gear (lower) with two 1253AL..............................
Name
...............................................
................................
................................................................................
.................-..........-.......
.................................................
...........................................................-................
..........................................
.....................
......................-.............
..............................
..................................
.
.
No.
1253AL 23193
59708 23193
1253AL 23193
124674 23193
190J 23193
18498
59795 23193
184E 23193
59796 23193
217J 23193
39222
63976 23195
1255J
124712 23196
124713
124714 23196
124715
124716
50435J 23196
124717 23196
124718
1253AL
51224W
124719 23196
124720 23196
1403E
124902 23195
124901
124903
792C
176J 23195
50446D
56493
124846
136598
136599
17723
136600
45329
228X
136601 23197
136602
17723
136603
45329 23197
228X
136604 23197
136605
17710 23197
1176X 23197
136606
203X 23197
63825 23197
1175X 23197
124906 23198
136583
190X
136656 23199
223J 23199
136657
136658 23199
Plate
23193
23195
23195
23196
23196
23196
23196
23196
23195
23195
23196
23196
23196
23197
23197
23197
23197
23197
23197
23197
23197
23197
23198
23198
PARTS FOR MACHINE No. 114-55
Arm Shaft (upright) Gear (lower) Set Screw (2)
Arm Shaft (upright) Gear (upper) witli two 1253AL
Arm Shaft (upright) Gear (upper) Set Screw (2)
Name
...............................
..........................
..............................
Arm Side Cover.................................................................................
Arm Side Cover Screw (2)................................................................
Belt Cover..........................................................................................
Belt Cover Bracket with 184E and 59796
Belt Cover Bracket Screw Stud
Belt Cover Bracket Stud.
Belt Cover Screw (2)
Beit Shifter
....................................
Belt Shifter Clamp.............................................................................
Belt Shifter Clamp Screw (2)
Brake.................................................................................................
Brake 124712 with four 56493
Brake Adjusting Plate.......................................................................
Brake Adjusting Plate Handle...........................................................
Brake Adjusting Plate Handle 124715 with 124717
Brake Adjusting Plate Handle Hinge Screw......................................
Brake Adjusting Plate Handle Shaft
............
..............................................
........................
----------------------
........................................................
.......
............
............ ...............
.......
...................................
..................................
.........................................................
.........................
Brake Adjusting Plate Hatidle Shaft Crank with 1253AL. ..
Brake Adjusting Plate Handle Shaft Crank Set Screw
.....................
Brake Adjusting Plate Thumb Screw
Brake Adjusting Plate Thumb Screw Bushing..................................
Brake Arm ................
Brake Arm Hinge Screw
Brake Arm Releasing Lever
Brake Arm Releasing Lever 124902 with 124903 and two
792C
.........
Brake Arm Releasing Lever Bracket .
Broke Arm Releasing Lever Bracket Screw (2) .
Brake Arm Releasing Lever Screw (2)
Brake Hinge Screw...........................................................................
Brake Pad (leather) (4)
Brake Spring...................................................................................
Button Clamp (left) with 17723 and 45329.
Button Clamp (left) 136598 with 228X and 136600
Button Clamp (left) Screw Stud
Button Clamp (left) Spring
Button Clamp (left) Spring Position Pin
Button Clamp (left) Spring Screw
Button Clamp (right) with 17723 and 45329.....................
Button Clamp fright) 136601 with 228X and 136603
Button Clamp (right) Screw Stud
...............................
...........................................................
.............................................................. ..................
................. ..............................................
_________ ________
...................................... ................
............
...........................................
.....................................................
........................
...........................
Button Clamp (right) Spring...............................................................
Button Clamp (right) Spring Position Pin
Button Clamp (right) Spring Screw..................................................
Button Clamp Arm with 17714
Button Clamp Arm complete. Nos. 136604, 136606 and
two 203X
Button Clamp Arm Hinge Plate
Button Clamp Arm Hinge Plate Screw..............................................
