How it Works
SINGER
Loading...
114-3
User Manual
29 pgs1.04 Mb0
Table of contents
Loading...

SINGER 114-3 User Manual

Form 8654 (520)
Printed in U.S.A.

LIST

OF

PARTS

SINGER

MACHINES

THE SINGER MANUFACTURING COMPANY

**A Trade Mark of THE SINGER MANUfACTURING COMPANY
INSTRUCTIONS FOR OILING
To ensure easy running and prevent unnecessary wear of the parts which are in movable contact, the machine requires oiling and when in continuous use, "TYPE B" or "TYPE D" OIL, sold by Singer Sewing Machine Company, should be
applied at least twice each day to all oil holes marked "OIL".
"TYPE D” OIL should be used when an oil is desired which will produce a minimum of stain on fabrics, even after a long period of storage.
INDEX
PAGE
Acf'EHSORIES....................................................................................... 18
Machine No. 114-3................................................................................................ 7
“ “ 114-4....................................................................................... 18
Numerical List of Parts..................................................................................... 23
Or.solete Parts.................................................................................................... 21
Protector............................................................................................................. 19
Starting Pever and Toot Lifter Parts
Taule Belt Guide.................................................................................................. 20
Thread Unwinder.................................................................................................. 20
.......................................................
20
Copyright, U. S. A., 1917 and 1920,
by The Singer Manufacturing Company
Ail Rights Reserved for all Countries
SINGER Needles should be used
in SINGER Machines
These Needles and their Containers
are marked with the
Company s i raae marx
"FOR SIN6ER MACHINES”
are NOT SINGER made needles. 2

INSTRUCTIONS FOR ORDERING

In ordering from this list, use ONLY the part NUMBER
in the FIRST column.
The number stamped on a Sewing Machine part ie in every
case the number of the single part only.
Every combination of parts sent out aa such has its spécifié number, which, although not stamped on the parts, must be used when ordering the combination.
Each number always indicates the SAME PART in whatever list it appears, or for whatever machine.
The letters after some of the numbers indicate the style of finish only, as follows;
A.
Hardened, Polished and Plated.
B.
Polished and Plated
C.
Hardened only.
D.
Polished only.
E.
Soft, not Polished.
F.
Hardened and Polished.
G.
me 13!,,^.!
J. Plated only. K. Hardened and Plated. L. Brass or Gilt. M. Oxidized.
P. .lananned.
R. ParkerizBu.
These letters MUST BE USED u)h»n they appear in the list,
and AFTER the number os in the list.
In this series
1 to 1500 and 60001 to 61500 are Screw Numbers. 1501 to 1800 are Nut Numbers. 1801 to 2000 are Roller Numbers. 2001 to 50000 and 62001 and upward are numbers of
Machine Parts.
The figures in the second column refer only to the plates,
illustrating the parts, and are NOT TO BE USED in ordering.
Parts marked with an asterisk (*) are furnished only when
repairs are made at factory.
LIST OF PARTS COMPLETE
FOR
MACHINE No. 114-3
FOR SEWING TWO OR FOUR-HOLE BUTTONS ON SHIRTS, WAISTS
AND UNDERWEAR. SMALL BUTTONS ONLY. MAKES TWO PARALLEL BARS IN FOUR-HOLE BUTTONS. MAKES FOURTEEN STITCHES INCLUDING THE FASTENING STITCHES.
NO. PLATE
16532
4448
56015
880e
—
6976 6976 6976 6998
*59701
59702 6975
17703
6981
50333c 6998
Arm with 4449, 59767 and two 164e
“ Dowel Pin......................................................
“ Oil 'Tube, for intermediate bearing. . “ “ “ “ oiling 59705 and 59706.
“ Screw.............................................................
“ Shaft (horizontal) “ “ “ Bu.shing (back). ..
“ “ “ “ “ Ad
justing Screw
NAME
.....................
..........................................
