SIMRAD OP12 Autopilot Controller Manual

Page 1
Technical specications
Weight 0.15 kg (0.33 lbs) Power supply 9 - 16 V
Power consumption (@ 13.5 V) Backlight OFF: 0.81 W (60 mA)
Backlight MAX: 1.38 W (102 mA) Network load 3 LEN Housing PC/ABS Waterproofing standard IPx7 Operating temperature -25°C to +65°C (-13°F to +149°F) Storage temperature -40°C to +85°C (-40°F to +185°F) Maximum humidity 100% RH Connectors 1x male Micro-C
Other documentation available on:
www.simrad-yachting.com
OP12 Autopilot controller
User Guide
English
*988-11209-002*
Dimensions and mounting Wiring
35 mm
(1.37")
25.5 mm (1.00")
88 mm (3.46")
115 mm (4.52")
STBY AUTO
60 mm (2.36")
<10 10>
<1
MODE
8 mm (0.31")
1>
www.simrad-yachting.com
<10 10>
1>
<1
STBY AUTO
MODE
A
B
Micro-C Drop cable (female to male) max drop 6 m/20 ft
A
Micro-C T-connector
B
NMEA 2000 backbone
C
CC
Page 2
OperationBox content
1
6
7
4
5
Autopilot controller
1
Micro-C Drop cable 0.6 m/2 ft
2
Documentation pack
3
Mounting screws (4 x #4 x 3/8” PN HD SS screws)
4
Micro-C T-connector
5
Bezel
6
Sun cover
7
2
1
<10 10>
2
3
Installation Manual
ENGLISH
Installation Manual
ENGLISH
Installation Manual
ENGLISH
5
bandg.com
bandg.com
bandg.com
bandg.com
<1
STBY AUTO
MODE
1>
3
4
Operation
LED
1
Mode and alarm indicator:
AUTO mode: solid light
Wind mode: flashing (80% on, 20% off)
NAV mode; flashing (40% on, 60% off)
Alarm on the network: rapid flashing
Green in Day mode and red in Night mode.
¼ Note: No LED indication for NoDrift and Non-Follow
modes.
Port and starboard keys
2
In Standby mode: press to activate Non Follow Up mode (NFU)
In AUTO mode:
Press a key to change set heading 1° or 10° to port or starboard
For boat types set to SAIL: press and hold both port keys or both starboard keys to start a tack/gybe
In NoDrift mode:
Press a key to change set heading 1° or 10° to port or starboard
In Wind mode:
Press to change set wind angle 1° or 10° to port or starboard
Press both 1° keys to start a tack/gybe
AUTO key
3
Press to activate AUTO mode.
MODE key
4
¼ Note: Only used when the autopilot is in AUTO or NoDrift
mode.
Press once to select mode:
For boat type set to SAIL: activates Wind mode (A)
For other boat type settings: activates NoDrift mode (B)
Press and hold to activate NAV mode (C)
STBY key
5
Press to activate Standby mode.
Loading...