SINGER 114-34 User Manual

Form 18361/ Revised ( 1040 ) Printed in U. S. A.

LIST

PARTS

. I

MACHINES

Nos. 114-32, 114-33, 114-34

and 114-35

THE SINGER MANUFACTURING COMPANY

INSTRUCTIONS FOR OILING

To Insure easy running and prevent unnecessary wear of the parts which are In movable contact, the machine re quires oiling, and when In continuous use It must be oiled

at least once each day with Singer "Oil Tor High Speed Sew

ing Machines (Cloth and Leather)" for general use, or

"Stainless Oil for High Speed Sewing Machines" where a

stainless oil Is desired.

To reach the oiling points under the machine bed, re move the two front screws In the machine base; turn the ma chine back on Its hinges and pull out the cover on the underside of the machine bed.

INDEX

Page

Attachments and Accessories................................................................................... 33

Button Spacing Gauges........................................................................................ 34

Eye and Finger Guard.............................................................................................. 35

Foot Lifter Parts......................................................................................... 3®

Machine No. ...................................................................................................... 5

Machine No. 114-33......................................................................................... 18

Machine No. 114-34..................................................................................... 31

Machine No. 114-35...................................................................................... 32

Numerical List of Parts........................................................................................... 39

Starting Lever....................................................................................................... 36

Table Belt Guide

Thread Unwinder................................................................................................ 37

..................................................................................................

by The Singer Manufacturing Co.

INSTRUCTIONS FOR ORDERING

In ordering from this list, use CWLY the port NUMBER In the

FIRST column.

The number etanped on a Sewing Machine Fart la In every caae

the number of the single part only.

Every combination of parta sent out as such has Its specific number, which, although not stamped on the parts, must be used when ordering the combination.

Each nunt>er always Indicates the 3A№ PART In whatever list It appears, or for whatever machine.

The letters after some of the numbers indicate the style of finish only, as follows:

A-Hardened, Polished, Nickel Plated and Buffed A.A-Buffed and Chromium Plated A.B-Hardened, Polished, Buffed and Chromium Plated A.C'Brown Baking Enamel Finish A.D-Qray Baking Enamel Finish A.E-Kardened, Bright Rumbled and Nickel Plated A.F-Hardened, Bright Rumbled, Nickel Plated, Brlÿit Runhled and

Chromium Plated B-Pollshed, Nickel Plated and Buffed C-Hardened Only

C.R-Uardeued and Merllzed

D-Pollshed Only E-Soft, Not Polished F-Hardened and Polished

F.J-Hardened, Polished and Nickel Plated

Q-Brlght Rumbled and Nickel Plated B-Blued J-Nlckel Plated Only K-Hardened and Nickel Plated L-Braes Plated M-Oxldlzed

N-Japanned, Dull P-Japanned, Bright

P.P-Urlnkle Finish

R-Merllzed S-Cadmlun Plated T-Copper Plated

T.A-Hardened, Polished, Copper and Nickel Plated and Buffed T.B-Copper and Nickel Plated and Polished T.J-Copper and Nickel Plated Only

T.K-Hardened, Copper and Nickel Plated T.L-Copper and Brass Plated T.M-Copper Plated and Cttldlzed

U-Zloc Plated V-3Uver Plated W-Pollshed and Nickel Plated X-Black Qzlde, for Iron and Steel

l.C-Hardened and Black Oxide, for Iron or Steel

T-Black Nickel Plated Only

Z-ChronliiB Plated Z.A-Hardened,Polished,Nickel Plated,Buffed and Chromium Plated Z.B-Pollshed, Nickel Plated, Buffed and ChroraliBO Plated Z.C-Hardened and Chromium Plated Z.D-Pollshed and Chromium Plated Z.O-Bright Rumbled, Nickel Plated, Brl^t Rumbled and Chromium Plated Z.J-Nlckel and Chromium Plated Z.T-Copper and Chromium Plated

These letters MUST EE USED when they appear In the list; and

AFTER the nujober as In the Hat.

In this series:

The figures in the second colunn refer only to the plates.

Illustrating the parts, and are NOT TO BE USED In ordering.

Parts marked with an asterisk (•) are furnished only when

repairs are made at factory.

1 to 1500, 50001 to 51500 and 140001 to 142000 are Screw Nwbers 1501 to 1800 and 51501 to 51600 are Nut Niaabers 1801 to 2000 and 61801 to 52000 are Roller Numbers 2001 to 50000 and 52001 to 140000 and 142001 to 190000 are Sewing Machine Parts, 190001 and upward are numbers of Electrical Parts.

LIST OF PARTS COMPLETE

FOR

/MACHINE No. 114-32

For Sewing Two or Four Hole Flat Buttons, from 10 to 50 ligne. Makes two parallel bars in four hole buttons, 14 stitches, including cross and fastening stitches. Thread cutter. Clamp vibrates ACROSS the cylinder. Will hold button and material up to Yie inch thick and can be adjusted for buttons with holes

%4 inch to ^16 inch apart. Speed 1500 R. P. M.

No.

*124845

*124625

16532

4448

56015 23178

136594

880E

59702

*136541

17703

Plate

23178 23178

23178

Arra.

each 164E and 15405.

Arm

■

Oil Tube, for Intermediate bearing..

" “ " oiling 59705 and 59706

• • * * Needle Bar Con

necting Link (upper) Bearing

Arm

Shaft (horizontal).

62235 and 68717.

Arm

Name

...................................

5970e with 59774,

PARTS FOR MACHINE No. 114 32

PARTS FOR MACHINE No. 114-32

No.

