Simplicity 2690783, 2690782, RD User Manual

Not for

Reproduction

Parts Manual

g

Regent RD

Series Lawn Tractor

19.5HP Product

. No. Description

Mf

2690782 Regent RD, 19.5HP B&S Hydro and 40" Mower Deck

22HP Product

Mfg. No. Description

2690783 Regent RD, 22HP B&S Hydro and 40" Mower Deck

(CE/Export)

Rev.

1736068 03/2009

Part No.:

TP 400-4848-D-RG-S

Not for

Reproduction

Not for

Reproduction

Table Of Content

s

PRODUCT COMPONENTS PAGES

Frame & Front Axle Group ...................................................................................................................................

Steering Group .....................................................................................................................................................

Engine Group .......................................................................................................................................................

Controls Group .....................................................................................................................................................

Electrical Group ....................................................................................................................................................

Hood, Grille & Dash Group ..................................................................................................................................

Seat Deck & Fuel Group ......................................................................................................................................

Mulching Flap Group ............................................................................................................................................

Lift Group - Manual ..............................................................................................................................................

Wheels & Tires Group ..........................................................................................................................................

Decals Group .......................................................................................................................................................

Back Plate Group .................................................................................................................................................

Collector Group ....................................................................................................................................................

40" Mower Deck - Belt & Idler Arm Group ...........................................................................................................

40" Mower Deck - Housing, Hitch, Arbors & Blades Group ................................................................................

Torque Specification Chart ..................................................................... Inside Back Cover

10 14 18 20 22 24 26 28 30 34 36 40

4 6 8

Not for

Reproduction

Frame & Front Axle Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988017

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

4

TP 400-4848-D-RG-S

Not for

Reproduction

Frame & Front Axle Group

PART NO. DESCRIPTIONREF NO QTY.

Cap, Hub 1.51D 1 1726504SM 2 Ring, Klipring 2 1611710SM 2 Washer .828 x 1.62 x .0583 3 2860183SM 4 Axle, Front (Includes Ref. Nos. 1, 2, 3, 17 & 19) (Includes Ref. Nos. 1, 2, 3, 17 & 19) 5 1728018SM 1 Bushing, Axel Pivot 6 1730186SM 2 Hook, Hitch .312THK 7 1721918ASM 1 Capscrew HD 7/16-14 x 1.5 8 1960652SM 2 Nut, Hex-Flange 5/8-11LK 11 2860646SM 1 Nut, Hex-Flange 5/16-18LK 12 1931277SM 2 Capscrew, Hex 3/8-16 x 1.25 13 1960032SM 2 Spacer 15 1731912SM 2 Rod, Tie 16 1728080ASM 1 Spindle & Cup Assembly RH 17 1727872ASM 1 Nut, Hex-Flange 3/8-16 LK 18 1930645SM 2 Spindle & Cup Asmy LH 19 1727873ASM 1 Tower 20 1727260SM 1 Frame 21 1736499YP 1 Bolt M8 x 75 22 1735874YP 2 Nut M8 23 1735934YP 2 Washer 8.4 24 1735989YP 6 Washer 8 25 1736000YP 6 Screw, Tap 5/16-18 x 0.62 26 1930601SM 4 Bolt M8 x 20 27 1735868YP 4 Pivot, Hood 29 1728086SM 2 Support, Muffler 30 1735973YP 1 Bolt, RD HD 5/16-18 x 1.0 31 1931335SM 2 Washer 0.625 32 1960035SM 1 Capscrew, Hex 5/8-11 x 3.250 33 2860744SM 1 Link, Drag 34 1735919YP 1 Ball-Joint, CS16 M10-M12 35 1735851YP 2 Nut M12 36 1735928YP 2 Distance, Front Axle 0-9521-291 37 1735892YP 2 Nut M10 DIN6923 8 38 1735926YP 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

5

TP 400-4848-D-RG-S

Not for

Reproduction

Steering Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988023

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

6

TP 400-4848-D-RG-S

Not for

Reproduction

Steering Group

PART NO. DESCRIPTIONREF NO QTY.

Shaft, Steering Gear & Spline 1 1727813SM 1 Washer 0.750 2 1960114SM 2 Bushing 3 1729665SM 2 Steering Wheel 4 1728069SM 1 Nut, Hex-Lock 5/8-18 6 1960576SM 1 Cap, Steering Wheel Simplicity 7 1722319SM 1 Nut M8 8 1735934YP 4 Bracket, Sector Support 9 1727940SM 1 Bolt M8 x 25 10 1735870YP 4 Gear, Steering .250 THK 26 Teeth 11 1728027SM 1 Spacer, Sector Gear 12 1728122SM 2 Screw, Hex LK Flange 3/8-16 x 1.00 13 1934654SM 2 Nut, Hex-Flange 3/8-16 LK 14 1931211SM 2 Ring, Klipring 15 1611710SM 1 Washer 8.4 16 1735989YP 4 Washer 8 17 1736000YP 4

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

7

TP 400-4848-D-RG-S

Not for

Reproduction

Engine Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988015

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

8

TP 400-4848-D-RG-S

Not for

Reproduction

Engine Group

PART NO. DESCRIPTIONREF NO QTY.

