Sinclair ASH-09AIN PT, ASH-12AIN PT Operation Manual

OPERATION MANUAL

ASH-09AIN PT, ASH-12AIN PT

NORDIC SERIE

9

10

11

11

12

13

16

18

19

20

6

5

2

1

SINCLAIR

Structure and operation

Name of each part

Indoor Unit

Outdoor Unit

Air in

Surface panelDisplay

power

plug

Air out

Louver

Zoom in the display

Remote
control

Set Temp

Heating

Cooling

AutoPower/Run

Ｆ anDrying

Drain hose

Air in

Air out

ｐｉｐｅ　ａｎｄ

Connection
pipe and

connecting
wire

The instructions before use

１９５Ｖ

Models & specifications

ASH-09AIN PT ASH-12AIN PT

Cool/Heat Cool/Heat

2500W (1120W~3000) 3600W (1220~4000)

2750W (1200~3200) 4100 (1310~4300)

6.2/6.3 7.0/7.2

6.7 7.2

1400/1450 1600/1650

780/760 1050/1130

550 490

R410A/0.78 R410A/1.15

42/39/36/53 42/39/38/55

8.5/35 11/38

Indoor unit 770 x 190 x 250 830 x 285 x 189

Outdoor unit 848 x 260 x 540 848 x 260 x 540

1. All above should be changed without notice; there are latest and accurate specifications on the nameplate

of your air conditioner.

2. When the unit is restarted after it was stopped, it can automatically resume in its most latest running mode,

and the outdoor unit starts a little bit later.

Working temperature range:

Indoor side DB/WB (°C) Outdoor side DB/WB (°C)

Maximum cooling 32/23 43/26

Maximum cooling 21/15 21/-

Maximum heating 27/- 24/18

Maximum heating 20/- -14/-15

IP24

T1

I

Working temperature range

Model

Air Cleaner

220-240~

50

Noise (Indoor/Outdoor) dB (A)

Climate type

Anti-electric shock protection

Weight (kg) Indoor unit/Outdoor unit

Cooling/Heating power input (W)

Recycling air Volume (m

3

/h)

Refrigerant and weight (kg)

Water proof level

Dimension (mm)

W x H x D

Functions

Accessory

Cooling capacity (W)

Heating capacity (W)

Power supply (V)

Frequency (Hz)

Cooling/Heating rated current (A)

Maximum input current (A)

Cooling/Heating rated power (W)

Note:

Be sure that there is on obstruction.
Don’t drop or throw the remote control.
Don’t place the remote control in a location exposed to direct sunlight.
Whe the unit is restarted after stopped,it can automatically resume its most latest
runningmode,andtheoutdoorunitstartsalittlebitlater.

Romote control operation procedure

Name and Function-Remote conteol

SLEEP Button

Ａｔ　ＣＯＯＬ，　ＤＲＹ，　ＨＥＡＴ

ｍｏｄｅ，　ｐｒｅｓｓ　ｔｈｅ　ｂｕｔｔｏｎ　
ｃｏｕｌｄ　ｓｔａｒｔ　ｔｈｅ　ＳＬＥＥＰ

FAN SPEED Button

Ａｔ　ｕｎｉｔ　ｔｕｒｎｅｄ　ｏｎ，
ｕｎｄｅｒ　ＡＵＴＯ，　ＣＯＯＬ，　ＦＡＮ，
ＨＥＡＴ　ｍｏｄｅｓ，ｐｒｅｓｓ　ｔｈｉｓ

ｂｕｔｔｏｎ　ｃｏｕｌｄ　ｓｅｌｅｃｔ　

ｔｈｅ　Ａｕｔｏ　Ｆａｎ　ｓｐｅｅｄ，　
Ｌｏｗ，　Ｍｅｄ　，　Ｈｉｇｈ　ｆａｎ　
ｓｐｅｅｄ，ｉｎ　ＤＲＹ　ｍｏｄｅ，ｔｈｅ

MODEButton

Ａｔ　ｕｎｉｔ　ｔｕｒｎｅｄ　ｏｎ，ｐｒｅｓｓ　
ｔｈｉｓ　ｂｕｔｔｏｎ　ｃｏｕｌｄ　ｓｅｌｅｃｔ
ＡＵＴＯ，　ＣＯＯＬ，　ＤＲＹ，　ＦＡＮ

CLOCK Button

Ｐｒｅｓｓ　ｔｈｉｓ　ｂｕｔｔｏｎ　ｏｎｃｅ，
ｔｈｅ　ｃｌｏｃｋ　ｉｃｏｎ　ｆｌａｓｈ，　
ｔｈｅ　ｔｉｍｅ　ｃａｎ　ｂｅ　ａｄｊｕｓｔｅｄ．
Ｗｈｅｎ　ｐｒｅｓｓｉｎｇ　ＴＩＭＥ　＋，

