Singer 114-50, 114-51, 114-52, 114-53, 114-54 User Manual

Form

20484

(152)

PrintedinU.S.A.

LIST

OF

PARTS

MACHINES

Nos.

THE

114-50

SINGER

to

A

TRADE

MARK

MANUFACTURING

114-54

OF

COMPANY

INSTRUCTIONS

To

ensure easy

of the parts

requires oiling

or

"TYPED"OIL,

Company,

all oil holes

"TYPED"OIL is

should

FOR

running

which

and

and prevent unnecessary wear

are in movable contact, the machine

when in continuous use, 'TYPE B"

OILING

sold only by Singer Sewing Machine

be applied at least

marked

"OIL,"asinstructed in Form

stainless.

twice

each day to

20174.

Copyright, U. S. A., 7940. 1951

The Singer Manufacturing Company

All Rights

Reserved

for

All

and

1952 by

Countries

INDEX

Page

Attachments

and

Accessories

16

Button.Spacing Guide (adjustable) 16

Foot

Lifter

Machine

Machine Machine

Machine

Numerical

Parts

No.

114-50

No.

114-51

No.

114-52

No.

114-53

No.

114-54.....

ListofPorts

16

14

14 15

15 19

Starting Lever 17

Table

Belt

Thread

Guide

Unwinder

17

7

INSTRUCtlONS FOR ORDERING

In ordering from this list, use

the

FIRST

column.

ONLY

the

part

NUMBER

The number stamped on a Sewing Machine Part is in

every case the number of the single port only.

Everycombination of ports sent out as such has itsspecific

number, which, although not stamped on the ports, must be

used when ordering

Each number always indicates the SAME

ever list it

appears,

the

combination.

or for whatever machine.

PARTinwhat

The letters after some of the numbers indicate the style

of finish only, as follows:

A—Hardened, Polished, Nickel

A.A—Buffed

A.B—Hardened, Polished, Buffed

A.C—Brown

and

Chromium

Baking Enamel Finish

Plated

and

Buffed

Chromium

Plated

A.D—Gray Baking Enamel Finish

A.E—Hardened, Bright Rumbled

and

Nickel

Plated

A.F—Hardened, Bright Rumbled, Nickel Plated, BrightRumbled

and

Chromium

Plated

A.G—Alumilite, Plain

A.H—Alumilite, Dyed

A.J—Polished,

A.K—Hardened, Polished, Nickel

A.L—Heat

B—Polished, Nickel

Nickel

Treated

Plated

and

for Toughness

Plated

and

Chromium

Plated

and

Buffed

Plated

Chromium

Plated

C—Hardened Only

C.R—Hardened

D—Polished

E—Soft,

F—Hardened

F.J—Hardened,

G—Bright Rumbled

H—Blued

J—Nickel

K—Hardened

L—Brass

M—Oxidized

and

Only

Not

Polished

and

Polished

Plated Only

and

Plated

Merlized

Polished

and

Nickel

Plated

Nickel Plated

Plated

N—Japanned, Dull P—Japanned, Bright

P.P—Wrinkle

R—Merlized S—Cadmium

Finish

Plated

T—CopperPlated

T.A—Hardened, Polished,

T.B—Copper

and Nickel Plated

Copper

and

Nickel Plated

Polished

and

Buffed

T.J—Copperand Nickel Plated Only T.K—Hardened, Copper and NickelPlated T.L—Copper T.M—Copper Plated

and

BrassPlated

and

Oxidized

in

INSTRUCTIONS

FOR

ORDERING-Continued

U—Zinc

V—Silver

W—Polished

X—Black

X,C—Hardened

Y—Block

Z—Chromium

Z.A—Hardened, Polished, Nickel Plated, Buffed

Z.B—Polished, Nickel Plated, Buffed

Z.C—Hardened

Z.D—Polished

Z.G—Bright

ZJ—Nickel

Z.T—Copper

list;

Plated

Oxide,

Nickel Plated Only

Plated

and

Rumbled,

Chromium

and

These letters

and

AFTER

In

this

series:

1 to

1500,

Screv/

Numbers

1501to1800

1801to2000

2001

to

190000

are

numbers

and

Nickel

Plated

for Iron

and

Plated

Black

and

Steel

Oxide,

for Iron or Steel

and

Chromium Plated

and

Chromium

Plated

Chromium

MUSTBEUSED

the number as in

50001 to

and and

50000

and

Plated

Nickel

Plated,

Plated

v/hen they

the

51500

and

51501to51800 51801to52000

52001

to

Bright

list.