........................
........................................................
............
...............................................
..................
Button Clamp Arm Hook with 63825 .
Button Clamp Arm Hook Screw (2)
Button Clamp Arm Hook Stud
........................... .....................
..........................................................
Button Clamp Hinge Screw (2) ........................................................
Button Clamp Lifter............................................................................
Button Clamp Lifter 124906 with 330J and 39453
Button Clamp Lifter Screw................................................................
Button Clamp Lifting Cam
Button Clamp Lifting Cam Screw
.......................... .....................................
.............................
.........................
Button Clamp Lifting Lever................................................................
Button Clamp Lifting Lever Connecting Rod.....................................
-----------
................
......
......
..............
.........
PARTS FOR MACHINE No. 114-55
No.
136659
136660
136661
136662
136663
39241
17713
17714
20437
39242
136705
136607
17718
17720
63741
136608
136609
1655C
1735C
237X
1177X
1178X
104X
1181X
1180X
1199X
1183X
Plate
23199
23199
23199
23198
23198
23199
23199
23199
23197
23197
23197
23197
23197
23197
23197
23197
23197
23197
23197
23197
23197
23197
23197
23197
23197
23197
Button Clamp Lifting Lever Connecting Rod 136658 with
1655C, 136660, 136662 and 136663
Button Clamp Lifting Lever Connecting Rod Extension
Button Clamp Lifting Lever Connecting Rod Extension Lock
Nut
........ .
Button Clamp Lifting Lever Connecting Rod Hinge Screw
Stud
.........
Button Clamp Lifting Lever Connecting Rod Hinge Screw
Stud Nut
Button Clamp Lifting Lever Connecting Rod Spring
_____
Button Clamp Lifting Lever Connecting Rod Spring Collar
with 237X..........................................-
Button Clamp Lifting Lever Connecting Rod Spring Collar
Set Screw.........................................................................................
Button Clamp Pressure Spring.............................................................
Button Clamp Pressure Spring Bracket
Button Clamp Pressure Spring Bracket Screw
Button Clamp Pressure Spring Guide Block
Button Clamp Pressure Spring Screw.................................................
Button Clamp Pressure Spring Screw Washer
Button Clamp Spreader.......................................................................
Button Clamp Spreader Lever..............................................................
Button Clamp Spreader Lever Hinge Screw
Button Clamp Spreader Lever Spring..................................................
Button Clamp Spreader Lever Spring Screw Stud...............................
Button Clamp Spreader Lever Thumb Screw
Button Clamp Spreader Lever Thumb Screw Washer
Button Clamp Spreader Steady Pin (2)..............................................
Button Clamp Spreader Thumb Plate
Button Clamp Spreader Thumb Plate Screw.......................................
Button Clamp Stop with two 17720 ....................................................
Button Clamp Stop Screw....................................................................
Button Clamp complete. Nos. 104X, 11 SOX, 1181X, 1183X,
136607, 136608, 136705 and two 1175X
136644 25261
136646
62102
742F 25261
1547J 25261
62103
3021
190J
136645
136647 25261
*136610
62189 23199
136611 23199
136612 23199
62185 23199
136703
62111 23199
1477J 23199
.
124744
1477J 23199
62113 23199
1034J
124745
236J 23193
25261
25261
25261
25261
25261
25261
NOTE;
23199
23199
23193
Cloth Plate for 136645
Cloth Plate for 136647
Cloth Plate Guide Block (left)
Cloth Plate Guide Block (left) Screw
Cloth Plate Guide Block (left) Screw Nut
Cloth Plate Guide Block (right)
Cloth Plate Guide Block (right) Rivet (2)
Cloth Plate Screw (2)............................................
Cloth Plate complete with Button Tray, Nos. 742F, 1547J,
62102, 62103, 136644 and two 3021 ..........
