Silverstone SST-LC13 User Manual

Product Overview

Aluminum front

pan

el,

1.0mm SECC bod

SST-LC13

T-LC1

Specification:

cification:

Material: Aluminum front panel, 1.0mm SECC body

terial: Color: Black & Silver Motherboard: Drive Bay: External - 5.25" x 2 / 3.5" x 2 Internal - 3.5" x 2 Cooling System: Front - 92mm intake, 2100rpm, 21dBA Rear - 2 x 60mm exhaust, 3000rpm, 25dBA Expansion Slot: 7 Front I/O Port: Power Supply: Optional standard PS2 (ATX) Net Weight: 9 kg Dimension: 430 mm (W) x 163 mm (H) x 430 mm (D)

Extended ATX*, A TX, Micro A TX

USB2.0 x 2, IEEE1394 x 1, audio x 1, MIC x 1

ation

LC13

* LC13 has mounting holes for extended ATX motherboards, but it does not fully support all available extended ATX motherboards on the market. The use of extended ATX motherboard will also require the removal of 3.5" drive bay

Disassemble Chart

STANDARD ATX M/B

9225 FAN

TOP PANEL

6025 FAN * 2

PS2 POWER SUPPLY

3.5 BAY * 1 ( HIDDEN )

5.25 BAY * 2

DOOR FRONT IO (USB * 2+1394 + AUDIO)

5.25 BAY * 2

3.5 BAY * 1 (HIDDEN)

3.5 BAY * 2

POWER SW

February , 2005

NO:11400110

1. Unscrew four case screws to remove case cover

2. Check for included accessories (screw bag, 3pin to 4pin adapater, and EMI wire ring)

3. Power Supply Installation- Insert power supply into the case, secure with four #6-32 x 6 screws

4. Motherboard Installation- Insert included motherboard standoffs into holes on the bottom of the case that will lineup with your motherboard

5. Place motherboard into the case and secure with screws

6. Hard Drive and 3.5" bay Installation Remove 3.5" drive bracket from the case

7. Remove front 3.5" drive bay covers as needed depending on how many external

3.5" drive bay device is required

13. Line up optical drive with the front panel and secure it with screws

8. Use #6-32 x 6 screws to install hard drive into the 3.5" drive bracket

14. After optical drives are installed, place the 3.5" drive bracket back into the case and secure with screws

9. Install floppy drive or other 3.5" drive bay device into the drive bracket. Use the drive bay cover as a guide for lining up the drive or installed device

15. A second 3.5" drive bracket is located beneath the 5.25" drive bays with room for one more hard drive. It can be taken out of the case easily with a screw removed

10. If one of the external 3.5" drive bay isn't used, the extra space can be used for an additional hard drive

16. After installing hard drive into the bracket, slide it back underneath the 5.25" drive bays

11. Optical drive installation- Remove screws holding the 5.25" drive bay cover

17. Secure reinstalled bracket with screw 18. For extra EMI protection, route front panel

12. Insert optical drive into the 5.25" drive bay from the front of the case

cables through the included wire ring

19. Use included 3pin to 4pin adapter to connect a case fan if your motherboard does not support enough 3pin fan headers

20. After installing all other system components, place the case cover back onto the case and secure with screws to complete installation