Page 1
Attachment
g
Illustrated
Parts List
Attachment
. No. Description
Mf
1695169 Catcher, Clean Sweep, Triple
MANUFACTURING, INC.
500 N. Spring Street / PO Box 997
Port Washington, WI 53074-0997 USA
www.simplicitymfg.com
© Copyright Simplicity Manufacturing, Inc. All Rights Reserved. Printed In USA.2007
Rev.
1734812
04/2007
Part No.:
TP 400-4533-00-AT-SMA
Page 2
Page 3
Table Of Content
s
PRODUCT COMPONENTS PAGES
Triple Catcher Assembler ....................................................................................................................................
Torque Specification Chart ..................................................................... Inside Back Cover
4
Page 4
Triple Catcher Assembler
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1695169
The above parts group applies to the following Mfg. Nos.:
1695169 - Catcher
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
4
TP 400-4533-00-AT-SMA
Page 5
Triple Catcher Assembler
PART NO. DESCRIPTIONREF NO QTY.
Footnotes
COVER ASSEMBLY, Triple Catcher 1 1733546SM 1
SCREW, Truss Head Phillips, 10 - 24 x 3/4 2 1960404SM 2
HANDLE, Plastic 3 054537MA 1
NUT, Hex Lock, 10-24 w/Nylon Insert 4 1933896SM 2
CLIP, Tube Grass Bag 5 1733709SM 3
BAG, Triple Regular 6 1733695SM 3
BOLT, Carriage, 5/16 - 18 x 3/4, G5 7 1931333SM 6
HOOP, Triple 8 1733517SM 3
HANGER, Grass Bag 9 1703807ASM 3
CLAMP, Grass Bag Plain 10 1672023ASM 3
LOCKWASHER, Spring, 5/16 11 1917356SM 6
NUT, Hex, 5/16 - 18 12 1917372SM 6
SCREW, Hex Washer Head Taptite, 5/16 - 18 x 3/4 13 1664847SM 8
BRACKET, Tab Cross Support Triple 14 1733624ASM 1
NUT, Hex Whiz Lock Flange, 3/8 - 16 (Included in Ref. No. 58) 15 1928352SM 8
CHANNEL, Cross Support Triple 16 1733623ASM 1
SUPPORT, Upright 17 1707526ASM 1
SCREW, Hex Whiz Lock Flange, 3/8 - 16 x 1 (Included in Ref. No. 58) 18 1934654SM 8
SUPPORT ASSEMBLY 19 1733627SM 1
CLIP, Hair Pin, 1/8 DIA (Included in Ref. No. 58) 20 1960033SM 1
BOLT, Shoulder, 5/16 - 18 (Included in Ref. No. 58) 21 1728976SM 2
NUT, Speed, 5/16 - 18 (Included in Ref. No. 58) 22 1960717SM 2
BAFFLE, Blowout L.H. 50" Mower Deck 23 1716870ASM 1
BAFFLE, Blowout L.H. 44" Mower Deck 23 1716879ASM 1
BOLT, Carriage, 5/16 - 18 x 5/8 (Included in Ref. No. 58) 24 1931332SM 9
NUT, Hex Whiz Lock Flange, 5/16 - 18 (Qty. of 9 included in Ref. No. 58) 25 1927557SM 11
BAFFLE, Blowout R.H. 50" Mower Deck 26 1726364ASM 1
BAFFLE, Blowout R.H. 44" Mower Deck 26 1731990ASM 1
ROD, Boot Mount, Deflector Prop, 44/50" 27 1733946SM 1
PLATE, Chute Rod (Included in Ref. No. 58) 28 1726578ASM 1
SCREW, Hex Head, 5/16 - 18 x 3/4 29 1960371SM 1
SCREW, Hex Whiz Lock Flange, 5/16 - 18 x 1-1/4 (Qty. of 2 included in Ref. No. 58) 30 1930595SM 3
NUT, Hex Flange Two-Way Lock, 5/16 - 18 31 1935048SM 1
STRAP, Hood 32 2171600SM 2
BOLT, Carriage, 1/4 - 20 x 5/8 33 1960252SM 1
PIN, Latch 34 054563MA 1
SCREW, 1/4 - 20 x 1 35 004x71MA 1
SCREW, 1/4 - 20 x 1/2 36 004x24MA 1
ELBOW, Upper Tube Poly 37 1733885SM 1
TUBE, Clear Poly 38 1732552SM 1
HANDLE, Connect Tube 39 054416ZMA 1
NUT, Hex Keps, 1/4 - 20 40 1928372SM 2
NUT, Hex Flange Top-Lock, 1/4 - 20 41 1930642SM 2
TUBE, Boot Poly 42 1731426SM 1
The above parts group applies to the following Mfg. Nos.:
1695169 - Catcher
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
5
TP 400-4533-00-AT-SMA
Page 6
Triple Catcher Assembler
NOTE: Unless noted otherwise,
use the standard hardware torque
specification chart.