Machine No, 114-3
*4449 59703 6976
59704
6976
59705 6976
435c
7015
59706
59707
59708
448c
1253c
1253c
6976 6992
6976
6976
6976
6976
18498 6975 Belt Cover
59795 6977
184e 6998
59796 6988
Adjusting Screw Nut
......................................
Arm Shaft (horizontal) Bushing (front) . .
“ “ “ Gear with two
1036c
..............................................................
(upright).
Bushing (lower)....
“ Set
Screw.
Screw
.........
rm Shaft (
two 1253c.
rm Shaft (
Screw
.........
rm Shaft (i
two 1253c,
Screw.. .
Bracket with 184e and 59796.
“ Screw Stud
...........................
“ Stud......................................
Set
8 PARTS FOR MACHINE NO. 114-3
NO. l'I..\TK NAME
217d G'.)98 B<'U, Cover Screw.............................................
39222 (5977 “ Shifter............................................................
39223 C976 “ “ Clamp
1255d 6976 “ “ “ Screw 39238 3747 Riilton Clamp (left) with 9311 and 17723 39239 3747 “ “ (right) with 9311 and
17723..............................................................
39240 3747 Hutton Clamp Arm with 17714 and 63788
17710 6978 “ “ “ Hinge Plate.........................
1176d 6978 “ “ “ “ “ Screw...
63788 7015 1175e 6978
59710 6<i79
176u 7009
39241 6978
17713 6978 “ “ “ “ Bracket
11771) 6978
Screw..............................................................
17714 6978 Button Clamp Pressure Spring Guide
Block. , .
Il78i) 6978 Button Clamp Pressure Spring Screw.. . .
17717 6979 “ “ “ Lever.............................
50237f 6979 “ “ “ “ Hinge
Screw..............................................................
1180n 6979 Button Clamp Spreader Lever Locking
17718 6979 Button Clamp Spreader Lever Locking
'rhumb Screw Washer
1182k 6978 Button Clamp Spreader Screw
39243 6978 “ “ “ Spring
207f 6978 “ “ “ “ Screw
7071 6990 “ “ “ “
Washer............................................................
17720 6979 Button ('lamp Spreader Steady Pin
39244 3747 “ “ Spring (left) for flat
buttons
39245 3747 Button Clump S]iring (right) for flat
buttons
39246 6978 Button Clamp Spring (left) for stud back
buttons
39247 6978 Button Clam]) Spring (right) for stud back
buttons............................................................
229n 6978 Button Clam]) S])ring Screw
9311 3747 “ “ “ Steady Pin
39248 6979 “ “ Stop with two 17720
1183d 6979 “ “ “ Screw................................
................................................
...................................
“ Hook
................
Hinge Screw . . . .
Lifter
.....................
“ Screw...
Pressure Spring.
........................................................
.....................................
.................................
.....................
.........................
............................................................
............................................................
............................................................
...................................
.......................
....................
NO. PLATE
17723 6979
39249 3751
*62180
*62181
62102
6980 6980
742f
1547n
6980
62103
6980
3021
6980
190d
6990
62104
6980
26770
6980
62182
6975
*62177 ---------
62183 7014
0.^100 DUOl 62184
------
62185 6980
14771)
6980
62112
6980
1477d
6980
02113
6980
1034i)
6980
62114
6980
286d
6980
59711
6981
59712
164i) 6990
2107 6980
229i) 6978
9543 6980
9544 6980
208d 6980
9545 6980
PARTS FOR MACHINE NO. 114 3
NAME Button Clam]) Stud Button Clam]) (univer.sul) complete, for
10 to 50 line thin buttons, Nos. 207f,
1180d, 1182e, 7071, 17717, 17718, 39238 to 39240, 39242, 39243, 39244 or 39246, 39245 or 39247, 39248, 50237f and two
each 229i), 1175io and 1183d.........................
Cloth Plate with 62181........................................
Cloth Plate complete. Nos. 742p, 1547d,
26770, 62102 to 62104, 62180 and two
3021.................................................................
Cylinder...............................................................
“ Rottoni Cover
“ “ “ 62108 with 1034D,
62111 to 62113, 62183, 62185 and four
1477d..............................................................
