User Guide
o Welcome
o Overview
o Components
o Supported Prods.
o Safety Notices
o Specifications
o Installation
o Using AirBooster
o Troubleshooting
o Service
o Contact Us
2110195 Rev D
November 1999
Welcome to the AirBooster™ 350 RF amplifier
The AirBooster 350 is an intelligent RF amplifier for boosting some Sierra
Wireless Class III (600mW) CDPD devices to Class I (3W). The amplifier is
an "intelligent" booster in that it does not simply apply a fixed gain to a
varying input RF level like a linear amplifier would. Instead, the AirBooster
amplifier takes a constant RF level from the CDPD device and applies as
much gain as the CDPD system requires at that moment.
A GPS Option is also available, adding a GPS receiver inside the package.
This is available as a field upgrade kit or pre-installed at the factory.
Documentation related to GPS is covered in a separate section.
Your AirBooster 350 Components
All AirBooster 350 packages will include the following components:
AirBooster
™
350 RF amplifier.●
Power Cable.●
Sierra Wireless Product CD-ROM with this Documentation including a
3 Year Warranty.
●
4 Screws with Washers.●
Mounting Template.●
Quick Start Guide.●
Units with the factory installed GPS option will also include:
DB-9 Serial Cable.
●
Additional accessories are available from Sierra Wireless. These include:
RF Connector Cables (an assortment of lengths and connector options
are available).
●
GPS Options (Factory Installed or Field Upgrade Kit).●
GPS antennas (Magnetic or Hard Mount options).●
For details on these and other Sierra Wireless accessories contact sales or
visit our web site.
Supported Products
At the time of this writing, the AirBooster 350 RF amplifier is supported by
the following Sierra Wireless products:
AirCard
®
350 CDPD Adapter●
SB300 OEM Module●
Additional Sierra Wireless products may be added to this list. Consult our
web site for a complete and current list.
CAUTION - The AirBooster 350 amplifier is designed to be
used exclusively with supported Sierra Wireless products.
Attaching non-supported devices will not harm the device or the
amplifier but will severely impair transmissions from the device.
o Welcome (top)
o Overview
o Safety Notices
o Hazards
o Regulatory
o Patents
o Specifications
Important Notice
Because of the nature of wireless communications, transmission and
reception of data can never be guaranteed. Data may be delayed, corrupted
(i.e., have errors) or be totally lost. Although significant delays or losses of
data are rare when wireless devices such as the AirBooster 350 RF amplifier
are used in a normal manner with a well-constructed network, they should not
be used in situations where failure to transmit or receive data could result in
damage of any kind to the user or any other party, including but not limited to
personal injury, death, or loss of property. Sierra Wireless, Inc. accepts no
responsibility for damages of any kind resulting from delays or errors in data
transmitted or received using the AirBooster 350 RF amplifier, or for failure
of the AirBooster 350 amplifier to transmit or receive such data.
Safety and Hazards
Do not operate the AirBooster amplifier in areas where blasting is in
progress, where explosive atmospheres may be present, near medical
equipment, near life support equipment, or any equipment which may be
susceptible to any form of radio interference. In such areas, the host
communications device MUST BE TURNED OFF. The RF amplifier can
transmit signals that could interfere with this equipment.
Do not operate your data transmitter in close proximity to any aircraft,
whether the aircraft is on the ground or in flight. Near aircraft, the host
communications device MUST BE TURNED OFF. When operating, the
AirBooster RF amplifier can transmit signals that could interfere with various
onboard systems.
The driver or operator of any vehicle should not operate a wireless data
device while in control of a vehicle. Doing so will detract from the driver or
operator's control and operation of that vehicle. In some states and provinces,
operating such communications devices while in control of a vehicle is an
offence.
WARNING - The FCC has developed guidelines to reduce any
possible hazard due to exposure of the human body to
electromagnetic radiation (i.e. to radio waves). This device is
approved for operation with specific Sierra Wireless modem
transmitters using a 3.0dBd or a 3.4dBd vehicle-mount antenna
with at least 2dB cable loss, as described in the filing. The
combination of cable loss and antenna gain must not exceed an
overall gain of 1dB. The antenna installation must provide a
separation distance of 20cm (8") or more between the antenna
and all persons to satisfy MPE compliance.