Cloth Plate (less button tray) Nos. 742F, 1547J, 62102,
62103, 136646 and two 3021
Nos. 136645 or 136647 are furnished only when ordered.
Cylinder with 124719............................................
Cylinder Bottom Cover........................................................................
Cylinder End Cover..............................................................................
Cylinder End Cover 136611 with 1034J, 62113, 62189,
136703 and fourl477J
Cylinder End Cover Bracket
Cylinder End Cover Bracket 62185 with 62111 and 124744
Cylinder End Cover Bracket Hinge Pin
Cylinder End Cover Bracket Screw (2)
Cylinder End Cover Hinge...................................................................
Cylinder End Cover Hinge Screw (2)...................................................
Cylinder End Cover Spring...................................................................
Cylinder End Cover Spring Screw
Cylinder Oil Well Cover
Cylinder Oil Well Cover Screw
Name
...........
................ .............
............
........
.................................................................
.................................................................. ...................
__________
___- .................................................
...................
...............................................
....................................
........................
...............
....................................
........................................
......................................
........................
.................................................
1199X, 17718, 39242, 63741, 136599, 136602, 136605,
............................ .
...........................
.................. ..
......................
..................................
.........
...................................
...........................................
............................................................
..............................................
..............
..............................
...............
...............
............ .
................
.......................................................
.......
........
.............
........................
...............
............
............
................................................................
................................................
................................................
.......................................................
..............
.....................
.............................................................
...................
.......
.
..
10
No. Plate
136664
136665 23198
164J 23198 Face Plate Screw ................................................................................
2107 23198 Face Plate Thread Guard (2)
229J 23198 Face Plate Thread Guard Screw (2) ...................................................
9543 23198
9544 23198
208AL 23198
9545
63940 25262 Feed Across Connection (lever end) with two 896AL.........................
63941
55381
641C
63942
63943
63944
62115
1649C
1650C
896AL
62147 25262 Feed Across Lever with 641C and 1952.............................................
124676
17737 25262 Feed Across Lever Hinge Stud............................................................
160J
136613
136615
1094F 23197 Feed Across Lever Plate Screw
55300
1952
124865 25262
124866
50599D 25262
1676C 25262 Feed Across Regulator Adjusting Screw Stud Nut
46244 25262 Feed Across Regulator Adjustit^g Screw Stud Nut Washer
17738 25262
1188D 25262
62121 25262
50324C 25262 136697
1655E 25262
14017
17741 23197 Feed Across Regulator Link Stud
136666
39231 23193
1442C
1441AL 23193 Feed Cam Driving Worm Set Screw
17997 23199
18384 23199 Feed Cam Driving Worm Wheel Pin
453AL
18384 23199 Feed Cam Pin
1192C 23199 Feed Cam Set Screw (2)
62155 23199 Feed Cam Shaft .............................................
124874
1653C 23199
17923 23197 Feed Plate for four-hole buttons
124747 23197
136695 23197
136617
PARTS FOR MACHINE No. 114-55
Face Plate
23198
23198 Face Plate Thread Nipper Disc Spring................................................
25262 Feed Across Connection (lever end) Ball Stud
25262 Feed Across Connection (lever end) Ball Stud Set Screw ...
25262 Feed Across Connection (regulator end) with two 896AL.. ..
25262 Feed Across Connection (regulator end) Bail Stud
25262 Feed Across Connection Adjusting Stud ............................................
25262
25262 Feed Across Connection Adjusting Stud Nut (right)............................
25262 Feed Across Connection Cap Screw (4)
25262 Feed Across Lever Hinge Stud Clomping Screw
23197 Feed Across Lever Plate with 17741
23197 Feed Across Lever Plate Cover
23197
25262 Feed Across Lever Roller and Stud
25262
23199
23193 Feed Cam Driving Worm Position Screw
23199 Feed Cam Driving Worm Wheel Set Screw
........................ .................................................................
