SilverStone SST-KL07B User Manual

07

(5) Front Panel Fan Slot Limitation

20mm

High quality ATX tower chassis with silent designs and elegant styling

A decorative plate from the PSU/drive cover must be removed for 140mm fan
installation on the bottom most fan slot.

Zur Installation eines 140-mm-Lüfters im untersten Lüftersteckplatz muss die
dekorative Platte der Netzteil-/Laufwerkabdeckung entfernt werden.

Le cache alimentation / disque décoratif doit être retiré pour l'installation du
ventilateur de 140mm sur l'emplacement du fond.

Una placa decorativa de la cubierta para FA/dispositivos debe ser retirada para
la instalación del ventilador de 140mm en el zócalo para ventiladores abajo del todo.

È necessario rimuovere una piastra decorativa del coperchio PSU/unità per
l'installazione di ventole da 140 mm sull'alloggio ventola più in basso.

Warranty Information

This product has a limited 1 year warranty in North America and Australia.
For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.

Warranty terms & conditions

1. Product component defects or damages resulted from defective production is covered under warranty.
Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.
a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.
b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)
c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.
d) Warranty mark/stickers are not removed or broken.
Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding
shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone
Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of
profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,
contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand
purchaser.

5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone
http://www.silverstonetek.com.
Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping
(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping
(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a
Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.
Please visit http://www.silverstonetek.com for the latest updates.

Additional info & contacts

For North America ([e-mail])
SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.
Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent
back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology
in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions.

http://silverstonetek.com/contactus.php
For Australia only ([e-mail])

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.
You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.
You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
Please refer to above “Warranty terms & conditions” for further warranty details.
SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238
(standard international call charges apply)

For Europe ([e-mail])
For all other regions ([e-mail])

При установке 140 мм вентилятора на нижнюю часть корпуса следует убрать
декоративную пластину прикрывающую блок питания и накопители.

若欲安裝140mm風扇於前板底部的風扇位置,則需移除裝飾蓋板。

若欲安装140mm风扇于前板底部的风扇位置,则需移除装饰盖板。

40mmファンを底部ファンスロットに装着するには、PSU/ドライブカバーから
飾りプレートを取り外します。

140mm 팬을 맨 아래 팬 슬롯에 설치할 경우 PSU/드라이브 커버에서 장식
플레이트를 제거해야 합니다.

NO:G11227250

KL

Special Features

Special wavy foam padded for noise absorption
Super clean internal look with PSU and drive bay cover
Includes front mounted USB 3.0 Type-C port
Smart backside cable routing design
Motherboard back plate opening for quick CPU cooler assembly
Includes two 140mm fans designed to generate positive pressure
Supports graphics cards up to 15.3 inches

ATX MB (OPTION)

LEFT-SIDE-PANEL

USB 3.0 X2 + C type X1
+ SPK + MIC

POWER BUTTON
RESET BUTTON

LEFT-SIDE-PANEL

2.5” HDD X1

2.5” HDD X1

2.5” HDD X1

PSU (OPTION)

2.5” OR 3.5” HDD X3

Specifications

Model No.
Material
Motherboard
Drive Bay

Cooling System

Expansion Slot
Front I/O Port
Power Supply
Expansion Card
Limitation of CPU cooler
Limitation of PSU
Dimension

* SuperSpeed USB (USB 3.1) requires total cable length to be 1 meter (1000mm) or shorter. So we recommend using external USB Type-C cable with length
of 400mm or less due to KL07’s internal USB Type-C cable already taking up 600mm of the total length requirement.
** 163mm is from CPU’s top surface to wavy foam pad’s surface.
*** Depend on drive cage’s position

SST-KL07B (black)
Plastic front panel, steel body
ATX ( up to 12" x 11") , Micro ATX
Exposed
Internal
Front
Rear
Top
7

None

3.5" x 3 (compatible with 2.5") , 2.5" x 3
3 x 120/140mm fan slot (2 x 140mm intake fan included)
1 x 120/140mm fan slot (1 x 140mm exhaust fan included)
2 x 120/140mm fan slot

USB 3.0 x 2, Type-C* x 1, Audio x 1, MIC x 1
Optional PS2 (ATX)
Compatible up to 15.3" in length, width restriction – 6.5"
163 ~ 172mm**
140 ~ 200mm***
222mm (W) x 510mm (H) x 467mm (D), 52.8 Liters

Place your hard drive on the tray and secure with included screws. Caution: the secure with mount of hard drive
tray should be place at the same side with your hard drive connector jack.

Positionieren Sie Ihre Festplatte am Einschub und sichern Sie sie mit den mitgelieferten Schrauben.
Achtung: Die Befestigung des Festplatteneinschubs sollte auf der Seite erfolgen, auf der sich auch der
Festplattenanschluss befindet.

Placez votre disque dur sur le plateau et fixez-le avec les vis fournies. Attention : le support du plateau de
disque dur doit être du même côté que la prise du connecteur de disque dur.

