SilverStone SST-RA03B User Manual

有毒有害物质/元素及其化学含量表

○

○

多溴联苯

(PBB)

○

○

部件名称

把手

左右档板

○：表示该有毒有害物质在该部件所有均质材料中的含量均在
SJ/T11364-2014标准规定的限量要求以下。
×：表示该有毒有害物质在该部件材料中的含量超出
SJ/T11364-2014标准规定的限量要求。

本表中有×的部件均符合欧盟RoHS法规，即欧盟第
2011/65/EU号指令要求。

Warranty Information

This product has a limited 1 year warranty in North America and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.

Warranty terms & conditions

1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.

5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
Please visit http://www.silverstonetek.com for the latest updates.

Additional info & contacts

For North America ([e-mail])
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent
back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology
in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions.

http://silverstonetek.com/contactus.php
For Australia only ([e-mail])

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)

For Europe ([e-mail])
For all other regions ([e-mail])

铅

(Pb)

○

○

汞

(Hg)

○

○

镉

(Cd)

○

○

六价铬

(Cr(VI))

多溴二苯醚

(PBDE)

○

○

产品合格证

检验员：检01
生产日期：见产品条码

NO:G11230070

High quality auto lock handle for
2U rackmount chassis

RA03

Auto lock handle for convenient fixation
of 2U rackmount to cabinet
Pre-drilled Mounting holes ready for quick installation
Helps save management time and cost with screw-less design
Ergonomically designed handle

Introduction

The RA03 is a durable rackmount handle kit for SilverStone cases that are rackmount ready. It is
equipped with pre-drilled mounting holes for easy attachment and its simple auto lock allows IT
managers to quickly secure the cabinet without using screws, thus helping to streamline server room
management. The RA03 also has ergonomic handle design that makes pushing and pulling attached
chassis effortless, making this high quality rackmount kit an unbeatable finishing touch for any
rackmount setup!

Specifications

Model No.
Material
Color
Supported chassis form factor
Supported rackmount chassis model
Net Weight
Dimension

* Please make sure your chassis screw hole is suitable for RA03.

SST-RA03B
Aluminum, SGCC
Black handle, bare metal colored bracket
2U
SST-RM202, SST-RM204, SST-RM208,SST-RM208-MINI

0.16kg

87.5mm (W) x 23mm (H) x 51.5mm (D)

www.silverstonetek.com

Screw hole dimension

1. SST-RM202, SST-RM204

2. SST-RM208, SST-RM208-MINI

23mm

2mm

2

1

17mm

51.5mm

6.5mm

12.5mm

Installation guide

01

Remove the existing handles from your chassis

12mm

44.5mm

67mm

23mm

44.5mm

67mm

6.5mm

12mm

17mm

51.5mm

12.5mm

2mm

2

1

Удалите существующие ручки с вашего корпуса

03

Installation complete

Damit ist die Installation abgeschlossen

Le montage est terminé

Instalación completa

L'installazione è completata

95 ~ 10mm

95 ~ 10mm

Установка завершена

安裝完成

安装完成

インストール完了

설치가 완료되었습니다

95 ~ 10mm

Entfernen Sie die vorhandenen Griffe von Ihrem Gehäuse

Retirez les poignées existantes de votre châssis

Retire las asas existentes de su chasis

Rimuovere le impugnature esistenti dallo chassis

02

Use screws from your chassis to secure
the RA03 to your chassis

Befestigen Sie das RA03 mit den dem Gehäuse
zugehörigen Schrauben an Ihrem Gehäuse

Utilisez les vis de votre châssis pour fixer
le RA03 à votre châssis

Use tornillos de su chasis para fijar el RA03
a su chasis

Utilizzare le viti dello chassis per fissare
RA03 allo chassis

從機殼中卸下現有把手

从机箱中卸下现有把手

ケースから既設のハンドルを取り外します

기존 핸들을 섀시에서 떼어냅니다

Используйте винты от вашего корпуса,
чтобы закрепить RA03

用您機殼原本的螺絲將RA03鎖在機殼上

用您机箱原本的螺丝将RA03锁在机箱上

ケースからのネジで、RA03をケースに固定します

섀시의 나사를 이용해서 RA03을 섀시에
고정합니다

Hole size applicable range：
(1) Square holes：Unilateral length 9.5 ~ 10mm
(2) Circular holes：Diameter 9.5 ~ 10mm

Anwendungsbereich je nach Lochgröße：
(1) Rechteckiges Loch Aluminiumstütze：einseitige
Länge 9,5 ~ 10 mm
(2) kreisrundes Loch Aluminiumstütze：Durchmesser
9,5 ~ 10 mm

Champ d'application de la taille des pores：
(1) Colonne en aluminium à pore carré：Longueur
unilatérale de 9,5 à 10 mm
(2) Colonne en aluminium à pore circulaire：Diamètre
de 9,5 à 10 mm

Ámbito de aplicación del tamaño de los poros：
(1) Poro cuadrado columna de aluminio：Longitud
unilateral 9,5 ~ 10mm
(2) Poro circular columna de aluminio：Diámetro
9,5 ~ 10mm

Campo di applicazione dimensioni pori：
(1) Colonna in alluminio pori quadrati：Lunghezza
unilaterale 9,5 ~ 10 mm
(2) Colonna in alluminio pori circolari：Diametro
9,5 ~ 10 mm

Размер отверстий для крепления：
(1) Квадратные отверстия алюминиевой колонны：
Односторонняя длина 9,5 ~ 10 мм
(2) Круглые отверстия алюминиевой колонны：
Диаметр 9,5 ~ 10 мм

孔徑適用範圍：
(1) 方孔：單邊長度9.5 ~ 10mm
(2) 圓孔：直徑9.5 ~ 10mm

孔径适用范围：
(1) 方孔：单边长度9.5 ~ 10mm
(2) 圆孔：直径9.5 ~ 10mm

適用可能な穴の範囲：
(1) 方形穴アルミニウム支柱：片側長さ

9.5 ~ 10mm
(2) 円形穴アルミニウム支柱：直径9.5 ~ 10mm

적용 구멍 크기：
(1) 사각형 구멍 알루니뮴 기둥：일방 길이

9.5 ~ 10mm
(2) 원형 구멍 알루미늄 기둥：직경 9.5 ~ 10mm