50333C

1520J

59703

1036C 23178 Arm 59704 59705

4400

59706

44 6C 23178

Plate

2.3178 Ar-m

23178 Arm

23178

Arm

Shaft (horizontal) Bushing (back) Adjusting Screw Shaft (horizontal) Bushing (back) Adjusting Screw Nut Shaft (horizontal) Gear with two 1036C

......................................................................

Name

......................................................

...............................................

Shaft (horizontal) Gear Set Screw...

23178 “ (upright)...........................................................

23178 23178

23178

“ “ Bushing (lower)

II H fl n

Screw

Arm

.......................................................................

Shaft (upright) Bushing (upper)

“ “ " " Set

............................................

Screw........................................................................

59707 23178 Arm

Shaft (upright) Gear (lower) with

two 1253C................................................................

1253C 23178 Arm

Shaft (upright) Gear (lower) Set

Screw........................................................................

59708 23178 Arm Shaft (upright) Gear (upper) with

1253C

23178

Arm

124674 23178 Arm

19 OJ 23178

18498

23178 Belt Cover

59795 23178

184E 23178

59796 23178

23178

217J

39222 213153

63976 23153

1255D 23153

124712

9596 Brake.................................................................................

124713

124714 9596 124715 9596

124716

two 1253C

Shaft (upright) Gear (upper) Set Screw

Side Cover................................................................

H H

" 1247T2 four 56493

N H

...............................................................

.......................................................................

" " Screw.............................................................

.........................................................................

“ Bracket with 184E and 59796.. “ “ Screw Stud " * Stud “ Screw

..................................................

.............................................................

Shifter.....................................................................

" C lamp..........................................................

" • Screw

........................................................

___________________

Adjusting Plate....................................................

" " Handle..................................................

* " * 124715'with

124717.....................................................................

50435J 9596 124717 9596 124718 9596

1253C 9596

Brake Adjusting Plate Handle Hinge Screw

with 12330

" " " Shaft

................................................

“ ■ “ * Crank

...............................................................

Brake Adjusting Plate Handle Shaft ({rank

Set Screw...j.............................................................

51224W

124719

124720

1403D 9596

124902

124901

9596 Brake Adjusting Plate Thumb Screw 9596 9596

23153

* « . . Bushing

Arm......................................................................

* Hinge Screw..................................................

* Releasing Lever.............................................

" " " 124902 with

124903 and two 792C

.............................................

124903 23153 Brake Arm Releasing Lever Bracket

..............................

_____

...............................

No. Plate

792C

176J 23153

23153

" " " " Screw

50446D 9596 " Hinge Screw

56493 9596

124846

9596

* Pad (leather)

“ Spring..........................................................................

39238 23168 39239 23168

124732

17710 23168

1176J

124780 23168

1175E 23168

124906

190J 23188

124711

23168

" * Hinge Plate

23168

" " " ” " screw..............................................................

* * " Hook

“ “ Hinge Screw.................................•

23188

" * Lifter......................................................................

* ■ “ Screw..................................................................

23190 * * Locking Device Latch with

two 1057J..................................................................

1057J

23190

Button Clamp Locking Device Latch Clamp

ing Screw 124678 124679

23190 23190

UN a a a a

Crank.........................................................................

124680 23190

Button Clamp Locking Device Latch Shaft

Crank Connection......................................................

1282C

1288C

124823

23190

Button Clamp Locking Device Latch Shaft

Crank Pin 124733 124734

1182J

23168

23168 124735 23188 124r36

23188

Button Clamp Opening Lever

* * * * Bracket

a a a a a a

Arm............................................................................

50117J

23188

Button Clamp Opening Lever Contact Piece

Arm Screw.................................................................

1484J

23188

Button Clamp Opening Lever Contact Piece

Screw

17718

23188

Button Clamp Opening Lever Contact Piece

Screw Washer............................................................

99R 23168

39241

23168

17713 23168

1177D 23168

17714

1178D

20437

23168 23168 23168

39242 23168

124737 23168

* " Pressure Spring......................................................

* * • • « Screw

• « * ■ Oulde Block " * • " Screw * * * • • yasher

" " Spreader

* * * Lever...................................................................

Brake Arm Releasing Lever Bracket Screw.

Name

..................................................................

...............................................................

Button Clamp (left) with 9311 and 17723.

• “ (right) with 9311 and 17723

" " Arm with 17714 and 124780..

............................................................

...................................................................

........................

..................................................................

Button Clamp Locking Device Latch Shaft.

Button Clamp Locking Device Latch Shaft

Crank Connection Hinge Screw (lower)

Button Clamp Locking Device Latch Shaft

Crank Connection Hinge Screw (upper)

...................................................................

............................................

............................................................

" " * • « Screw

" “ • “ Contact Piece

.........................................................................

Button Clamp Opening Lever Hinge Screw..

* • * * Bracket....

................................................................

.................................................................

PARTS FOR MACHINE No. 114-32

No. Plate Name

124738 23168 Button Clamp Spreader Lever Adjusting

Plate..........................................................................

1182J 23168 Button Clamp Spreader Lever Adjusting

Plate Screw

..............................................................

17718 23168 Button Clamp Spreader Lever Adjusting

Plate Screw Washer.................................................

124739 23168 Button Clamp Spreader Lever Stop............................................

50237F 23168 - » . n . pogltlon

Screw........................................................................

1182J 23168 Button Clamp Spreader Lever Stop Screw..

17718 23168 « « « .