Coloque su disco duro en la bandeja y fíjelo con los tornillos incluidos. Aviso: el disco duro montado en la
bandeja debería situarse en el mismo lado de su conector para disco duro.

(2) Power supply limitation

190mm
232mm

Collocare il disco rigido nel cassetto e fissarlo utilizzando le viti fornite in dotazione . Attenzione: la parte con le
prese del cassetto contenente il disco rigido deve essere collocata sullo stesso lato del connettore del disco rigido.

Поместите жесткий диск в лоток и закрепите его винтами из комплекта . Внимание! Крепление лотка
выполняется с той же стороны, где расположен соединительный разъем для жесткого диска.

請將您的硬碟安裝置硬碟托盤中,並以內附螺絲鎖固後,請注意鎖固硬碟托盤的方向必須與硬碟連接線接頭一致。

请将您的硬盘安装置硬盘托盘中,并以内附螺丝锁固后,请注意锁固硬盘托盘的方向必须与硬盘连接线接头一致。

ハードディスクをトレイに置き、付属のネジで固定します。注意：ハードディスクドライブトレイは、ハー
ドディスクコネクタジャック と同じ向きに設置してください。

하드 드라이브를 트레이에 올려 놓고 제 공된 나사를 사용하여 고정합니 다. 주의: 하드 드라이브 트레이는
하드 드라이브 커넥터 잭과 동 일한 면에 놓고 장착해야 합니다.

The KL07 was designed to accommodate oversized components, but we still recommend referring to the following dimension guidelines:

(1) CPU Cooler limitation

9mm

163mm

The KL07 supports power supply with depth of up to 140~200mm. Корпус KL07 допускает установку блока питания глубиной до 140~200 мм.

Das KL07 unterstützt Netzteile mit einer Tiefe von bis zu 140~200 mm.

Le KL07 est compatible avec les alimentations d'une profondeur inférieure ou égale
à 140~200mm.

La KL07 acepta fuentes de alimentación con una profundidad de hasta 140~200mm.

KL07 supporta alimentatori con profondità fino a 140~200mm.

KL07可支援至長度140~200mm的PSU。

KL07可支援至长度140~200mm的PSU。

KL07は最高140~200mmの奥行きの電源をサポートします。

KL07은 140~200mm의 깊이를 갖는 파워 서플라이까지 지원합니다.

(3) Graphics card / expansion card length limitation

390mm

165mm

9mm

KL07 can support 15.3" (390mm) long cards, which covers all retail consumer
graphics cards available on the market.

KL07 unterstützt Karten bis 15.3" (390mm). Dies deckt alle auf dem Markt
verfügbare Consumer-Grafikkarten ab.

KL07 peut supporter des cartes de jusqu'à 15.3" (390mm) de long, ce qui couvre
toutes les cartes graphiques disponibles actuellement sur le marché.

Корпус KL07 позволяет устанавливать 15.3" (390mm) карты, что покрывает
весь доступный рынок розничной продажи графических карт.

KL07支援到PCIE規格定義的上限15.3" (390mm)顯示卡,市面上零售的消費及顯示
卡應該都能安裝。

KL07支持到PCIE规格定义的上限15.3" (390mm)显示卡,市面上零售的消费及显示
卡应该都能安装。

9mm

Height limitation for CPU cooler is 163mm with 29mm clearance
over the motherboard’s top edge.

Höhenbeschränkung für CPU-Kühler 163 mm mit einem Freiraum
von 29 mm oberhalb der Motherboard-Oberkante.

La limitation de hauteur des refroidisseurs de processeurs est 163mm
avec un espace de 29mm au-dessus du bord supérieur de la carte mere.

La limitación de altura para disipadores de CPU es de 163mm con un
espacio libre de 29mm sobre el borde superior de la placa base.

La limitazione dell’altezza del dissipatore di calore CPU è di 163 millimetri
con uno spazio libero di 29mm sopra il bordo superiore della scheda madre.

29mm

Ограничение по высоте для системы охлаждения процессора составляет
163 мм с 29-мм зазором над верхним краем системной платы.

Cooler限高是163mm,Cooler外源允許超出主機板上邊界29mm。

Cooler限高是163mm,Cooler外源允许超出主板上边界29mm。

CPUクーラーの高さ限度は、マザーボード上側の余裕29mmを取って、
163mmです。

CPU 쿨러의 높이 제한은 163mm로서 메인보드 상단 가장자리 위로의
허용 오차가 29mm입니다.

La KL07 puede aceptar tarjetas largas de 15.3" (390mm), lo que cubre todas las
tarjetas gráficas para usuario disponibles en el mercado.

KL07 supporta schede lunghe 15.3" (390mm), coprendo tutte le schede grafiche
consumer in vendita al dettaglio disponibili sul mercato.

(4) 360mm Radiator Limitation

KL07は15.3" (390mm)長のカードに対応します。これは市場に出回るリテール
消費用グラフィックスカード全てを網羅します。

KL07는15.3" (390mm)의 긴 카드를 지원할 수 있으며, 이는 시중에 출시된 모든
소매 소비자용 그래픽 카드를 포함합니다.

65mm

105mm