140001 to

ore are

140000

Nut

Roller

and

Rumbled

appear

Numbers

Sev/ing Machine Parts, 190001 and upward

of

Electrical

Parts.

The figures in the second column refer only to the plates,

are

illustrating the parts, and

Ports marked with an asterisk (*)

repairs

are

madeatfactory.

NOT TOBEUSED

are

furnished only when

Chromium

and

in the

142000

Numbers

are

142001

in ordering.

to

SINGER

These

Company's Trade Mark

NeedlesinContainers

are

NOT

Needles

in

SINGER

Needles

are

"FOR

and

marked

SINGER MACHINES"

SINGER

should

be

Machines.

their

Containers

with

the

"SIMANCO.**"

marked

made

needles.

used

1

2

SINGER

in

These

Needles

Company's

Needles

SINGER

are

marked

Trade

should

be

used

Machines.

and

their

Containers

with

the

Mark "SIMANCO.**" 1

NeedlesinContainers

"FOR

SINGER

are

NOT

SINGER

marked

MACHINES"

made

needles.

2

LIST

OF

PARTS

COMPLETE

MACHINE

FOR

SEWING TO24LIGNE. HOLE BUTTONS WITH A RIGHT STITCH. 21 STITCHES. BUTTON CLAMP VIBRATES

THE

CYLINDER.

SPEED

BBOE 59702 17703 50333AL

1520J

4449

59703

1036AL

59704 59705

446AL

TWO

OR FOUR-HOLE BUTTONS,

AAAKES

MANUALLY

1500

R.P.M.

Arm 124845 with

Arm

Dowel

Arm Oil Tube for

Arm Oil Tube for oiling 59705

ArmOil Tube for oiling Needle BarConnecting

(upper) Bearing -

Arm

Screw

Arm

Shaft

Arm

Shaft

ArmShaft (horizontal) Boshing(back) Adjusting Screw.

Arm Shaft (horizontol) Bushing (back) Adjusting Screw Nut.

Arm

Shaft

Arm

Shaft

Arm

Shaft

Arm Shaft (upright) Arm Shaft (upright) Bushing(lower) ArmShaft (upright) Bushing (lower) Set Screw

No.

TWO

PARALLEL BARS IN

OPERATED

4449,17844

Pin (2)

intermediate

(4)

(horizontal)

(horizontal) Bushing (back)

(horizontal) Bushing (front) (horizontal)

(horizontal)

114-50

ANGLE

THREAD

and

bearing

and

Gear

with two 1036AL

Gear

Set

FROM

FOUR-

CROSS-OVER

ACROSS

BREAKER.

two 164E

59706 (2)

Screw

(2)

14

Link

PARTS

FOR

MACHINE

No.

114-50

No. 59706

59707

1253AL

59708

1253AL

124674

18498 59795

59796

39222

63976

1255J

124712 124713

124714 124715

124716

50435J

124717

124718

1253AL

51224W

124719

124720

1403E

124902

124901

124903

50446D

56493 124846 136598 136599

17723

136600

45329

136601 136602

17723

136603

45329

136604

136605

17710

117dX

136606

63825

1175X

124906 136584

39241

17?13

1177X

17714

446AL

190J

184E

217J

792C 176J

228X

203X

190X

Plate

25266 25266

25266

25266 25266 25266 25266 25266 25266 25266

25266

25266 23195 23195 23195 23196

23i96

23196

23196 23196

23196

23196 23196 23196 23195

23195 23195

23195 23196

23196 23196 23197

23197 23197

23197

23197 23197 23197

23197

23197 23197 23197 23197 23197 23197 25269

25269 23197 23197 23197 23197

Bracket

with four

Screw

Plate

Name

Bushing

(upper)

Gear

(lower)with two 1253AL

Gear

(lower) Set Screw (2)

Gear

(upper) withtwo 1253AL

and

59796

Stud

56493

Handle

Shaft

Crank

Thumb

Screw

Bushing

with

1253AL...