ENGINE, 19.5HP B&S Intek Single (Model # 441777 Type # 0128 Trim # B1) 1* 1 ENGINE, 22HP B&S Intek Twin (Model # 31P677 Type # 0116 Trim # B1) 1* 1 Valve Shut-Off 2 1717473SM 1 Shield, Heat 4 1735962YP 1 Screw, TAPTT 5/16-18 x 0.62 5 1930601SM 4 Shield, Heat (19.5HP) 6 1727996SM 1 Shield, Heat (22HP Twin) 6 1727997SM 1 Muffler B&S Twin (22HP Twin) 7 1727994SM 1 Bracket, Muffler Mount 8 1727976SM 1 Pipe, Exhaust RH Side (22HP Twin) 9 1727979SM 1 Pipe Exhaust LH Side (22HP Twin) 10 1727980SM 1 Muffler B&S Single (19.5HP) 12 1727993SM 1 Pipe, Exhaust (19.5HP) 13 1728959SM 1 Screw, TAPTT 1/4-20 x 0.5 14 1925003SM 4 Clip, Wire 15 2834683SM 1 Control, Throttle Single (19.5HP) 16 1734504SM 1 Control – Throttle Twin (22HP Twin) 16 1734505SM 1 Clamp, Hose UM5008 17 1735883YP 2 Hose, Fuel 1-9920-247 18 1735913YP 1 Clip, Hose 19 1730268SM 2 Screw, TAPTT 3/8-16 x 1.00 (19.5HP) 20 2827187SM 3 Washer, LK EXT-TOOTH .375 21 2820427SM 1 Washer, Flat .38 22 1924940SM 1 Pulley & Hub Assembly 24 1732576SM 1 Tie 25 1735980YP 1 Rod, Clutch Retainer, Long (BLK) 26 1732875SM 1 Clutch, Electric (LONG OGURA) 28 1732833SM 1 Washer, Hex .453 29 1708264SM 1 Lockwasher 7/16 30 1918199SM 1 Capscrew, Hex-Head 7/16-20 x 3.50 31 1960649SM 1 Gasket, Exhaust 32 1731214SM 1 Screw, Hex-Head T/R .38-16 x 1.25 33 2828635SM 1 Screw 34 1936228SM 2 Lockwasher 35 1917356SM 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

9

TP 400-4848-D-RG-S

Not for

Reproduction

Controls Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988009

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

10

TP 400-4848-D-RG-S

Not for

Reproduction

Controls Group

PART NO. DESCRIPTIONREF NO QTY.

Pedal, Forward 1 1735940YP 1 Ratchet 2 1735952YP 1 Arm 3 1735847YP 1 Pedal, Brake 4 1735941YP 1 Lever, Parking Brake 5 1735918YP 1 Lever, Brake 6 1735917YP 1 Rod, Traveling 7 1735959YP 1 Rod, Brake 8 1735957YP 1 Pulley, Tensioning 9 1735951YP 1 Pulley, Idler (Includes References: 52, 71, 72, 73, 74, 75, 76, 77, & 78) 10 1735950YP 1 Holder, Left 11 1735910YP 1 Holder, Right 12 1735911YP 1 Support, Switch 13 1735974YP 1 Latch, Brake Lock 14 1735595ASM 1 Pedal, Reverse 15 1727246SM 1 Pad, Foot Pedal 16 1727259SM 1 Latch, Cruise 17 1727897SM 1 Rod, Cruise .312DIA 2.83 LG 18 1727899SM 1 Bolt, Shoulder 5/16-18 x 1.62 LG 19 1728976SM 1 Spacer, Foot Pedal 20 1728024SM 1 Rod, Cruise, Latch, Upper 21 1727898SM 1 Rod, .250dia 15.95 LG 22 1727267SM 1 Bushing 0-9421-418 23 1735880YP 2 Washer, Lock 24 1736001YP 1 Spring, Flat 0-9740-221 25 1735972YP 1 V-Belt, 13 x 2580 Li BBT 26 1735987YP 1 Pulley Compensa C-00237/1 27 1735949YP 2 Pedal, Forward Rubber 28 1735942YP 1 Bolt 0-9016-447 29 1735853YP 1 Pedal, Brake Pad 30 1727261SM 1 Spring TLZ 250.150.0530 Yellow 31 1735968YP 1 Spacer, Pivot 32 1727935SM 1 Distance, Pedal 0-9521-288 33 1735896YP 4 Bushing 0-9462-202 34 1735881YP 4 Ball-Joint, CS 13 DIN 71802 M8 Silver 35 1735850YP 1 Clip Linkage .250 dia 36 1728111SM 2 Spring, TZ 2x14 x 62 Yellow 37 1735969YP 1 Pedal, Forward Top 38 1735943YP 1 Bolt, Eye M6 x 80 BN1006 39 1735875YP 1 Bolt M6 x 16 40 1735866YP 1 Washer 6.4 41 1735998YP 2 Nut M8 43 1735936YP 1 Spindle 2 x 20 44 1735963YP 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

11

TP 400-4848-D-RG-S

Not for

Reproduction

Controls Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988009

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

12

TP 400-4848-D-RG-S

Not for

Reproduction

Controls Group

PART NO. DESCRIPTIONREF NO QTY.

