SilverStone SST-PS13B User Manual

PS13

有毒有害物质/元素及其化学含量表

部件名称

机壳

（金属）

机壳

（塑胶）

风扇

电子卡

线材

铅

(Pb)

○

○

○

○

○

汞

(Hg)

○

○

○

○

○

镉

(Cd)

○

○

○

○

○

六价铬

(Cr(VI))

○

○

○

○

○

多溴联苯

(PBB)

○

○

○

○

○

多溴二苯醚

(PBDE)

○

○

○

○

○

○：表示该有毒有害物质

在该部件所有均质材料中

的含量均在SJ/T11364-2014

标准规定的限量要求以下。

×：表示该有毒有害物质

在该部件材料中的含量超

出SJ/T11364-2014标准规定

的限量要求。

本表中有×的部件均符合
欧盟RoHS法规，即欧盟第
2011/65/EU号指令要求。

Affordable, simple, and great performing ATX tower chassis

螺丝

包材

Warranty Information

This product has a limited 1 year warranty in North America and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.

○

○

○

○

○

○

○

○

○

○

○

○

产品合格证

检验员：检01
生产日期：见产品条码

Warranty terms & conditions

1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.

5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
Please visit http://www.silverstonetek.com for the latest updates.

Additional info & contacts

For North America ([e-mail])
SilverStone T echnology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent
back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology
in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions.

http://silverstonetek.com/contactus.php

For Australia only ([e-mail])

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)

For Europe ([e-mail])
For all other regions ([e-mail])

NO: G11225551

PS13

Quick access filters for easy cleaning
Motherboard back plate opening for quick CPU cooler assembly
All black painted interior for stylish look
Supports graphics cards up to 13.7 inches
Highly flexible drive storage options

Specifications

Model No.
Material
Motherboard
Drive Bay

Cooling System

Expansion Slot
Front I/O Port
Power Supply
Expansion Card
CPU cooler Limit
PSU Limit
Dimension

*Depending on installed drives

PICTURE ITEM PURPOSE

SST-PS13B (black), SST-PS13B-W (black + window)
Plastic panel, steel body
ATX (up to 12" x 11") , Micro ATX
External

5.25" x 2, 3.5" x 1

Internal

3.5" x 1, 2.5" or 3.5" HDD x 2

Front

120mm fan slot x 2 (included 120mm fan x 1)

Rear

120mm fan slot x 1

Bottom

120mm fan slot x 1

Side

120mm fan slot x 2 (SST-PS13B only)
7
USB 3.0 x 2, audio x 1, MIC x 1
Standard PS2 (ATX)
Support up to 13.7", width restriction* - 4.92”~5.91"
157mm (none window), 153mm (window)
174mm
182mm (W) x 426mm (H) x 400mm (D) , 31 liters

7.17" (W) x 16.77" (H) x 15.75" (D) , 31 liters

SCREW A #6-32 X4

SCREW B M3 X4 SECURE 2.5” HDD

SCREW C #6-32 X5

SCREW SLEEVE

PACKAGE

MANUAL

MOTHERBOARD STANDOFF

SECURE PSU, MB, 3.5” HDD

SECURE STANDOFF

PSU (OPTION)

120MM FAN SLOT X1

ATX MB (OPTION)

120MM FAN SLOT X2
LEFT-SIDE-PANEL

RIGHT-SIDE-PANEL

5.25” DRIVE BAY X2

3.25” DRIVE BAY X1
POWER BUTTON
RESET BUTTON
USB 3.0 X2 + SPK + MIC

2.5” OR 3.5” HDD X2
120MM FAN SLOT X1

120MM FAN SLOT X2
(INCLUDED 120MM FAN X1)

3.5” & 5.25” Front Bay Device Installation

(2) Power supply limitation

1

Remove front panel as indicated in the diagram

Frontblende wie abgebildet entfernen

Retirez le panneau frontal comme indiqué dans le diagramme

Retire el panel frontal como se indica en el diagrama

Rimuovere il pannello frontale come indicato nella figura

Снимите лицевую панель, как показано на рисунке

請依圖示由面板正面取下擋版

図示されるようにフロントパネ ルを取り外します

그림과 같이 전면 패널을 분리합니다

请依图示由面板正面取下挡版

2

Secure with screws from both side

Mit Schrauben von beiden Seiten sichern

Fixez avec des vis de chaque côté

Asegure con tornillos desde ambos lados

Fissare con viti su entrambi i lati

Закрепите винтами с обеих сторон

於兩側鎖上螺絲固定

ネジで両側を固定します

양쪽 나사로 고정합니다

于两侧锁上螺丝固定

2.5” / 3.5” Disk Device Installation

Install and secure the 2.5” / 3.5” hard drive onto the hard drive bracket

Installieren und fixieren Sie die 2.5 / 3,5 Zoll-Festplatte in der
Festplattenhalterung

Installez et fixez le disque dur de 2.5” / 3,5”sur la console du disque dur

Instale y fije el disco duro de 2.5” / 3,5” al bracket para discos duros

Installare e fissare il disco rigido da 2.5” / 3,5” al relativo supporto

Установите на кронштейн и закрепите 2.5 / 3,5-дюймовый
жесткий диск

將2.5” / 3.5”硬碟安裝至硬碟架。

2.5” / 3.5”ハードディスクドライブをハー ドディスク・ブラ
ケットにインストー ルして固定します

2.5” / 3.5" 드라이브를 하드 드라이브 브래킷에 장착하고
고정합니다

将2.5” / 3.5”硬盘安装至硬盘架

Component size limitations

The PS13 was designed to accommodate oversized components, but we still recommend referring to the following dimension guidelines:

(1) CPU Cooler limitation

4MM

The PS13 supports power supply with depth of up to 174mm.