ArmShaft (upright)

ArmShaft (upright) Bushing(upper) Set Screw ArmShaft (upright)

ArmShaft (upright)

ArmShaft (upright)Gear (upper) Set Screw (2)

Arm

Side

Arm Side Cover Screw (2)

Belt Cover Belt Cover Bracket with 184E Belt

Belt Cover Bracket Stud

BeltCover Screw (2)

Belt Shifter

BeltShifterClamp

BeltShifterClamp Screw(2)

Brake Brake

Broke Adjusting Plate

Brake Adjusting Plate Handle Brake Adjusting Plate Handle 124715 with 124717

BrakeAdjustingPlate Handle Hinge Screw BrakeAdjustingPlate Handle Shaft

Brake

BrakeAdjustingPlate HandleShaft Crank Set Screw

Brake Adjusting Plate ThumbScrew

Brake

Brake Arm

Brake Arm Hinge Screw Brake ArmReleasing Lever

Brake ArmReleasing Lever124902 with 124903 and two BrokeArmReleasing LeverBracket

BrakeArmReleasingLeverBracketScrew (2)

BrakeArmReleasing LeverScrew (2)

Brake Hinge Screw

Brake Pad (leather) (4)

Brake Spring

Cover

124712

Adjusting

792C

ButtonClamp (left) with 17723 and 45329

ButtonClamp (left) 136598 with 228Xand 136600

Button

Clamp (left)Screw Stud

Button

Clomp(left)Spring

Button

Clomp(left)Spring

Button

Clomp(left)SpringScrew

ButtonClomp (right) with 17723 ButtonClomp (right) 136601 with 228X

ButtonClomp (right) Screw Stud

Button

Clomp(right)Spring

Button

Clomp(right)Spring

Button

Clomp(right)SpringScrew

ButtonClomp Arm with 17714

Button

ClompArmcomplete, Nos. 136604,136606 and

two 203X ButtonClomp Arm Hinge Plate ButtonClomp Arm Hinge Plate Screw

ButtonClomp Arm Hook with63825

ButtonClompArmHookScrew (2)

ButtonClomp Arm HookStud ButtonClomp Hinge Screw (2)

Button

Clomp

ButtonClomp Lifter124906 with 330J and 124806

Button

Lifter

Clamp

Lifter

Clomp

Pressure

Clomp

Pressure

ClompPressureSpringBracketScrew

Clomp

Pressure

Position

Screw

Spring Spring

SpringGuide

and

Position

Bracket

45329

Block

and

136603

PARTS

FOR

/MACHINE

No.

114-50

No.

1178X

20437

39242

136705

136607

1181X

11 BOX 17718 17720

63741

1199X

136608

1183X

136609

136644 136646

62102

1547J

62103

3021

136645

136647

136610

62189

136611

136612

62185

136703

62111

1477J

124744

1477J

62113

1034J

124745

59711

59712

2107

9543

9544

9545

63940

63941

55381

63942 63943

63944 62115

1649C 1650C

104X

742F

190J

236J

164J

229J

208AL

641C

896AL

Plate

23197 23197 23197 23197 23197

23197

23197 23197 23197 23197

25261 25261 25261

25261

NOTE.

25270 25270 25270

25270

25270 25270 25270 25270 25270

25266

25266 25269

25269

25269 25269 25269

25269 25269

25269

25262

..........

25262

25262 25262

25262

ButtonClamp Pressure Spring Screw

ButtonClamp PressureSpring ScrewWasher

ButtonClamp ButtonClamp ButtonClamp ButtonClamp

Button

ClampSpreader

Button

Clamp Spreader LeverThumbScrew

Button

ClampSpreader

Button

ClampSpreader Steady Pin(2)

Button

Clamp Spreader ThumbPlate

Button

Clamp Spreader ThumbPlateScrew

Button

Clamp Stop withtwo 17720

ButtonClomp Stop Screw

Button

Clompcomplete, Nos. 104X,11

1199X, 17718,

136607,

Cloth

Plate

Cloth

Plate

Cloth

Plate

Cloth

Plate

Cloth

Plate

Cloth Plate Guide Block(right)

Cloth

Plate

Cloth

Plate

ClothPlate complete withButtonTray,Nos. 742F, 1547J,

62102,62103,136644

Cloth Plate complete (less button troy), Nos. 742F, 1547J,

62102,

Nos. 136645 and 136647 are furnished onlywhen ordered.

