SIGLENT SPA1010 Series User Manual
User Manual
SPA1010 Series Power Amplifier
UM60010-E01A
2015 SIGLENT TECHNOLOGIES CO,.LTD
SIGLENT
SPA1010 User Manual I
Declaration
Copyright © by SIGLENT TECHNOLOGIES CO,.LTD. All rights reserved.
Contents in this Manual are not allowed to copy, extract and translate
before being allowed by SIGLENT.
SIGLENT
SPA1010 User Manual
General Safety Summary
Carefully read the following safety precautions to avoid person injury and prevent
damage to the instrument and any products connected to it. To avoid potential
hazards, please use the instrument as specified.
Only qualified technician should perform service procedures
To Avoid Fire or Personal Injure
Use Proper Power Line
Use only the special power line of the instrument which approved by local state.
Connect the Signal Wire Correctly
The potential of the signal wire is equal to the earth, so do not connect the signal
wire to a high voltage. Do not touch the exposed contacts or components.
Look Over All Terminals’ Ratings
To avoid fire or electric shock, please look over all ratings and sign instruction of
the instrument. Before connecting the instrument, please read the manual
carefully to gain more information about the ratings.
Not Operate with Suspected Failures
If you suspect that there is a damage of the instrument, please let a qualified
service personnel check it.
Avoid Circuit or Wire Exposed Components Exposed
Do not touch exposed contacts or components when the power is on.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep the surface of the instrument clean and dry.
II
SIGLENT
SPA1010 User Manual
Safety Terms and Symbols
Terms used on the instrument. Terms may appear on the instrument:
DANGER: Indicates an injury or hazard that may be immediately happen.
WARNING: Indicates an injury or hazard that may be not immediately happen.
CAUTION: Indicates that a potential damage to the instrument or other property
might occur.
Symbols used on the instrument. Symbols may appear on the instrument:
Hazardous Protective Warning Earth Ground Power
Voltage Earth Ground Switch
III
SIGLENT
SPA1010 User Manual
SPA1010 Power Amplifier Introduction
The amplifier is one of the options provided for SIGLENT Function/Arbitrary
Waveform Generators, with up to 1MHz full power bandwidth and higher than 90
V/μs slew rate, which can be used in fast constructions of a test platform in
connection with all SIGLENT SDG series products, and as a single power
amplifier in coordination with other generators.
Features
Easily and neatly communicate with SDG through the USB interface;
Enables to set the Gain (x1 or x10);
Up to 15kΩ output impedance;
The integrated output protection circuit (overcurrent protection and internal
overtemperature protection) provided with ensures the instrument is working
stably and safely;
Compact size, easy to carry and use.
IV
Loading...