Face Plate complete. Nos. 208AL, 9544, 9545, 136664 and
two each 229J, 2107 and 9543.................................._
Face Plate Thread Nipper Disc (2)
Face Plate Thread Nipper Disc Cover.........................................
Face Plate Thread Nipper Disc Cover Screw.....................................
Feed Across Connection (lever end) 63940 with 55381
Feed Across Connection (regulator end) 63942 with 63944
Feed Across Connection Adjusting Stud Nut (left)
Feed Across Lever 62147 with 17737 ................................................
Feed Across Lever Plate Steady Pin (2)
Feed Across Regulator.............................................
Feed Across Regulator 124865 with 1188D, 1655E, 14017
and 50324C
Feed Across Regulator Adjusting Screw Stud .
(fiber) . . .....................................................................
Feed Across Regulator Adjusting Screw Stud Nut Washer
(steel)
............................ ...........................
Feed Across Regulator Hinge Screw
Feed Across Regulator Link .........................
Feed Across Regulator Link Screw Stud Nut
Feed Across Regulator Link Screw Stud Nut Washer
Feed Cam with 190J, 17874, 136656, 136674, two 1192C
and three 223J
Feed Cam Driving Worm with 1441AL and 1442C
Feed Cam Driving Worm Wheel with 453AL
Feed Cam Shaft Nut....................................
Feed Plate for two-hole buttons....................................
Feed Plate Carrier Bar
Feed Plate Carrier Bar 136695 with 934X, 1195X, 8505, 2058
17743, 18368, 136613, 136615, two 55300 ond four
Name
.............................................................
.....................................................
..................................................
.............................................
.....................
...............
..........................................
............................
................................
...............................
....................
................... .
.......................................
..............................
...........................................
....................
..........
...........................
.........................
..........................
........................
............................
No.
59730
50306D
18368
1654X
17806
1195X
8505
17742
62117
62187
8589
17744
17743
1953
37310
17745
136618
124761
124762
52045
59707
59747
50150AL
136619
124764 23193
50189C
59742
124765
50150AL
136620
39203
136698
62235
136621 23193
136622 23193
136623 23193
51933
136624 23193
175547 23193
50138F
136669
Plate
23197
23197
23197
934X
160J
1177D
1655C
1190C
1191D
1148AL 23193
190J
1253AL
1518J
187E
1293AL 23193
1057AL 23193
23197
23197
23197
23197
25262
25262
25262
25262
25262
23197
23197
25262
25262
25262
23197
23197
23197
23193
23193
23193
23193
23193
23193
23193
23193
23193
23193
23193
23193
23193
23193
23198
23198
377C 23198
446AL 23193
195C 23193
624AL 23193
218D
23198
23198
23198
23193
23193
23193
23198
23198
23198
PARTS FOR MACHINE No. 114-55
Feed Plate Carrier Bar Pivot Block......................................................
Feed Plate Carrier Bar Pivot Block Screw
Feed Plate Carrier Bar Plate
Feed Plate Carrier Bar Plate Screw.....................................................
Feed Plate Nut ...............
Feed Plate Position Stud (4)
Feed Plate Screw Stud
Feed Plate Screw Stud Rivet...............................................................
Feed Regulator with 1953
Feed Regulator Bracket with three 160J
Feed Regulator Bracket 62117 with 17742 and 17745..
Feed Regulator Bracket Cap Screw (3)
Feed Regulator Bracket Dowel Pin (2)
Feed Regulator Bracket Screw (2).......................................................
Feed Regulator Hinge Stud
Feed Regulator Post..........................................................................
Feed Regulator Roller and Screw Stud with 1655C and
37310
............... ....
Feed Regulator Roller and Screw Stud Nut.........................................
Feed Regulator Roller and Screw Stud Nut Washer
Feed Regulator Stop Screw.................................................................
Feed Regulator Swivel.........................................................................
Feed Regulator Thumb Screw.............................................................