Cvlinder End Cover Bracket
“ Top Cover “ “ “ Thumbscrew
Face Plate
Face Plate complete, Nos. 208d, 9544,
9545, 59711 and two each 229d, 2107
and 9543..........................................................
Face Plate Screw
“ “ Thread Guard “ “ “ “ Screw “ “ “ Nipper Disc “ “ “ “ “Cover
Screw
..............................................................
Face Plate Thread Nipper Disc Spring. ..
.............................................
Button Tray...................................
Guide Block (left)
.........................
“ “ “ Screw....
“ “ “ “ Nut “ “ (right)
....................
“ “ “ Rivet...
Screw
............................................
Stop
...............................................
“ Rivet
.......................................
I’.rui v^over......................................
...............................
(( U
ii U
‘ Screw
“ Hinge
................................
“ “ Screw “ S])ring
..............................
“ Screw
...................
...................
...................
.................................................
.....................
............................................................
.................................................
.....................
..................
............
10 PARTS FOR MACHINE NO. 114 3
NO. I'l.ATi; NAMK
0211.') 00S2 J''c(‘(l .\(To.sa Coiiii('ctii)n Adjii.sting Stud 10 life 00S2 “ “ “ “ “
02110 0982 Feed Aeross Knuckle Joint
17728 0982 “ “ “ “ Connection
1181k 0982 “ “ “ “
.'i97 13 098 I Feed Across Lever with 1185c and 50150c
17730 0'.)82 “ “ “ Ball Stud................................
1185c 0982 “ “ “ “ “ Set Screw...
59711
---------
59715 6983 Feed Across Lever Extension with 1952
59710 6983 Feed Across Lever Extension Disengaging
50717 6983 F’eeil Aeross T.ever Fixtension Disengaging
59718 6983 Fceil Across Lever Fixtension Disengaging
Nut (left).......................................................
0982 Feed Aeron.s Connection Adjusting Stud
Nut (right).......................................................
.....................................
Hinge Screw
J‘'eed Across Lover complete, Nos. 59713,
59715 and 59721
and 51814
Ficcentric
Ficcentric Connection.....................................
999n 0983 Feed Across Lever Fixtension Disengaging
I'iccentric Connection Spring
193i) 6983 Feed .4cross Lever Fixtension Flisengaging
...................................................
...........................................
.......................................................
........................................................
.........................
Ficcentric Connection Spring Screw....
PARTS FOR MACHINE NO. 114-3
NO. PLATE NAME
1404d 6983 F’eed Across Lever Fixtension Position Arm
9525 6983 F’eed Across Lever Extension Position Arm
1952 6983 F’eed Across F.ever Fixtension Roller and
430c 6994 F’eed .Across Lever Extension Stop Screw
1520e 6994
59724 6987 F’eed Across Lever Hinge StUd
160d 6998 “ “ “ “ “ Clamping
62118 6985 F’eed Across Lever Plate with 17741 62119 6985 “ “ “ “ Cover
1094f 6985 “ “ “ “ Screw 55300 6985 “ “ “ “ Steady Pin 17733 6982 “ “ “ Socket Bearing 17734 6982 “ “ “ “ “ Block
145f 0982 F’eed .Across l/cver Socket Bearing Block
62120 6984 F’eed .Across Regulator..........................................
1187e 6982 “ “ “ Adjusting Screw
Support )Screw
Support Screw Washer
Stud.................................................................
Nut..................................................................
Screw
..............................................................
(two pieces)
Set Screw
Set Screw Nut
Stud
.................................................................
...............................................
...................................
................
.....................
..........
..........
..........
.....................
..................................................
........................................................
.................................................
11
..
Ficcentric Connection Stop Screw
2273 6983 F’ei'd Across Lever Fixtension Disengaging
Ficcentric Pin..................................................