ｔｈｅ　ｏｎｅ　ｕｎｉｔｓ　ｏｆ　ｔｈｅ　

ｍｉｎｕｔｅ　ｗｉｌｌ　ｂｅ　ｉｎｃｒｅａｓｅｄ

１，ｃｏｎｔｉｎｕｏｕｓｌｙ　ｐｒｅｓｓ　
１ｓｅｃｏｎｄ　ａｂｏｖｅ，ｔｈｅ　ｔｅｎｓ　
ｐｌａｃｅ　ｏｆ　ｔｈｅ　ｍｉｎｕｔｅ　ｗｉｌｌ
ｂｅ　ｉｎｃｒｅａｓｅｄ　１　ｉｎ　ｅｖｅｒｙ

ｈａｌｆ　ｓｅｃｏｎｄ．　Ｗｈｅｎ　ｐｒｅ－

Ａｔ　ＣＯＯＬ，　ＤＲＹ，　ＦＡＮ　ｏｒ　
ＨＥＡＴ　ｍｏｄｅ，　ｐｒｅｓｓ　ｔｈｅｓｅ
ｔｗｏ　ｂｕｔｔｏｎｓ　ｃｏｕｌｄ　ｓｅｔ
ｕｐ　ｔｈｅ　ｔｅｍｐｅｒａｔｕｒｅ，ｔｈｅ
ｓｅｔｔｉｎｇ　ｒａｎｇｅ　ｉｓ　１６℃
－３０℃，ｉｎ　ｅａｃｈ　ｍｏｄｅ　ｔｈｅ
ｍｅｍｏｒｙ　ｆｕｎｃｔｉｏｎ　ｉｓ　ａｖ－
ａｉｌａｂｌｅ　ｉｎ　Ｔｅｍｐｅｒａｔｕｒｅ

TEMP+ TEMP- Button

ｓｅｔｔｉｎｇ　．

ｏｒ　ＨＥＡＴ　ｍｏｄｅ．

ｆａｎ　ｓｐｅｅｄ　ｉｓ　ｌｏｗ　ｆａｎ

ｓｐｅｅｄ．　Ｅａｃｈ　ｍｏｄｅ．ｔｈｅ

ｍｅｍｏｒｙ　ｆｕｎｃｔｉｏｎ　ｉｓ　
ａｖａｉｌａｂｌｅ　ｉｎ　ｅａｃｈ　ｍｏｄｅ．

ｆｕｎｃｔｉｏｎ，　ｗｈｅｎ　ｒｅｐｒ－

ｅｓｓｅｄ，　ｗｉｌｌ　ｔｕｒｎ　ｏｆｆ
ｔｈｅ　ｆｕｎｃｔｉｏｎ．

ｓｓｉｎｇ　ｔｈｅ　ＴＩＭＥ　－，ｔｈｅ　ｏｎｅ　
ｕｎｉｔｓ　ｏｆ　ｔｈｅ　ｍｉｎｕｔｅ　ｗｉｌｌ

ｂｅ　ｄｅｃｒｅａｓｅｄ　１，ａｎｄ　ｃｏｎｔ－
ｉｎｕｏｕｓｌｙ　ｐｒｅｓｓ　１　ｓｅｃｏｎｄ
ａｂｏｖｅ，ｔｈｅ　ｔｅｎｓ　ｐｌａｃｅ　ｏｆ　
ｔｈｅ　ｍｉｎｕｔｅ　ｗｉｌｌ　ｂｅ　ｄｅｃ－
ｒｅａｓｅｄ　１　ｉｎ　ｅｖｅｒｙ　ｈａｌｆ
ｓｅｃｏｎｄ．Ａｆｔｅｒ　ｓｅｔｕｐ　ｃｏｍ－

ｐｌｅｔｅｄ，Ａｆｔｅｒ　ｓｅｔｕｐ　ｃｏｍ－
ｐｌｅｔｅｄ，ｐｒｅｓｓ　ＣＬＯＣＫ　ｂｕｔｔｏｎ
ｆｏｒ　ｃｏｎｆｉｒｍａｔｉｏｎ．

Note:

This type of remote control is a kind of new current.Some buttons of the control
which have extra function will be described below.