Cylinderwith 124719 Cylinder

Cylinder EndCover

CylinderEndCover136611with1034J,62113,62189,

CylinderEndCoverBracket

CylinderEndCoverBracket62185 with62111 and 124744.

CylinderEndCoverBracketHinge Pin CylinderEndCover BracketScrew(2) CylinderEndCover Hinge CylinderEndCover HingeScrew (2) CylinderEndCoverSpring

Cylinder EndCover Spring Screw

Cylinder Oil Well Cover

Cylinder Oil Well Cover Screw

Face

Face Plate complete, Nos. 208AL,9544,9545,59711 and

Face

Face Plate Thread Nipper Disc(2) Face Plate Thread Nipper DiscCover Face Plate Thread Nipper DiscCover Screw

Face Plate Thread Nipper DiscSpring

Feed

Feed Across Connection (lever Feed Across Connection (lever Feed Across Connection

Feed Across Connection (regulator end) 63942 with 63944.

Feed Across Connection (regulator end) Ball Stud

Feed AcrossConnectionAdjustingStud

Feed AcrossConnection Adjusting Stud Nut (left) Feed AcrossConnection Adjusting Stud Nut (right)

Feed Across Connection

62103,136646and

Bottom

136703

Plate

two

each

Plate

Across

Across Connection (lever

Name

Spreader Spreader Spreader Spreader

136608,136705

for for

Guide

Screw

Lever LeverHinge Screw LeverSpring

Lever

SpringScrewStud

Lever

Thumb

39242,63741,136599,136602,136605,

136645 136647

(2)

and

two 1175X

Block (left)

Block(left) Screw Nut

Screw

Block (right) Rivet(2)

and

two 3021

Cover

and

four

1477J

229J,

2107

and

Screw

Thread

Connection

Guard

9543

(2)

Screw

(lever

end)

end) end)

(regulator

Cap

Screw (4)

(2)

end) with two 896AL

ScrewWasher

BOX,

1181X,1183X,

with

two

896AL

63940

with 55381

BollStud

Ball Stud Set Screw

10

PARTS

FOR

MACHINE

No.

114-50

No.

62147

124676

17737

136613

136615

1094F

55300

1952

124865

124866

50599D

1676C

46244

17738

1188D

62121 50324C

1655E

14017

17741

136616

39231

1442C

1441AL 17997 18384

18384

1192C

62155

124874

1653C

17923

124747

136695 136617

59730 50306D

18368

934X

1654X

17806

1195X

8505

17742

62117

62187

160J

8589

1177D

17744 17743

1953

1655C

37310

1190C

17745

1191D

160J

453AL

Plate

25262

23197 23197 23197 23197 25262 25262

25262

25262 25262

25262

25262 25262 25262 25262

25262

23197 25270

25266 25266 25266

25270

25270 25270 25270 25270 25270

25270

23197

23197 23197

23197

23197 23197

23197

25262

25262 25262

25262

23197 23197

25262

25262 25262

23197 23197

23197

Feed

Across

Feed

Across

Feed Across Lever Hinge Stud

Feed Across Lever Hinge Stud Clamping Screw

Feed

Across

Feed

Across

Feed

Across

Feed

Across

Feed

Across

Feed AcrossRegulator Feed AcrossRegulator 124865 with 1188D, 1655E, 14017

and

50324C

Feed AcrossRegulatorAdjustingScrewStud

Across

Feed

Feed AcrossRegulator AdjustingScrew Stud Nut Washer

(fiber)

Feed Across Regulator Adjusting Screw Stud Nut Washer

(steel)