Pin, Flex 5 x 25 45 1735946YP 4 Lock Ring 12 46 1735920YP 4 Bolt, RD HD SH SQ NK 5/16-18 x 1.25 47 1960223SM 2 Nut, Hex-Flange 5/16-18 x 1.62 48 1931277SM 4 Bolt M10 x 40 49 1735855YP 2 Washer 10.5 50 1735990YP 2 Washer 10.0 51 1735991YP 2 Nut M10 52 1735925YP 4 Lock Ring 16 53 1735921YP 1 Screw, Tap 5/16-18 x 0.62 54 1930601SM 1 Nut M10 55 1735924YP 1 Nut M8 DIN 6923 8 Yellow, Tooth 56 1735938YP 1 Bolt M8 x 45 57 1735873YP 1 Washer 8.4 58 1735989YP 7 Nut M8 59 1735934YP 7 Washer 8 60 1736000YP 5 Bolt M8 x 75 61 1735874YP 4 Bolt, Shoulder 5/16-18 x 1.15 63 1729576SM 1 Transmission, K-46HD 64 1729589SM 1 Nut M6 66 1735933YP 3 Spring 67 2159181SM 1 Washer 14 x 26/0.2 68 1735994YP 3 Nut M8 69 1735935YP 1 Bolt M8 x 16 70 1735854YP 1 Screw, M10 x 45 71 1736455YP 2 Lock Ring, 40 72 1736456YP 2 Bushing, Pulley, Tension 73 1736457YP 2 Pulley 74 1736458YP 1 Ball-Bearing, Pulley, 62032RS 75 1736459YP 1 Washer, 11, Zinc 76 1736460YP 2 Arm, Pulley, Tension 77 1736461YP 1 Bearing, Slide 78 1736462YP 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

13

TP 400-4848-D-RG-S

Not for

Reproduction

Electrical Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988014

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

14

TP 400-4848-D-RG-S

Not for

Reproduction

Electrical Group

PART NO. DESCRIPTIONREF NO QTY.

Harness, Main 1 1735475YP 1 Support, Battery 2 1727282SM 1 Screw, Hex Washer Head, TAPTITE .31-18 x .62 3 1930601SM 4 Battery, 12V 230 AMP CCA DRY 4 1685215SM 1 Hold Down, Battery 5 1730007SM 1 Bolt, Round Head Carriage .25-20 x .88 6 1931318SM 1 Washer, Flat .25 7 1960353SM 1 Nut, Push .25 8 1960518SM 1 Nut .25 ESNA 9 1920397SM 1 Solenoid, 12V 10 1728963SM 1 Screw, Hex-Washer Head TAPTITE .25-20 x .50 11 1925003SM 2 Switch Assembly, Ignition (Includes References 13, 14, 15, & 16) 12 1716061YP 1 Washer .62 13 2101025SM 1 Lock Washer, Int. Tooth .62 14 1960547SM 1 Nut, Hex-Flange, Ignition Switch .62 - .32 15 1717549SM 1 Cover, Ignition Switch 16 1717550SM 1 Hour Meter (22HP Twin) 17 1728068SM 1 Plug, Hour Meter (19.5HP) 18 1729993SM 1 Switch, PTO 19 1722887SM 1 Switch, RMO Module 20 1726556SM 1 Switch, Head lights 22 1716951SM 1 Plug 23 1722611SM 1 Switch, Push (Foot Pedal) 27 1732006SM 1 Switch, Push NC (Seat) 28 1732005SM 1 Cable, #6 10.0 Lg Red 29 1716549SM 1 Cable, #6 25.0 Lg Red 30 1721830SM 1 Cable, #6 20.0 Lg Black 31 1713163SM 1 Lockwasher, Spring .25 32 2816964SM 2 Nut, Hex KEPS LK .31-24 34 2860750SM 2 Capscrew, Hex .25-20 x .75 35 2823341SM 2 Washer, Flat .25 36 2821319SM 2 Nut, Hex .25-20 37 2816622SM 2 Boot, Insulator, Battery 38 1677296SM 1 Boot, Insulator, Red 39 1713535SM 1 Tie, RT 360 /L=150/ 40 1735980YP 5 AUX. Plug, 12V, (With Cover) 42 7073090SM 1 Switch, NO (RMO) 43 1732004SM 1 Nut, Flange, Whiz .25-20 45 1960294SM 1 Key, RMO Module 46 1726557SM 1 Microswitch, MKH 12 D13 S1 47 1735922YP 2 Beeper, PF 27 A 29 EP 48 1735852YP 1 Wire 9-8316-616 49 1736003YP 1 Wire 9-8316-615 50 1736002YP 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

15

TP 400-4848-D-RG-S

Not for

Reproduction

Electrical Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988014

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

16

TP 400-4848-D-RG-S

Not for

Reproduction

Electrical Group

PART NO. DESCRIPTIONREF NO QTY.