1695169
The above parts group applies to the following Mfg. Nos.:
1695169 - Catcher
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
6
TP 400-4533-00-AT-SMA
Page 7
Triple Catcher Assembler
PART NO. DESCRIPTIONREF NO QTY.
58 1660954SM 1
PIVOT, Hinge 46 1733504ASM 2
SCREW, 1/4 x 3/4 (Included in Ref. No. 58) 47 26x239MA 1
PLATE, Reinforcement, Upright (Included in Ref. No. 58) 48 1733948ASM 1
STICKER, Serial w/Bar Code (Not Serviceable) 49 ----- 1
MYLAR OVERLAY 50 ----- 1
PLATE, Reinforcement Frame 51 1733903ASM 1
RIVET, Pop 52 1673320SM 18
WASHER, Rivet 53 1910531SM 12
FASTENER, Panel 54 1732490SM 5
SCREEN, 19-3/4 x 38 55 1732492SM 1
SUPPORT, Screen 56 1732493SM 1
DECAL, Warning Thrown Objects 57 1732819SM 1
HARDWARE BAG (Not Shown. Includes Ref. Nos.15, 18, 20, 21, 22, 24, 25, 28, 30, 43, 45,
47 & 48)
INSTRUCTION MANUAL -- 1733866 1
Footnotes
The above parts group applies to the following Mfg. Nos.:
1695169 - Catcher
Briggs and Stratton Yard Power Products Group
Milwaukee, WI, USA. All rights reserved
2007Copyright © by Briggs and Stratton Corporation
7
TP 400-4533-00-AT-SMA
Page 8
Page 9
Page 10
Page 11
Hardware Identification & Torque Specifications
Common Hardware Types
Hex Head Capscrew
Carriage Bolt
Standard Hardware Sizing
When a washer or nut is identified as 1/2”, this is the
Nominal size
second number is present it represent the
When bolt or capscrew is identified as 1/2 - 16 x 2”, this
means the
second number represents the
example, and the final number is the
bolt or screw (in this example 2 inches long).
, meaning the
Nominal size
inside diameter
, or
body diameter
threads per inch
body length
Washer
Lockwasher
Hex Nut
is 1/2 inch; if a
threads per inch
is 1/2 inch; the
(16 in this
of the
The guides and ruler furnished below are designed to
help you select the appropriate hardware and tools.
0
1/4 3/4
1/2
Nut, 1/2”
Inside
Diameter
1
1/4 3/4
1/2
Screw, 1/2 x 2
2
1/4 3/4
1/2
3
1/4 3/4
1/2
4
Body
Diameter
Body
Length
Torque Specification Chart
FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)
Hardware
Grade
Size Of
Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.
8-32
8-36
10-24
10-32
1/4-20
1/4-28
5/16-18 11 15.0 17 23.1 25 34.0
5/16-24 12 16.3 19 25.8 27 34.0
3/8-16 20 27.2 30 40.8 45 61.2
3/8-24 23 31.3 35 47.6 50 68.0
7/16-14 30 40.8 50 68.0 70 95.2
7/16-20 35 47.6 55 74.8 80 108.8
1/2-13 50 68.0 75 102.0 110 149.6
1/2-20 55 74.8 90 122.4 120 163.2
9/16-12 65 88.4 110 149.6 150 204.0
9/16-18 75 102.0 120 163.2 170 231.2
5/8-11 90 122.4 150 204.0 220 299.2
5/8-18 100 136 180 244.8 240 326.4
3/4-10 160 217.6 260 353.6 386 525.0
3/4-16 180 244.8 300 408.0
7/8-9 140 190.4 400 544.0 600 816.0
7/8-14 155 210.8 440 598.4 660 897.6
1-8 220 299.2 580 788.8 900 1,244.0
1-12 240 326.4 640 870.4 1,000 1,360.0
1. These torque values are to be used for all hardware
excluding: locknuts, self-tapping screws, thread forming
screws, sheet metal screws and socket head setscrews.
2. Recommended seating torque values for locknuts:
a. for prevailing torque locknuts - use 65% of grade 5
torques.
b. for flange whizlock nuts and screws - use 135% of
grade 5 torques.
3. Unless otherwise noted on assembly drawings, all torque
values must meet this specification.
No
Marks
SAE Grade 2 SAE Grade 5 SAE Grade 8
in/lbs in/lbs
19
2.1
20
2.3
27
3.1
31
3.5
66
7.6 8 10.9 12 16.3
76
8.6 10 13.6 14 19.0
30
31
43
49
NOTES
3.4
3.5
4.9
5.5
in/lbs
41
43
60
68
420 571.2
4.6
4.9
6.8
7.7
Wrench & Fastener Size Guide
1/4
1/4” Bolt or Nut
Wrench—7/16”
5/16
5/16” Bolt or Nut
Wrench—1/2”
3/8
3/8” Bolt or Nut
Wrench—9/16”
7/16
DIA.
7/16” Bolt or Nut
Wrench (Bolt)—5/8”
Wrench (Nut)—11/16”
1/2
DIA.
1/2” Bolt or Nut
Wrench—3/4”
Page 12
Loading...