Washer......................................................................

1162J 23168 Button Clamp Spreader Screw....................................................

17719 23168 * * “ Spring......................................

1181J 23168 « « . .

17720 23168 « « II Steady Pin..........................................................

39244 23168 " * Spring (left)...............................................

39245 23168 " " " (right)

226J 23168 " “ ” Screw

9311 23168 " " “ Steady Pin

39248 23168 " " Stop with two 17720

1183J 23168 " * " Screw

.................................

.........................

....................

.............................................

17723 23168 “ " Stud...................................................

124740

--------

Button Clamp complete. Nos. 99R, 1181J,

11B3J, 17719, 39238, 39239, 39242, 39244,39245,39248,50237F,124732 to 124734, 124737 to 124739, two each 226J, 1175E, 17718 and five 1182J...

62102 23182 Cloth Plate Guide Block (left)....................................................

742F 23182 . • « « . screw

_________

1547J 23182 . « . . .11

62103 23182 «... (right)

......................

3021 23182 ...» . Rivet...

19CJ 23182 " “ Screw.......................................................

62104 23182 " " Stop 26770 23182 ” * " Rivet

.........................................................

.................................................

62182 23182 Cloth Plate complete, Nos. 742F, 1547J,

26770, 62102 to 62104 and two 3021..

*124741

62189 23182 * Bottom Cover

124742 23182 ' End Cover

..........

Cylinder with 124719................................................................

.......................................................

..............................................................

124743 23182 * * “ 124742 with 1034D,

62111,62113,62185,62189,124744 and

four 1477D...............................................................

62185 23182 Cylinder End Cover Bracket 62111 23182 " • • • Hinge Pin

1477D 23182 “ « » • Screw

124744 23182 * “ " Hinge

1477D 23182 " ... screw

......................................................

62113 23182 * * • Spring

....................................

_______

....................

.......................................

......................................

No.

10340

124745

Plate 23182 23178

2360 23178

59711

23108

59712 23188

164J 23188

2290

2060

23188 23188 23168 23188 23166

2107

9543 9544

9545 23188

63940

23192

63941

55381

641C

63942

63943

63944

62115

1649C

165QC

896E

62147

124676

17737

160J

62118 23168 62119

1094F

55300 23168

1952 124665 124866

505990

1676C

PARTS FOR MACHINE No. 114-32

Cylinder End Cover Spring Screw.....................................

' Oil Well Cover

• ... Screw

Face Plate

...........................................................................

Face Plate complete. Nos.2080,9544,9545,

59711 and two each 2290, 2107 and

9543...........................................................................

Face Plate Screw........................................................

“ “ Thread Guard............................

* " “ " Screw

* " ' Nipper Disc.......................

“ " " . « Cover

■ • « ...

" * " . . Spring....

Feed Across Connection (lever end) with

two 896E...................................................................

Feed Across Connection (lever end) 63940

with 55381.................................................................

23192

Feed Across Connection (lever end) Ball

Stud............................................................................

23192

Feed Across Connection (lever end) Ball

Stud Set Screw

23192

Feed Across Connection (regulator end)

with two ....................................................................

Feed Across Connection (regulator end)

63942 with 63944

23192

Feed Across Connection (regulator end)

Ball Stud....................................................................

23192 23192

23192

Feed Across Connection Adjusting Stud...

" « • * “Nut

(left)

..........................................................................

Feed Across Connection Adjusting Stud

Nut (right)..................................................................

23192

Feed Across Connection Cap Screw

“ ' Lever with 641C and 1952....

" " ” 62147 with 17737 23192 23192

" " “ Hinge Stud

" ' “ " “ Clamping

Screw.........................................................................

Feed Across Lever Plate with 17741.................................

23168

" * " “ Cover

“ * ' " Screw

’ ' • ‘ Steady Pin 23192

23192

* ' * Roller and Stud

" " Regulator..................................................

* ' * 124865 with 11880,

1655E, 14017 and 5O024C

23192

Peed Across Regulator Adjusting Screw

Stud

...........................................................................

Feed Across Regulator Adjusting Screw

Stud Nut

Name

.......................................................

......................................................

..........................

.............

..........................................................

.....................................................

..................................

......................

.................................

...........................

.........................

..............................

......................................

....................................................................

PARTS FOR MACHINE No. 114-32

No. Plate

4:6244 23192

1Г738

1188D

23192

Feed Across Regulator Adjusting Screw

Feed Across

Feed Across Regulator Hinge Screw 62121 23192 50324C

1655E

14017

23192 23192 23192

17741 23166 Feed

124923

23182

124925 23178 Feed

14420 23178

Feed Cara Driving Worm Position Screw....

1441C 23178

124926

18384

453C

18364

1192C

62155

23182 23182 23182 23182 23182 23182

124927

1653C

62297

23182 23168

Feed Cara Shaft Nut.............................................................................................

124747

62123 23168

59730 23168

934J

23168 23168 23168 23168 23168 23168

503060

18368

1654C

17806

1195E

Feed Plate

8505 23168

160J

23192 23192 23192 23192 23192 23168

2.3168 23192

17742 62117

8589

1177D 17744 17743

1953

Name

Stud Nut Washer (fibre)

..........................................

Regulator Adjusting Screw

Stud Nut Washer (steel)

N Я II я

..........................................

.............................

" Link

...........................................

' " Screw Stud... ' * ” * Nut

Я Я Я Я Я

Washer.

Across Regulator Link Stud

Cara with two each 190J,11920,17874,

124929,

124930 and eight 335J

..............................