Looper..................................................................................................
looper Driving Shaft
Looper Driving Shaft Bushing..............................................................
Looper Driving Shaft Bushing Packing (cotton)
Looper Driving Shaft Bushing Set Screw
Looper Driving Shaft Gear with two 1253AL
Looper Driving Shaft Gear Cover........................................................
Looper Driving Shaft Gear Cover Screw (2) .......................................
Looper Driving Shaft Gear Set Screw (2)
Looper Set Screw................................................................................
Looper Shaft with 50150AL and 59742...............................................
Looper Shaft Bushing..........................................................................
Looper Shaft Bushing Set Screw.......................................................
Looper Shaft Collar.............................................................................
Looper Shaft Coupling with four 50150AL..........................................
Looper Shaft Coupling Set Screw (4)
Needle Bar with 50138F
Needle Bar Connecting Link
Needle Bar Connecting Link 39203 with 377C, 1518J and
136698 ................................................................................... .
Needle Bar Connecting Link Hinge Screw..........................................
Needle Bar Connecting Link Hinge Screw Nut
Needle Bar Connecting Stud with two 187E.....................................
Needle Bar Connecting Stud Set Screw (2)...................................
Needle Bar Crank Wheel with 446AL and 1293AL
Needle Bar Crank Wheel Position Screw
Needle Bar Crank Wheel Set Screw...................................................
Needle Guide with 175547 and two 218D
Needle Guide Cam with two 195C.....................................................
Needle Guide Cam Set Screw (2)......................................................
Needle Guide Oscillating Crank with 1057AL and 51933
Needle Guide Oscillating Crank Clamping Screw.............................
Needle Guide Oscillating Crank Roller and Stud...............................
Needle Guide Shaft Bushing..............................................................
Needle Guide Shaft Bushing Set Screw
Needle Guide Thread Finger
Needle Guide Thread Finger Screw (2)..............................................
Needle Set Screw
Presser Bar.........................................................................................
Presser Bor Guide Bracket with 1057AL
Name
................................................................
........... ............................ ..........................
......................... ................. ...................
........................................................................
.............................. ...........................
.................................................................
............ ............
.............................................................................
.............. .
...............................................................
..............................................................
.............
.................................................................
...........................................
..............................................
...............................................
................................................
......................................
............................................
...........................................
................................................
................................................
.........................................
____________________
............................................
............................................
....................
...........................
...................................
.....................................
...................................
........................
11
.......
12
No.
1057AL
136670
1454C
136671
136672 25263
164E 25263
1382D
1683C
17845 25263
39408
17846
50087AL
15992
68784 23193
68785
68786
51387R
200584D
68787
68788
63789
2022
J8790
136596
17853
1262C
1662C 23195
17854 23193
17855
124784 23195 Stop Cam Interlocking Rod Cose
124770
124904 Stop Cam Interlocking Rod Case 124770 with 63976 and
124771
124772 23195 Stop Cam Interlocking Rod Case Bracket
124773
21828
50372D 23195 Stop Cam interlocking Rod Case Bracket Screw
1204E 23195 Stop Cam Interlocking Rod Case Hinge Screw
17859
898J
11622 23196
19694 23196
1695C
17861 23195
1254C 23195
1508J 23195
17862 23195
124774
17863 23195 Stop Cam Interlocking Rod Spring
17864
1318J
68739 23195
3012 23193
1206C
PARTS FOR MACHINE No. 114-55
Plate
23198
25263
25263
25263
25263
25263
25263
25263
23198
23193
23193
23193
23193
23193
23193
23195 Starting Lever
23195 Starting Lever Hinge Screw
23195 Stop Cam Interlocking Rod
23195 Stop Cam Interlocking Rod Case Bracket Dowel Pin. .
23195 Stop Com Interlocking Rod Cose Socket Joint
23195
23196
23195
23195 Stop Cam Interlocking Rod Stop
23195
23193 Stop Cam Screw
Presser Bar Guide Bracket Clamping Screw
Presser Bar Lifting Collar with 50087AL and two 1454C
Presser Bar Lifting Collar Set Screw (2)..............................................
