SIM2 HT300 LINK Product Sheet

Headquarters:
SIM2 MULTIMEDIA S.p.A.

Viale Lino Zanussi, 11
33170 Pordenone - Italy
Tel. [phone]
Telefax +39.0434.383260
E-mail: [e-mail]
Web site: www.sim2.com

USA:
SIM2 SELECO USA INC.

10108 USA Today Way
Miramar, FL 33025
Tel. [phone]
Telefax [phone]
E-mail: [e-mail]
Web site: www.sim2usa.com

UK:
SIM2 UK Ltd.

Steinway House, Worth Farm
Little Horsted
Nr. Uckfield
East Sussex TN22 5TT
Tel. [phone]
Telefax +44.01825.750851
E-mail: [e-mail]
Web site: www.sim2.co.uk

HT300 LINK

Germany:
SIM2 DEUTSCHLAND GmbH

Gewerbepark, 17
D - 35606 Solms
Tel. [phone]
Telefax +49.(0)800.900.7462
E-mail: [e-mail]
Web site: www.sim2.com

SIM2 Multimedia is certified

HT300 LINK

HT300 LINK

optical freedom

The HT300 LINK is the latest and most innovative projector of the acclaimed and successful Grand Cinema HT line, featuring the

revolutionary SIM2's DigiOptic

the projector through a thin fiber optic cable (3,5mm - 0,14" diameter). With this innovative feature of using an external

input/image processing box connected via fiber optics to the projector, SIM2 has made installation and signal management an

easy task. Video sources are typically located far away from the projector and it is becoming very difficult to run HD-compatible

cables for long distances. With the HT300 LINK this issue no longer exists. Based on a Complementary Metal Oxide

Semiconductor (CMOS) chip-set the optical link allows a fully digital source-to-display link, which is capable of transmitting data

over a distance in excess of 1600 ft, with 3 high-speed lasers between the DigiOptic

loss-free and interference-free signal. Thanks to the new digital inputs on the DigiOptic

DVI (or 1394 Firewire as an alternative) - the HT300 LINK is a truly future-proof projector that allows complete digital connectivity

to an increasing amount of video sources. The software and light engine have been further improved, enabling the HT300 LINK

to deliver both an impressive and outstanding contrast. This improvement coupled with Texas Instruments new HD2+ chip, gives

the HT300 LINK a contrast of 2800:1, resulting in a phenomenal image quality. Also, the HT300 LINK will have a brightness burst

function which increases brightness up to 15% without loss in contrast or black level, as well as new OSD features (memory list,

label entry, programmable RC, etc.).

key points

• The first and only with FIBER OPTIC connection

• External DigiOptic™ Image processor with

12 inputs

• Fiber optic cable link up to 1600 ft

• Proprietary optical engine design (sealed)

• Native 16:9 DMD chip (1280x720 pixels)

• Future-proof digital inputs (including HDMI

• DVI or 1394 Firewire input

• True contrast ratio >2800:1

• New, silent 6-segment color wheel

• Built-in DCDi™ deinterlacer and

video enhancement

TM

Image Processor, the remote processor box equipped with a wide choice of inputs and linked to

TM

Image Processor and the projector for a

TM

Image Processor - HDMITM-HDCP and

TM

-HDCP)

technical specifications

Light engine

• DLP™ Type: Proprietary sealed optical engine based on 1 DMD
(HD2+ chip). Sealed housing

• Resolution: True 16:9 (1280 x 720 pixels)

• Lens: High quality, high resolution improved optics for higher
contrast and better black level with both motorized zoom and
focus adjustments

• Throw ratio: 1.8 – 2.4:1 (16:9 mode)

• Lamp power consumption & life time: 120W UHP; 8000 hours (*)

Installation

• Optical keystone adjustment: +/- 8° lens shift

• Digital keystone adjustment: +/-13° vertical, +/-10° horizontal

• Picture size: 50-300 inches diagonal

• Aspect ratio: 4:3, 16:9, Anamorphic, Letterbox, 3 custom-user
(H&V) adjustments, panoramic and pixel-to-pixel

Electronics

• Horizontal & vertical scan freq.: 15-80 KHz / 48-100 Hz (max
horizontal freq. corresponding to UXGA, 60 Hz)

• Video standards and graphic resolutions: PAL B,G, H, I, M, N, 60,
SECAM, NTSC 3.58 & 4.43 automatically selected; HTDT ATSC
(480p, 720p, 1080i) PC graphic standard up to UXGA (1600 x
1200 pixels).

• Deinterlacer & processing: On-board DCDi™ by Faroudja. 3:2 pull­down sequencing automatically detected

• Contrast ratio (full On / full Off): >2800:1

• Color temperature: 3 preset color temperatures + a RC user
adjustment acting directly on each color (R, G, B)

• Special video adjustments: noise reduction, fleshtone regulation,
Y/C delay

General Specifications

• Control: control software upgradable via RS232 serial interface

• Power Consumption: 180W

• Mains voltage range: 120-240 Vac, +/- 10% (48/62Hz)

TM

• Weight: 12.8 lb (5.8 Kg)

• Cabinet dimension (WxHxD): 13.8” x 6.8” x 12.5” (350 x 173 x
318 mm )

DigiOpticTMImage Processor: Inputs/Outputs

• 2 x composite video via RCA connectors

• 2 x S-VHS via mini Din-4 pin

• 1 x RGB via DB15 HD connector

• 3 x RGBH/V YCrCbH/V via RCA connectors

• 1 x RGBH/V YCrCbH/V via 5 BNC connectors

• 1 x RS232 on Dsub 9 pin connector

• 1 x HDMI

• 1 x optical S/PDIF audio output from HDMI

• 1 x DVI via DVI-D connector

• 1 x 1394 Firewire (optional to DVI - AVC protocol compliant)

• 3 fiber optics links via RJ-45 type LC connectors

• 2 x jack 12V power output, active when the projector is ON

TM

-HDCP

TM

Supplied Accessories

DigiOpticTMImage Processor, fiber optic cable, backlit Remote
control, AC power cords (EU, UK, and USA); length 6.5 ft (2 m);
installation and user manual

Cabinet colors

Standard: Gun Metal,
Optional: Shiny Silver, Royal Burgundy

(*) Lamp life: the hours quoted have

been calculated under strict test
conditions. Misuse or improper use
may alter it.