Feed AcrossRegulator HingeScrew

Feed Across Regulator Link

Feed Across Regulator Feed AcrossRegulator Feed Across Regulator

Feed AcrossRegulator

Feed Cam with 190J, 17874, 136628

and

1192C

Feed Cam DrivingWorm with 1441AL

FeedCam

Feed Cam DrivingWorm Set Screw

Feed Cam Driving Worm Wheel with 453AL

Feed Cam DrivingWorm Wheel Pin Feed Cam DrivingWorm Wheel Set Screw

Feed Cam Pin

Feed Cam Set Screw (2)

Feed Cam Shaft

Feed

Cam

Feed CamShaft Nut Feed Platefor four-hole buttons

Feed Plate for two-hole buttons

Feed Plate Carrier Bar

FeedPlateCarrierBar

Feed Plate Carrier BarPivot

FeedPlateCarrierBarPlate

FeedPlateCarrier BarPlateScrew FeedPlateCarrierBarPlateNut FeedPlate

FeedPlate

FeedPlateScrewStud

FeedRegulator

Feed

FeedRegulator

Feed

Feed RegulatorPost

Feed

FeedRegulator Feed

Feed Regulator

Feed

Shaft

17743, 18368,136613,136615, two 55300 and four

17806..;

Position

Screw

Regulator

Regulotor Regulator

Regulator

37310

Regulator

Name

Lever

with

641C

and

with

17737

17741

Stud

1952

Lever

62147

Lever

Plate

Plate Plate

Roller

with

Cover Screw

Lever Lever

LeverPlate Steady Pin(2)

Lever

Regulator AdjustingScrewStud Nut

Link

Screw Stud

Link

Screw Stud Nut

Link

Screw Stud Nut Washer

Link

Driving

62155

with

Bracket

Hinge

Roller

StopScrew

Swivel

Thumb

Stud

Worm

Position

with

136695

Stud(4)

Stud

Rivet

1953

with

62117

Cap

Dowel

Screw(2)

Stud

and ScrewStudwith1655Cand

and

Screw

and ScrewStud NutWasher

Screw

1653C

and U997.SZ...

with

934X,

Block

Screw

three160J

with

17742and 17745

Screw

(2)

StudNut

and

two

and

1195X,

each

1442C

223J

8505,

"""...

No.

136618 124761

124762

52045

1148AL

59707 59747

190J

1253AL

50150AL

136619

124764

50189C 59742

124765

50150AL

136620

39203

136588

377C

1518J

65135

1159E

62235

1293AL

446AL 136621 136622

195C

136623

1057AL

51933

136624

624AL

175547

218D

50138F

2058

17841

196AL

17842

453AL 136625

17844

164E

1201D

17845 39408 17846 32675 68784 68785

68786

51387R

200584D

68787 68788 68789

2022

68790

136596

17853

1262C

1662C

Plate

25266

25266 25266 25266 25266 25266 25266

25266

25266 25266 25266 25266 25266 25266 25266 25269 25269

25269 25269 25269

25269

25266 25266

25266

25266 25266 25266 25266 25266 25266 25266

25266 25266

25266 25269 25269 25275 25275 25269 25269 25275

25275

25275 25275 25275

..........

25275 25269

25266

25266 25266 25266 25266

25266

23i95

23195

PARTS FOR

MACHINE

Name

No.

114-50

Looper

Driving

Looper

LooperSet Screw

Looper

LooperShaft Bushing LooperShaft BushingSet Screw

LooperShaft Collar

LooperShaft Coupling with four 50150AL

LooperShaft Coupling Set Screw (4)

Needle

Needle Bar Connecting

65135

Needle Bar Connecting LinkHinge Screw

Needle

Needle Bar Connecting Stud with 1159E

Needle

Needle Needle Needle Needle Needle

Needle

Needle Guide Oscillating Crank with 1057AL

Shaft

Driving

Shaft

Driving

Shaftwith

Bar

Bar Connecting Link

Bushing

Shaft

Bushing

Shaft

ShaftGear withtwo

Shaft Gear Cover

ShaftGear CoverScrew(2)

Shaft Gear Set Screw(2)

50150AL

with

50138F

Packing

Bushing

Set Screw

and 59742

Link

39203 with 377C, 1518J and

(cotton)

1253AL

Bar Connecting Link Hinge Screw Nut

Bar Connecting Stud

Bar

Crank Crank Crdnk

with Cam

Cam

Wheel Wheel Wheel

Bar Bar Guide Guide

Guide

175547 with

Set

with Position Set

two

Screw

and

Set

446AL

Screw

195C

(2)