59719 0)983 F’eed Aeross Lever Fixtension Flisengaging
59720 6983 Feed Across Lever Extension Disengaging
2273 6983 F'eed Across Lever Extension Disengaging
51814 6983 FAed Across I.cvcr Fixtension Guiding
59721 6983 Feed Across Lover I'ixtension Hinge Pin 50150c 6991
62195 7014 F’eed Across Lever Extension Position Arm
2022 6983
59723 6983 F'eed Across Lever Extension Position Arm
Eccentric Shaft................................................
Handle
............................................................
Handle Pin
Roller and Screw Stud
Set >Screw......................................................
Pin...................................................................
iSupport
......................................................
....................................
..........................................................
.................
Stud Nut
..........................................................
17738 6982 Feed Across Regulator Adjusting Screw
Stud Nut Washer.............................................
17739 6982 F’eed Across Regulator Adjusting Screw
1188d 6998 Feed Across Regulator Hinge Screw........................
62121 6985 “ “ “ Link
50324k 6985 “ “ “ “ Screw Stud
1655k 6985 “ “ “ “
14017 6985 Feed Across Regidator Link Screw Stud
17741 6985 F’eed Across Regulator Idnk Stud..............................
62196 7013 “ Cam with two 1192c and three each
1442c 6987 F’eed Cam Driving Worm Position Screw.
1441c 6987 “ “ “ “ Set Screw..................
Stud Sleeve
Nut
Nut Washer.....................................................
18415 6987 F’eed Cam Driving Worm with 1441c and
1442c
.....................................................
........................
..................................................................
190d, 208d, 227d, 17874 and 62138.. ..
..............................................................
12
NO. PLATE
17797
3012
453c
18384
1192c
59728
1653c
59729
17923
»18445
62123
59730 50306U 6987
18368
934d
16,54c
17806
1195e
PARTS FOR MACHINE NO. 114-3
NAME
(Jam Driving Worm Wheel with
Feed
6977
6988 6987
6988 6987 6989 6999 6988
6988 6989
—
6987
6987 6987
6988 6988 6988
453c................................................................
Cam Driving Worm Wheel Pin....
Feed
U
“ “ “ “ Set Screw
u
“ Pin.......................................................
и
“ Set Screw
((
“ Shaft....................................................
и
“ “ Nut
и
Plate (thick)
и
“ (thin)
и
“ Carrier Bar
и
“ “ “ 1844.5 with 934d,
............................................
...................................................
..............................................
..................................................
.........................................
1094P, 1195E, 17743, 18368, 62118,
62119, two 55300 and four 17806..................
Feed Plate Carrier Bar Pivot Block
“ “ “ “ “ Screw
“
“ “ “ Plate..............................................
4
“ “ “ “ Screw.....
и
“ Nut
“
.....................................................
“ Po.sition Stud
“ Screw Stud
.....................................
.........................................
....................
PLATE
NO.
—
17917
6990
17916
6990
59734
13,S2f 6998 1681c 6999
6990
59735
6990
223 F
6990
62127
6990
1235P
7015
8734 62192 7015 62128 6990 62129 6990
69 If 6990 59739 6990 62130 6990
3021 6980
59739 6990
PARTS FOR MACHINE NO. 114-3
NAME
Knife Bar Connection Slide Block 17915
with 17916
Knife Bar Connection Slide Block Stud..
“ “ Driving Lever with 223f and 59735
Knife Bar Driving Lever Hinge Screw
Nut
Knife Bar Driving Lever Lock Stud
.....................................................
..............................................................
<< i( (i i(
..................................................................
“ Guide
.........................................
“ “ Screw
“ Retaining Spring
................................
........................
“ “ “ Bracket.
Holder with 59739
..........................
“ Cap with 59739.......................
“ “ Screw
“ “ Stud
.........................
............................
“ Connection..............................
“ “ Rivet
.....................
“ Stud ........................................
13
...................
Screw
62117
»17732
160d 6998
1177d
17744 17743
1953
1655c
14017
1190c
17745
1191d 6987
59731 62124 62125
62126
17915
6984
__
6978 6987 6987 6988
6985
6985
6987 6987
6990 6975 6990
164d 6990
6990
190d 6990
6990
«
“ Bracket with 17732 and
three 160d.......................................................