..........................

Cam Driving Worm with 1441C and

1442C..

Я Я

" " Set Screw.........................................

" " Wheel with 453C...

* " ’ Pin

“ Pin

....................................................................

“ Set Screw

" Shaft................................................................................................................

.................................................

" " " Set Screw...

..........................................................

“ 62155 with 1653C and

124926.

я Я

я я

1094F, 62118,

for four hole buttons

Plate,

" two hole buttons......................................................

’ " 10445 with 934J,

1195E, 8505, 17743, 18368, 62119, two 55300 and four

..................................................

T7ROfi .

П я

м я

я я

н Я

Carrier Bar Pivot Block

" " * * Screw

* “ Plate.............................................................................

" “ “ Screw

Nut.....................................................................................................

Position stud............................................................................

я я

Screw Stud

................................................................................

" “ Rivet..................................................................................

Regulator with 1953..............................................................................

Bracket with three 160J..

“ Cap Screw " Dowel Pin

" Screw...............................................................

Hinge Stud.................................................................

Post....................................................................................

Roller and Screw Stud with

..............................................

...........................................

..................................................

...................................................

1655С and 14017.........................................................................................

PARTS FOR MACHINE No. 114-32

No.

1655C 23192

14017

Plate

23192

Feed Regulator Roller and Screw Stud Nut

Narae

N > N « M if

Washer.......................................................................

1190C 23168 Feed Regulator Stop Screw.............................................

17745

23168

1191D 23168

124907 23186

665J 23186

124988

23186

124977 23178

124824 23186

124797 124752

23186

Khlfe...................................................................................

Loop Finger........................................................................

H H

“ Swivel......................................................

“ Thumb Screw ..........................................

Screw

....................................................................

* Cam with 50274C

.........................................

“ Carrier............................................................

“ “ 124824 with 124753..

“ " Crank with 2O0J and

124755.......................................................................

23186

208J

124753 23186

200J 23186

124754 23186

124791

124755 23186

218J 23186

124757

23186

124978 23178

50150C 23178 50183D

51866

23186

124759 23178

229J 23186

124849 23186

208D 23186

62298

23178

124761 23178

124762 23178

52045 23178

Loop Finger Carrier Crank Clamping Screw

* " Holder...............................................

• “ " Screw.......................................................

" " Pitman with four

218J

...........................................................................

Loop Finger Carrier Pitman 124754 with

124752 and 124757

Loop Finger Carrier Pitman Ball Stud....

" “ “ Capscrew....

“ Driver with 51868 and 124755

“ " Cam with two 50150C. .•

' « • 3q^. screv,................................................

* ’ Hinge Screw

“ “ Roller and Stud

" Rooking Frame

* Screw

Guard....................................................................

" Screw............................................................

Looper with 34418.............................................................

Driving Shaft......................................................

Я Я

* “ Bushing

' ■ " Racking

..................................................

..............................................

.........................................

............................................

..........................................................

................................................

(cotton).....................................................................

1143C 23178 Looper Driving Shaft Bushing Set Screw.. 59707 23178 59747 23178

190J 23178

1253C 23178 50274C 23178

124763 23178 124764 23178

50189C

124765

23178 23178

50150C 23178

34418 23176

62299

23188

я я

* * Gear with two 1253C

' * " Cover

..................................................

' • » « Screw...

' « » Screw..................................................

Set Screw

...........................................................

Shaft...................................................................

“ Bushing......................................................

" " Set Screw.................................................

* Coupling with four 50150C.. " * Set Screw

................................................

Washer................................................................

Needle Ваг with 1072F......................................................

.........

No.

136580

377C

Plate 23188

23188

1518J 23188

65135

62235

391E

23188

23178

1293C 23178

446C 23178

124794

23188

124795

124796 23188

853C 23188

42639

1449H

23188

23188 124821 23188 124979

23178 124980 23178

465C 23178

2273

124767

23178

23178 124983

59761 23178

23178

465C

124602 23178

51857

23178 124974

124698 23178

124699 23178

1253C 23178

59765

23178

59766 23178

624C 23178

233J 23178

124768 23178

23178

233J

1072F 23188

2058

124838

23188

23190

PARTS FOR MACHINE No. 114-32

Nanie

Needle Bar Connecting Link with 37?3,

1518J and 65135

Needle Bar Connecting Link Hinge Screw..

• II > « « . ' " " Stud with 391E

.....................................................

_____________

" " “ “ Setscrew....

" " Crank Wheel with 446C and

1293C......................................................................

Needle Bar Crank Wheel Position Screw...

" " " ' Set Screw

..........................

" “ Thread Retainer...........................................

Needle Bar Thread Retainer complete, Nos.

1449H, 124794, 124796 and 124821....

Needle Bar Thread Retainer Bracket with

853C and two 42639

...............................................

Needle Bar Thread Retainer Bracket Set

Screw

.......................................................................

Needle Bar Thread Retainer Position Pin.

" " " " Screw

" " " " Spring...................

“ Guard............................................................

“ " Cam with two 465C

..................................

" " “ Set Screw.......................................

" " Pin " " Shaft

................................................

" " " 124767 with 2273 and

124979.....................................................................

Needle Guard Shaft Collar with two 465C.

" " “ “ Set Screw " " " Crank with 124974 and

two 1253C...............................................................

Needle Guard Shaft Crank Roller

....................................

Needle Guard Shaft Crank Roller complete.

Nos. 51857, 124698 and 124699

Needle Guard Shaft Crank Roller Bushing.

N « N H M M

............................