Screw

two

and

218D

Needle Guide OscillatingCrank Clamping Screw

Needle Guide Oscillating Crank Roller

Needle Guide Needle Guide

Needle Guide Thread Finger

Needle

Presser

Presser Bar Collar Set Screw (2)

Presser Presser

Presser Bar Lifting Lever Presser Bar LiftingLever Bracket Presser Bar Lifting Lever Bracket Screw (2) Presser Bar Lifting Lever Hinge Screw Presser Bar Lifting Lever Rod

Presser Bar LiftingLever Rod 17845 with 17846 Presser Bar LiftingLever Rod Chain

Presser Bar

Pulley(loose) 2

Pulley (loose) 68784 with 68786 Pulley (loose) Ball Bearing Pulley (loose) Pulley (loose) Oil Hole Plug Screw Pulley (loose) Spacing Collar

Pulley(tight) 2

Pulley (tight) 68788 with1206C Pulley(tight) Pin

Pulleys(ball bearing) complete, Nos. 51387R,68785,

68787

Set of Starting Lever Starting Lever Hinge Screw

Storting

Shaft Shaft

Guide

Thread Finger Screw (2)

Set

Screw

Bar

Collar

with

Bar

Guide Guide

Spring

Cap

3/4

Bracket Bracket

Screw

Bar

7/8

and

68789

Mated

Gears,

Lever

Hinge

Bushing

BushingSet Screw

two

196AL

with Set

in. diam. with 200584D

in.diam

for lower shaft, Nos. two

Screw

Nut

453AL

Screw

and

17854

1293AL

and

Stud

59707

11

51933..

12

PARTS

FOR

MACHINE

No.

114-50

No.

17854 17855

124784 124770

124904

124771

124772 124773

21828

50372D

1204E

17859

11622

19694

1695C

17861

1254C

1508J

17862

124774

17863 17864

1318J

68739

3012

1206C

2921

12162

1560C 11

20972 13710

136626

136627

1743J

59773

59774

50150AL

2921

12162

62169

136701

1527J 59776 13538 13539 13540

2026

59777

136702

136628

223J

136629

898J

IOC

457AL

447AL

25266

23195 23195

23195

23195 23195 23195 23195 23195

23196

23196 23196 23195 23195 23195

23195

23195 23195 25266

25266 25275 25275 25275 25275

25275 25275 25275 25275 25275 25275 25275 25266

25266

25275

25275 25275 25275

25275 25275 25275 25275 25275

25270 25270

25275

Plate

Stop

Cam

Stop Com Interlocking Rod Stop Com Interlocking RodCose Stop Com Interlocking Rod Cose 124784 with 124774,

124901

and

1255J

ond

Interlocking Interlocking

Not

Interlocking

Nipper

two

(bock)

(back)

(front)

Stop Com Interlocking Rod Cose 124770 with 63976

two

Stop Com Interlocking RodCose 124904 with 1318J,

17855,17863,17864,39222

Stop Com Interlocking RodCose Brocket

Stop ComInterlockingRodCose Brocketcomplete, Nos.

1182E, 1196AL, 1204E, 1254C, 1262C, 1508J, 1662C, 17853,17859,17861,

124772

Stop

Com Interlocking Rod

Stop

Com Interlocking RodCose Bracket Screw

Stop

Com Interlocking RodCose Hinge Screw

Stop

Com Interlocking Rod

Stop ComInterlockingRodCose Socket Joint Cop Screw

(2)

Stop ComInterlockingRodCoseSpring

Stop ComInterlockingRodCose Spring Hook Stop ComInterlocking RodCoseSpring Hook Stop Com Interlocking RodCose Stop Stud

StopCom StopCom

Lock

StopCom

Stop ComInterlocking RodCose Weoring Stop Com InterlockingRodSpring

Stop Com Interlocking RodStop Stop ComInterlocking RodStop Screw Stop Com Interlocking RodStop ScrewWosher

Stop Com Pin.....