Presser Bar Lifting Lever
Presser Bar Lifting Lever Bracket
Presser Bar Lifting Lever Bracket Screw (2)
Presser Bar Lifting Lever Hinge Screw
Presser Bar Lifting Lever Hinge Screw Lock Nut
Presser Bar Lifting Lever Rod
Presser Bar Lifting lever Rod 17845 with 17846
Presser Bar Lifting Lever Rod Chain
Presser Bar Lifting Lever Screw Stud ...............................................
Presser Bar Spring..........................................................................
Pulley (loose) 2 3/4 in. diam., with 200584D
Pulley (loose) 68784 with 68786
Pulley (loose) Ball Bearing................................... ..............................
Pulley (loose) Cap Screw....................................................................
Pulley (loose) Oil Hole Plug Screw
Pulley (loose) Spacing Collar..............................................................
Pulley (tight) 2 7/8 in. diam..................................................................
Pulley (tight) 68788 with 1206C arrd 17854
Pulley (tight) Pin
Pulleys (boll bearing) complete, Nos. 51387R, 68785,
68787 and 68789
Set of Mated Gears for lower Shaft, No. two 59707
Starting Lever Hinge Screw Nut
Stop Cam 136674
Stop Cam Interlocking Rod Cose 124784 with 124774,
124901 and two 176i
two 1255J
Stop Cam Interlocking Rod Case 124904 with 1318J,
17855, 17863, 17864, 39222 and 68739
Stop Cam Interlocking Rod Case Bracket complete, Nos.
1182E, 1196AL, 1204E, 1254C, 1262C, 1508J, 1662C,
17853, 17859, 17861, 17862, 17873, 68783, 124771,
124772 and two 898J
Stop Com Interlocking Rod Cose Socket Joint Cop Screw
(2)................................................................................................. 136635 25263
Stop Com Interlocking Rod Case Spring...........................................
Stop Cam Interlocking Rod Case Spring Hook
Stop Cam Interlocking Rod Cose Spring Hook Lock Nut
Stop Cam Interlocking Rod Case Stop Stud
Stop Cam Interlocking Rod Cose Stop Stud Screw Bushing
Stop Com Interlocking Rod Case Stop Stud Screw Bushing
Lock Nut
Stop Cam Interlocking Rod Case Stop Stud Spring
Stop Cam Interlocking Rod Case Wearing Block
Stop Com Interlocking Rod Stop Screw
Stop Com Interlocking Rod Stop Screw Washer
Stop Cam Pin
Name
.......................................................
...............................................
.............................
................................
..................................................
.........................
...................
................................................. .....................................
................................. ................................
................................
.....................................................
...........
..................................................
.....................................
....................
...........................
.......................................
...............................
.......................................
No.
2921
12162
1560C
11 IOC
20972
13710
136626
136627
457AL
1743J
59773
447AL
59774
50150A L
2921
12162
62169
136701
1527J
59776
13538
13539
13540
2026
59777
136702
223J
136629
136630 25263
136675
51188J
136632 25263
211J
175183 25263
1722J 25263
175184 25263
846C 25263
50087AL 25263
136633 25263
1747J
1654J
136634
237J
175032 25263
136636 25263
140431C
1747J
136676
136677
136699
136680
1282C
Plate
25263
25263
25263
25263
25263
25263
25263
25263
25263
25263
25263
23193
23193
25263
25263
25263
25263
25263
25263
25263
25263
25263
25263
23199
23199
25263
25263
25263
25263
25263
25263
25263
25263
25263
25263
25263
25263
25263
25263
PARTS FOR MACHINE No. 114-55
Tension Disc (2)
Tension Disc Guide Pin
Tension Regulating Thumb Nut
Tension Screw Stud..........................-
Tension Screw Stud 11 IOC with 1560C
Tension Spring
Tension Thread Guide
Thread Eyelet {top of arm)...................................................................
