CS601S
installation guide
222mm
165mm
470mm (max.)*
1240mm (max.)
540mm
230mm
500mm
600/900mm
20mm
canopy rangehoods
Models: CS601S, CS901S
*1100mm extension flue cover is available if required where high ceilings are present. (Model No. AR500FS)
All measurements in millimetres.
Current as at May 2006. © 2006 Electr olux Home Products Pt y Ltd. SRANIDC ANOPY 05/ 06
page 1 of 3
installation guide
245mm
490mm
Minimum:
Electric 600mm
Gas 650mm
Maximum:
800mm
Hood base
Flue cover mounting brackets
Note: Some installations may require telescopic flue
cover to be cut to length. Cut with tin snips or
fine tooth hack saw blade, taking care not to
distort or dent flue cover.
Top of hob
38mm
65mm65mm
75mm75mm
303mm
(or 203 mm on
600mm wide canopy)
303mm
(or 203 mm on
600mm wide canopy)
Rear Exhaust
to atmosphere
Top Exhaust
to atmosphere
Side Exhaust
to atmosphere
Recirculating
Exhaust*
canopy rangehoods
Models: CS601S, CS901S
* In recirculating mode you must use a recirculating kit which includes carbon filters
to eliminate cooking smells. (Model No. AR500RK)
All measurements in millimetres.
Current as at May 2006. © 2006 Electr olux Home Products Pt y Ltd. SRANIDC ANOPY 05/ 06
page 2 of 3
ducting accessories
AR500FS
AR125R C
AR125F
AR125F D
Alternative flue connection
Flashing
not supplied
AR125B
AR500RK
AR125WV
AR125FJ/AR125FJD
AR500CF
canopy rangehoods
Models: CS601S, CS901S
Part Numbers Description
AR125RC Roof Cowl
AR125B 90° Bend
AR125F Flue 1200mm Long
AR125FD Flexible Duct – 1 metre long when expanded
AR125WV Wall Vent Kit
AR500FS Extra Length Flue Cover 1100mm length brushed stainless steel
AR500RK Recirculating Kit (includes AR500CF x 2)
AR500CF Replacement Carbon Filters
AR125FJ Flue Joiner without damper
AR125FJD Flue Joiner with damper
Current as at May 2006. © 2006 Electr olux Home Products Pt y Ltd. SRANIDC ANOPY 05/ 06
page 3 of 3
Loading...