Stud..........................................................................

Needle Guard Shaft Crank Set Screw

" " " Spring

..............................

..........................................

“ " ‘ • Collar with

624C

........................................................................

Needle Guard Shaft Spring Collar Set

Screw

.......................................................................

Needle Guard Shaft Spring Screw....................................

‘ “ Spreader ’ “ “ Screw

....................................................

......................................

" Set Screw................................................................

Presser Bar........................................................................

" “ Collar and Thread Pull-off

Bracket with two 196C............................................

...................

....................

No.

196C

17842

453C 124790 124839

1201D 17845 17846

32675 68712

164E

Plate 23190 23188 23188 23190 23190 23190 23190 23190 23190 23188 23178

68713 68714 68715 51387R

200584D

68716

23178

23178 23178 23178 23178

68720

2022

23178

68717

17853 23153

1262C 23153 1662C 23153

17854 23178

17855 23153 124784 23153 124770

124904

124771

124772

--------

...........

23153

124773

21828 23153

50372D 23153

1204E 23153

17859 23153

PARTS FOR MACHINE No, 114-32

Name

Presser Bar Collar Set Screw

...................................

" Guide Bracket with 453C. “ * “ Set Screw.

* Lifting Lever.................................

* * “ Bracket... " " • • Screw.

’ • * ' Hinge Screw...

• • Rod

..........................

“ ' • « Chain

" “ Spring.........................................................

Pulley (loose) 2 3/4 In. dlam., with

200584D

...................................................................

Pulley (loose) 68712 with 68714.......................................

" " Ball Bearing.............................................

• * Bushing....................................................

" “ Cap Screw................................................

" " Oil Hole Plug Screw................................

• (tight) 2 7/8 In. dlam

.........................................

" " 68716 with 1206C and

17854........................................................................

Pulley (tight) Pin................................................................

Pulleys (ball bearing) complete. Nos.

51387R, 68713, 68715 and 68720

...........................

Starting Lever.....................................................................

• “ Hinge Screw * . . « Hut

................................

.............................

Stop Cam............................................................................

" " Interlocking Rod

• “ ' “ Case

...............................................

...........................

" " * • * 124784

with 124774, 124901 and two 176J....

Stop Cara Interlocking Rod Case 124770

with 63976 and two 1255D

......................................

Stop Cara Interlocking Rod Case 124904

with 1318D,17855,17863,17864,39222

and 68739..................................................................

Stop Cara Interlocking Rod Case Bracket.. Stop Cam Interlocking Rod Case Bracket

complete. Nos. 1182E, 1196C, 1204E,

1254C,1262C,1508J,1662C,17853,17859, 17861, 17862, 17872, 17873, 124771, 124772 and two 898D

..............................................

Stop Cara Interlocking Rod Case Bracket

Dowel Pin..;

..............................................................

Stop Cara Interlocking Rod Case Bracket

Screw

..............

..........................................................

Stop Cam Interlocking Rod Case Hinge

Sc lew........................................................................

Stop Cam Interlocking Rod Case Socket

Joint...........................................................................

................

No.

89 8D

11622

19694

Plate

23153

9596 9596

1695C 9596

17861

12.54C

23153

231.53

1508J 231.53

17862

124774

23153

17863 23153 17864 23153

1318D

23153

68739 231.53

3012 23178 1206C

23178

2102 23190

156 OC

1274C

23190

23190 62506 13710 23190

124840 23190

5037QI

23190

124850 23186

62124 23178

124933 9596 124934 9596 124935 9596

1186D 9596

1722D 9596

1722D

12Л938

5112(U

9596 9596 9596

51591J 9.596

50152D 9596

124936

62126 9596

PARTS FOR MACHINE No. ll/(-32

Name

Stop Cam Interlocking Rod Сазе Socket

Joint Cap Screw.......................................................

Stop Cam Interlocking Rod Case Spring...

U II U II II II

Hook.........................................................................

Stop Cam Interlocking Rod Case Spring

Hook Lock Nut

........................................................

Stop Cam Interlocking Rod Case Stop Stud

Screw Bushing.........................................................

Stop Cam Interlocking Rod Case Stop Stud

Screw Bushing Lock Nut

........................................

Stop Cam Interlocking Rod Case Stop Stud

Spring.......................................................................

Stop Cara Interlocking Rod Case Wearing

Block........................................................................

Stop Cam Interlocking Rod Spring

” " “ * Stop

..................................

............................

" " " 11« Screw....

« " " " « Wash

Stop Cam Pin

" " Screw

....................................................................

...............................................................

Tension Disc.....................................................................

" Regulating Thumb Nut “ Screw Stud

...........................................

.......................................................

" " " 1274C with 1560C

" Spring...............................................................

" Thread Guide

“ • « ggj. ggj.gy

Thread Breaker

..........................................................

..................................................

.................................................................

" " Bar with 62130 and two

3021

Thread Breaker Bar Check

.........................................................................

...............................................

" " " " Plunger...........................

It n II h U ЛЛ _

H « «НК II

Screw........................................................................

Thread Breaker Bar Check Plunger Lock

Nut............................................................................

Tliread Breaker Bar Check Plunger Nut....

" II « « « Spring. " " “ “ Regulating Screw

« II H к и n

Lock Nut..................................................................

Thread Breaker Bar Check Screw

......................

Tliread Breaker Bar Check complete. Nos,

51120J, 5159U, 124933 to 124935, 124938 and two 1722D

...........................................

Thread Breaker Bar Connection with 17917

................

. Case...