Feed Regulator Bracket (Jap...............................
“ “ “ Screw
t<
i(
“ “ Screw............................................
a
“ Hinge Stud.....................................
“ Post
tt
“ Roller and Screw Stud
.......................................
v:..
................................................
with 1655c and 14017.....................................
Feed Regulator Roller and Screw Stud
Nut..................................................................
Feed Regulator Roller and Screw Stud
Nut Washer.....................................................
Feed Regulator Stop Screw
“ Swivel............................................
U
“ Thumb Screw
Knife...................................................................
(<
Bar with 62130 and two 3021
a
“ Cap.....................................................
a
“ “ Screw
a
“ Connection with 17917
a
“ “ Screw................................................
a
“ “ Slide Block.......................................
................................
.................................
.................
...............................................
......................
62179 7015
*59742
—
59743 6991
62131 0991
^9.(Ur^
1148c 7015
59745 6991
46,5c 6991
59746 6991
.501.50c 6991
59707 6976
59747 6992
190d 6990
1253c 6976
59748 6991
501,50c
59749 59745
6991 6989 6991
465c 6991
59746
6991
Looper with 34418..............................................
“ Collar
..........................................................
“ Driving Shaft “ “ “ Bushing
..............................................
.....................
PuflfinOT
(coitori)...........................................................
Looper Driving Shaft Bushing Set Screw.
“ “ “ Collar with two
46,5c................................................................
Looper Driving Shaft Collar Set Screw.. .
“ “ “ Coupling with two
50150c.............................................................
Looper Driving Shaft Coupling Set Screw
“ “ “ Gear with two
125.3c
...........................................................
Looper Driving Shaft Gear Cover
....................
“ “ “ “ Screw “ “ “ Set Screw... “ “ Universal Joint...
Set Screw............................................
Shaft with 50150c and 59742. . .
“ Collar with two 465c
“ “ Set Screw
....................
......................
“ Couphng with two 60150c..
14 PARTS FOR MACHINE NO. 114-3
NO. I'L.iTB N.\ME
6()150c 0991 Loopcr Shaft C^oiipling Set Screw 62197 7015 “ “ Rail with two 624c
62132 f)991 “ “ “ Connection with 59752
and two 171e...................................................
*59752
--------
Looper Shaft Ball Connection Cap.........................
171E 0991 “ “ “ “ “ Screw.
62133 6991 “ “ “ “ Stud (ec
centric) ...........................................................
1095k 6991 I.i)oper Shaft Ball Connection Stud Cap
Screw..............................................................
1259c 6991 Looper Shaft Ball Connection Stud Set
Screw
..............................................................
624c 6991 Looper Shaft Ball Set Screw
62134 6991 “ Slide Block................................
62135 6991 “ “ “ “ (dip......................
llSOc 6991 “ “ “ “ “ Screw. . . .
3441S 6991 “ Washer
621!)S 7014 Needle Bar with 1072k
................................................
..........................................
39203 6'.I92 “ “ t'onnecling Link
377c (>992 “ “ “ “ Hinge Screw
ipiu.,; ¡■¡poo “ “ “ “ “ “
INUt
.....................................................................
2052 6992 Needl(! Bar Connecting Stud with 155c. .
155c 6992 “ “ “ “ Set Screw...
59757 69!)2 “ “ Crank Wheel with 448c and
1293c..............................................................
i29o(; in)i)2 iNeoillt' j)<ii (.’liuik Wiiccl i’ositiori ocrew.
448c 6i)92 “ “ “ “ Set Screw..........
.59758 6993 “ Guard
.............................................
59759 6993 “ “ Cam with two 465c
465c 6991 Needle Bar Cam Set Screw
2273 6983 “ “ Pin............................................
59760 t)989 “ “ Shaft 59761 69!)3 “ “ “ Collar with two 465c
465c 6991 “ “ “ “ Set Screw....
59762 69i)3 “ “ “ Crank with 51812
and two 465c...................................................