Cable Clip, WSBH 1-0-1 52 1735882YP 7 Clip, Speed Wire 53 2834683SM 1 Plug, Shut-Off 54 1734025SM 1 Clip, Cable WCK 460 01/A 55 1735884YP 1 Socket Assembly 56 1723451SM 2 Bulb, 1141-12V 21CP 57 1677371SM 2 Reflector, Headlight 58 1728973SM 1 Lens, Headlight 59 1728974SM 1 Headlight Assembly (Includes References 56, 57, 58 & 59) 60 1727296SM 1 Key, Ignition (Set of 2) 61 1717163SM 1 Fuse 62 1731957SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

17

TP 400-4848-D-RG-S

Not for

Reproduction

Hood, Grille & Dash Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988018

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

18

TP 400-4848-D-RG-S

Not for

Reproduction

Hood, Grille & Dash Group

PART NO. DESCRIPTIONREF NO QTY.

Hood, With Louvers 1 1722110CSM 1 Duct, Air Inlet 2 1733457SM 1 Panel, Hood RH Side 3 1728029CSM 1 Panel,Hood LH Side 4 1728030CSM 1 Grille 5 1727297CSM 1 Hinge, Hood LH 6 1727279SM 1 CS, Hex LK ¼-20 x 0.625 7 1960295SM 12 Nut, Hex-Flange LK .25-20 8 1930641SM 12 Dashboard 9 1727293SM 1 Knob, Brake Lock 10 1728089SM 1 Knob, Cruise Lock 11 1728090SM 1 Nut, Push Pal .250 12 1960518SM 2 CS, Hex Tapit 5/16-18 x 0.75 13 1664847SM 2 Washer 0.312 14 1919381SM 2 Cover, Steering Shaft 15 1727999SM 1 Headlight Assembly 16 1727296SM 1 Screw, Phillips HD 18 1960392SM 3 Rod, Dash Support 19 1723123SM 1 Nut, Flange 20 1933896SM 3 Screw, Self-Tap 21 1925003SM 1 Guide, Hood LH 24 1732030SM 1 Guide, Hood RH 25 1732031SM 1 Braid, Steel Insert 0-9634-219 26 1735878YP 2 Hinge, Hood RH 27 1727280SM 1 Bumper, Front 28 1735879YP 1 Bolt M8 x 20 30 1735868YP 4 Washer 8.4 31 1735989YP 4 Washer 8 32 1736000YP 4 Nut M8 33 1735934YP 4 Ending Rubber 34 1731971SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

19

TP 400-4848-D-RG-S

Not for

Reproduction

Seat Deck & Fuel Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988021

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

20

TP 400-4848-D-RG-S

Not for

Reproduction

Seat Deck & Fuel Group

PART NO. DESCRIPTIONREF NO QTY.

Deck, Seat With Foot Rests 1 1727264CSM 1 Bolt 0.31-18 x 0.75 2 1931333SM 2 Pad, Footrest RH 4 1728007SM 1 Pad, Footrest LH 5 1728006SM 1 Tank, Fuel 9-2770-244 6 1735976YP 1 Cap, Fuel 7 1715917SM 1 Pod, LH Cup Holder 8 1729001SM 1 Seat, High Back 9 1730159SM 1 Spacer 10 1731300SM 4 Support, Seat 11 1727265SM 1 Latch, Seat 12 1727268SM 1 Screw, Flange, DOG PT, 5/16-18 x 1.0 13 1960667SM 4 Washer 0.312 14 1919381SM 4 Cover, Spring 15 1704724SM 2 Nut, Hex-Flange 5/16-18 16 1960686SM 6 Washer, Spring 17 1709256SM 4 Spring, Compression 18 1704728SM 2 Bolt, RD 5/16-18 x 0.75 19 1960282SM 2 Pivot, Seat 20 1727266SM 1 Bolt, Shoulder 5/16-18 x 1.15 22 1729576SM 2 Pod, RH Lift 23 1729000SM 1 Screw, Hex PLASTT 0.250 x 0.50 24 1960536SM 6 Bolt M8 x 16 25 1735854YP 2 Washer 8.4 26 1735989YP 4 Washer 8 27 1736000YP 4 Bolt M8 x 20 28 1735869YP 2 Nut M8 30 1735937YP 2 Distance, Lift 0-9521-289 31 1735894YP 1 Bolt M6 x 30 32 1735867YP 1 Nut M6 33 1735932YP 1 Braid, Steel Insert 0-9634-219 34 1735878YP 4 Hose, Air-Escape 1-9920-248 35 1735914YP 1 Clip, UM 5008 36 1735883YP 2 Washer 6.6 37 1735999YP 1 Screw, ST 5.5 x 19 38 1735961YP 2 Holder,Tank 39 1735912YP 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

21

TP 400-4848-D-RG-S

Not for

Reproduction

Mulching Flap Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988026

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

22

TP 400-4848-D-RG-S

Not for

Reproduction

Mulching Flap Group

PART NO. DESCRIPTIONREF NO QTY.