PARTS FOR MACHINE No. 114-32

No. Plate Name

17915 9596 Thread Breaker Bar Connection Slide

Block

2^7917

_____

Thread Breaker Bar Connection Slide

.........................................................................

Block 17915 with 17916

17916

9596

Thread Breaker Bar Connection Slide

Block Stud.................................................................

59734

9596

Thread Breaker Bar Driving Lever with

223F and 597i35........................................................

1382F

9596

Thread Breaker Bar Driving Lever Hinge

Screw.........................................................................

1681C

59735

9596

Thread Breaker Bar Driving l^ver Hinge

Screw Nut..................................................................

Thread Breaker Bar Driving Lever Lock

Stud............................................................................

223F

124787

1235F

124908

62129

50018F

1547J 59739 62130

3021

59739

'' 236F 124609 124607 124608

1477F

124610

457C

124611

124614

9596

23186 23186 23186 23186 23186 23186 23186

23178

23186 23186 23188 23188 23188 23166 23188

23188

23190

Thread Breaker Bar Driving Lever Lock

Stud Screw.................................................................

Thread Breaker Bar Guide

« “ 0 « Screw

.................................................

" " Holder with 59739

« • " Cap with 59739

“ “ «II Screw « « « « « Nut

" >' " " stud " " “ Connection " “ " " Rivet..

“ " ' Stud....................................

" " Screw

“ Controller Sleeve

.......................................................

.....................................................

“ " Spring..................................................

• " “ Collar with 1477F

" " n « ggt Screw.

" " Stud........................................

• « « 3gt Screw

Thread Controller complete. Nos. 124607

to 124610

..................................................................

Thread Nipper (lower) Blade Carrier with

124619 and two 6037................................................

665J

23190

Thread Nipper (lower) Blade Carrier Cap

Screw.........................................................................

124615

23186

Thread Nipper (lower) Blade Carrier

Hinge Stud.................................................................

6037

124939

335J 124653 124618

99K

23190

23182

23190

23190 23190

Thread Nipper (lower) Blade Rivet....................................

" " ' Cam...........................................

" « » « Screw “ " “ Connection

" " " " Extension II « « • ■

Hinge Screw

..............................................................

206J 23190 Thread Nipper (lower) Connection Exten

sion Screw.................................................................

...........................................

.............................

...................................

________

.................................

...........

............................

........................

............................

.........................

.......................

No.

124619

124620

85.54 124621 124930

335J

8554

237K

12-1623

12^1957

51188J

17738

1743D

59773

_ 23I90--

^ 44X

59774

_J2l7a

'“50150C

2921 12162 62169

59775

1527D 23190 59776 13538 23190 13539 13540

2026

59777

_59778

124843

202J

7071 23190

124625

42803

62171

337J

62172

124626

69 IF 23188

7335

32576

453C

PARTS FOR MACHINE No. IU-32

Plate 23190

Thread

Nipper

Stud.

23190 23190 23190 " 23182 23182 23190 23190

23190

Thread

«1

Nipper

23190

Screw

23190

Thread Nipper

Bracket Screw Washer.............................................

23190

Thread

Nipper

Nut..

—itxEaad NlDPer (uDoer)

23190

23178 23190 23190 23190 23190

23190

23190 23190 23190

Thread Nipper

23190

Thread Nipper

1527D,

62169 23190 23190

23188 23188 23188 23188 23188

Thread

Pull-off (double)........................................................................................

Take-up Body with 62172.............................

Take-up

42808,

Thread

Take-up Screw. 23190 23190 23190

Name

(lower'

(lower) ** «

« II

Connection Hinge

Driving Arm

n «

Lever with 237K. ..

“

...................

“ Guide

......................

“ “ Screw.

" Pin

...........................

" Set Screw...

" Shaft

........................

" " Bracket M N N

" “ Pin...

(lower) Lever Shaft

(upper)

----n----

ft M

•'

(upper)

Adjusting Thumb

Body................................

__y

....................................

Cam with two 50150C

Set Screw

Disc

...................................

“ Guide Pin " Spring

Eyelet

..........................

................................

Loc^ Nut...........................

Stud with 13538________

“ Position Pin..

" Roller

...........................

" " Pin

______________

" Spring

..........................

Stud complete,Nos.

Set Screw....

.................

....................

13540 ariir-S5776....................................

(upper) complete. Nos.

1743D,2026,

and

H H

59773,59775,59777,

two 2921.................................................................................

Screw

Washer

............................

Roller

Cap

...........................................................

“ Screw

.........................

Pin.................................................................

complete, Nos, 337J,

124625

62171 and

Spring

..............................

Regulator

........................

" Set Screw

PARTS FOR MACHINE No. 114-32 IV

No.

12464-4

50370J

Plate Narae 23190 Thread Take-up Spring Thread Guide

.........................................

23190 " " " " " Set

Screw.........................................................................

39452 39453

33 OJ

1207D

124777

136556

39455 39456

1302D 136547 124981

136555

23188 Thread Wiper Body......................................................................

23188 “ " " Finger

.............................................

23188 “ « « « Screw..............................

23188 " " " Hinge Screw

23188 " « « Support...........................................

..........

“ " “ " 124777 with

1207D, 1302D, 39452, 39455 and 39456

641C

23188 Thread Wiper Body Support Set Screw 23188 " " " Wire

.......................................

..............................................

23188 « • « « Clamp 23188 « . « « • Screw

23186 Throat Plate with 124615

.............................................................

23186 " " Needle Guard..............................................

23186 « » It « screw............................