5i8l2 6993 Needle Guard Shaft Crank Roller and
Stud.................................................................
465c 6991 Needle Guard Shaft Crank Set Screw.. . .
59763 6993 “ “ “ End Bearing 59764 6989 “ “ “ “ “ Bracket
2022 6983 “ “ “ “ “
Dowel Pin
.......................................................
965n 6993 Needle Guard Shaft End Bearing Bracket
Screw..............................................................
.........................
....................
....................................
............
.......................
......................................
.........................................
.........
PARTS FOR MACHINE NO. 114-3 15
NO. PLATE
1480H Gsm
Needle
¡screw..............................................................
59765 6993 59766 6993
Needle Guard Shaft Spring
<4
624c
624 c6991
Needle Guard Shaft Spring Collar Set
Screw
233u 6995
1072f 6993
2058 6989
17841
196f
17842 6992
453c 6987 17843 59767 6996 “ “ “ Bracket
104e 6990
1201 n 17845 6984 17846
8414
17848 6977
2269
1202n 17942
OAOO CAOD
17955
---------
Needle Guard Shaft Spring Screw. :
Pre.sser Bar 6992 6992
U
U
U
6981
u
6996
a
44 — 6989
(4 6994
6998 6977
u
44
(4 44
17848, 17854, 17941 and 17942
17853 6994
1262c 6998
1662c 6999 17886 6984 17854 0994 17855 6994 62136 6977
Starting Lever......................................................
“ “ Hinge Screw.................................
“ “ “ “ Nut “ “ Pitman
Stop Cam.............................................................
“ “ Interlocking Rod
“ “ “ “ Case with
59771 and two 193f...............................................
59769 6977 62137
Stop Cam Interlocking Rod Case Bracket
------
Stoj) Cam Interlocking Rod Case Bracket
complete. Nos 1182e, 1196c, 1204e,
1254c, 1262c, 1318d, 1508e, 1662c,
17853, 17855, 17859, 17861 to 17864,
17872, 17873, 39222, 39223, 39343,
39344, 59769, 62136 and two each 898d,
1186k and 1255d.....................................................
21828 6976
Stop Cam Interlocking Rod Case Bracket
Dowel Pin
NAME
Guard Shaft End Bearing Cap
“ “ “ Collar with
..............................................................
Sot Screw...............................................
.........................................................
“ Collar with two 196f “ “ Set Screw
“ Guide Bracket with 453c. . . .
“ “ “ Set Screw....
“ Lifting Lever....................................
“ “ “ “ Screw. “ “ “ Hinge Screw... “ “ “ Rod
.............................................
“ “ “ “ Chain....
“ Spring...............................................
“ Bushing
“ “ Position Pin
“ Cap Screw
(tight) 2]/s in. diam., with 2269. ..
Pulleys complete Nos. 1202d, 1206c,
.......................................................
.................................
...................
............................
......................................
.......................................
..........................................
.................................
......................................
...................
.......................
..........................................
..................................
16
NO. PLATE NAME
TAKTS FOR MACHINE NO. 114 3
50372i) 7015 Stop Cain Interlocking Roil fiuse Bracket
Screw..............................................................
1204e 6((98 Stop (iain Interlocking Rod Case Hinge
Screw..............................................................
17859 0977 Stop Cam Interlocking Rod Case Socket
Joint
................................................................
898d 0998 Stop Cam Interlocking Rod (tase Socket
Joint Caj) Screw
.............................................
39343 0981 Stop Cam Interlocking Rod Case Siiring
(flat)................................................................
430c 6994 Stop Cam Interlocking Rod Case Spring
Adjii.sting Screw
............................................
1520e 0994 Stoj) Cam Interlocking Rod fiase Spring
Adjusting Screw Nut
......................................
39344 6994 Sto]i C'arn Interlocking Rod C.'ase Spring
Bracket witli 430c and 1520e
........................
1186k 6991 Stop Cam Interlocking Rod Case Spring
Bracket Screw
................................................
17801 09t)4 Stop Cam Interlocking Hod Ca.se Stop
Stud.................................................................