Flange, Mowing 9-8547-386 1 1736134YP 1 Tube 2 1736133YP 1 Holder 3 1736132YP 1 Full Tube 4 1736131YP 1 Handle 02/20-110-RED 5 1736130YP 1 Split Pin 0-9245-240 6 1736129YP 1 Screw M8 x 45 CSN021103.55 7 1736128YP 1 Nut M8 CSN021492.55 8 1736127YP 1 Screw M8 x 35 CSN021103.55 9 1736126YP 2 Washer 8 CSN021740.15 10 1736125YP 5 Nut M8 CSN021401.55 11 1736124YP 2 Spring TLZ200.180.0950 12 1736123YP 1 Casing 0-9311-816 13 1736122YP 2 Screw M8 x 12 CSN021103.25 14 1736121YP 3

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

23

TP 400-4848-D-RG-S

Not for

Reproduction

Lift Group - Manual

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988020

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

24

TP 400-4848-D-RG-S

Not for

Reproduction

Lift Group - Manual

PART NO. DESCRIPTIONREF NO QTY.

Mowing mechanism 1 1735923YP 1 Hinge, Front 2 1735902YP 1 Arm, Lift 3 1735848YP 1 Rod, Lift 4 1735958YP 1 Tie Rod, Lift 0-8040-311 5 1735979YP 2 Distance, Lift 0-9521-289 6 1735893YP 2 Pin 0-9016-463 7 1735945YP 2 Pin, Mowing 1-9310-417 8 1735947YP 2 Distance, Lift Hitch 0-9521-290 9 1735895YP 2 Stud 10 1735944YP 1 Spring 0-9746-460 11 1735825YP 1 Spring 0-9746-483 12 1735967YP 2 Handle, Extend, Left 13 1735898YP 1 Handle, Extend, Right 14 1735899YP 1 Rod, Lift -Change 15 1735956YP 1 Grip, Black 16 1722302SM 1 Washer 0.312 17 1960044SM 1 Rod, Lift .375 dia 18 1727954SM 1 Spring, TORS 19 1729652SM 1 Clevis, Lift 20 1728990SM 1 Space, Pivot 21 1727935SM 1 Pin, Hitch 22 1731414SM 1 Hanger, Front 23 1730221ASM 1 Decal, Height of Cut 24 1730264SM 1 Quadrant, Lift Height 25 1727985SM 1 Capscrew, HD 5/16-18 x 1.00 26 1921333SM 1 Capscrew, HD 5/16-18 x 0.62 TAP 27 1930601SM 2 Nut, Hex-Flange LK 5/16-18 28 1931277SM 1 Bolt-RD1/4-20 x 0.625 29 1960252SM 1 Nut, Hex-Flange, Whiz 1/4-20 30 1930641SM 1 Bushing 0-9462-202 31 1735881YP 2 Lock Ring 12 32 1735920YP 2 Pin, Flexible 0-9245-240 33 1735965YP 4 Clip, Pin Safety 34 2176012SM 1 Spindle 3.2 x 25 35 1735964YP 4 Bolt M12 x 25 36 1735856YP 4 Washer 13 37 1735993YP 4 Washer 12 38 1735992YP 4 Nut M12 39 1735927YP 8 Nut M10 40 1735925YP 4 V-Belt 17 x 1200 Li, BBT, ARAMID 42 1735986YP 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

25

TP 400-4848-D-RG-S

Not for

Reproduction

Wheels & Tires Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988024

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

26

TP 400-4848-D-RG-S

Not for

Reproduction

Wheels & Tires Group

PART NO. DESCRIPTIONREF NO QTY.

W & Tire 22 x 10 - 8 17 1732324SM 2 Wheel & Tire Assembly, Front, 14.4 x 6 18 1729708SM 2 Spacer, Axle, Rear PM Hunter 19 1730181SM 2 Key, Parallel PLN .187 x .187 x 3.0 STL 20 1713409SM 2 Cap, Hub 2.361 D GREY POLY 1.3H Viper 21 1722676SM 4 Washer, SPCL 0.7551D 2.562 0.6 THK YEL 22 1722717SM 4 Ring, Klipring EXT For .75 Dia Shaft blk 23 2827794SM 4 Washer 0.75 x 0.761D x 1.62D x 12 THK, Yel 24 1960160SM 8 Washer 0.75 25 2860202SM 2 Washer 0.75 26 1735988YP 8

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

27

TP 400-4848-D-RG-S

Not for

Reproduction

Decals Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988010

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

28

TP 400-4848-D-RG-S

Not for

Reproduction

Decals Group

PART NO. DESCRIPTIONREF NO QTY.

Decal, 22HP 1 1726944SM 1 Decal, 19.5HP 1 1735396YP 1 Decal Simplicity LH Stripe 2 1731390SM 1 Decal, Simplicity RH Stripe 3 1731391SM 1 Decal, Simplicity Steering Wheel 5 1731418SM 1 Decal, Tunnel 6 1734027SM 1 Decal, Fuel level 7 1735889YP 1 Decal, Trans/Tow Release Lever 8 1735265SM 1 Decal, Ignition Switch White/Blk 9 1722806SM 2 Decal, Noise 10 1735891YP 1 Decal, Safety 11 1735890YP 1 Decal, Regent XL RD 12 1735542YP 1 Decal, Mower Height 13 1730264SM 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

29

TP 400-4848-D-RG-S

Not for

Reproduction

Back Plate Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988006

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

30

TP 400-4848-D-RG-S

Not for

Reproduction

Back Plate Group

PART NO. DESCRIPTIONREF NO QTY.