206J

23186 Throat Plate complete, Nos, 665J, 1547J,

50018F, 62129,124a50,124907,124908,

.................................

..............................

.....................

124981, 136547 and two each 206J and

236F..........................................................................

23186 Throat Plate Screw.......................................................................

691F

17872

1196C

17873

1182E

17874

•15404 15405

23153 Trip Lever.....................................................................................

23153 " “ Hinge Screw....................................................

23153 " * Spring................................................................

23153 « " » Screw..............................................

23182 Tripping Point...............................................................................

23182 " " Screw

190J

--------

Trade Mark.............................................................................

..........

" " Rivet...................................................................

.....................................................

LIST OF PARTS COMPLETE

FOR

MACHINE No. 114-33

For Sewing Two or Four Hole Flat Buttons, from 10 to 50 ligne. Makes two parallel bars in four hole buttons, 14 stitches, including cross and fastening stitches. Thread cutter. Clamp vibrates UP the cylinder. Will hold button and material up to yi6 inch thick and can be adjusted for buttons with holes %4 Inch to Yiq inch apart. Speed 1500 R. P. M.

No.

•124845 *124825

16532 23179

444-8

56015 23179

59702

•136541

17703 23179

50333C

1520J 23179

59703 23179

103 ec 59704 23179 59705 23179

446C 23179

59706 23179

446C

59707

1253C 23179

59708

880E

Plate

—

..........

23179

23179 23179

23179

Arm.

" 124845 with 15404, 124839 and two

each 164E and 15405...............................................

Arm Dowel Pin..................................................................

Name

" Oil Tube, for Intermediate bearing..

" " " " oiling 59705 and 59706

'' Screw............................................................................

" Shaft (horizontal).........................................................

" " " 59702 with 59774,

62235 and 68717......................................................

Arm Shaft (horizontal) Bushing (back)...

" " “ * "Ad

justing Screw

Arm Shaft (horizontal) Bushing (back)

Adjusting Screw Nut................................................

Arm Shaft (horizontal) Gear with two

1036C ......................................................................

Arm Shaft (horizontal) Gear Set Screw...

" “ (upright) " " “ Bushing (lower) " • “ “ " Set

Screw........................................................................

Arm Shaft (upright) Bushing (upper)

" " “ " “Set

Screw........................................................................

Arm Shaft (upright) Gear (lower) with

two 12.53C...............................................................

Arm Shaft (upright) Gear (lower) Set

Screw........................................................................

Arm Shaft (upright) Gear (upper) with

two 12f>3C..............................................................

...........................................................

.............................

...............................

No.

1253C

124674

190J 18498 59795

184E

59796

217J 39222 63976

1255D 124712 124713 124714 124715

124716

50435J

124717 124718

1253C

51224W 124719 124720

1403D 124902 124901

124903

7920

176J

50446D

56493

124846

39238

39239

124732

17710

1176J

124780

1175E

124906

190J

124711

1057J 23190

PARTS FOR MACHINE No. 114-33

Plate

23179

23179 23179 23179 23179 23179 23179 23179 23153

23153 23153

9596

9596 9596 9596

9596

9596 9596 9596

23153

23153 23153 23153

9596 9596

9596 23168 23168 23168 23168 23168 23168 23168

23188 23188 23190

Arm Shaft (upright) Gear (upper) Set

Screw

Arm Side Cover

" * “ Screw.....................................................

Belt Cover..........................................................................

Brake

—

Brake Adjusting Plate Handle Hinge Screw

Brake Adjusting Plate Handle Shaft Crank

Brake Adjusting Plate Thumb Screw

9596

Brake Arm Releasing Lever Bracket

Button Clamp (left) with 9311 and 17723.

Button Clamp Locking Device latch Clamp

........................................................................

" “ Bracket with 184E and 59796..

" " • Screw Stud........................................

* " * Stud...................................................

" " Screw

" Shifter.........................................................................

" “ Clamp...........................................................

" “ “ Screw

..................................................................................

" 124712 With four 56493......................................

“ Adjusting Plate

“ " * Handle...................................

“ " ti « 124715 with

124717

......................................................................

" « « . ............................................................................

" .... Crank

with lasac...................................................................

Set Screw

" .... Basiling

" Arm

...........................................................................

" " Hinge Screw....................................................

" " Releasing Lever " “ “ " 124902 with

124908 and two 792C

" “ " « . Screw. " " * “ Screw " Hinge Screw

" Pad (leather)

“ Spring.........................................................................

" “ (right) with 9311 and 17723 “ * Arm with 17714 and 124780..

* ' * Hinge Plate.....................................

" » « II » Screw

" " * Hook...............................................

" “ Hinge Screw...............................................

“ ' Lifter......................................................

" " " Screw * ’ Locking Device Latch with

two 1057J..................................................................

ing Screw..................................................................

Name

.................................................................

.........................................................

...........................................

...........................................................

..................................................................

...............................

..............................................

.................................

...........................

...............................................................

....................

............................................

No.

124678

124679

124680

1282C

124823 23190

124733 124734

1182J 124735 1&1736 23188

50117J 23188

1484J 23188

17718 23188

39241 23168

17713

1177D 23168

17714 23168

1178D 23168 20437 39242 23168

124'737 23168 124738 23168

1182J

17718

124739 23168

50237F

1182J

17718 23168

1182J

17719 23168

1181J 23168

17720 23168 39244 39245

Plate 23190

23190

23168 23168 23168

23188

99R

23168

23168 " " " » « Position

23168

23168 2316H

PARTS FOR MACHINE No. 114-33

Button Clamp Locking Device Latch Shaft.

a 0 a a a a

Crank........................................................................