1254c 0998 Stop Cam Interlocking Hod Case Stop
1508e 0999 Stop Cam Interlocking Rod Case Stop
Stud Screw Bushing Lock Nut
.......................
17802 0994 Stoji Cam IntiTlocking Rod Case Stop
1 4 , .s T wil - i r< rr T? / \<l On Wil'l г1 Л 1Г
Stud Spring.....................................................
Block
..............................................................
193k 0983 Stop Cam Interlocking Rod Case Wearing
Block Screw
...................................................
17863 0994 Stop Cam Interlocking Rod Si>ring.......................
17804 0994 “ “ “ “ Stop
.................
1318d 0994 “ “ “ “ “ Screw..
3012 6988 “ “ Rill.......................................................
1200c 6994 “ “ Screw...................................................
2102 0995 Tension Disc
1500c 6it95 “ Regulating Thumb Nut 50148c 0995 “ Screw Stud 42330 0995 “ Spring
13915 0995 “ “ Bushing 10145 0995 “ Thread Guide
..............................................................
..............................
.................................................
.................................................
...................................
.............................................
59772 0995 Thread Eyelet (head of arm)...................................
233n 0995 “ “ “ “ “ Set Screw. .
1743u 6979 “ Nipper Adjusting Thumb Nut...
59773 0995 “ “ Body........................................
624c 0991 “ “ “ Set Screw....................
59774 6995 “ “ Cam with two 50150c... .
PARTS FOR MACHINE NO. 114-3
PLATE
NO.
50150c
2921 6995 12162 6995 62169 6979 59775 6995
1527d 6995
59776 13538 6995 13539 6995
13540 6995
2026 6995
59777 —
Thread Nipper Cam Set Screw
6991
“ “ Disc..........................................................
“ “ “ Guide Pin...............................................
“ “ “ Spring.....................................................
“ “ Eyelet “ “ Lock Nut
6995
“ Stud with 13538
“ “ “ Position Pin
.
............................Roller.................................
“ “ “ “ Pin.......................................................
“ “ “ Spring
Thread Nipper Stud complete. Nos. 13539,
13540 and 59776
59778 ^
-------
Thread Nipper complete, Nos. 1527d,
1743d, 2026, 59773, 59775, 59777, 62169
and two 2921...................................................
62138 6987
208d 6980 227d 7015
59780 6996
1196c 6998
59782 6996 59783 6990
Thread Pull-olT Cam
“ “ “ Screw (large) “ “ “ “ (small)
“ “ Driving Lever...........................................
“ “ “ “ Hinge
Ssi>rP1\"
iiireau ruii-on oijmig.. . .
D'J'JO
“ “ Lever........................................................
“ “ “ Rushing
1445H 6996 “ “ “ “ Screw....
59784 69i)6
“ “ “ Connection
Screw (driving lever end)
501111)
6996 Thread Pull-oll Lever Connection Hinge
Screw (lever end)............................................
59785 6996 Thread Pull-off Regulator
—
62170 42808 0979 62171 6979
337i) 6979 62172 6979 62173
0979 Thread Take-up complete. Nos. 337o,
“ Take-up Body with 62172
“ “ Roller
“ “ “ Cap........................................................
“ “ “ “ Screw..................................................
“ “ “ Pin
42808, 62170 and 62171.................................
691 к
6990 39452 39453 6<)79
330n 6979
1207d 6979
59787 6979
64 Id
39455 6979
Thread Take-up Screw........................................
6979
“ Wiper Body “ “ “ Finger
“ “ “ “ Screw..................................................
“ “ “ Hinge Screw..........................................
“ “ “ Support..................................................
6979
“ “ “ “ Set Screw..
“ “ “ Wire.......................................................
NAME
.......................................................
..................................................
..........................................
...........................................
....................................................
............................................
..........................................
.........................................
................................................
.................................................
............................................
.......................................................
.........................................................
................................................
....................................................
17
............................
...............................
...................................
..........................
Loading...
+ 20 hidden pages
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use