Tunnel 1 1735985YP 1 Back Plate 2 1735849YP 1 Brace 3 1735876YP 1 Holder, Back Plate Left 4 1735906YP 1 Holder, Back Plate Right 5 1735907YP 1 Holder, Collector Right 6 1735908YP 1 Holder, Collector, Left 7 1735909YP 1 Hitch 8 1735903YP 1 Switch, Full Collector 9 1735975YP 1 Tie Rod, Bypass 0-8045-260 10 1735977YP 1 Tie Rod, Latch 11 1735978YP 1 Latch 12 1735915YP 1 Cover, Switch 13 1735887YP 1 Pad, Rubber 1-1332-332 14 1735939YP 1 Transition Part, Plastic 15 1735983YP 1 Spring, Collector, Lock 16 1735970YP 1 Holder, Adjustable, Right 17 1735904YP 1 Holder, Adjustable, Left 18 1735905YP 1 Screw, ST 5.5 x 19 DIN 7504-K BN1880 21 1735961YP 6 Screw, ST 4.2 x 9.5 DIN 7504-K BN1880 22 1735960YP 1 Bolt M12 x 30 23 1735857YP 4 Nut M12 24 1735927YP 4 Washer 13 25 1735993YP 4 Washer 12 26 1735992YP 4 Bolt M8 x 25 DIN 6921 8.8 27 1735871YP 10 Nut M8 28 1735934YP 12 Washer 8.4 29 1735989YP 19 Washer 8 30 1736000YP 12 Nut M8 32 1735935YP 7 Bolt M8 x 30 DIN 6921 8.8 33 1735872YP 2 Bolt M8 x 20 34 1735868YP 1 Bolt M5 x 16 35 1735860YP 2 Nut M5 36 1735930YP 2 Washer 5.3 37 1735997YP 2 Washer 5 38 1735996YP 2 Bolt M5 x 16 39 1735861YP 4 Nut M5 40 1735931YP 4 Bolt M6 x 16 41 1735865YP 1 Washer 6.4 42 1735998YP 1 Nut M6 43 1735933YP 1 Spindle 2 x 20 44 1735963YP 1 Bolt M4 x 16 45 1735858YP 1 Washer 4.3 46 1735995YP 2

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

31

TP 400-4848-D-RG-S

Not for

Reproduction

Back Plate Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988006

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

32

TP 400-4848-D-RG-S

Not for

Reproduction

Back Plate Group

PART NO. DESCRIPTIONREF NO QTY.

Nut M4 47 1735929YP 1 Pad, Packing 48 1736500YP 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

33

TP 400-4848-D-RG-S

Not for

Reproduction

Collector Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988007

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

34

TP 400-4848-D-RG-S

Not for

Reproduction

Collector Group

PART NO. DESCRIPTIONREF NO QTY.

Frame,Top 1 1735897YP 1 Tube, Front 2 1736463YP 1 Brace 3 1735877YP 1 Tube, Bottom 4 1735984YP 2 Tube, Connecting 5 1735953YP 1 Reinforcement Left 6 1736236YP 1 Reinforcement Right 7 1735954YP 1 Handle, Full 8 1735900YP 1 Coat, Fabric 9 1735885YP 1 Top, Collector 0-7447-260 10 1735982CYP 1 Lever, Dumping 11 1735916YP 1 Handle, Rubber RC/M 25 12 1735901YP 1 Bolt M5 x 12 13 1735859YP 1 Bolt M5 x 16 14 1735860YP 1 Plug, Plastic 15 1735948YP 6 Bolt M5 x 30 16 1735863YP 1 Bolt M5 x 35 17 1735864YP 2 Washer 10.5 18 1735990YP 2 Washer Lock 10 19 1735991YP 2 Nut M10 20 1735925YP 2 Bolt M8 x 20 21 1735868YP 2 Washer 8.4 22 1735989YP 2 Washer, Lock 8 23 1736000YP 2 Nut M8 24 1735934YP 2 Washer 5.3 25 1735997YP 2 Nut M5 26 1735931YP 14 Bolt M5 x 25 27 1735862YP 15 Spring, Flat 28 1735971YP 4 Reinforcement, Top 29 1735955YP 1 Screw 6.3 x 32 DIN 7504-K 31 1736416YP 1 Catcher Assembly (Includes Ref Nos: 1 - 31) -- 1737792YP 6

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

35

TP 400-4848-D-RG-S

Not for

Reproduction

40" Mower Deck - Belt & Idler Arm Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988004

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

36

TP 400-4848-D-RG-S

Not for

Reproduction

40" Mower Deck - Belt & Idler Arm Group

PART NO. DESCRIPTIONREF NO QTY.

