SilverStone SST-LS02 User Manual

Introduction

LED strip is a must have for any enthusiast looking to brighten up their PCs. Improving upon
SilverStone’s first light strip product, the LS01, the LS02 has three more LEDs for a total of
18 for extra brightness. By injecting the clear coating with special light diffusion material, it
disperses its colors smoother and with better uniformity. LS02 can be controlled by hardware
or software that can manipulate +12V, G, R, B, signals such as RGB LED control box or
motherboard to display user’s desired colors. It also has the ability to daisy chain multiple
light strips to accommodate various applications. Finally, to improve ease of installation and
replacement, the LS02 has both built-in magnetic strip and adhesive tape to better meet the
demand of enthusiasts that require more flexibility in installation.

Special Features

Displays any color by use of a RGB LED control box or capable motherboard
Coating with special light diffusion material improves light uniformity
Built-in magnetic strip and adhesive tape provides more installation freedom
Supports daisy chaining multiple light strips

Specifications

Model No.
Material
Pin definition
Included Parts

Watt
Tandem limits
Length
Weight

* Please check the control box and motherboard pin header that you want to connect are the same as LS02’s pin definition.
** Included Y cables support SilverStone’s RGB 4pin connectors and other market standard RGB 4pin connectors.

SST-LS02
18 pcs 5050 RGB LED with magnetic strip and adhesive tape
+12V, G, R, B*
RGB LED strip x 2
Y cable x 2**

1.44W (12V, 0.12A)
5 pcs on each line
300mm
30g

Installation

01

Use the magnetic stripe on the back or the
adhesive strip to affix LS02 to the location you
wish to install

Use the magnetic stripe on the back or the
adhesive strip to affix LS02 to the location you
wish to install

Befestigen Sie den LS02 mit dem rückseitigen
Magnetstreifen oder dem Klebeband an der
gewünschten Position

Use la cinta magnética en la parte posterior ó la
cinta adhesiva para fijar la LS02 al lugar donde
desee instalarla

Utilizzare la striscia magnetica sul retro o la
striscia adesiva per fissare LS02 sul punto di
installazione

Для установки LS02 в корпус или на другие
поверхности используйте магнитную или клейкую
полосы на задней стороне светодиодной ленты

利用背面磁條或是背膠將燈條固定於所欲
安裝的位置

利用背面磁条或是背胶将灯条固定于所欲
安装的位置

背面のマグネットストリップまたは粘着テー
プを使用して、LS02インストールしたい箇所
へ固定します

뒷면의 자석 스트립이나 접착 테이프를
사용하여 LS02를 설치하려는 위치에
부착하십시오