Stop Com Screw Tension Disc(2)

TensionDiscGuide Pin

TensionRegulotingThumb Nut

TensionScrewStud TensionScrewStud 11IOCwith 1560C

TensionSpring TensionThreod Guide

Thread Eyelet(top of arm) ThreadEyelet(topof arm)Set Screw

Threod

ThreadNipper(back)

Thread Nipper (back) Camwithtwo

ThreodNipper (bock)ComSet Screw(2)

ThreodNipper (bock)

Threod Nipper (bock)

ThreodNipper(bock)

ThreadNipper

ThreadNipper(back)

ThreadNipper(back)Stud ThreadNipper(back)Stud ThreadNipper(back)Stud

Thread Nipper(bock)Stud

Threod

and 59776

Thread

59773, 59777,62169,136701 ond two2921

ThreadNipper

Thread

ThreadNipper

Name

176J

ond

68739

17862,17873,68783,124771,

898J

Cose

Bracket Dowel Pin

Cose

Socket Joint

Rod

CoseStop Stud Screw

Rod

CoseStop Stud Screw

Rod

CoseStop Stud Spring

Adjusting

Body

Disc

Eyelet

Lock

Stud

complete,

Cam

Thumb

SetScrew

(2)

Guide Pin

Spring

Nut with

13538 Position Roller

Roller

Spring

complete,

Nos.

Screw

(2)

Nut

50150AL

Nos.

1527J, 1743J,

Lever

Lock

Nut

Bushing.

Bushing

Block

13539,13540

2026,

and

PARTS

FOR

MACHINE

No.

114-50

13

No.

136630 136631

51188J

136632

211J

175183

1722J

175184

846C

50087AL

136633

1747J 1654J

136634 136635

237J

175032 136636 140431C

1747J

136637

136677

136699 124680

1282C 1282C

136640

447AL

51015AL

124625

42808 62171

337J

62172

124626

691F 136683 124806

330J

1207D

136684

136685

641C 136686

39456

1302J

136643

691F

68783

68781 68782

203J

1196AL

17873

1182E

17874

190J

Plate

25275 25275 25275

25275

25275 25275

25275

25275 25275

25275 25275 25275 25275

25275

25275 25275 25275 25269 25269 25269 25269

25269

25269 25269 25269 25269

25269 25269

25269 25269 25270 25270

23195

23195 23195

23195

23195 23195 25270

25270

Thread Nipper (front)LeverBellCrank with 211J Thread Nipper (front)LeverBellCrank Bracketwith447AL Thread Nipper (front)LeverBellCrank BracketScrew

Thread Nipper (front) Thread Nipper (front)

Screw

Thread Nipper (front) LeverBellCrankScrewStud Thread Nipper (front) LeverBellCrank ScrewStud Nut

Thread Nipper (front) LeverBellCrank Screw Stud Nut

Washer

Name

Lever

BellCrankHingeStud

Lever

BellCrankHingeStud Set

Thread Nipper (front) LeverHinge Screw (left) Thread Nipper (front) LeverHinge Screw (right)

Thread Nipper (front) Lever Rod Thread Nipper (front) Lever Rod Nut

Thread Nipper (front)LeverRodNut

Thread Nipper (front) LeverRodSpring

Thread Nipper (front) LeverRod Spring Collar with 237J....

Thread Nipper (front) LeverRodSpring Collar Set Screw....

Thread Nipper (front) LeverRodSpring Washer

Thread Nipper (front) Thread Guide

Thread Nipper (front) Thread Guide Screw Thread Nipper (front) Thread Guide Screw Nut

Thread Nipper (front) and Thread

846C,

1282C,

50087AL,

136632,136633,136634,136635, 136677,136699,140431C,

and

two

Thread

Thread Pull-offBellCrank Connection Hinge Screw (lower).