COVER, Plastic 0-8547-369 24 1735802YP 1 MAIN BOARD 25 1735794YP 1 FOOTING, Complete 26 1735787YP 1 WASHER, Zinc 9 27.1 1735846YP 1 NUT, M8 27.2 1735799YP 2 PULLEY, Belt 28 Z 28 1735781YP 2 BEARING, 6203 2 RS C 66IB 29 1735779YP 2 RING, Safety 40 30 1735813YP 2 WASHER, 13 31.1 1735837YP 2 NUT, M12 31.2 1735796YP 4 WASHER 31.3 1735842YP 1 PULLEY, Belt 32 1735784YP 2 WASHER 0-9220-727 33.1 1735834YP 1 NUT, M12 33.2 1735796YP 1 REINFORCEMENT 34 1735804YP 1 REINFORCEMENT 35 1735805YP 1 SCREW, M8 x 25 36.1 1735818YP 1 NUT, M8 36.2 1735801YP 1 STUD 37.1 1735827YP 1 WASHER 37.2 1735841YP 1 SCREW, Zinc M8 x 20 38.1 1735843YP 2 WASHER, 13 38.2 1735837YP 2 WASHER, 8.4 38.3 1735839YP 2 NUT, M8 38.4 1735801YP 2 SCREW M8 x 40 39.1 1735820YP 6 NUT, M8 39.2 1735801YP 6 SCREW M6 x 20 40.1 1735816YP 2 WASHER, Zinc 6.6 40.2 1735844YP 6 BELT, Two Side Tooth K+K20DS 1760 41 1735832YP 1 V-BELT, 17 x 1200 Li, BBT, ARAMID 42 1735986YP 1 HOLDER, Complete 43 1735790YP 1 STUD, 0-9321-263 44 1735826YP 1 ROLLER, W 3500-3712 45 1735811YP 1 FOOTING 46 1735788YP 1 WASHER, Zinc 9 47.1 1735845YP 1 WASHER, 8 47.2 1735838YP 1 NUT, M8 47.3 1735799YP 1 NUT M8 47.4 1735800YP 2 SCREW, M8 x 20 10.9 ZN DIN 912 48.1 1735817YP 1 WASHER, 8 48.2 1735838YP 1 WASHER, 0-9221-222 48.3 1735836YP 1 PULLEY, Belt 9-3325-234, Complete 49 1735782YP 1 WASHER, 0-9220-727 50.1 1735834YP 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

37

TP 400-4848-D-RG-S

Not for

Reproduction

40" Mower Deck - Belt & Idler Arm Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988004

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

38

TP 400-4848-D-RG-S

Not for

Reproduction

40" Mower Deck - Belt & Idler Arm Group

PART NO. DESCRIPTIONREF NO QTY.

NUT, M12 50.2 1735796YP 1 SCREW, M 8 x 40 51.1 1735820YP 1 WASHER, 8 51.2 1735838YP 1 WASHER, 8.4 51.3 1735839YP 1 REINFORCEMENT 52 1735806YP 1 COVER, Pulley, Belt 0-8534-203 53 1735783YP 1 WASHER, Zinc 6.6 54.1 1735844YP 2 NUT, M6 54.2 1735798YP 2 SPRING, 0-9746-460 55 1735825YP 1

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

39

TP 400-4848-D-RG-S

Not for

Reproduction

40" Mower Deck - Housing, Hitch, Arbors & Blades Group

NOTE: Unless noted otherwise, use the standard hardware torque specification chart.

2988005

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

40

TP 400-4848-D-RG-S

Not for

Reproduction

40" Mower Deck - Housing, Hitch, Arbors & Blades Group

PART NO. DESCRIPTIONREF NO QTY.

COVER, Cutting Knife, Complete 1 1735888YP 1 HOUSING 2.1 1735791YP 2 REINFORCEMENT 2.2 1735807YP 2 BEARING 6205 2 RS C 66IB 3 1735780YP 4 SCREW M8 x 35 4.1 1735819YP 6 WASHER 8.4 4.2 1735839YP 6 NUT M8 4.3 1735801YP 6 SHAFT 5 1735823YP 1 TONGUE 6 H 9 x 6 x 30 6.1 1735830YP 1 TONGUE 6 H 9 x 6 x 25 6.2 1735829YP 2 SHAFT 7 1735822YP 1 TONGUE 6 H 9 x 6 x 63 8 1735831YP 1 RING, Safety 25 9 1735812YP 2 HOUSING 10 1735792YP 2 SHEAR STUD 0-9311-736 11 1735824YP 4 CUTTING KNIFE, Right Rotary 12 1735809YP 1 CUTTING KNIFE, Left Rotary 13 1735793YP 1 SCREW 0-9011-287 M10 14.1 1735815YP 1 WASHER 0-9220-749 14.2 1735835YP 2 WASHER BN 806-40 x 16.3 x 2 x 3.1 14.3 1735840YP 2 SCREW 0-9011-283 M10, Left Thread 15 1735814YP 1 QUICK FASTENER 0-9026-246 16.1 1735803YP 2 RING 13 x 2 NBR 16.2 1735810YP 2 NUT M12 16.3 1735797YP 2 CUTTING WHEEL, Right ETOP 100-8.2 17 1735808YP 4 SCREW M 8 x 90 18.1 1735821YP 4 NUT M8 18.2 1735801YP 4 HINGE, Front 19 1735902YP 1 STUD 20 1735944YP 1 PIN, Flexible 0-9245-240 21 1735965YP 4 MOWING STUD 1-9310-290 22 1735795YP 2 PIN, Flexible 0-9245-999 23 1735786YP 4