Name and Function-Remote control(continue)

ON/OFF Button

Ｐｒｅｓｓ　ｔｈｉｓ　ｂｕｔｔｏｎ　ｏｎｃｅ

ｔｏ　ｔｕｒｎ　ｏｎ　ｔｈｅ　ｕｎｉｔ，　

T-ON Button

Ｐｒｅｓｓ　ｔｈｉｓ　ｂｕｔｔｏｎ　ｏｎｃｅ，
ｅｎｔｅｒ　ｉｎｔｏ　Ｔ－ＯＮ　ｓｅｔｔｉｎｇ，
ｔｈｅ　Ｔ－ＯＮ　ｉｃｏｎ　ｗｉｌｌ　ｆｌａｓｈ．
Ｗｈｅｎ　ｐｒｅｓｓｉｎｇ　ＴＩＭＥ　＋，

ｔｈｅ　ｔｉｍｅ　ｏｆ　Ｔ－ＯＮ　ｗｉｌｌ　

ｂｅ　ｉｎｃｒｅａｓｅｄ　１　ｍｉｎｕｔｅ，

ｃｏｎｔｉｎｕｏｕｓｌｙ　ｐｒｅｓｓ　１　
１　ｓｅｃｏｎｄ　ａｂｏｖｅ，　ｔｈｅ　ｔｅｎｓ

ｐｌａｃｅ　ｏｆ　ｔｈｅ　ｍｉｎｕｔｅ　ｗｉｌｌ
ｂｅ　ｉｎｃｒｅａｓｅｄ　１　ｉｎ　ｅｖｅｒｙ

TIME+ Button

Ｆｕｎｃｔｉｏｎ　ｉｎｓｔｒｕｃｔｉｏｎ

ｐｌｅａｓｅ　ｒｅｆｅｒ　ｔｏ：　Ｔ－ＯＮ

ｗｈｅｎ　ｒｅｐｒｅｓｓｅｄ　ｔｏ　ｔｕｒｎ

ｏｆｆ　ｔｈｅ　ｕｎｉｔ．

ｈａｌｆ　ｓｅｃｏｎｄ，　ｗｈｅｎ　ｐｒｅｓｓｉｎｇ
ＴＩＭＥ　－，　ｗｉｌｌ　ｄｅｃｒｅａｓｅ　
１ｍｉｎｕｔｅ，ｃｏｎｔｉｎｕｏｕｓｌｙ　
ｐｒｅｓｓ　１　ｓｅｃｏｎｄ　ａｂｏｖｅ，　
ｔｈｅ　ｔｅｎｓ　ｐｌａｃｅ　ｏｆ　ｍｉｎｕｔｅ

ｗｉｌｌ　ｂｅ　ｄｅｃｒｅａｓｅｄ　１　ｉｎ　
ｅｖｅｒｙ　ｈａｌｆ　ｓｅｃｏｎｄ，　ｔｈａｔ
ｗｉｌｌ　ｃｉｒｃｕｌａｔｅ　ｉｎ　１２ｈｏｕｒｓ．

ｂｕｔｔｏｎ，　Ｔ－ＯＦＦ　ｂｕｔｔｏｎ，
ＣＬＯＣＫ　ｂｕｔｔｏｎ．

Liquid crystal displayer

Ｉｔ　ｓｈｏｗｓ　ａｌｌ　ｓｅｔ
ｃｏｎｔｅｎｔｓ．

Ｐｒｅｓｓ　ｔｈｉｓ　ｂｕｔｔｏｎ　ｏｎｃｅ，　ｅｎｔｅｒ　
ｉｎｔｏ　Ｔ－ＯＦＦ　ｓｅｔｔｉｎｇ，ｔｈｅ　Ｔ－ＯＦＦ
ｉｃｏｎ　ｆｌａｓｈｅｓ．Ｔｈｅ　ｆｕｎｃｔｉｏｎ