Thread

Thread Pull-off Bell Crank Hinge Stud Thread Pull-off BellCrank Hinge Stud Set Screw

Thread

Thread Take-up Bodywith62172

Thread Take-up Roller

Thread Take-up RollerCap Thread Take-up RollerCap Screw

Thread Take-up Roller Pin

Thread Take-up complete, Nos. 337J, 42808,62171 and

124625

Thread Take-up Screw

Thread Wiper Body Thread Wiper Body Finger Thread Wiper Body Finger Screw Thread Wiper Body Hinge Screw

Thread Wiper Body Support

Thread Wiper BodySupport 136684 with1207D, 1302J,

39456,136683

Thread Wiper BodySupport Set Screw

Thread Wiper BodyWire Thread Wiper Body Wire Clamp Thread Wiper BodyWire Clomp Screw

Throat

TripLever(adjustable) complete, Nos. 203J, 68781 and

68782

TripLeverReleaser (stop motion)

TripLeverTripper TripLeverTripper Adjusting Screw

Trip LeverHinge Screw

TripLeverSpring Trip LeverSpring Screw

Tripping Point Tripping Point Screw

1654J, 1722J,

124680,136626,136629,136630,136631,

each

1747J

Pull-off

Pull-off Bell

Plate

Screw

and

Bell

Crank

with

Connection

Bell

BellCrank Connection Hinge Screw (upper).

Crank

Set

and

136686

(4)

Lock

Nut

Pull-off

12162,13710,

175032,175183,175184

2921

51015AL

Screw

complete, Nos.

136636,

20972,

136640,

14

No.

136648

136503

136504

136505

136649

136650

124925

124926 124927

136651

MACHINE

FOR

SEWING

16

STITCHES

114-50.

This

machineisthe

TWO

INSTEAD

following exceptions:

Plate

25271

25267

25271

Feed

136649, in

FeedCam

of

Feed

FeedCamShaft62155

of

Thread Nipper (front)Cam

MACHINE

FOR

SEWING

14

STITCHES INSTEAD OF

114-50.

TWO

This machine is the

following exceptions:

25272

25268

25272

Feed

four223J, in place of 136616

FeedCam

of

Feed Com DrivingWorm Wheel with 453AL

Feed

of

Thread Nipper (front) Cam (2)

No.

114-51

OR

FOUR-HOLE

OF

21.

someasthe

Cam with two

place

Driving

39231

Cam Driving

124874

No.

OR FOUR-HOLE BUTTONS. MAKES

21.

same

as the 114-50 Machine but with

Cam with two

Driving

39231

Cam

Shaft62155

124874

OTHERWISE

114-50

Machine

Name

each

190J, 223J, 1192C,

of 136616

Worm

with

Worm

Wheel

with

114-52

OTHERWISE

each

190J, 1192C,

Worm

with

BUTTONS.

SAME

but

1441AL

with 453AL

1653Cand 136504,inplace

SAME

1441AL

1653C

and

MAKES

AS

with

the

17874

and

and 1442C,in place

AS

the

17874,136651

and

and 1442C,in place

124926,

inplace

15

No.

136652

136653

136503

136504

136505

62297

136649

MACHINE

FOR

SEWING

21

CROSS

This

machineisthe

TWO

STITCHES.

following exceptions:

Plate

25273

Feed

and

MACHINE

FOR

SEWING

16

STITCHES

114-53

This

machineisthe

TWO

INSTEAD

MACHINE.

following exceptions:

25274

25267

25274

Feed Cam with two

136649, in place of 136616

Feed Cam

of

Feed

Feed CamShaft 62155 with 1653C and 136504, in place

of

Feed Plate for four-hole buttons, in place of 17923

Thread Nipper (front) Cam

No.

114-53

OR

FOUR-HOLE

OTHERWISE

sameasthe

Cam

with

SAMEAS114-50.

114-50

Name

190J,

17874,136628

1192C, in place of 136616

No.

114-54

OR

FOUR-HOLE

OF

21.

OTHERWISE

sameasthe

114-50

each

Driving

39231

Wormwith

Cam Driving Worm

124874

BUTTONS.

Machine

BUTTONS.

Machine

190J,

223J,

1441AL

Wheel

MAKES

but

with

and

two

MAKES

SAME

but

with

1192C,

and 1442C, in place

with 453AL

the

each

AS

the

17874

223J

and

SINGER

These

Company's

NeedlesinContainers

are

NOT

in

Needles

"FOR

Needles

SINGER

are

marked

Trade

SINGER

should

Machines.

and

their

with

Mark

"SIMANCO.**" 1

MACHINES"

made

be

Containers

the

marked

needles.

used

2