Footnotes

The above parts group applies to the following Mfg. Nos.:

2690782 - Regent RD 2690783 - Regent RD

2009

41

TP 400-4848-D-RG-S

Not for

Reproduction

Not for

Reproduction

Hardware Identification & Torque Specifications

No

Marks

0

1/4 3/4

1/2

21

1/4 3/4

1/2

1/4 3/4

1/2

1/4 3/4

1/2

4

Torque Specification Chart

FOR STANDARD METRIC MACHINE HARDWARE (Tolerance ± 20%)

Property Class

Size Of Hardware

M3 M4 M5 M6 7.3 10.3 12.1 M7 12.1 16.9 19.9 M8 17.7 M10 35 50 M12 61 86.2 103 140 M14 M16 147 210 250 340 M18 202 287 346 470 M20 290 405 486 660 M22 390 559 656 890 M24 497 M27 733 1032 1239 1680 M30 995 1401 1681 2280 M33 M36 1740 2441 M39 2249 3163

The guides and ruler furnished below are designed to help you select the appropriate hardware.

010

Nut, M8

Thread Diameter (mm)

Inside Diameter (in)

Nut, 1/2-16

Class 5.6

in/lbs

ft/lbs

5.88

13.44

26.4

44.64

5.2

7.7 15 26 42 64 89

126 169 217 320

435 590 759 988

20

5.6

Nm. Nm. Nm.

.56

1.28

2.50

4.3

7.1

10.5 21

36 58 88

121 171

230 295 435 590

800 1030 1340

30

8.8

Class 8.8

in/lbs

ft/lbs

13.44 1.80

30.72 43.44 52.56

60.96

Class 10.9

in/lbs

ft/lbs

19.2 22.92

1.28

2.90

5.97 7.15

5.75

9.9

16.5 24 48 83

101

136 162 220

132 200 275 390 530

708

375 995

1350

1349

1902 2278 3090

1830 2360 3050

50

60

Body Length

40

Screw, M8- 1.25 x 25

Thread Diameter (mm)

Threads per inch

Body Diameter

Screw, 1/2- 16 x 2

10.9

4.10

8.10 14 23

25

34

67 117 185 285 390 550 745 960

1400 1900 2580 3310 4290

80

Diameter

Distance between threads (mm)

Threads per inch

3

12.9

Class 12.9

in/lbs

ft/lbs

29 59

840 1140

2935 3980 3798

Body

Nm.

2.15

4.95

9.7

16.5 27 40 81

5150

90 10070

Body Length (mm)

Body Length (in)

Torque Specification Chart

FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%)

Hardware Grade

Size Of Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm.

8-32 8-36 10-24 10-32 1/4-20 1/4-28 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 29 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0

1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews.

2. Recommended seating torque values for locknuts:

a. for prevailing torque locknuts - use 65% of grade 5

b. for flange whizlock nuts and screws - use 135% of

3. Unless otherwise noted on assembly drawings, all torque values must meet this specification.

Common Hardware Types

Hex Head Capscrew

SAE Grade 2 SAE Grade 5 SAE Grade 8

in/lbs in/lbs

19 20 27 31 66 76

2.1

2.3

3.1

3.5

30 31 43 49

7.6 8 10.9 12 16.3

8.6 10 13.6 14 19.0

in/lbs

3.4

3.5

4.9

5.5

NOTES

torques.

grade 5 torques.

41 43 60 68

Washer

4.6

4.9

6.8

7.7

Standard Hardware Sizing

When a washer or nut is identified as 1/2” (M8), this is

Nominal size

the (8mm metric thread diameter); if a second number is present it represents the

When bolt or capscrew is identified as 1/2 - 16 x 2” (M8 - 1.25 x 50 ), this means the metric thread diameter), the second number,16, represents the

threads per inch, (1.25 thread diameter).

body length of the bolt or screw, 2 inches (50mm).

, meaning the

threads per inch

Nominal size

inside diameter

is 1/2 inch

(distance between threads).

, or body diameter is 1/2 inch (8mm

The final number is the

Lockwasher

Carriage Bolt

Hex Nut

Wrench & Fastener Size Guide

1/4” Bolt or Nut

Wrench—7/16”

M6 Bolt or Nut

Wrench—10mm

5/16” Bolt or Nut

Wrench—1/2”

M8 Bolt or Nut

Wrench—13mm

3/8” Bolt or Nut

Wrench—9/16”

M10 Bolt or Nut

Wrench—17mm

7/16” Bolt or Nut

Wrench (Bolt)—5/8” Wrench (Nut)—11/16”

M12 Bolt or Nut

Wrench—19mm

1/2” Bolt or Nut

Wrench—3/4”

M14 Bolt or Nut

Wrench—22 mm

Not for

Reproduction

IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS

WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO

MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY

OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS.

Briggs & Stratton Yard Power Products Group

3515 N. 124 Street / PO Box 702 Wauwatosa, WI 53222 USA

www.simplicitymfg.com

2009

Simplicity 2690783, 2690782, RD User Manual

Specifications and Main Features

Frequently Asked Questions

User Manual