T-OFF Button

ｉｓ　ｖａｉｌａｂｌｅ　ｉｎ　ｔｕｒｎ　ＯＮ　ｏｒ　

TIME- Button

Ｔｈｅ　ｆｕｎｃｔｉｏｎ　ｉｎｓｔｒｕｃｔｉｏｎ

ｐｌｅａｓｅ　ｒｅｆｅｒ　ｔｏ　：　Ｔ－ＯＮ　

CANCEL Button

Ｐｒｅｓｓ　ｔｈｉｓ　ｂｕｔｔｏｎ　ｏｎｃｅ，

ｃａｎｃｅｌ　ａｌｌ　Ｔｉｍｅｒ　ｓｅｔｔｉｎｇ．

ｔｕｒｎ　ＯＦＦ　ｓｔａｔｅ．Ｔｈｅ　ｍｅｔｈｏｄ
ｏｆ　ｓｅｔｕｐ　ｉｓ　ｔｈｅ　ｓａｍｅ　ｗｉｔｈ　Ｔ－ＯＮ．

ｂｕｔｔｏｎ，　Ｔ－ＯＦＦ　ｂｕｔｔｏｎ，

ＣＬＯＣＫ　ｂｕｔｔｏｎ．

Ａｔ　ｏｐｅｒａｔｉｎｇ，Ｗｈｅｎ　ｉｔ　ｉｓ　
ｐｒｅｓｓｅｄ，ｔｈｅ　ｌｏｕｖｅｒｓ　ｓｔａｒｔ

SWING Button

ｔｏ　ｒｏｔａｔｅ　ａｕｔｏｍａｔｉｃａｌｌｙ　ａｎｄ
ｓｔｏｐ　ｗｈｅｎ　ｒｅｐｒｅｓｓｅｄ　ａｇａｉｎ．
Ｗｈｅｎ　ｐｒｅｓｓ　ｉｔ　ｔｗｉｃｅ　ｉｎ　ｏｎｅ

ｓｅｃｏｎｄ，ｔｈｅ　ｌｉｇｈｔ　ｏｎ　ｔｈｅ　ｐａｎｅｌ
ｏｆ　ｉｎｄｏｏｒ　ｕｎｉｔ　ｗｉｌｌ　ｂｅ　ｔｕｒｎｅｄ
ｏｎ．　Ｗｈｅｎ　ｐｒｅｓｓ　ｉｔ　ｔｗｉｃｅ　ｉｎ
ｏｎｅ　ｓｅｃｏｎｄ　ａｇａｉｎ，ｔｈｅ　ｌｉｇｈｔ
ｗｉｌｌ　ｂｅ　ｔｕｒｎｅｄ　ｏｆｆ．

Don’t confuse the new and worn or different batteries.
Remove batteries when not in use for a longtime.
The batteries can be used for about one year.
The remote control should be lm or more away from television or audio device.

Howtoinsertbatteries

1.Remove the cover from the back of the remote control.

2.Insert the two batteries(Two AAA dry-cell batteries).

3.Re-attach the cover.

NOTE:

Ｔｈｅ　ｓｋｅｔｃｈ　ｍａｐ　ｆｏｒ　ｂａｔｔｅｒｉｅｓ　ｃｈａｎｇｅ

Operation Guided

9

Plasma Technology PLASMA TEC

Plasma Air Purification Technology PLASMA TEC produces a natural bio-climate rich in active oxygen
molecules, known as ions. It creates optimal quantity of positive and negative oxygen ions. Such an ion-enriched
environment is notably cleaner and fresher. Plasma Technology has the capacity of breaking down bacteria into
harmless particles, air purification, odor neutralization and reduction of particles in the air. All these
qualities make PLASMA TEC Technology invaluable also for allergic persons.

10

Installtion location

Installtion

Indoor Unit

9．　

10．

2.3

O utdoor unit

11

Electric wiring

Earth requirement

Installation dimension diagram

12

２３０

ASH-09AIN
ASH-12AIN

13

Install the indoor unit

Electric wiring

Install the connection pipes

Install the drainage hose

Install the piping hole

Install the rear panel

12

14

ASH-09AIN

ASH-12AIN

black

the brown one to 3

Black

Brown

15

Install the indoor unit

16

Install the outdoor unit

Install the connection pipe

Electric wiring connection

Black

Brown

17

Electric heating belt

Air purging and leakage test

18

Test operation and check after installation

Test operation

Check after installation

Care and maintenance

Care and maintenance

19

20

21

22

ENVIRONMENTAL INFORMATION

This unit contains fluorinated gases with greenhouse effect covered by the Kyoto Protocol.
Maintenance and disposal must be carried out by qualified persons only.
Refrigerant gas R410A, GWP = 1730

EXTRA REFRIGERANT CHARGE

Pursuant to Regulation EC 842/2006 on certain fluorinated greenhouse gases, in case of extra
refrigerant charge, it is compulsory to:

- Fill in the label accompanying the unit inserting the factory quantity of refrigerant

charge (see the technical label), the extra refrigerant charge and the total charge.

- Apply the label next to the technical label applied on the unit. For the split-type air

conditioner apply on the outdoor unit.