Button Clamp Locking Device latch Shaft

Crank Connection.....................................................

Button Clamp Locking Device latch Shaft

Crank Connection Hinge Screw (lower)

Button Clamp Locking Device Latch Shaft

Crank Connection Hinge Screw (upper)

Button Clamp Locking Device Latch Shaft

Crank Pin..................................................................

Button Clamp Opening Lever...........................................

" " " " Bracket “ “ " * " Screw " “ " " Contact Piece

OH N M MM

Arm...........................................................................

Button Clamp Opening Lever Contact Piece

Arm Screw

Button Clamp Opening Lever Contact Piece

Screw........................................................................

Button Clamp Opening Lever Contact Piece

Screw Washer

Button Clamp Opening Lever Hinge Screw..

" " Pressure Spring " " " " Bracket

“ " " • . Screw “ " " " Guide Block

" " " " Screw...............................................................

" " “ " " Washer

“ * Spreader...............................................................

“ * " Lever " " “ ' Adjusting

Plate

Button Clamp Spreader Lever Adjusting

Button ClaJnp Spreader Lever Stop

Button Clamp Spreader Lever Stop Screw..

Button Clamp Spreader Screw

.........................................................................

Plate Screw

Plate Screw Washer.................................................

Screw

.......................................................................

OH H N If H

Washer

....................

“ * * Spring................................................................

" " " " Screw Stud.

" " " Steady Pin..........................................................

“ " Spring (left)..........................................................

" “ " (right).................................................................

Name

............................................................

..............................................................

..........................................................

....................................................

_____________________________

.................................................................

.............................................................

.................................

...............................................

.........................................

No.

226J

931 i

39248

1183J

17723

124740

62102

742F

154 7J

62103

3021

62104 26770 62182

•124741 62189

124742 124743

62185 62111

1477D

124744

1477D

62113

1034D

124745

59711

59712

2107

9543

9544

9545

63940

63941

55301

190J

236D

1640

229D

208D

PARTS FOR MACHINE No. llA-33

Plate 23168 23168 23168 23168 23168

23183

23183 23183 23183

23183 23183 23183 23183 23183

23183 23183

23183

23183 23183 23183 23183 23183

23183 23183 23179 23179

23180 23188

23188 23188 23188 23186

23188 23188 23188 23189

23189

Button Clamp Spring Screw

' " * Steady Pin

" “ Stop with two 17720..................................

" “ " Screw............................................

" " Stud.........................................................

Button Clamp complete. Nos. 99R, 1181J,

11830,17719,39238,39239,39242,39244, 39245,39248,50237F,124732 to 124734, 124737 to 124739, two each 2260,

1175E, 17718 and five 11820

Cloth Plate Guide Block (left)............................................

" " “ “ " Screw..,, " • " " “ “ Nut

" " * " (right)

* * Screw

" * Stop “ “ " Rivet

Cloth Plate complete. Nos. 742F, 15470,

26770, 62102 to 62104 and two 3021..

Cylinder with 124719.........................................................

" Bottom Cover...........................................................

“ End Cover,

“ " " 124742 with 1034D,

62111,62113,62185,62189,124744 and

four 1477D

Cylinder End Cover Bracket

“ » » « Hinge Pin

■ « « . gQpevi

” - “ “ Hinge............................................

” . • «

“ " " Spring

“ « « ■> Screw..................

" Oil Well Cover.........................................................

■ “ " “ Screw

Face Plate Face Plate complete. Nos.2080,9544,9545,

...........................................................................

59711 and two each 229D, 2107 and

9543............i.............................................................

Face Plate Screw................................................................

" " Thread Guard..................................................

" * " “ Screw

“ “ “ Nipper Disc " * ■" . . Cover

ana a a a gcj-ew

' “ * a a Sprjng....

Feed Across Connection (lever end) with

two 896E...................................................................

Feed Across Connection (lever end) 63940

with 55381.................................................................

Feed Across Connection (lever end) Ball

Stud

...........................................................................

Name

..............................................

....................................

..................................

...........................

Rivet.,,

.......................................................

..........................................................

...............................................

...............................................................

............

...................................................

..............................................

_____

.................

.............

......................................

................................

...............................

.............

PARTS FOR MACHINE No. liA-33

PARTS FOR MACHINE No. 114-33

No.

llSIoC

Plate 23189

63942 23189

63943

896E

23189

23189 23189

23189

23189 23189

63944

62115

1649C

165CC

59713 59714

59715 23189

59716 23189

.59717

999D

59718

193D

23 8D

2273

23189

59719 23189

59720 23189

2273

51814

59721 50150C

59722

293189

23189

23189 23169

23189

59800

2022 23189

59723

23169

Peed Across Connection (lever end) Ball

Name

Stud Set Screw.........................................................

Feed Across Connection (regulator end)

with two 896E..........................................................

Feed Across Connection (regulator end)

63942 with 63944....................................................

Feed Across Connection (regulator end)

Ball Stud

..................................................................

Feed Across Connection Ad;)ustlng Stud...

" “ " " “ Nut

(left).........................................................................

Feed Across Connection Adjusting Stud

Nut (right)

Feed across Connection Cap Screw

................................................................

.................................

" " Lever with 1185C and 50150C.

Feed Across Lever complete, Nos. 59713,

69715 and 59721

.....................................................

Feed Across Lever Extension with 1952

and 51814.................................................................