SIIG CE-H23411-S1, CE-H23311-S1, CE-H23211-S1 User Reference Manual

1

4K HDR HDMI 2.0 & USB 2.0

Extender Over HDBaseT

with RS-232 & IR

User Reference Guide

04-1123A

P/N: CE-H23411-S1

2

Introduction

The 4K HDR HDMI 2.0 & USB 2.0 Extender Over HDBaseT
with RS-232 & IR extends HDMI transmission distance

up to 330ft (100m) at 1080p or 230ft (70m) at 4K over
an economical CAT5e/6 cable. Plus, bi-directional
extension of IR, RS232 and USB 2.0 for advanced and
interactive applications.

Features and Benefits

 Supports video resolutions up to 4Kx2K @60Hz

(4:4:4 8bit) or HDR 4Kx2K @60Hz (4:2:0 10bit) to
deliver crystal clear images

 7.1 Digital sound capabilities as well as

uncompressed LPCM and compressed DTS-HD
& Dolby True HD for a state-of-the-art
entertainment experience

 PoC (Power over Cable) feature, only one power

adapter is required to power both the transmitter
and receiver units

 Bi-directional IR sensors allow you to remotely

control the HDMI source device from the remote
display side or control the remote display from
the source device side

 Supports 3D, CEC, HDMI 2.0 and HDCP 2.2

protocols. Bandwidth up to 18Gb/s

 ARC feature allows you to free the audio from on-

demand content within a Smart TV with ARC

 Premium metal housing with ventilation panels

improve heat dissipation for enhanced safety
and stability

 Built-in phoenix connector for RS232 control

signal transmission or firmware update. Included
mounting ears for easy installation

3

Specifications

Package Contents

 4K HDR HDMI 2.0 & USB 2.0 Extender (TX & RX)
 Power adapter
 IR blaster extension cable & IR receiver extension

cable

 Mounting ears & Screw kit
 Terminal block
 User Reference Guide

Compliance HDMI 2.0a / HDCP 2.2

Resolution HDR 4Kx2K @60Hz (4:2:0 10bit) / 4Kx2K@60Hz (4:4:4 8bit)

Audio LPCM, DTS-HD and Dolby True HD (7.1CH)

Transmission Distance

HDR 4Kx2K @60Hz: Up to 70m
1080p @60Hz: Up to 100m

IR Signal Frequency 20KHz to 60KHz

Connectors

TX:
1x 19-pin HDMI Type-A, Female
1x 3.5mm audio jack (Stereo)
1x 3.5mm IR Blaster
1x 3.5mm IR Receiver
1x 9-pin USB Type-A, Female (Device)
1x Micro USB, Female (Host)
1x Dip switch
1x 3-pin phoenix connector (RS-232)

3x LED indicator (Power/Link/Signal)
1x 8-pin RJ45
1x Power jack
RX:
1x 19-pin HDMI Type-A, Female
1x 3.5mm audio jack (Stereo)
1x S/PDIF output
1x 3.5mm IR Blaster
1x 3.5mm IR Receiver
1x 9-pin USB Type-A, Female (Device)
1x Micro USB, Female (Host)
1x Dip switch
1x 3-pin phoenix connector (RS-232)

3x LED indicator (Power/Link/Signal)
1x 8-pin RJ45
1x Power jack

Housing Material Metal

Power Adapter

Input: AC 100-240V/ 50~60Hz
Output: DC 24V / 1A

4

IR Out

Note: With PoC technology, only one power
adapter is needed to power both the
Transmitter and Receiver.

Figure 1: Transmitter (TX) - front

Layout

HDMI In

Stereo Input

IR In

 HDMI In: Connect your HDMI source here with

an HDMI cable (cable not included)

 Stereo Input: Provides a channel to extend an

external analog audio to receiver over HDBaseT

 IR Out: Infrared 3.5mm socket. Plug IR Blaster

extension cable here. See instructions on page 8.

 IR In: Infrared 3.5mm socket. Plug IR Receiver

extension cable here. See instructions on page 8.

USB Type-A

Micro USB

RS-232

RJ45

Dip Switch

Power Jack

Figure 2: Transmitter (TX) - rear