Das PS13 unterstützt Netzteile mit einer Tiefe von bis zu 174 mm.

Le PS13 est compatible avec les alimentations d'une profondeur inférieure ou égale à
174mm.

La PS13 acepta fuentes de alimentación con una profundidad de hasta 174mm.

PS13 supporta alimentatori con profondità fino a 174mm.

(3) Graphics card / expansion card length limitation

174.50

30,00

Корпус PS13 допускает установку блока питания глубиной до 174 мм.

PS13的PSU可用總空間有174mm

PS13は最高174mmの奥行きの電源をサポートします。

PS13은 174mm의 깊이를 갖는 파워 서플라이까지 지원합니다.

PS13的PSU可用总空间有174mm

153MM

9MM

7MM

Height limitation for CPU cooler is 157mm(none window) / 153mm(window) with 7mm
clearance over the motherboard’s top edge.

Höhenbeschränkung für CPU-Kühler beträgt 157 mm (kein Fenster) / 153 mm (Fenster)
mit einem Freiraum von 7 mm oberhalb der Motherboard-Oberkante.

La limitation en hauteur des refroidisseurs de processeurs est de 157 mm (sans fenêtre) /
153 mm (fenêtre) avec un espace de 7 mm au-dessus du bord supérieur de la carte mère.

La limitación de altura para el disipador de la CPU es de 157mm(sin ventana)/ 153mm
(ventana) con un espacio de 7mm sobre el borde superior de la placa base.

La limitazione dell’altezza del dissipatore di calore CPU è di 157 mm (senza finestra) /
153 mm (con finestra) con uno spazio libero di 7 mm sopra il bordo superiore della
scheda madre.

Ограничение на высоту процессорных кулеров составляет 157 мм (без окна) и
153 мм (с окном).

Cooler限高是157mm(無開窗版)/153mm(側透窗版)，Cooler外源允許超出主機板上邊界7mm

CPUクーラー高さ限度は、マザーボード上端に7mmの余裕を見た上で157mm(ウィンドウなし)/
153mm(ウィンドウ付き) です。

CPU 쿨러의 높이 제한은 157mm(창 없음)/153mm(창)이며, 메인보드 상단 가장자리 위의
간격이 7mm입니다.

Cooler限高是157mm(无开窗版)/153mm(侧透窗版)，Cooler外源允许超出主板上边界7mm

151.45MM

141.95MM

126.05MM

PS13 can support expansion/graphics card up to 13.7 inches (349mm), which should
apply to nearly all retail or consumer cards. There is width restriction of 4.92 inches
(125mm) to 5.91 inches (150mm) depending on the thickness of the drives installed
on the side plate.

PS13 kann eine Erweiterungs-/Grafikkarte bis 349 mm unterstützen, womit nahezu
alle im Einzelhandel erhältlichen Karten abgedeckt sind. Es gibt je nach Dicke der an
der seitlichen Blende installierten Laufwerke eine Breitenbeschränkung von 125 bis
150 mm.

Le PS13 peut prendre en charge une carte graphique/d'extension jusqu'à 13,7 pouces
(349 mm), ce qui doit correspondre à quasiment toutes les cartes au détail ou grand
public. Il existe une restriction de largeur de 4,92 pouces (125 mm) à 5,91 pouces
(150 mm) en fonction de l'épaisseur des disques installés sur la plaque latérale.

La PS13 puede aceptar tarjetas gráficas/de expansión de hasta 13,7 pulgadas (349mm),
que deberían aplicarse a casi todas las tarjetas existentes. Existe una restricción de
anchura desde 4,92 pulgadas (125mm) hasta 5,91 pulgadas (150mm) dependiendo del
grosor de los dispositivos instalados en la placa lateral.

PS13 supporta schede d'espansione/grafiche lunghe fino a 13,7 pollici (349 mm),
lunghezza che dovrebbe applicarsi a quasi tutte le schede di vendita al dettaglio e di
largo consumo. C'è una limitazione della larghezza da 4,92 pollici (125 mm) a 5,91 pollici
(150 mm) in base allo spessore delle unità installate sulla piastra laterale.

349.5MM

PS13 поддерживает установку карты расширения/графической карты длиной до
349 мм, то есть практически любой доступной в продаже карты. Ограничение по

ширине составляет от 125 до 150 мм, в зависимости от толщины дисков, установленных
на боковой панели.

PS13支援13.7吋(349mm)長度顯示卡，市面上零售的消費及顯示卡應該都能安裝，顯示卡寬
度最大限制介於4.92吋(125mm)~5.91吋(150mm)之間，依側邊安裝的硬碟厚度而定

PS13が対応するのは、最大13.7インチ(349mm)の拡張/グラフィックスカードで、ほぼ全て
のリテールまたはコンシューマーカードが適用されます。幅には、側面パネルに装着され
たドライブの厚さに依存して4.92インチ(125mm)から5.91インチの制約があります。

PS13은 최대 13.7인치 (349mm) 의 확장/그래픽 카드를 지원할 수 있으며, 이는 거의 모든
소매 판매용 및 소비자용 그래픽 카드에 적용됩니다. 측면 플레이트에 설치되어 있는
드라이브의 두께에 따라 4.92인치 (125mm) 에서 5.91인치 (150mm) 까지 폭이 제한됩니다.

PS13支持13.7吋(349mm)长度显示卡，市面上零售的消费及显示卡应该都能安装，显示卡宽
度最大限制介于4.92吋(125mm)~5.91吋(150mm)之间，依侧边安装的硬盘厚度而定