Thread Eyelet (top of arm) Set Screw
Thread Nipper (back) Adjusting Thumb Nut......................
Thread Nipper (back) Body.................................................................-
Thread Nipper (back) Body Set Screw.................................................
Thread Nipper (back) Cam with two 50150AL
Thread Nipper (back) Cam Set Screw (2)
Thread Nipper (back) Disc (2)
Thread Nipper (back) Disc Guide Pin
Thread Nipper (back) Disc Spring........................................................
Thread Nipper (bock) Eyelet................................................................
Thread Nipper (back) Lock Nut
Thread Nipper (back) Stud with 13538
Thread Nipper (back) Stud Position Pin
Thread Nipper (back) Stud Roller
Thread Nipper (back) Stud Roller Pin..................
Thread Nipper (back) Stud Spring
Thread Nipper (back) Stud complete, Nos. 13539, 13540
and59776
Thread Nipper (bock) complete. Nos. 1527J, 1743J, 2026,
59773,59777,62169, 136701 and two 2921
Thread Nipper (front) Cam
Thread Nipper (front) Cam Screw (2)...................................................
Thread Nipper (front) Lever.................................................................
Thread Nipper (front) Lever Bell Crank with 21IJ
Thread Nipper (front) Lever Bell Crank Bracket with 447AL
Thread Nipper (front) Lever Bell Crank Bracket Screw
Thread Nipper (front) Lever Bell Crank Hinge Stud
Thread Nipper (front) Lever Bell Crank Hinge Stud Set
Screw...............................................................................................
Thread Nipper (front) Lever Bell Crank Screw Stud
Thread Nipper (front) Lever Bell Crank Screw Stud Nut
Thread Nipper (front) Lever Bell Crank Screw Stud Nut
Washer
..........................................................................................
Thread Nipper (front) Lever Hinge Screw (left)....................................
Thread Nipper (front) Lever Hinge Screw (right)
Thread Nipper (front) Lever Rod .........................................................
Thread Nipper (front) Lever Rod Nut
Thread Nipper (front) Lever Rod Nut Lock Nut
Thread Nipper (front) Lever Rod Spring
Thread Nipper (front) Lever Rod Spring Collar with 237J....
Thread Nipper (front) Lever Rod Spring Collar Set Screw...
Thread Nipper (front) Lever Rod Spring Wosher
Thread Nipper (front) Thread Guide....................................................
Thread Nipper (front) Thread Guide Screw
Thread Nipper (front) Thread Guide Screw Nut..................................
Thread Nipper (front) and Thread Pull-off complete. Nos.
846C, 1282C, 1654J, 1722J, 12162, 13710, 20972,
50087AL, 136626, 136629, 136630, 136632, 136633,
136634, 136635, 136636, 136640, 136675,136677,
136680, 136681, 136699, 140431C, 175032, 175183,
175184 and two each 1747J, 2921 and 136682.
Thread Pull-off
Thread Pull-off Bell Crank with 51015AL
Thread Pull-off Beil Crank Connection.................................................
Thread Pull-off Bell Crank Connection Hinge Screw
Name
........................................
.........................
...................................-................................................
.....................................................-...............
......................
...... . .
.....................................
.............................................-...................
...........
.......................................................
-
-.....................-
...........................................................
.................................................
.............
.......................-.......................
...............-...........................
..................................................
....................................-......................
------------------------
..............................................
........................................................
.......................................................
...................................................
.............................................
...............................
.......................
...........
.................
.....................................
.......
...........
...................
...................
...........
..............
.......................... ........
................................
.......................
............................
...........................
.....................
.................................
...................................
................................
........................................
....................
...........................
.........
......
----------------
............
.
......
13
.
.
..